/* flasher for HomeMatic-devices supporting OTA updates
*
- * Copyright (c) 2014 Michael Gernoth <michael@gernoth.net>
+ * Copyright (c) 2014-17 Michael Gernoth <michael@gernoth.net>
+ * Copyright (c) 2017 noansi (TSCULFW-support)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to
#include "hm.h"
#include "version.h"
#include "hmcfgusb.h"
+#include "culfw.h"
+#include "hmuartlgw.h"
+#include "util.h"
+
+#define MAX_RETRIES 5
+#define NORMAL_MAX_PAYLOAD 37
+#define LOWER_MAX_PAYLOAD 17
+
+extern char *optarg;
uint32_t hmid = 0;
uint32_t my_hmid = 0;
+uint8_t key[16] = {0};
+int32_t kNo = -1;
+
+/* Maximum payloadlen supported by IO */
+uint32_t max_payloadlen = NORMAL_MAX_PAYLOAD;
enum message_type {
- MESSAGE_TYPE_E,
- MESSAGE_TYPE_R,
+ MESSAGE_TYPE_E = 1,
+ MESSAGE_TYPE_R = 2,
+ MESSAGE_TYPE_B = 3,
+};
+
+enum hmuartlgw_state {
+ HMUARTLGW_STATE_GET_HMID,
+ HMUARTLGW_STATE_GET_FIRMWARE,
+ HMUARTLGW_STATE_GET_CREDITS,
+ HMUARTLGW_STATE_DONE,
+ HMUARTLGW_STATE_WAIT_APP,
+ HMUARTLGW_STATE_ACK_APP,
};
struct recv_data {
enum message_type message_type;
uint16_t status;
int speed;
- uint16_t hmcfgusb_version;
+ uint16_t version;
+ uint8_t credits;
+ enum hmuartlgw_state uartlgw_state;
+ uint8_t uartlgw_version[3];
+ uint8_t is_TSCUL; // tsculfw
};
static int parse_hmcfgusb(uint8_t *buf, int buf_len, void *data)
rdata->speed = buf[1];
break;
case 'H':
- rdata->hmcfgusb_version = (buf[11] << 8) | buf[12];
+ rdata->version = (buf[11] << 8) | buf[12];
+ rdata->credits = buf[36];
my_hmid = (buf[0x1b] << 16) | (buf[0x1c] << 8) | buf[0x1d];
break;
default:
return 1;
}
-int send_hm_message(struct hmcfgusb_dev *dev, struct recv_data *rdata, uint8_t *msg)
+static int parse_culfw(uint8_t *buf, int buf_len, void *data)
+{
+ struct recv_data *rdata = data;
+ int pos = 0;
+ int rpos = 0; // read index
+
+ memset(rdata->message, 0, sizeof(rdata->message));
+ rdata->message_type = 0;
+
+ if (buf_len <= 3)
+ return 0;
+
+ switch(buf[0]) {
+ case 'A':
+ if (buf[1] == 's')
+ return 0;
+
+ if ((buf[1] == 'p') || (buf[1] == 't')) // tsculfw: ping or set timestamp command echoed?
+ return 0;
+
+ if (buf[1] == '?') {// tsculfw: unknown command
+ fprintf(stderr, "unknown ASKSIN command sent\n");
+ return 0;
+ }
+
+ if (buf[1] == 'F') { // tsculfw: timestamp message?
+ rdata->is_TSCUL = 1;
+ if (buf_len <= (3+14)) // tsculfw: reasonable len?
+ return 0;
+ if (!validate_nibble(buf[3]) || !validate_nibble(buf[4])) // tsculfw: hex?
+ return 0;
+
+ rdata->credits = ascii_to_nibble(buf[3]); // tsculfw: coarse credits info, 0 = full credits (1800 x10ms) available
+
+ //AFF1B000053A1010F0520CB1122334BD57110
+ switch(ascii_to_nibble(buf[4]) & 0x7) { // tsculfw: message type?
+ case 0: // tsculfw: send fail message repeat fail or AES Auth error
+ fprintf(stderr, "send didn't complete, repeat fail or AES Auth error\n");
+ return 0;
+ case 1: // tsculfw: received message
+ rpos += 7; // tsculfw: ignore timestamp data for now
+ break;
+ case 2: // tsculfw: ping answer
+ return 0;
+ case 3: // tsculfw: send success
+ rdata->message_type = MESSAGE_TYPE_B;
+ return 0;
+ case 4: // tsculfw: send fail channel busy message
+ fprintf(stderr, "CCA didn't complete, too much traffic\n");
+ return 0;
+ case 5: // tsculfw: send fail credits message
+ fprintf(stderr, "send didn't complete, not enough credits left\n");
+ return 0;
+ case 6: // tsculfw: send timestamp fail message no buffer or send message length error
+ fprintf(stderr, "send didn't complete, not enough credits left -> wait 30 minutes with TSCUL powered and not reset\n");
+ return 0;
+ case 7: // tsculfw: send fail due to cc1101 TX-FIFO underflow error message
+ fprintf(stderr, "send didn't complete, cc1101 TX-FIFO underflow\n");
+ return 0;
+ default:
+ break;
+ }
+ }
+
+ while(validate_nibble(buf[(rpos * 2) + 1]) &&
+ validate_nibble(buf[(rpos * 2) + 2]) &&
+ (rpos + 1 < buf_len)) {
+ rdata->message[pos] = ascii_to_nibble(buf[(rpos * 2) + 1]) << 4;
+ rdata->message[pos] |= ascii_to_nibble(buf[(rpos * 2) + 2]);
+ pos++;
+ rpos++;
+ }
+
+ if (hmid && (SRC(rdata->message) != hmid))
+ return 0;
