/* flasher for HomeMatic-devices supporting OTA updates
*
- * Copyright (c) 2014 Michael Gernoth <michael@gernoth.net>
+ * Copyright (c) 2014-17 Michael Gernoth <michael@gernoth.net>
+ * Copyright (c) 2017 noansi (TSCULFW-support)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to
#include "version.h"
#include "hmcfgusb.h"
#include "culfw.h"
+#include "hmuartlgw.h"
#include "util.h"
#define MAX_RETRIES 5
uint32_t hmid = 0;
uint32_t my_hmid = 0;
-char key[16] = {0};
+uint8_t key[16] = {0};
int32_t kNo = -1;
/* Maximum payloadlen supported by IO */
uint32_t max_payloadlen = NORMAL_MAX_PAYLOAD;
-enum device_type {
- DEVICE_TYPE_HMCFGUSB,
- DEVICE_TYPE_CULFW,
-};
-
-struct ota_dev {
- int type;
- struct hmcfgusb_dev *hmcfgusb;
- struct culfw_dev *culfw;
-};
-
enum message_type {
MESSAGE_TYPE_E = 1,
MESSAGE_TYPE_R = 2,
+ MESSAGE_TYPE_B = 3,
+};
+
+enum hmuartlgw_state {
+ HMUARTLGW_STATE_GET_HMID,
+ HMUARTLGW_STATE_GET_FIRMWARE,
+ HMUARTLGW_STATE_GET_CREDITS,
+ HMUARTLGW_STATE_DONE,
+ HMUARTLGW_STATE_WAIT_APP,
+ HMUARTLGW_STATE_ACK_APP,
};
struct recv_data {
int speed;
uint16_t version;
uint8_t credits;
+ enum hmuartlgw_state uartlgw_state;
+ uint8_t uartlgw_version[3];
+ uint8_t is_TSCUL; // tsculfw
};
static int parse_hmcfgusb(uint8_t *buf, int buf_len, void *data)
{
struct recv_data *rdata = data;
int pos = 0;
+ int rpos = 0; // read index
- memset(rdata, 0, sizeof(struct recv_data));
+ memset(rdata->message, 0, sizeof(rdata->message));
+ rdata->message_type = 0;
if (buf_len <= 3)
return 0;
if (buf[1] == 's')
return 0;
- while(validate_nibble(buf[(pos * 2) + 1]) &&
- validate_nibble(buf[(pos * 2) + 2]) &&
- (pos + 1 < buf_len)) {
- rdata->message[pos] = ascii_to_nibble(buf[(pos * 2) + 1]) << 4;
- rdata->message[pos] |= ascii_to_nibble(buf[(pos * 2) + 2]);
+ if ((buf[1] == 'p') || (buf[1] == 't')) // tsculfw: ping or set timestamp command echoed?
+ return 0;
+
+ if (buf[1] == '?') {// tsculfw: unknown command
+ fprintf(stderr, "unknown ASKSIN command sent\n");
+ return 0;
+ }
+
+ if (buf[1] == 'F') { // tsculfw: timestamp message?
+ rdata->is_TSCUL = 1;
+ if (buf_len <= (3+14)) // tsculfw: reasonable len?
+ return 0;
+ if (!validate_nibble(buf[3]) || !validate_nibble(buf[4])) // tsculfw: hex?
+ return 0;
+
+ rdata->credits = ascii_to_nibble(buf[3]); // tsculfw: coarse credits info, 0 = full credits (1800 x10ms) available
+
+ //AFF1B000053A1010F0520CB1122334BD57110
+ switch(ascii_to_nibble(buf[4]) & 0x7) { // tsculfw: message type?
