#include "hm.h"
#include "version.h"
#include "hmcfgusb.h"
+#include "culfw.h"
+#include "util.h"
+
+#define MAX_RETRIES 5
+
+extern char *optarg;
uint32_t hmid = 0;
+uint32_t my_hmid = 0;
+
+enum device_type {
+ DEVICE_TYPE_HMCFGUSB,
+ DEVICE_TYPE_CULFW,
+};
+
+struct ota_dev {
+ int type;
+ struct hmcfgusb_dev *hmcfgusb;
+ struct culfw_dev *culfw;
+};
enum message_type {
- MESSAGE_TYPE_E,
- MESSAGE_TYPE_R,
+ MESSAGE_TYPE_E = 1,
+ MESSAGE_TYPE_R = 2,
};
struct recv_data {
enum message_type message_type;
uint16_t status;
int speed;
+ uint16_t version;
};
static int parse_hmcfgusb(uint8_t *buf, int buf_len, void *data)
case 'G':
rdata->speed = buf[1];
break;
+ case 'H':
+ rdata->version = (buf[11] << 8) | buf[12];
+ my_hmid = (buf[0x1b] << 16) | (buf[0x1c] << 8) | buf[0x1d];
+ break;
default:
break;
}
return 1;
}
-int send_hm_message(struct hmcfgusb_dev *dev, struct recv_data *rdata, uint8_t *msg)
+static int parse_culfw(uint8_t *buf, int buf_len, void *data)
+{
+ struct recv_data *rdata = data;
+ int pos = 0;
+
+ memset(rdata, 0, sizeof(struct recv_data));
+
+ if (buf_len <= 3)
+ return 0;
+
+ switch(buf[0]) {
+ case 'A':
+ if (buf[1] == 's')
+ return 0;
+
+ while(validate_nibble(buf[(pos * 2) + 1]) &&
+ validate_nibble(buf[(pos * 2) + 2]) &&
+ (pos + 1 < buf_len)) {
+ rdata->message[pos] = ascii_to_nibble(buf[(pos * 2) + 1]) << 4;
+ rdata->message[pos] |= ascii_to_nibble(buf[(pos * 2) + 2]);
+ pos++;
+ }
+
+ if (hmid && (SRC(rdata->message) != hmid))
+ return 0;
+
+ rdata->message_type = MESSAGE_TYPE_E;
+ break;
+ case 'V':
+ {
+ uint8_t v;
+ char *s;
+ char *e;
+
+ s = ((char*)buf) + 2;
+ e = strchr(s, '.');
+ if (!e) {
+ fprintf(stderr, "Unknown response from CUL: %s", buf);
+ return 0;
+ }
+ *e = '\0';
+ v = atoi(s);
+ rdata->version = v << 8;
+
+ s = e + 1;
+ e = strchr(s, ' ');
+ if (!e) {
+ fprintf(stderr, "Unknown response from CUL: %s", buf);
+ return 0;
+ }
+ *e = '\0';
+ v = atoi(s);
+ rdata->version |= v;
+ }
+ break;
+ default:
+ fprintf(stderr, "Unknown response from CUL: %s", buf);
+ return 0;
+ break;
+ }
+
+ return 1;
+}
+
+int send_hm_message(struct ota_dev *dev, struct recv_data *rdata, uint8_t *msg)
{
static uint32_t id = 1;
struct timeval tv;
uint8_t out[0x40];
int pfd;
- if (gettimeofday(&tv, NULL) == -1) {
- perror("gettimeofay");
- return 0;
- }
+ switch(dev->type) {
+ case DEVICE_TYPE_HMCFGUSB:
+ if (gettimeofday(&tv, NULL) == -1) {
+ perror("gettimeofay");
+ return 0;
+ }
- memset(out, 0, sizeof(out));
+ memset(out, 0, sizeof(out));
- out[0] = 'S';
- out[1] = (id >> 24) & 0xff;
- out[2] = (id >> 16) & 0xff;
- out[3] = (id >> 8) & 0xff;
- out[4] = id & 0xff;
- out[10] = 0x01;
- out[11] = (tv.tv_usec >> 24) & 0xff;
- out[12] = (tv.tv_usec >> 16) & 0xff;
- out[13] = (tv.tv_usec >> 8) & 0xff;
- out[14] = tv.tv_usec & 0xff;
-
+ out[0] = 'S';