+
+ rdata->message_type = MESSAGE_TYPE_E;
+ break;
+ case 'V':
+ {
+ uint8_t v;
+ char *s;
+ char *e;
+
+ if (!strncmp((char*)buf, "VTS", 3)) { // tsculfw: "VTS x.xx NNNNNN"
+ rdata->is_TSCUL = 1;
+ rdata->version = 0xffff;
+ break;
+ }
+
+ s = ((char*)buf) + 2;
+ e = strchr(s, '.');
+ if (!e) {
+ fprintf(stderr, "Unknown response from CUL: %s", buf);
+ return 0;
+ }
+ *e = '\0';
+ v = atoi(s);
+ rdata->version = v << 8;
+
+ s = e + 1;
+ e = strchr(s, ' ');
+ if (!e) {
+ fprintf(stderr, "Unknown response from CUL: %s", buf);
+ return 0;
+ }
+ *e = '\0';
+ v = atoi(s);
+ rdata->version |= v;
+
+ s = e + 1;
+ e = strchr(s, ' ');
+ if (!e) {
+ break;
+ }
+ *e = '\0';
+ if (!strcmp(s, "a-culfw")) {
+ rdata->version = 0xffff;
+ }
+ }
+ break;
+ case 'E':
+ {
+ if (!strncmp((char*)buf, "ERR:CCA", 7)) {
+ fprintf(stderr, "CCA didn't complete, too much traffic\n");
+ }
+ break;
+ }
+ default:
+ fprintf(stderr, "Unknown response from CUL: %s", buf);
+ return 0;
+ break;
+ }
+
+ return 1;
+}
+
+static int parse_hmuartlgw(enum hmuartlgw_dst dst, uint8_t *buf, int buf_len, void *data)
+{
+ struct recv_data *rdata = data;
+
+ if (dst == HMUARTLGW_OS) {
+ switch (rdata->uartlgw_state) {
+ case HMUARTLGW_STATE_GET_FIRMWARE:
+ if (buf[0] == HMUARTLGW_OS_ACK) {
+ rdata->uartlgw_version[0] = buf[5];
+ rdata->uartlgw_version[1] = buf[6];
+ rdata->uartlgw_version[2] = buf[7];
+ rdata->uartlgw_state = HMUARTLGW_STATE_DONE;
+ }
+ break;
+ case HMUARTLGW_STATE_GET_CREDITS:
+ if (buf[0] == HMUARTLGW_OS_ACK) {
+ rdata->credits = buf[2] / 2;
+ rdata->uartlgw_state = HMUARTLGW_STATE_DONE;
+ }
+ break;
+ default:
+ break;
+ }
+ return 0;
+ }
+
+ switch(buf[0]) {
+ case HMUARTLGW_APP_ACK:
+ if (rdata->uartlgw_state == HMUARTLGW_STATE_GET_HMID) {
+ my_hmid = (buf[4] << 16) | (buf[5] << 8) | buf[6];
+ }
+
+ rdata->status = buf[1];
+ rdata->message_type = MESSAGE_TYPE_R;
+ rdata->uartlgw_state = HMUARTLGW_STATE_ACK_APP;
+#if 0
+ hexdump(buf, buf_len, "ACK Status: ");
+#endif
+
+ break;
+ case HMUARTLGW_APP_RECV:
+ if ((!hmid) ||
+ ((buf[7] == ((hmid >> 16) & 0xff)) &&
+ (buf[8] == ((hmid >> 8) & 0xff)) &&
+ (buf[9] == (hmid & 0xff)))) {
+ memset(rdata->message, 0, sizeof(rdata->message));
+ memcpy(rdata->message + 1, buf + 4, buf_len - 4);
+ rdata->message[LEN] = buf_len - 4;
+ rdata->message_type = MESSAGE_TYPE_E;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 1;
+}
+
+int send_wait_hmuartlgw(struct hm_dev *dev, struct recv_data *rdata, uint8_t *data, int data_len,
+ enum hmuartlgw_dst dst, enum hmuartlgw_state srcstate,
+ enum hmuartlgw_state dststate)
+{
+ int cnt = 5;
+
+ do {
+ rdata->uartlgw_state = srcstate;
+ hmuartlgw_send(dev->hmuartlgw, data, data_len, dst);
+ do { hmuartlgw_poll(dev->hmuartlgw, 500); } while (rdata->uartlgw_state != dststate);
+ if (rdata->status != HMUARTLGW_ACK_EINPROGRESS)
+ break;
+ usleep(200*1000);
+ } while (cnt--);
+ if (rdata->status == HMUARTLGW_ACK_EINPROGRESS) {
+ fprintf(stderr, "IO thinks it is busy, you might have to reset it!\n");
+ return 0;
+ }
+
+ return 1;
+}
+
+int send_hm_message(struct hm_dev *dev, struct recv_data *rdata, uint8_t *msg)
{
static uint32_t id = 1;
struct timeval tv;
uint8_t out[0x40];
int pfd;
- if (gettimeofday(&tv, NULL) == -1) {
- perror("gettimeofay");
- return 0;
- }
+ switch(dev->type) {
+ case DEVICE_TYPE_HMCFGUSB:
+ if (gettimeofday(&tv, NULL) == -1) {
+ perror("gettimeofay");
+ return 0;
+ }
+
+ memset(out, 0, sizeof(out));
- memset(out, 0, sizeof(out));
+ out[0] = 'S';
+ out[1] = (id >> 24) & 0xff;
+ out[2] = (id >> 16) & 0xff;
+ out[3] = (id >> 8) & 0xff;
+ out[4] = id & 0xff;
+ out[10] = 0x01;
+ out[11] = (tv.tv_usec >> 24) & 0xff;
+ out[12] = (tv.tv_usec >> 16) & 0xff;
+ out[13] = (tv.tv_usec >> 8) & 0xff;
+ out[14] = tv.tv_usec & 0xff;
+
+ memcpy(&out[0x0f], msg, msg[0] + 1);
+
+ memset(rdata->message, 0, sizeof(rdata->message));
+ rdata->message_type = 0;
+ hmcfgusb_send(dev->hmcfgusb, out, sizeof(out), 1);
+
+ while (1) {
+ if (rdata->message_type == MESSAGE_TYPE_R) {
+ if (((rdata->status & 0xdf) == 0x01) ||
+ ((rdata->status & 0xdf) == 0x02)) {
+ break;