+ case 0: // tsculfw: send fail message repeat fail or AES Auth error
+ fprintf(stderr, "send didn't complete, repeat fail or AES Auth error\n");
+ return 0;
+ case 1: // tsculfw: received message
+ rpos += 7; // tsculfw: ignore timestamp data for now
+ break;
+ case 2: // tsculfw: ping answer
+ return 0;
+ case 3: // tsculfw: send success
+ rdata->message_type = MESSAGE_TYPE_B;
+ return 0;
+ case 4: // tsculfw: send fail channel busy message
+ fprintf(stderr, "CCA didn't complete, too much traffic\n");
+ return 0;
+ case 5: // tsculfw: send fail credits message
+ fprintf(stderr, "send didn't complete, not enough credits left\n");
+ return 0;
+ case 6: // tsculfw: send timestamp fail message no buffer or send message length error
+ fprintf(stderr, "send didn't complete, not enough credits left -> wait 30 minutes with TSCUL powered and not reset\n");
+ return 0;
+ case 7: // tsculfw: send fail due to cc1101 TX-FIFO underflow error message
+ fprintf(stderr, "send didn't complete, cc1101 TX-FIFO underflow\n");
+ return 0;
+ default:
+ break;
+ }
+ }
+
+ while(validate_nibble(buf[(rpos * 2) + 1]) &&
+ validate_nibble(buf[(rpos * 2) + 2]) &&
+ (rpos + 1 < buf_len)) {
+ rdata->message[pos] = ascii_to_nibble(buf[(rpos * 2) + 1]) << 4;
+ rdata->message[pos] |= ascii_to_nibble(buf[(rpos * 2) + 2]);
pos++;
+ rpos++;
}
if (hmid && (SRC(rdata->message) != hmid))
char *s;
char *e;
+ if (!strncmp((char*)buf, "VTS", 3)) { // tsculfw: "VTS x.xx NNNNNN"
+ rdata->is_TSCUL = 1;
+ rdata->version = 0xffff;
+ break;
+ }
+
s = ((char*)buf) + 2;
e = strchr(s, '.');
if (!e) {
*e = '\0';
v = atoi(s);
rdata->version |= v;
+
+ s = e + 1;
+ e = strchr(s, ' ');
+ if (!e) {
+ break;
+ }
+ *e = '\0';
+ if (!strcmp(s, "a-culfw")) {
+ rdata->version = 0xffff;
+ }
}
break;
+ case 'E':
+ {
+ if (!strncmp((char*)buf, "ERR:CCA", 7)) {
+ fprintf(stderr, "CCA didn't complete, too much traffic\n");
+ }
+ break;
+ }
default:
fprintf(stderr, "Unknown response from CUL: %s", buf);
return 0;
return 1;
}
-int send_hm_message(struct ota_dev *dev, struct recv_data *rdata, uint8_t *msg)
+static int parse_hmuartlgw(enum hmuartlgw_dst dst, uint8_t *buf, int buf_len, void *data)
+{
+ struct recv_data *rdata = data;
+
+ if (dst == HMUARTLGW_OS) {
+ switch (rdata->uartlgw_state) {
+ case HMUARTLGW_STATE_GET_FIRMWARE:
+ if (buf[0] == HMUARTLGW_OS_ACK) {
+ rdata->uartlgw_version[0] = buf[5];
+ rdata->uartlgw_version[1] = buf[6];
+ rdata->uartlgw_version[2] = buf[7];
+ rdata->uartlgw_state = HMUARTLGW_STATE_DONE;
+ }
+ break;
+ case HMUARTLGW_STATE_GET_CREDITS:
+ if (buf[0] == HMUARTLGW_OS_ACK) {
+ rdata->credits = buf[2] / 2;
+ rdata->uartlgw_state = HMUARTLGW_STATE_DONE;
+ }
+ break;
+ default:
+ break;
+ }
+ return 0;
+ }
+
+ switch(buf[0]) {
+ case HMUARTLGW_APP_ACK:
+ if (rdata->uartlgw_state == HMUARTLGW_STATE_GET_HMID) {