+ out[1] = (id >> 24) & 0xff;
+ out[2] = (id >> 16) & 0xff;
+ out[3] = (id >> 8) & 0xff;
+ out[4] = id & 0xff;
+ out[10] = 0x01;
+ out[11] = (tv.tv_usec >> 24) & 0xff;
+ out[12] = (tv.tv_usec >> 16) & 0xff;
+ out[13] = (tv.tv_usec >> 8) & 0xff;
+ out[14] = tv.tv_usec & 0xff;
- memcpy(&out[0x0f], msg, msg[0] + 1);
+ memcpy(&out[0x0f], msg, msg[0] + 1);
- memset(rdata, 0, sizeof(struct recv_data));
- hmcfgusb_send(dev, out, sizeof(out), 2);
+ memset(rdata, 0, sizeof(struct recv_data));
+ hmcfgusb_send(dev->hmcfgusb, out, sizeof(out), 1);
- while (1) {
- if (rdata->message_type == MESSAGE_TYPE_R) {
- if (((rdata->status & 0xff) == 0x01) ||
- ((rdata->status & 0xff) == 0x02)) {
- break;
- } else {
- fprintf(stderr, "\n\nInvalid status: %04x\n\n", rdata->status);
- return 0;
+ while (1) {
+ if (rdata->message_type == MESSAGE_TYPE_R) {
+ if (((rdata->status & 0xff) == 0x01) ||
+ ((rdata->status & 0xff) == 0x02)) {
+ break;
+ } else {
+ if ((rdata->status & 0xff00) == 0x0400) {
+ fprintf(stderr, "\nOut of credits!\n");
+ } else if ((rdata->status & 0xff) == 0x08) {
+ fprintf(stderr, "\nMissing ACK!\n");
+ } else {
+ fprintf(stderr, "\nInvalid status: %04x\n", rdata->status);
+ }
+ return 0;
+ }
+ }
+ errno = 0;
+ pfd = hmcfgusb_poll(dev->hmcfgusb, 1000);
+ if ((pfd < 0) && errno) {
+ if (errno != ETIMEDOUT) {
+ perror("\n\nhmcfgusb_poll");
+ exit(EXIT_FAILURE);
+ }
+ }
}
- }
- errno = 0;
- pfd = hmcfgusb_poll(dev, 1);
- if ((pfd < 0) && errno) {
- if (errno != ETIMEDOUT) {
- perror("\n\nhmcfgusb_poll");
- exit(EXIT_FAILURE);
+ break;
+ case DEVICE_TYPE_CULFW:
+ {
+ char buf[256];
+ int i;
+
+ memset(buf, 0, sizeof(buf));
+ buf[0] = 'A';
+ buf[1] = 's';
+ for (i = 0; i < msg[0] + 1; i++) {
+ buf[2 + (i * 2)] = nibble_to_ascii((msg[i] >> 4) & 0xf);
+ buf[2 + (i * 2) + 1] = nibble_to_ascii(msg[i] & 0xf);
+ }
+ buf[2 + (i * 2) ] = '\r';
+ buf[2 + (i * 2) + 1] = '\n';
+
+ memset(rdata, 0, sizeof(struct recv_data));
+ if (culfw_send(dev->culfw, buf, 2 + (i * 2) + 1) == 0) {
+ fprintf(stderr, "culfw_send failed!\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if (msg[CTL] & 0x20) {
+ int cnt = 3;
+ int pfd;
+ do {
+ errno = 0;
+ pfd = culfw_poll(dev->culfw, 200);
+ if ((pfd < 0) && errno) {
+ if (errno != ETIMEDOUT) {
+ perror("\n\nculfw_poll");
+ exit(EXIT_FAILURE);
+ }
+ }
+ if (rdata->message_type == MESSAGE_TYPE_E) {
+ break;
+ }
+ } while(cnt--);
+
+ if (cnt == -1) {
+ fprintf(stderr, "\nMissing ACK!\n");
+ return 0;
+ }
+ }
}
- }
+ break;
}
id++;
return 1;
}
+static int switch_speed(struct ota_dev *dev, struct recv_data *rdata, uint8_t speed)
+{
+ uint8_t out[0x40];
+ int pfd;
+
+ printf("Entering %uk-mode\n", speed);
+
+ switch(dev->type) {
+ case DEVICE_TYPE_HMCFGUSB:
+ memset(out, 0, sizeof(out));
+ out[0] = 'G';
+ out[1] = speed;
+
+ hmcfgusb_send(dev->hmcfgusb, out, sizeof(out), 1);