+ } else {
+ if ((rdata->status & 0xff00) == 0x0400) {
+ fprintf(stderr, "\nOut of credits!\n");
+ } else if ((rdata->status & 0xff) == 0x08) {
+ fprintf(stderr, "\nMissing ACK!\n");
+ } else if ((rdata->status & 0xff) == 0x30) {
+ fprintf(stderr, "\nUnknown AES-key requested!\n");
+ } else {
+ fprintf(stderr, "\nInvalid status: %04x\n", rdata->status);
+ }
+ return 0;
+ }
+ }
+ errno = 0;
+ pfd = hmcfgusb_poll(dev->hmcfgusb, 1000);
+ if ((pfd < 0) && errno) {
+ if (errno != ETIMEDOUT) {
+ perror("\n\nhmcfgusb_poll");
+ exit(EXIT_FAILURE);
+ }
+ }
+ }
+ break;
+ case DEVICE_TYPE_CULFW:
+ {
+ char buf[256];
+ int i;
+
+ memset(buf, 0, sizeof(buf));
+ buf[0] = 'A';
+ buf[1] = 's';
+ for (i = 0; i < msg[0] + 1; i++) {
+ buf[2 + (i * 2)] = nibble_to_ascii((msg[i] >> 4) & 0xf);
+ buf[2 + (i * 2) + 1] = nibble_to_ascii(msg[i] & 0xf);
+ }
+ buf[2 + (i * 2) ] = '\r';
+ buf[2 + (i * 2) + 1] = '\n';
- out[0] = 'S';
- out[1] = (id >> 24) & 0xff;
- out[2] = (id >> 16) & 0xff;
- out[3] = (id >> 8) & 0xff;
- out[4] = id & 0xff;
- out[10] = 0x01;
- out[11] = (tv.tv_usec >> 24) & 0xff;
- out[12] = (tv.tv_usec >> 16) & 0xff;
- out[13] = (tv.tv_usec >> 8) & 0xff;
- out[14] = tv.tv_usec & 0xff;
-
+ memset(rdata->message, 0, sizeof(rdata->message));
+ rdata->message_type = 0;
+ if (culfw_send(dev->culfw, buf, 2 + (i * 2) + 1) == 0) {
+ fprintf(stderr, "culfw_send failed!\n");
+ exit(EXIT_FAILURE);
+ }
- memcpy(&out[0x0f], msg, msg[0] + 1);
+ /* Wait for TSCUL to ACK send */
+ if (rdata->is_TSCUL) {
+ do {
+ errno = 0;
+ pfd = culfw_poll(dev->culfw, 200);
+ if ((pfd < 0) && errno) {
+ if (errno != ETIMEDOUT) {
+ perror("\n\nculfw_poll");
+ exit(EXIT_FAILURE);
+ }
+ }
+ } while (rdata->message_type != MESSAGE_TYPE_B);
+ }
- memset(rdata, 0, sizeof(struct recv_data));
- hmcfgusb_send(dev, out, sizeof(out), 1);
+ if (msg[CTL] & 0x20) {
+ int cnt = 5;
+ int pfd;
+ do {
+ errno = 0;
+ pfd = culfw_poll(dev->culfw, 200);
+ if ((pfd < 0) && errno) {
+ if (errno != ETIMEDOUT) {
+ perror("\n\nculfw_poll");
+ exit(EXIT_FAILURE);
+ }
+ }
+ if (rdata->message_type == MESSAGE_TYPE_E) {
+ if (rdata->message[TYPE] == 0x02) {
+ if (rdata->message[PAYLOAD] == 0x04) {
+ int32_t req_kNo;
+ uint8_t challenge[6];
+ uint8_t respbuf[16];
+ uint8_t *resp;
+
+ if (rdata->is_TSCUL) {
+ printf("AES handled by TSCUL\n");
+ break;
+ }
+
+ req_kNo = rdata->message[rdata->message[LEN]] / 2;
+ memcpy(challenge, &(rdata->message[PAYLOAD+1]), 6);
+
+ if (req_kNo != kNo) {
+ fprintf(stderr, "AES request for unknown key %d!\n", req_kNo);
+ } else {
+ resp = hm_sign(key, challenge, msg, NULL, respbuf);
+ if (resp) {
+ uint8_t rbuf[64];
+
+ memset(rbuf, 0, sizeof(rbuf));
+ rbuf[MSGID] = rdata->message[MSGID];
+ rbuf[CTL] = rdata->message[CTL];
+ rbuf[TYPE] = 0x03;
+ SET_SRC(rbuf, DST(rdata->message));
+ SET_DST(rbuf, SRC(rdata->message));
+ memcpy(&(rbuf[PAYLOAD]), resp, 16);
+ SET_LEN_FROM_PAYLOADLEN(rbuf, 16);
+
+ usleep(110000); /* Determined by a fair dice roll */
+ return send_hm_message(dev, rdata, rbuf);
+ }
+ }
+ } else if (rdata->message[PAYLOAD] >= 0x80 && rdata->message[PAYLOAD] <= 0x8f) {
+ fprintf(stderr, "NACK\n");
+ } else { /* ACK or ACKinfo */
+ break;
+ }
+ } else {
+ fprintf(stderr, "Unexpected message received: ");
+ for (i = 0; i < rdata->message[LEN]; i++) {
+ fprintf(stderr, "%02x", rdata->message[i+1]);
+ }
+ fprintf(stderr, "\n");
+ }
+ }
+ } while(cnt--);
+
+ if (cnt == -1) {
+ fprintf(stderr, "\nMissing ACK!\n");
+ return 0;
+ }
+ }
- while (1) {
- if (rdata->message_type == MESSAGE_TYPE_R) {
- if (((rdata->status & 0xff) == 0x01) ||
- ((rdata->status & 0xff) == 0x02)) {
- break;
- } else {
- fprintf(stderr, "\nInvalid status: %04x\n", rdata->status);
- return 0;
+ /* Delay for non-TSCUL */
+ if (!rdata->is_TSCUL) {
+ usleep(50*1000);
+ }
}
- }
- errno = 0;
- pfd = hmcfgusb_poll(dev, 1);
- if ((pfd < 0) && errno) {
- if (errno != ETIMEDOUT) {
- perror("\n\nhmcfgusb_poll");
- exit(EXIT_FAILURE);
+ break;
+ case DEVICE_TYPE_HMUARTLGW:
+ memset(out, 0, sizeof(out));
+
+ out[0] = HMUARTLGW_APP_SEND;
+ out[1] = 0x00;
+ out[2] = 0x00;