+ my_hmid = (buf[4] << 16) | (buf[5] << 8) | buf[6];
+ }
+
+ rdata->status = buf[1];
+ rdata->message_type = MESSAGE_TYPE_R;
+ rdata->uartlgw_state = HMUARTLGW_STATE_ACK_APP;
+#if 0
+ hexdump(buf, buf_len, "ACK Status: ");
+#endif
+
+ break;
+ case HMUARTLGW_APP_RECV:
+ if ((!hmid) ||
+ ((buf[7] == ((hmid >> 16) & 0xff)) &&
+ (buf[8] == ((hmid >> 8) & 0xff)) &&
+ (buf[9] == (hmid & 0xff)))) {
+ memset(rdata->message, 0, sizeof(rdata->message));
+ memcpy(rdata->message + 1, buf + 4, buf_len - 4);
+ rdata->message[LEN] = buf_len - 4;
+ rdata->message_type = MESSAGE_TYPE_E;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 1;
+}
+
+int send_wait_hmuartlgw(struct hm_dev *dev, struct recv_data *rdata, uint8_t *data, int data_len,
+ enum hmuartlgw_dst dst, enum hmuartlgw_state srcstate,
+ enum hmuartlgw_state dststate)
+{
+ int cnt = 5;
+
+ do {
+ rdata->uartlgw_state = srcstate;
+ hmuartlgw_send(dev->hmuartlgw, data, data_len, dst);
+ do { hmuartlgw_poll(dev->hmuartlgw, 500); } while (rdata->uartlgw_state != dststate);
+ if (rdata->status != HMUARTLGW_ACK_EINPROGRESS)
+ break;
+ usleep(200*1000);
+ } while (cnt--);
+ if (rdata->status == HMUARTLGW_ACK_EINPROGRESS) {
+ fprintf(stderr, "IO thinks it is busy, you might have to reset it!\n");
+ return 0;
+ }
+
+ return 1;
+}
+
+int send_hm_message(struct hm_dev *dev, struct recv_data *rdata, uint8_t *msg)
{
static uint32_t id = 1;
struct timeval tv;
memcpy(&out[0x0f], msg, msg[0] + 1);
- memset(rdata, 0, sizeof(struct recv_data));
+ memset(rdata->message, 0, sizeof(rdata->message));
+ rdata->message_type = 0;
hmcfgusb_send(dev->hmcfgusb, out, sizeof(out), 1);
while (1) {
buf[2 + (i * 2) ] = '\r';
buf[2 + (i * 2) + 1] = '\n';
- memset(rdata, 0, sizeof(struct recv_data));
+ memset(rdata->message, 0, sizeof(rdata->message));
+ rdata->message_type = 0;
if (culfw_send(dev->culfw, buf, 2 + (i * 2) + 1) == 0) {
fprintf(stderr, "culfw_send failed!\n");
exit(EXIT_FAILURE);
}
+ /* Wait for TSCUL to ACK send */
+ if (rdata->is_TSCUL) {
+ do {
+ errno = 0;
+ pfd = culfw_poll(dev->culfw, 200);
+ if ((pfd < 0) && errno) {
+ if (errno != ETIMEDOUT) {
+ perror("\n\nculfw_poll");
+ exit(EXIT_FAILURE);
+ }
+ }
+ } while (rdata->message_type != MESSAGE_TYPE_B);
+ }
+
if (msg[CTL] & 0x20) {
- int cnt = 3;
+ int cnt = 5;
int pfd;
do {
errno = 0;
if (rdata->message_type == MESSAGE_TYPE_E) {
if (rdata->message[TYPE] == 0x02) {
if (rdata->message[PAYLOAD] == 0x04) {
- printf("AES request received but not implemented for culfw!\n");
+ int32_t req_kNo;
+ uint8_t challenge[6];
+ uint8_t respbuf[16];
+ uint8_t *resp;
+
+ if (rdata->is_TSCUL) {
+ printf("AES handled by TSCUL\n");
+ break;
+ }
+
+ req_kNo = rdata->message[rdata->message[LEN]] / 2;
+ memcpy(challenge, &(rdata->message[PAYLOAD+1]), 6);
