fix rom address decoder

[fpga-games] / galaxian / t80_ip / T80sed.vhd

-- ****
-- T80(b) core. In an effort to merge and maintain bug fixes ....
--
--
-- Ver 300 started tidyup
-- MikeJ March 2005
-- Latest version from www.fpgaarcade.com (original www.opencores.org)
--
-- ****
-- ** CUSTOM 2 CLOCK MEMORY ACCESS FOR PACMAN, MIKEJ **
--
-- Z80 compatible microprocessor core, synchronous top level with clock enable
-- Different timing than the original z80
-- Inputs needs to be synchronous and outputs may glitch
--
-- Version : 0238
--
-- Copyright (c) 2001-2002 Daniel Wallner (jesus@opencores.org)
--
-- All rights reserved
--
-- Redistribution and use in source and synthezised forms, with or without
-- modification, are permitted provided that the following conditions are met:
--
-- Redistributions of source code must retain the above copyright notice,
-- this list of conditions and the following disclaimer.
--
-- Redistributions in synthesized form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
--
-- Neither the name of the author nor the names of other contributors may
-- be used to endorse or promote products derived from this software without
-- specific prior written permission.
--
-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
-- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-- POSSIBILITY OF SUCH DAMAGE.
--
-- Please report bugs to the author, but before you do so, please
-- make sure that this is not a derivative work and that
-- you have the latest version of this file.
--
-- The latest version of this file can be found at:
--      http://www.opencores.org/cvsweb.shtml/t80/
--
-- Limitations :
--
-- File history :
--
--      0235 : First release
--
--      0236 : Added T2Write generic
--
--      0237 : Fixed T2Write with wait state
--
--      0238 : Updated for T80 interface change
--
--      0242 : Updated for T80 interface change
--

library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.T80_Pack.all;

entity T80sed is
	port(
		RESET_n         : in  std_logic;
		CLK_n           : in  std_logic;
		CLKEN           : in  std_logic;
		WAIT_n          : in  std_logic;
		INT_n           : in  std_logic;
		NMI_n           : in  std_logic;
		BUSRQ_n         : in  std_logic;
		M1_n            : out std_logic;
		MREQ_n          : out std_logic;
		IORQ_n          : out std_logic;
		RD_n            : out std_logic;
		WR_n            : out std_logic;
		RFSH_n          : out std_logic;
		HALT_n          : out std_logic;
		BUSAK_n         : out std_logic;
		A               : out std_logic_vector(15 downto 0);
		DI              : in  std_logic_vector(7 downto 0);
		DO              : out std_logic_vector(7 downto 0)
	);
end T80sed;

architecture rtl of T80sed is

	signal IntCycle_n   : std_logic;
	signal NoRead       : std_logic;
	signal Write        : std_logic;
	signal IORQ         : std_logic;
	signal DI_Reg       : std_logic_vector(7 downto 0);
	signal MCycle       : std_logic_vector(2 downto 0);
	signal TState       : std_logic_vector(2 downto 0);

begin

	u0 : T80
		generic map(
			Mode      => 0,
			IOWait    => 1)
		port map(
			CEN        => CLKEN,
			M1_n       => M1_n,
			IORQ       => IORQ,
			NoRead     => NoRead,
			Write      => Write,
			RFSH_n     => RFSH_n,
			HALT_n     => HALT_n,
			WAIT_n     => Wait_n,
			INT_n      => INT_n,
			NMI_n      => NMI_n,
			RESET_n    => RESET_n,
			BUSRQ_n    => BUSRQ_n,
			BUSAK_n    => BUSAK_n,
			CLK_n      => CLK_n,
			A          => A,
			DInst      => DI,
			DI         => DI_Reg,
			DO         => DO,
			MC         => MCycle,
			TS         => TState,
			IntCycle_n => IntCycle_n);

	process (RESET_n, CLK_n)
	begin
		if RESET_n = '0' then
			RD_n <= '1';
			WR_n <= '1';
			IORQ_n <= '1';
			MREQ_n <= '1';
			DI_Reg <= "00000000";
		elsif CLK_n'event and CLK_n = '1' then
			if CLKEN = '1' then
				RD_n <= '1';
				WR_n <= '1';
				IORQ_n <= '1';
				MREQ_n <= '1';
				if MCycle = "001" then
					if TState = "001" or (TState = "010" and Wait_n = '0') then
						RD_n <= not IntCycle_n;
						MREQ_n <= not IntCycle_n;
						IORQ_n <= IntCycle_n;
					end if;
					if TState = "011" then
						MREQ_n <= '0';
					end if;
				else
					if (TState = "001" or TState = "010") and NoRead = '0' and Write = '0' then
						RD_n <= '0';
						IORQ_n <= not IORQ;
						MREQ_n <= IORQ;
					end if;
						if ((TState = "001") or (TState = "010")) and Write = '1' then
							WR_n <= '0';
							IORQ_n <= not IORQ;
							MREQ_n <= IORQ;
						end if;
				end if;
				if TState = "010" and Wait_n = '1' then
					DI_Reg <= DI;
				end if;
			end if;
		end if;
	end process;

end;