+ out[3] = (msg[CTL] & 0x10) ? 0x01 : 0x00; /* Burst?! */
+ memcpy(&out[4], &msg[1], msg[0]);
+
+ memset(rdata->message, 0, sizeof(rdata->message));
+ rdata->message_type = 0;
+ hmuartlgw_send(dev->hmuartlgw, out, msg[0] + 4, HMUARTLGW_APP);
+
+ while (1) {
+ if (rdata->message_type == MESSAGE_TYPE_R) {
+ if ((rdata->status == 0x02) ||
+ (rdata->status == 0x03) ||
+ (rdata->status == 0x0c)) {
+ break;
+ } else {
+ if (rdata->status == 0x0d) {
+ fprintf(stderr, "\nAES handshake failed!\n");
+ } else if (rdata->status == 0x04 || rdata->status == 0x06) {
+ fprintf(stderr, "\nMissing ACK!\n");
+ } else {
+ fprintf(stderr, "\nInvalid status: %04x\n", rdata->status);
+ }
+ return 0;
+ }
+ }
+ errno = 0;
+ pfd = hmuartlgw_poll(dev->hmuartlgw, 1000);
+ if ((pfd < 0) && errno) {
+ if (errno != ETIMEDOUT) {
+ perror("\n\nhmcfgusb_poll");
+ exit(EXIT_FAILURE);
+ }
+ }
}
- }
+ break;
}
id++;
return 1;
}
-static int switch_speed(struct hmcfgusb_dev *dev, struct recv_data *rdata, uint8_t speed)
+static int switch_speed(struct hm_dev *dev, struct recv_data *rdata, uint8_t speed)
{
uint8_t out[0x40];
int pfd;
printf("Entering %uk-mode\n", speed);
- memset(out, 0, sizeof(out));
- out[0] = 'G';
- out[1] = speed;
-
- hmcfgusb_send(dev, out, sizeof(out), 1);
-
- while (1) {
- errno = 0;
- pfd = hmcfgusb_poll(dev, 1);
- if ((pfd < 0) && errno) {
- if (errno != ETIMEDOUT) {
- perror("\n\nhmcfgusb_poll");
- exit(EXIT_FAILURE);
+ switch(dev->type) {
+ case DEVICE_TYPE_HMCFGUSB:
+ memset(out, 0, sizeof(out));
+ out[0] = 'G';
+ out[1] = speed;
+
+ hmcfgusb_send(dev->hmcfgusb, out, sizeof(out), 1);
+
+ while (1) {
+ errno = 0;
+ pfd = hmcfgusb_poll(dev->hmcfgusb, 1000);
+ if ((pfd < 0) && errno) {
+ if (errno != ETIMEDOUT) {
+ perror("\n\nhmcfgusb_poll");
+ exit(EXIT_FAILURE);
+ }
+ }
+ if (rdata->speed == speed)
+ break;
+ }
+ break;
+ case DEVICE_TYPE_CULFW:
+ if (speed == 100) {
+ return culfw_send(dev->culfw, "AR\r\n", 4);
+ } else {
+ return culfw_send(dev->culfw, "Ar\r\n", 4);
+ }
+ break;
+ case DEVICE_TYPE_HMUARTLGW:
+ if (speed == 100) {
+ out[0] = HMUARTLGW_OS_UPDATE_MODE;
+ out[1] = 0xe9;
+ out[2] = 0xca;
+ hmuartlgw_send(dev->hmuartlgw, out, 3, HMUARTLGW_OS);
+ } else {
+ out[0] = HMUARTLGW_OS_NORMAL_MODE;
+ hmuartlgw_send(dev->hmuartlgw, out, 1, HMUARTLGW_OS);
}
- }
- if (rdata->speed == speed)
break;
}
return 1;
}
+void flash_ota_syntax(char *prog)
+{
+ fprintf(stderr, "Syntax: %s parameters options\n\n", prog);
+ fprintf(stderr, "Mandatory parameters:\n");
+ fprintf(stderr, "\t-f firmware.eq3\tfirmware file to flash\n");
+ fprintf(stderr, "\t-s SERIAL\tserial of device to flash (optional when using -D)\n");
+ fprintf(stderr, "\nOptional parameters:\n");
+ fprintf(stderr, "\t-c device\tenable CUL-mode with CUL at path \"device\"\n");
+ fprintf(stderr, "\t-b bps\t\tuse CUL with speed \"bps\" (default: %u)\n", DEFAULT_CUL_BPS);
+ fprintf(stderr, "\t-l\t\tlower payloadlen (required for devices with little RAM, e.g. CUL v2 and CUL v4)\n");
+ fprintf(stderr, "\t-S serial\tuse HM-CFG-USB with given serial\n");
+ fprintf(stderr, "\t-U device\tuse HM-MOD-UART on given device\n");
+ fprintf(stderr, "\t-h\t\tthis help\n");
+ fprintf(stderr, "\nOptional parameters for automatically sending device to bootloader\n");
+ fprintf(stderr, "\t-C\t\tHMID of central (3 hex-bytes, no prefix, e.g. ABCDEF)\n");
+ fprintf(stderr, "\t-D\t\tHMID of device (3 hex-bytes, no prefix, e.g. 123456)\n");
+ fprintf(stderr, "\t-K\t\tKNO:KEY AES key-number and key (hex) separated by colon (Fhem hmKey attribute)\n");
+}
+
int main(int argc, char **argv)
{
const char twiddlie[] = { '-', '\\', '|', '/' };
- const uint8_t switch_msg[] = { 0x10, 0x5B, 0x11, 0xF8, 0x15, 0x47 };
- struct hmcfgusb_dev *dev;
+ const uint8_t cc1101_regs[] = { 0x10, 0x5B, 0x11, 0xF8, 0x15, 0x47 };
+ char *fw_file = NULL;
+ char *serial = NULL;
+ char *culfw_dev = NULL;
+ char *endptr = NULL;
+ unsigned int bps = DEFAULT_CUL_BPS;
+ struct hm_dev dev;
struct recv_data rdata;
uint8_t out[0x40];
uint8_t *pos;
uint8_t msgid = 0x1;
uint16_t len;
struct firmware *fw;
+ char *hmcfgusb_serial = NULL;