+
+ if (req_kNo != kNo) {
+ fprintf(stderr, "AES request for unknown key %d!\n", req_kNo);
+ } else {
+ resp = hm_sign(key, challenge, msg, NULL, respbuf);
+ if (resp) {
+ uint8_t rbuf[64];
+
+ memset(rbuf, 0, sizeof(rbuf));
+ rbuf[MSGID] = rdata->message[MSGID];
+ rbuf[CTL] = rdata->message[CTL];
+ rbuf[TYPE] = 0x03;
+ SET_SRC(rbuf, DST(rdata->message));
+ SET_DST(rbuf, SRC(rdata->message));
+ memcpy(&(rbuf[PAYLOAD]), resp, 16);
+ SET_LEN_FROM_PAYLOADLEN(rbuf, 16);
+
+ usleep(110000); /* Determined by a fair dice roll */
+ return send_hm_message(dev, rdata, rbuf);
+ }
+ }
} else if (rdata->message[PAYLOAD] >= 0x80 && rdata->message[PAYLOAD] <= 0x8f) {
- printf("NACK\n");
+ fprintf(stderr, "NACK\n");
} else { /* ACK or ACKinfo */
break;
}
} else {
- printf("Unexpected message received: ");
+ fprintf(stderr, "Unexpected message received: ");
for (i = 0; i < rdata->message[LEN]; i++) {
- printf("%02x", rdata->message[i+1]);
+ fprintf(stderr, "%02x", rdata->message[i+1]);
}
- printf("\n");
+ fprintf(stderr, "\n");
}
}
} while(cnt--);
return 0;
}
}
+
+ /* Delay for non-TSCUL */
+ if (!rdata->is_TSCUL) {
+ usleep(50*1000);
+ }
+ }
+ break;
+ case DEVICE_TYPE_HMUARTLGW:
+ memset(out, 0, sizeof(out));
+
+ out[0] = HMUARTLGW_APP_SEND;
+ out[1] = 0x00;
+ out[2] = 0x00;
+ out[3] = (msg[CTL] & 0x10) ? 0x01 : 0x00; /* Burst?! */
+ memcpy(&out[4], &msg[1], msg[0]);
+
+ memset(rdata->message, 0, sizeof(rdata->message));
+ rdata->message_type = 0;
+ hmuartlgw_send(dev->hmuartlgw, out, msg[0] + 4, HMUARTLGW_APP);
+
+ while (1) {
+ if (rdata->message_type == MESSAGE_TYPE_R) {
+ if ((rdata->status == 0x02) ||
+ (rdata->status == 0x03) ||
+ (rdata->status == 0x0c)) {
+ break;
+ } else {
+ if (rdata->status == 0x0d) {
+ fprintf(stderr, "\nAES handshake failed!\n");
+ } else if (rdata->status == 0x04 || rdata->status == 0x06) {
+ fprintf(stderr, "\nMissing ACK!\n");
+ } else {
+ fprintf(stderr, "\nInvalid status: %04x\n", rdata->status);
+ }
+ return 0;
+ }
+ }
+ errno = 0;
+ pfd = hmuartlgw_poll(dev->hmuartlgw, 1000);
+ if ((pfd < 0) && errno) {
+ if (errno != ETIMEDOUT) {
+ perror("\n\nhmcfgusb_poll");
+ exit(EXIT_FAILURE);
+ }
+ }
}
break;
}
return 1;
}
-static int switch_speed(struct ota_dev *dev, struct recv_data *rdata, uint8_t speed)
+static int switch_speed(struct hm_dev *dev, struct recv_data *rdata, uint8_t speed)
{
uint8_t out[0x40];
int pfd;
return culfw_send(dev->culfw, "Ar\r\n", 4);
}
break;
+ case DEVICE_TYPE_HMUARTLGW:
+ if (speed == 100) {
+ out[0] = HMUARTLGW_OS_UPDATE_MODE;
+ out[1] = 0xe9;
+ out[2] = 0xca;
+ hmuartlgw_send(dev->hmuartlgw, out, 3, HMUARTLGW_OS);
+ } else {
+ out[0] = HMUARTLGW_OS_NORMAL_MODE;
+ hmuartlgw_send(dev->hmuartlgw, out, 1, HMUARTLGW_OS);
+ }
+ break;
}
return 1;
fprintf(stderr, "\t-c device\tenable CUL-mode with CUL at path \"device\"\n");