+
+ while (1) {
+ errno = 0;
+ pfd = hmcfgusb_poll(dev->hmcfgusb, 1000);
+ if ((pfd < 0) && errno) {
+ if (errno != ETIMEDOUT) {
+ perror("\n\nhmcfgusb_poll");
+ exit(EXIT_FAILURE);
+ }
+ }
+ if (rdata->speed == speed)
+ break;
+ }
+ break;
+ case DEVICE_TYPE_CULFW:
+ if (speed == 100) {
+ return culfw_send(dev->culfw, "AR\r\n", 4);
+ } else {
+ return culfw_send(dev->culfw, "Ar\r\n", 4);
+ }
+ break;
+ }
+
+ return 1;
+}
+
+void flash_ota_syntax(char *prog)
+{
+ fprintf(stderr, "Syntax: %s parameters options\n\n", prog);
+ fprintf(stderr, "Mandatory parameters:\n");
+ fprintf(stderr, "\t-f firmware.eq3\tfirmware file to flash\n");
+ fprintf(stderr, "\t-s SERIAL\tserial of device to flash\n");
+ fprintf(stderr, "\nPossible options:\n");
+ fprintf(stderr, "\t-c device\tenable CUL-mode with CUL at path \"device\"\n");
+ fprintf(stderr, "\t-b bps\t\tuse CUL with speed \"bps\" (default: %u)\n", DEFAULT_CUL_BPS);
+ fprintf(stderr, "\t-h\t\tthis help\n");
+}
+
int main(int argc, char **argv)
{
const char twiddlie[] = { '-', '\\', '|', '/' };
- const uint8_t switch_msg[] = { 0x10, 0x5B, 0x11, 0xF8, 0x15, 0x47 };
- struct hmcfgusb_dev *dev;
+ const uint8_t cc1101_regs[] = { 0x10, 0x5B, 0x11, 0xF8, 0x15, 0x47 };
+ char *fw_file = NULL;
+ char *serial = NULL;
+ char *culfw_dev = NULL;
+ unsigned int bps = DEFAULT_CUL_BPS;
+ struct ota_dev dev;
struct recv_data rdata;
uint8_t out[0x40];
uint8_t *pos;
int pfd;
int debug = 0;
int cnt;
+ int switchcnt = 0;
int msgnum = 0;
int switched = 0;
+ int opt;
printf("HomeMatic OTA flasher version " VERSION "\n\n");
- if (argc != 3) {
- if (argc == 1)
- fprintf(stderr, "Missing firmware filename!\n\n");
+ while((opt = getopt(argc, argv, "b:c:f:hs:")) != -1) {
+ switch (opt) {
+ case 'b':
+ bps = atoi(optarg);
+ break;
+ case 'c':
+ culfw_dev = optarg;
+ break;
+ case 'f':
+ fw_file = optarg;
+ break;
+ case 's':
+ serial = optarg;
+ break;
+ case 'h':
+ case ':':
+ case '?':
+ default:
+ flash_ota_syntax(argv[0]);
+ exit(EXIT_FAILURE);
+ break;
- if (argc == 2)
- fprintf(stderr, "Missing serial!\n\n");
+ }
+ }
- fprintf(stderr, "Syntax: %s firmware.eq3 SERIALNUMBER\n\n", argv[0]);
+ if (!fw_file || !serial) {
+ flash_ota_syntax(argv[0]);
exit(EXIT_FAILURE);
}
- fw = firmware_read_firmware(argv[1], debug);
+ fw = firmware_read_firmware(fw_file, debug);
if (!fw)
exit(EXIT_FAILURE);
- hmcfgusb_set_debug(debug);
-
memset(&rdata, 0, sizeof(rdata));
+ memset(&dev, 0, sizeof(struct ota_dev));
- dev = hmcfgusb_init(parse_hmcfgusb, &rdata);
- if (!dev) {
- fprintf(stderr, "Can't initialize HM-CFG-USB\n");
- exit(EXIT_FAILURE);
- }
+ if (culfw_dev) {
+ printf("Opening culfw-device at path %s with speed %u\n", culfw_dev, bps);
+ dev.culfw = culfw_init(culfw_dev, bps, parse_culfw, &rdata);
+ if (!dev.culfw) {