+ char *uart = NULL;
int block;
int pfd;
int debug = 0;
int switchcnt = 0;
int msgnum = 0;
int switched = 0;
+ int opt;
printf("HomeMatic OTA flasher version " VERSION "\n\n");
- if (argc != 3) {
- if (argc == 1)
- fprintf(stderr, "Missing firmware filename!\n\n");
+ while((opt = getopt(argc, argv, "b:c:f:hls:C:D:K:S:U:")) != -1) {
+ switch (opt) {
+ case 'b':
+ bps = atoi(optarg);
+ break;
+ case 'c':
+ culfw_dev = optarg;
+ break;
+ case 'f':
+ fw_file = optarg;
+ break;
+ case 'l':
+ printf("Reducing payload-len from %d to %d\n", max_payloadlen, LOWER_MAX_PAYLOAD);
+ max_payloadlen = LOWER_MAX_PAYLOAD;
+ break;
+ case 's':
+ serial = optarg;
+ break;
+ case 'C':
+ my_hmid = strtoul(optarg, &endptr, 16);
+ if (*endptr != '\0') {
+ fprintf(stderr, "Invalid central HMID!\n\n");
+ flash_ota_syntax(argv[0]);
+ exit(EXIT_FAILURE);
+ }
+ break;
+ case 'D':
+ hmid = strtoul(optarg, &endptr, 16);
+ if (*endptr != '\0') {
+ fprintf(stderr, "Invalid device HMID!\n\n");
+ flash_ota_syntax(argv[0]);
+ exit(EXIT_FAILURE);
+ }
+ break;
+ case 'K':
+ kNo = strtoul(optarg, &endptr, 10);
+ if (*endptr != ':') {
+ fprintf(stderr, "Invalid key number!\n\n");
+ flash_ota_syntax(argv[0]);
+ exit(EXIT_FAILURE);
+ }
+ endptr++;
+ for (cnt = 0; cnt < 16; cnt++) {
+ if (*endptr == '\0' || *(endptr+1) == '\0' ||
+ !validate_nibble(*endptr) ||
+ !validate_nibble(*(endptr+1))) {
+ fprintf(stderr, "Invalid key!\n\n");
+ flash_ota_syntax(argv[0]);
+ exit(EXIT_FAILURE);
+ }
+ key[cnt] = ascii_to_nibble(*endptr) << 4 | ascii_to_nibble(*(endptr+1));
+ endptr += 2;
+ }
+ break;
+ case 'S':
+ hmcfgusb_serial = optarg;
+ break;
+ case 'U':
+ uart = optarg;
+ break;
+ case 'h':
+ case ':':
+ case '?':
+ default:
+ flash_ota_syntax(argv[0]);
+ exit(EXIT_FAILURE);
+ break;
- if (argc == 2)
- fprintf(stderr, "Missing serial!\n\n");
+ }
+ }
- fprintf(stderr, "Syntax: %s firmware.eq3 SERIALNUMBER\n\n", argv[0]);
+ if (!fw_file || (!serial && !hmid)) {
+ flash_ota_syntax(argv[0]);
exit(EXIT_FAILURE);
}
- fw = firmware_read_firmware(argv[1], debug);
+ fw = firmware_read_firmware(fw_file, debug);
if (!fw)
exit(EXIT_FAILURE);
- hmcfgusb_set_debug(debug);
-
memset(&rdata, 0, sizeof(rdata));
+ memset(&dev, 0, sizeof(struct hm_dev));
- dev = hmcfgusb_init(parse_hmcfgusb, &rdata);
- if (!dev) {
- fprintf(stderr, "Can't initialize HM-CFG-USB\n");
- exit(EXIT_FAILURE);
- }
+ if (culfw_dev) {
+ printf("Opening culfw-device at path %s with speed %u\n", culfw_dev, bps);
+ dev.culfw = culfw_init(culfw_dev, bps, parse_culfw, &rdata);
+ if (!dev.culfw) {
+ fprintf(stderr, "Can't initialize CUL at %s with rate %u\n", culfw_dev, bps);
+ exit(EXIT_FAILURE);
+ }
+ dev.type = DEVICE_TYPE_CULFW;
- if (dev->bootloader) {
- fprintf(stderr, "\nHM-CFG-USB not in bootloader mode, aborting!\n");
- exit(EXIT_FAILURE);
- }
+ printf("Requesting firmware version\n");
+ culfw_send(dev.culfw, "\r\n", 2);
+ culfw_flush(dev.culfw);
- printf("\nHM-CFG-USB opened\n\n");
+ while (1) {
+ culfw_send(dev.culfw, "V\r\n", 3);
- memset(out, 0, sizeof(out));
- out[0] = 'K';
- hmcfgusb_send(dev, out, sizeof(out), 1);
+ errno = 0;
+ pfd = culfw_poll(dev.culfw, 1000);
+ if ((pfd < 0) && errno) {
+ if (errno != ETIMEDOUT) {
+ perror("\n\nhmcfgusb_poll");
+ exit(EXIT_FAILURE);
+ }
+ }
+ if (rdata.version)
+ break;
+ }
- while (1) {
- errno = 0;
- pfd = hmcfgusb_poll(dev, 1);
- if ((pfd < 0) && errno) {
- if (errno != ETIMEDOUT) {
- perror("\n\nhmcfgusb_poll");
- exit(EXIT_FAILURE);
+ printf("culfw-device firmware version: ");
+ if (rdata.version != 0xffff) {
+ printf("%u.%02u\n",
+ (rdata.version >> 8) & 0xff,
+ rdata.version & 0xff);
+ } else {
+ if (rdata.is_TSCUL) {
+ culfw_send(dev.culfw, "At1\r\n", 5); // tsculfw: try switch on timestamp protocol
+ printf("tsculfw\n");
+ culfw_flush(dev.culfw);
+ culfw_send(dev.culfw, "ApTiMeStAmP\r\n", 13); // tsculfw: send ping to get credits info
+ pfd = culfw_poll(dev.culfw, 1000);
+ if ((pfd < 0) && errno) {
+ if (errno != ETIMEDOUT) {
+ perror("\n\nhmcfgusb_poll");
+ exit(EXIT_FAILURE);
+ }
+ }
+ if (rdata.credits) { // tsculfw: maximum credits available?