fprintf(stderr, "\t-b bps\t\tuse CUL with speed \"bps\" (default: %u)\n", DEFAULT_CUL_BPS);
fprintf(stderr, "\t-l\t\tlower payloadlen (required for devices with little RAM, e.g. CUL v2 and CUL v4)\n");
+ fprintf(stderr, "\t-S serial\tuse HM-CFG-USB with given serial\n");
+ fprintf(stderr, "\t-U device\tuse HM-MOD-UART on given device\n");
fprintf(stderr, "\t-h\t\tthis help\n");
fprintf(stderr, "\nOptional parameters for automatically sending device to bootloader\n");
fprintf(stderr, "\t-C\t\tHMID of central (3 hex-bytes, no prefix, e.g. ABCDEF)\n");
fprintf(stderr, "\t-D\t\tHMID of device (3 hex-bytes, no prefix, e.g. 123456)\n");
fprintf(stderr, "\t-K\t\tKNO:KEY AES key-number and key (hex) separated by colon (Fhem hmKey attribute)\n");
- fprintf(stderr, "\t\t\tAES is currently not supported when using a culfw-device!\n");
}
int main(int argc, char **argv)
char *culfw_dev = NULL;
char *endptr = NULL;
unsigned int bps = DEFAULT_CUL_BPS;
- struct ota_dev dev;
+ struct hm_dev dev;
struct recv_data rdata;
uint8_t out[0x40];
uint8_t *pos;
uint8_t msgid = 0x1;
uint16_t len;
struct firmware *fw;
+ char *hmcfgusb_serial = NULL;
+ char *uart = NULL;
int block;
int pfd;
int debug = 0;
printf("HomeMatic OTA flasher version " VERSION "\n\n");
- while((opt = getopt(argc, argv, "b:c:f:hls:C:D:K:")) != -1) {
+ while((opt = getopt(argc, argv, "b:c:f:hls:C:D:K:S:U:")) != -1) {
switch (opt) {
case 'b':
bps = atoi(optarg);
endptr += 2;
}
break;
+ case 'S':
+ hmcfgusb_serial = optarg;
+ break;
+ case 'U':
+ uart = optarg;
+ break;
case 'h':
case ':':
case '?':
exit(EXIT_FAILURE);
memset(&rdata, 0, sizeof(rdata));
- memset(&dev, 0, sizeof(struct ota_dev));
+ memset(&dev, 0, sizeof(struct hm_dev));
if (culfw_dev) {
- if (kNo != -1) {
- fprintf(stderr, "\nAES currently not supported with culfw-device!\n");
- flash_ota_syntax(argv[0]);
- exit(EXIT_FAILURE);
- }
-
printf("Opening culfw-device at path %s with speed %u\n", culfw_dev, bps);
dev.culfw = culfw_init(culfw_dev, bps, parse_culfw, &rdata);
if (!dev.culfw) {
break;
}
- printf("culfw-device firmware version: %u.%02u\n",
- (rdata.version >> 8) & 0xff,
- rdata.version & 0xff);
+ printf("culfw-device firmware version: ");
+ if (rdata.version != 0xffff) {
+ printf("%u.%02u\n",
+ (rdata.version >> 8) & 0xff,
+ rdata.version & 0xff);
+ } else {
+ if (rdata.is_TSCUL) {
+ culfw_send(dev.culfw, "At1\r\n", 5); // tsculfw: try switch on timestamp protocol
+ printf("tsculfw\n");
+ culfw_flush(dev.culfw);
+ culfw_send(dev.culfw, "ApTiMeStAmP\r\n", 13); // tsculfw: send ping to get credits info
+ pfd = culfw_poll(dev.culfw, 1000);
+ if ((pfd < 0) && errno) {
+ if (errno != ETIMEDOUT) {
+ perror("\n\nhmcfgusb_poll");
+ exit(EXIT_FAILURE);
+ }
+ }
+ if (rdata.credits) { // tsculfw: maximum credits available?