+ fprintf(stderr, "\n\ntsculfw does not report full credits, try again later\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if (kNo > 0) {
+ char keybuf[64] = { 0 };
+ int i;
+
+ printf("Setting AES-key\n");
+ snprintf(keybuf, sizeof(keybuf) - 1, "Ak%02x", kNo - 1);
+
+ for (i = 0; i < 16; i++) {
+ keybuf[4 + (i * 2)] = nibble_to_ascii((key[i] >> 4) & 0xf);
+ keybuf[4 + (i * 2) + 1] = nibble_to_ascii(key[i] & 0xf);
+ }
+ keybuf[4 + (i * 2) ] = '\r';
+ keybuf[4 + (i * 2) + 1] = '\n';
+ culfw_send(dev.culfw, keybuf, strlen(keybuf)); // tsculfw: send ping to get credits info
+ pfd = culfw_poll(dev.culfw, 1000);
+ if ((pfd < 0) && errno) {
+ if (errno != ETIMEDOUT) {
+ perror("\n\nhmcfgusb_poll");
+ exit(EXIT_FAILURE);
+ }
+ }
+ }
+ }
+ else {
+ printf("a-culfw\n");
}
}
- if (rdata.hmcfgusb_version)
- break;
+
+ if (rdata.version < 0x013a) {
+ fprintf(stderr, "\nThis version does _not_ support firmware upgrade mode, you need at least 1.58!\n");
+ exit(EXIT_FAILURE);
+ }
+ } else if (uart) {
+ uint32_t new_hmid = my_hmid;
+
+ hmuartlgw_set_debug(debug);
+
+ dev.hmuartlgw = hmuart_init(uart, parse_hmuartlgw, &rdata, 1);
+ if (!dev.hmuartlgw) {
+ fprintf(stderr, "Can't initialize HM-MOD-UART\n");
+ exit(EXIT_FAILURE);
+ }
+ dev.type = DEVICE_TYPE_HMUARTLGW;
+
+ out[0] = HMUARTLGW_APP_GET_HMID;
+ send_wait_hmuartlgw(&dev, &rdata, out, 1, HMUARTLGW_APP, HMUARTLGW_STATE_GET_HMID, HMUARTLGW_STATE_ACK_APP);
+
+ out[0] = HMUARTLGW_OS_GET_FIRMWARE;
+ send_wait_hmuartlgw(&dev, &rdata, out, 1, HMUARTLGW_OS, HMUARTLGW_STATE_GET_FIRMWARE, HMUARTLGW_STATE_DONE);
+
+ out[0] = HMUARTLGW_OS_GET_CREDITS;
+ send_wait_hmuartlgw(&dev, &rdata, out, 1, HMUARTLGW_OS, HMUARTLGW_STATE_GET_CREDITS, HMUARTLGW_STATE_DONE);
+
+ printf("HM-MOD-UART firmware version: %u.%u.%u, used credits: %u%%\n",
+ rdata.uartlgw_version[0],
+ rdata.uartlgw_version[1],
+ rdata.uartlgw_version[2],
+ rdata.credits);
+
+ if (rdata.credits >= 40) {
+ printf("\nRebooting HM-MOD-UART to avoid running out of credits\n");
+
+ hmuartlgw_enter_bootloader(dev.hmuartlgw);
+ hmuartlgw_enter_app(dev.hmuartlgw);
+ }
+
+ printf("\nHM-MOD-UART opened\n\n");
+
+ if (new_hmid && (my_hmid != new_hmid)) {
+ printf("Changing hmid from %06x to %06x\n", my_hmid, new_hmid);
+
+ out[0] = HMUARTLGW_APP_SET_HMID;
+ out[1] = (new_hmid >> 16) & 0xff;
+ out[2] = (new_hmid >> 8) & 0xff;
+ out[3] = new_hmid & 0xff;
+ send_wait_hmuartlgw(&dev, &rdata, out, 4, HMUARTLGW_APP, HMUARTLGW_STATE_WAIT_APP, HMUARTLGW_STATE_ACK_APP);
+
+ my_hmid = new_hmid;
+ }
+
+ if (kNo > 0) {
+ printf("Setting AES-key\n");
+
+ memset(out, 0, sizeof(out));
+ out[0] = HMUARTLGW_APP_SET_CURRENT_KEY;
+ memcpy(&(out[1]), key, 16);
+ out[17] = kNo;
+ send_wait_hmuartlgw(&dev, &rdata, out, 18, HMUARTLGW_APP, HMUARTLGW_STATE_WAIT_APP, HMUARTLGW_STATE_ACK_APP);
+
+ memset(out, 0, sizeof(out));
+ out[0] = HMUARTLGW_APP_SET_OLD_KEY;
+ memcpy(&(out[1]), key, 16);
+ out[17] = kNo;
+ send_wait_hmuartlgw(&dev, &rdata, out, 18, HMUARTLGW_APP, HMUARTLGW_STATE_WAIT_APP, HMUARTLGW_STATE_ACK_APP);
+ }
+ } else {
+ uint32_t new_hmid = my_hmid;
+
+ hmcfgusb_set_debug(debug);
+
+ dev.hmcfgusb = hmcfgusb_init(parse_hmcfgusb, &rdata, hmcfgusb_serial);
+ if (!dev.hmcfgusb) {
+ fprintf(stderr, "Can't initialize HM-CFG-USB\n");
+ exit(EXIT_FAILURE);
+ }
+ dev.type = DEVICE_TYPE_HMCFGUSB;
+
+ memset(out, 0, sizeof(out));
+ out[0] = 'K';
+ hmcfgusb_send(dev.hmcfgusb, out, sizeof(out), 1);
+
+ while (1) {
+ errno = 0;
+ pfd = hmcfgusb_poll(dev.hmcfgusb, 1000);
+ if ((pfd < 0) && errno) {
+ if (errno != ETIMEDOUT) {
+ perror("\n\nhmcfgusb_poll");
+ exit(EXIT_FAILURE);
+ }
+ }
+ if (rdata.version)
+ break;
+ }
+
+ if (rdata.version < 0x3c7) {
+ fprintf(stderr, "HM-CFG-USB firmware too low: %u < 967\n", rdata.version);
+ exit(EXIT_FAILURE);
+ }
+
+ printf("HM-CFG-USB firmware version: %u, used credits: %u%%\n", rdata.version, rdata.credits);
+
+ if (rdata.credits >= 40) {
+ printf("\nRebooting HM-CFG-USB to avoid running out of credits\n\n");
+
+ if (!dev.hmcfgusb->bootloader) {
+ printf("HM-CFG-USB not in bootloader mode, entering bootloader.\n");
+ printf("Waiting for device to reappear...\n");
+
+ do {
+ if (dev.hmcfgusb) {
+ if (!dev.hmcfgusb->bootloader)
+ hmcfgusb_enter_bootloader(dev.hmcfgusb);