+ fprintf(stderr, "\n\ntsculfw does not report full credits, try again later\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if (kNo > 0) {
+ char keybuf[64] = { 0 };
+ int i;
+
+ printf("Setting AES-key\n");
+ snprintf(keybuf, sizeof(keybuf) - 1, "Ak%02x", kNo - 1);
+
+ for (i = 0; i < 16; i++) {
+ keybuf[4 + (i * 2)] = nibble_to_ascii((key[i] >> 4) & 0xf);
+ keybuf[4 + (i * 2) + 1] = nibble_to_ascii(key[i] & 0xf);
+ }
+ keybuf[4 + (i * 2) ] = '\r';
+ keybuf[4 + (i * 2) + 1] = '\n';
+ culfw_send(dev.culfw, keybuf, strlen(keybuf)); // tsculfw: send ping to get credits info
+ pfd = culfw_poll(dev.culfw, 1000);
+ if ((pfd < 0) && errno) {
+ if (errno != ETIMEDOUT) {
+ perror("\n\nhmcfgusb_poll");
+ exit(EXIT_FAILURE);
+ }
+ }
+ }
+ }
+ else {
+ printf("a-culfw\n");
+ }
+ }
if (rdata.version < 0x013a) {
fprintf(stderr, "\nThis version does _not_ support firmware upgrade mode, you need at least 1.58!\n");
exit(EXIT_FAILURE);
}
+ } else if (uart) {
+ uint32_t new_hmid = my_hmid;
+
+ hmuartlgw_set_debug(debug);
+
+ dev.hmuartlgw = hmuart_init(uart, parse_hmuartlgw, &rdata, 1);
+ if (!dev.hmuartlgw) {
+ fprintf(stderr, "Can't initialize HM-MOD-UART\n");
+ exit(EXIT_FAILURE);
+ }
+ dev.type = DEVICE_TYPE_HMUARTLGW;
+
+ out[0] = HMUARTLGW_APP_GET_HMID;
+ send_wait_hmuartlgw(&dev, &rdata, out, 1, HMUARTLGW_APP, HMUARTLGW_STATE_GET_HMID, HMUARTLGW_STATE_ACK_APP);
+
+ out[0] = HMUARTLGW_OS_GET_FIRMWARE;
+ send_wait_hmuartlgw(&dev, &rdata, out, 1, HMUARTLGW_OS, HMUARTLGW_STATE_GET_FIRMWARE, HMUARTLGW_STATE_DONE);
+
+ out[0] = HMUARTLGW_OS_GET_CREDITS;
+ send_wait_hmuartlgw(&dev, &rdata, out, 1, HMUARTLGW_OS, HMUARTLGW_STATE_GET_CREDITS, HMUARTLGW_STATE_DONE);
+
+ printf("HM-MOD-UART firmware version: %u.%u.%u, used credits: %u%%\n",
+ rdata.uartlgw_version[0],
+ rdata.uartlgw_version[1],
+ rdata.uartlgw_version[2],
+ rdata.credits);
+
+ if (rdata.credits >= 40) {
+ printf("\nRebooting HM-MOD-UART to avoid running out of credits\n");
+
+ hmuartlgw_enter_bootloader(dev.hmuartlgw);
+ hmuartlgw_enter_app(dev.hmuartlgw);
+ }
+
+ printf("\nHM-MOD-UART opened\n\n");
+
+ if (new_hmid && (my_hmid != new_hmid)) {
+ printf("Changing hmid from %06x to %06x\n", my_hmid, new_hmid);
+
+ out[0] = HMUARTLGW_APP_SET_HMID;
+ out[1] = (new_hmid >> 16) & 0xff;
+ out[2] = (new_hmid >> 8) & 0xff;
+ out[3] = new_hmid & 0xff;
+ send_wait_hmuartlgw(&dev, &rdata, out, 4, HMUARTLGW_APP, HMUARTLGW_STATE_WAIT_APP, HMUARTLGW_STATE_ACK_APP);
+
+ my_hmid = new_hmid;
+ }
+
+ if (kNo > 0) {
+ printf("Setting AES-key\n");
+
+ memset(out, 0, sizeof(out));
+ out[0] = HMUARTLGW_APP_SET_CURRENT_KEY;
+ memcpy(&(out[1]), key, 16);
+ out[17] = kNo;
+ send_wait_hmuartlgw(&dev, &rdata, out, 18, HMUARTLGW_APP, HMUARTLGW_STATE_WAIT_APP, HMUARTLGW_STATE_ACK_APP);
+
+ memset(out, 0, sizeof(out));
+ out[0] = HMUARTLGW_APP_SET_OLD_KEY;
+ memcpy(&(out[1]), key, 16);
+ out[17] = kNo;
+ send_wait_hmuartlgw(&dev, &rdata, out, 18, HMUARTLGW_APP, HMUARTLGW_STATE_WAIT_APP, HMUARTLGW_STATE_ACK_APP);
+ }
} else {
uint32_t new_hmid = my_hmid;
hmcfgusb_set_debug(debug);
- dev.hmcfgusb = hmcfgusb_init(parse_hmcfgusb, &rdata);
+ dev.hmcfgusb = hmcfgusb_init(parse_hmcfgusb, &rdata, hmcfgusb_serial);
if (!dev.hmcfgusb) {
fprintf(stderr, "Can't initialize HM-CFG-USB\n");
exit(EXIT_FAILURE);
hmcfgusb_close(dev.hmcfgusb);
}
sleep(1);
- } while (((dev.hmcfgusb = hmcfgusb_init(parse_hmcfgusb, &rdata)) == NULL) || (!dev.hmcfgusb->bootloader));
+ } while (((dev.hmcfgusb = hmcfgusb_init(parse_hmcfgusb, &rdata, hmcfgusb_serial)) == NULL) || (!dev.hmcfgusb->bootloader));
}
if (dev.hmcfgusb->bootloader) {
hmcfgusb_close(dev.hmcfgusb);
}
sleep(1);
- } while (((dev.hmcfgusb = hmcfgusb_init(parse_hmcfgusb, &rdata)) == NULL) || (dev.hmcfgusb->bootloader));
+ } while (((dev.hmcfgusb = hmcfgusb_init(parse_hmcfgusb, &rdata, hmcfgusb_serial)) == NULL) || (dev.hmcfgusb->bootloader));
}
}
}
if (hmid && my_hmid) {
+ switch (dev.type) {
+ case DEVICE_TYPE_HMCFGUSB:
+ printf("Adding HMID\n");
+
+ memset(out, 0, sizeof(out));
+ out[0] = '+';
+ out[1] = (hmid >> 16) & 0xff;
+ out[2] = (hmid >> 8) & 0xff;
+ out[3] = hmid & 0xff;
+
+ hmcfgusb_send(dev.hmcfgusb, out, sizeof(out), 1);
+ break;
+ case DEVICE_TYPE_HMUARTLGW:
+ printf("Adding HMID\n");
+
+ memset(out, 0, sizeof(out));
+ out[0] = HMUARTLGW_APP_ADD_PEER;
+ out[1] = (hmid >> 16) & 0xff;
+ out[2] = (hmid >> 8) & 0xff;
+ out[3] = hmid & 0xff;
+ out[4] = (kNo > 0) ? kNo : 0x00; /* KeyIndex */
+ out[5] = 0x00; /* WakeUp? */
+ out[6] = 0x00; /* WakeUp? */
+
+ send_wait_hmuartlgw(&dev, &rdata, out, 7, HMUARTLGW_APP, HMUARTLGW_STATE_WAIT_APP, HMUARTLGW_STATE_ACK_APP);
+
+ break;