+ hmcfgusb_close(dev.hmcfgusb);
+ }
+ sleep(1);
+ } while (((dev.hmcfgusb = hmcfgusb_init(parse_hmcfgusb, &rdata, hmcfgusb_serial)) == NULL) || (!dev.hmcfgusb->bootloader));
+ }
+
+ if (dev.hmcfgusb->bootloader) {
+ printf("HM-CFG-USB in bootloader mode, rebooting\n");
+
+ do {
+ if (dev.hmcfgusb) {
+ if (dev.hmcfgusb->bootloader)
+ hmcfgusb_leave_bootloader(dev.hmcfgusb);
+ hmcfgusb_close(dev.hmcfgusb);
+ }
+ sleep(1);
+ } while (((dev.hmcfgusb = hmcfgusb_init(parse_hmcfgusb, &rdata, hmcfgusb_serial)) == NULL) || (dev.hmcfgusb->bootloader));
+ }
+ }
+
+ printf("\n\nHM-CFG-USB opened\n\n");
+
+ if (new_hmid && (my_hmid != new_hmid)) {
+ printf("Changing hmid from %06x to %06x\n", my_hmid, new_hmid);
+
+ memset(out, 0, sizeof(out));
+ out[0] = 'A';
+ out[1] = (new_hmid >> 16) & 0xff;
+ out[2] = (new_hmid >> 8) & 0xff;
+ out[3] = new_hmid & 0xff;
+
+ hmcfgusb_send(dev.hmcfgusb, out, sizeof(out), 1);
+
+ my_hmid = new_hmid;
+ }
+
+ if (kNo > 0) {
+ printf("Setting AES-key\n");
+
+ memset(out, 0, sizeof(out));
+ out[0] = 'Y';
+ out[1] = 0x01;
+ out[2] = kNo;
+ out[3] = sizeof(key);
+ memcpy(&(out[4]), key, sizeof(key));
+ hmcfgusb_send(dev.hmcfgusb, out, sizeof(out), 1);
+
+ memset(out, 0, sizeof(out));
+ out[0] = 'Y';
+ out[1] = 0x02;
+ out[2] = 0x00;
+ out[3] = 0x00;
+ hmcfgusb_send(dev.hmcfgusb, out, sizeof(out), 1);
+
+ memset(out, 0, sizeof(out));
+ out[0] = 'Y';
+ out[1] = 0x03;
+ out[2] = 0x00;
+ out[3] = 0x00;
+ hmcfgusb_send(dev.hmcfgusb, out, sizeof(out), 1);
+ }
}
- if (rdata.hmcfgusb_version < 0x3c7) {
- fprintf(stderr, "HM-CFG-USB firmware too low: %u < 967\n", rdata.hmcfgusb_version);
+ if (!switch_speed(&dev, &rdata, 10)) {
+ fprintf(stderr, "Can't switch speed!\n");
exit(EXIT_FAILURE);
}
- printf("HM-CFG-USB firmware version: %u\n", rdata.hmcfgusb_version);
+ if (hmid && my_hmid) {
+ switch (dev.type) {
+ case DEVICE_TYPE_HMCFGUSB:
+ printf("Adding HMID\n");
- if (!switch_speed(dev, &rdata, 10)) {
- fprintf(stderr, "Can't switch speed!\n");
- exit(EXIT_FAILURE);
+ memset(out, 0, sizeof(out));
+ out[0] = '+';
+ out[1] = (hmid >> 16) & 0xff;
+ out[2] = (hmid >> 8) & 0xff;
+ out[3] = hmid & 0xff;
+
+ hmcfgusb_send(dev.hmcfgusb, out, sizeof(out), 1);
+ break;
+ case DEVICE_TYPE_HMUARTLGW:
+ printf("Adding HMID\n");
+
+ memset(out, 0, sizeof(out));
+ out[0] = HMUARTLGW_APP_ADD_PEER;
+ out[1] = (hmid >> 16) & 0xff;
+ out[2] = (hmid >> 8) & 0xff;
+ out[3] = hmid & 0xff;
+ out[4] = (kNo > 0) ? kNo : 0x00; /* KeyIndex */
+ out[5] = 0x00; /* WakeUp? */
+ out[6] = 0x00; /* WakeUp? */
+
+ send_wait_hmuartlgw(&dev, &rdata, out, 7, HMUARTLGW_APP, HMUARTLGW_STATE_WAIT_APP, HMUARTLGW_STATE_ACK_APP);
+
+ break;
+ }
+ printf("Sending device with hmid %06x to bootloader\n", hmid);
+ out[CTL] = 0x30;
+ out[TYPE] = 0x11;
+ SET_SRC(out, my_hmid);
+ SET_DST(out, hmid);
+ out[PAYLOAD] = 0xCA;
+ SET_LEN_FROM_PAYLOADLEN(out, 1);
+
+ cnt = 3;
+ do {
+ out[MSGID] = msgid++;
+ if (send_hm_message(&dev, &rdata, out)) {
+ break;
+ }
+ } while (cnt--);
+ if (cnt == -1) {
+ printf("Failed to send device to bootloader, please enter bootloader manually.\n");
+ }
}
- printf("Waiting for device with serial %s\n", argv[2]);
+ if (serial) {
+ printf("Waiting for device with serial %s\n", serial);
+ } else {
+ printf("Waiting for device with HMID %06x\n", hmid);
+ }
while (1) {
errno = 0;
- pfd = hmcfgusb_poll(dev, 1);
+ switch (dev.type) {
+ case DEVICE_TYPE_CULFW:
+ pfd = culfw_poll(dev.culfw, 1000);
+ break;
+ case DEVICE_TYPE_HMCFGUSB:
+ pfd = hmcfgusb_poll(dev.hmcfgusb, 1000);
+ break;
+ case DEVICE_TYPE_HMUARTLGW:
+ pfd = hmuartlgw_poll(dev.hmuartlgw, 1000);
+ break;
+ default:
+ pfd = -1;
+ break;
+ }
+
if ((pfd < 0) && errno) {
if (errno != ETIMEDOUT) {
- perror("\n\nhmcfgusb_poll");
+ perror("\n\npoll");
exit(EXIT_FAILURE);
}
}
(rdata.message[CTL] == 0x00) && /* Control Byte */
(rdata.message[TYPE] == 0x10) && /* Messagte type: Information */
(DST(rdata.message) == 0x000000) && /* Broadcast */
- (rdata.message[PAYLOAD] == 0x00) && /* FUP? */
- (rdata.message[PAYLOAD+2] == 'E') &&
- (rdata.message[PAYLOAD+3] == 'Q')) {
- if (!strncmp((char*)&(rdata.message[0x0b]), argv[2], 10)) {
+ (rdata.message[PAYLOAD] == 0x00)) { /* FUP? */
+ if (serial && !strncmp((char*)&(rdata.message[0x0b]), serial, 10)) {
hmid = SRC(rdata.message);
break;
+ } else if (!serial && SRC(rdata.message) == hmid) {
+ serial = (char*)&(rdata.message[0x0b]);
+ break;
}
}
}
- printf("Device with serial %s (hmid: %06x) entered firmware-update-mode\n", argv[2], hmid);
+ printf("Device with serial %s (HMID: %06x) entered firmware-update-mode\n", serial, hmid);
- printf("Adding HMID\n");
+ switch (dev.type) {
+ case DEVICE_TYPE_HMCFGUSB:
+ printf("Adding HMID\n");
- memset(out, 0, sizeof(out));
- out[0] = '+';
- out[1] = (hmid >> 16) & 0xff;
- out[2] = (hmid >> 8) & 0xff;
- out[3] = hmid & 0xff;
+ memset(out, 0, sizeof(out));
+ out[0] = '+';
+ out[1] = (hmid >> 16) & 0xff;
+ out[2] = (hmid >> 8) & 0xff;
+ out[3] = hmid & 0xff;
+
+ hmcfgusb_send(dev.hmcfgusb, out, sizeof(out), 1);
+ break;
+ case DEVICE_TYPE_HMUARTLGW:
+ printf("Adding HMID\n");
- hmcfgusb_send(dev, out, sizeof(out), 1);
+ memset(out, 0, sizeof(out));
+ out[0] = HMUARTLGW_APP_ADD_PEER;
+ out[1] = (hmid >> 16) & 0xff;
+ out[2] = (hmid >> 8) & 0xff;
+ out[3] = hmid & 0xff;
+ out[4] = 0x00; /* KeyIndex */
+ out[5] = 0x00; /* WakeUp? */
+ out[6] = 0x00; /* WakeUp? */
+
+ send_wait_hmuartlgw(&dev, &rdata, out, 7, HMUARTLGW_APP, HMUARTLGW_STATE_WAIT_APP, HMUARTLGW_STATE_ACK_APP);
+
+ break;
+ }
switchcnt = 3;
do {
SET_SRC(out, my_hmid);
SET_DST(out, hmid);
- memcpy(&out[PAYLOAD], switch_msg, sizeof(switch_msg));
- SET_LEN_FROM_PAYLOADLEN(out, sizeof(switch_msg));
+ memcpy(&out[PAYLOAD], cc1101_regs, sizeof(cc1101_regs));
+ SET_LEN_FROM_PAYLOADLEN(out, sizeof(cc1101_regs));
- if (!send_hm_message(dev, &rdata, out)) {
+ if (!send_hm_message(&dev, &rdata, out)) {
exit(EXIT_FAILURE);
}
- if (!switch_speed(dev, &rdata, 100)) {
+ if (!switch_speed(&dev, &rdata, 100)) {
fprintf(stderr, "Can't switch speed!\n");
exit(EXIT_FAILURE);
}
SET_SRC(out, my_hmid);
SET_DST(out, hmid);
- memcpy(&out[PAYLOAD], switch_msg, sizeof(switch_msg));
- SET_LEN_FROM_PAYLOADLEN(out, sizeof(switch_msg));
+ memcpy(&out[PAYLOAD], cc1101_regs, sizeof(cc1101_regs));
+ SET_LEN_FROM_PAYLOADLEN(out, sizeof(cc1101_regs));
cnt = 3;
do {
- if (send_hm_message(dev, &rdata, out)) {
+ if (send_hm_message(&dev, &rdata, out)) {
/* A0A02000221B9AD00000000 */
switched = 1;
break;
-
}
} while (cnt--);
if (!switched) {
printf("No!\n");
- if (!switch_speed(dev, &rdata, 10)) {
+ if (!switch_speed(&dev, &rdata, 10)) {
fprintf(stderr, "Can't switch speed!\n");
exit(EXIT_FAILURE);
}
first = 1;
cnt = 0;
do {
- int payloadlen = 35;
+ int payloadlen = max_payloadlen - 2;
int ack = 0;
if (first) {
- payloadlen = 37;
+ payloadlen = max_payloadlen;
first = 0;
}
if (((pos + payloadlen) - &(fw->fw[block][2])) == len)
ack = 1;
- memset(&rdata, 0, sizeof(rdata));
+ memset(rdata.message, 0, sizeof(rdata.message));
+ rdata.message_type = 0;
memset(out, 0, sizeof(out));
memcpy(&out[PAYLOAD], pos, payloadlen);
SET_LEN_FROM_PAYLOADLEN(out, payloadlen);
- if (send_hm_message(dev, &rdata, out)) {
+ if (send_hm_message(&dev, &rdata, out)) {
pos += payloadlen;
} else {
pos = &(fw->fw[block][2]);
cnt++;
- if (cnt == 3) {
+ if (cnt == MAX_RETRIES) {
fprintf(stderr, "\nToo many errors, giving up!\n");
exit(EXIT_FAILURE);
} else {
printf("\n");
- if (!switch_speed(dev, &rdata, 10)) {
+ if (!switch_speed(&dev, &rdata, 10)) {
fprintf(stderr, "Can't switch speed!\n");
exit(EXIT_FAILURE);
}
printf("Waiting for device to reboot\n");
+ rdata.message_type = MESSAGE_TYPE_R;
cnt = 10;
+ if (dev.type == DEVICE_TYPE_HMUARTLGW)
+ cnt = 200; /* FIXME */
do {
errno = 0;
- pfd = hmcfgusb_poll(dev, 1);
+ switch(dev.type) {
+ case DEVICE_TYPE_CULFW:
+ pfd = culfw_poll(dev.culfw, 1000);
+ break;
+ case DEVICE_TYPE_HMCFGUSB:
+ pfd = hmcfgusb_poll(dev.hmcfgusb, 1000);
+ break;
+ case DEVICE_TYPE_HMUARTLGW:
+ pfd = hmuartlgw_poll(dev.hmuartlgw, 1000);
+ break;
+ default:
+ pfd = -1;
+ break;
+ }
if ((pfd < 0) && errno) {
if (errno != ETIMEDOUT) {
- perror("\n\nhmcfgusb_poll");
+ perror("\n\npoll");
exit(EXIT_FAILURE);
}
}
printf("Device rebooted\n");
}
- hmcfgusb_close(dev);
+ switch(dev.type) {
+ case DEVICE_TYPE_HMCFGUSB:
+ hmcfgusb_close(dev.hmcfgusb);
+ hmcfgusb_exit();
+ break;
+ case DEVICE_TYPE_CULFW:
+ culfw_close(dev.culfw);
+ break;
+ }
return EXIT_SUCCESS;
}
projects / hmcfgusb / blobdiff