+ }
printf("Sending device with hmid %06x to bootloader\n", hmid);
- out[MSGID] = msgid++;
out[CTL] = 0x30;
out[TYPE] = 0x11;
SET_SRC(out, my_hmid);
cnt = 3;
do {
+ out[MSGID] = msgid++;
if (send_hm_message(&dev, &rdata, out)) {
break;
}
pfd = culfw_poll(dev.culfw, 1000);
break;
case DEVICE_TYPE_HMCFGUSB:
- default:
pfd = hmcfgusb_poll(dev.hmcfgusb, 1000);
break;
+ case DEVICE_TYPE_HMUARTLGW:
+ pfd = hmuartlgw_poll(dev.hmuartlgw, 1000);
+ break;
+ default:
+ pfd = -1;
+ break;
}
if ((pfd < 0) && errno) {
printf("Device with serial %s (HMID: %06x) entered firmware-update-mode\n", serial, hmid);
- if (dev.type == DEVICE_TYPE_HMCFGUSB) {
- printf("Adding HMID\n");
+ switch (dev.type) {
+ case DEVICE_TYPE_HMCFGUSB:
+ printf("Adding HMID\n");
- memset(out, 0, sizeof(out));
- out[0] = '+';
- out[1] = (hmid >> 16) & 0xff;
- out[2] = (hmid >> 8) & 0xff;
- out[3] = hmid & 0xff;
+ memset(out, 0, sizeof(out));
+ out[0] = '+';
+ out[1] = (hmid >> 16) & 0xff;
+ out[2] = (hmid >> 8) & 0xff;
+ out[3] = hmid & 0xff;
- hmcfgusb_send(dev.hmcfgusb, out, sizeof(out), 1);
+ hmcfgusb_send(dev.hmcfgusb, out, sizeof(out), 1);
+ break;
+ case DEVICE_TYPE_HMUARTLGW:
+ printf("Adding HMID\n");
+
+ memset(out, 0, sizeof(out));
+ out[0] = HMUARTLGW_APP_ADD_PEER;
+ out[1] = (hmid >> 16) & 0xff;
+ out[2] = (hmid >> 8) & 0xff;
+ out[3] = hmid & 0xff;
+ out[4] = 0x00; /* KeyIndex */
+ out[5] = 0x00; /* WakeUp? */
+ out[6] = 0x00; /* WakeUp? */
+
+ send_wait_hmuartlgw(&dev, &rdata, out, 7, HMUARTLGW_APP, HMUARTLGW_STATE_WAIT_APP, HMUARTLGW_STATE_ACK_APP);
+
+ break;
}
switchcnt = 3;
if (((pos + payloadlen) - &(fw->fw[block][2])) == len)
ack = 1;
- memset(&rdata, 0, sizeof(rdata));
+ memset(rdata.message, 0, sizeof(rdata.message));
+ rdata.message_type = 0;
memset(out, 0, sizeof(out));
}
printf("Waiting for device to reboot\n");
+ rdata.message_type = MESSAGE_TYPE_R;
cnt = 10;
+ if (dev.type == DEVICE_TYPE_HMUARTLGW)
+ cnt = 200; /* FIXME */
do {
errno = 0;
switch(dev.type) {
pfd = culfw_poll(dev.culfw, 1000);
break;
case DEVICE_TYPE_HMCFGUSB:
- default:
pfd = hmcfgusb_poll(dev.hmcfgusb, 1000);
break;
+ case DEVICE_TYPE_HMUARTLGW:
+ pfd = hmuartlgw_poll(dev.hmuartlgw, 1000);
+ break;
+ default:
+ pfd = -1;
+ break;
}
if ((pfd < 0) && errno) {
if (errno != ETIMEDOUT) {
projects / hmcfgusb / blobdiff