+ fprintf(stderr, "Can't initialize CUL at %s with rate %u\n", culfw_dev, bps);
+ exit(EXIT_FAILURE);
+ }
+ dev.type = DEVICE_TYPE_CULFW;
- if (dev->bootloader) {
- fprintf(stderr, "\nHM-CFG-USB not in bootloader mode, aborting!\n");
- exit(EXIT_FAILURE);
- }
+ printf("Requesting firmware-version\n");
+ culfw_send(dev.culfw, "\r\n", 2);
+ culfw_flush(dev.culfw);
- printf("\nHM-CFG-USB opened\n\n");
+ while (1) {
+ culfw_send(dev.culfw, "V\r\n", 3);
- printf("Entering 10k-mode\n");
+ errno = 0;
+ pfd = culfw_poll(dev.culfw, 1000);
+ if ((pfd < 0) && errno) {
+ if (errno != ETIMEDOUT) {
+ perror("\n\nhmcfgusb_poll");
+ exit(EXIT_FAILURE);
+ }
+ }
+ if (rdata.version)
+ break;
+ }
- memset(out, 0, sizeof(out));
- out[0] = 'G';
- out[1] = 10;
- hmcfgusb_send(dev, out, sizeof(out), 1);
+ printf("culfw-device firmware version: %u.%02u\n",
+ (rdata.version >> 8) & 0xff,
+ rdata.version & 0xff);
- while (1) {
- errno = 0;
- pfd = hmcfgusb_poll(dev, 1);
- if ((pfd < 0) && errno) {
- if (errno != ETIMEDOUT) {
- perror("\n\nhmcfgusb_poll");
- exit(EXIT_FAILURE);
+ if (rdata.version < 0x013a) {
+ fprintf(stderr, "\nThis version does _not_ support firmware upgrade mode, you need at least 1.58!\n");
+ exit(EXIT_FAILURE);
+ }
+ } else {
+ hmcfgusb_set_debug(debug);
+
+ dev.hmcfgusb = hmcfgusb_init(parse_hmcfgusb, &rdata);
+ if (!dev.hmcfgusb) {
+ fprintf(stderr, "Can't initialize HM-CFG-USB\n");
+ exit(EXIT_FAILURE);
+ }
+ dev.type = DEVICE_TYPE_HMCFGUSB;
+
+ printf("\nRebooting HM-CFG-USB to avoid running out of credits\n\n");
+
+ if (!dev.hmcfgusb->bootloader) {
+ printf("HM-CFG-USB not in bootloader mode, entering bootloader.\n");
+ printf("Waiting for device to reappear...\n");
+
+ do {
+ if (dev.hmcfgusb) {
+ if (!dev.hmcfgusb->bootloader)
+ hmcfgusb_enter_bootloader(dev.hmcfgusb);
+ hmcfgusb_close(dev.hmcfgusb);
+ }
+ sleep(1);
+ } while (((dev.hmcfgusb = hmcfgusb_init(parse_hmcfgusb, &rdata)) == NULL) || (!dev.hmcfgusb->bootloader));
+ }
+
+ if (dev.hmcfgusb->bootloader) {
+ printf("HM-CFG-USB in bootloader mode, rebooting\n");
+
+ do {
+ if (dev.hmcfgusb) {
+ if (dev.hmcfgusb->bootloader)
+ hmcfgusb_leave_bootloader(dev.hmcfgusb);
+ hmcfgusb_close(dev.hmcfgusb);
+ }
+ sleep(1);
+ } while (((dev.hmcfgusb = hmcfgusb_init(parse_hmcfgusb, &rdata)) == NULL) || (dev.hmcfgusb->bootloader));
+ }
+
+ printf("\n\nHM-CFG-USB opened\n\n");
+
+ memset(out, 0, sizeof(out));
+ out[0] = 'K';
+ hmcfgusb_send(dev.hmcfgusb, out, sizeof(out), 1);
+
+ while (1) {
+ errno = 0;
+ pfd = hmcfgusb_poll(dev.hmcfgusb, 1000);
+ if ((pfd < 0) && errno) {
+ if (errno != ETIMEDOUT) {
+ perror("\n\nhmcfgusb_poll");
+ exit(EXIT_FAILURE);
+ }
}
+ if (rdata.version)
+ break;
}
- if (rdata.speed == 10)
- break;
+
+ if (rdata.version < 0x3c7) {
+ fprintf(stderr, "HM-CFG-USB firmware too low: %u < 967\n", rdata.version);
+ exit(EXIT_FAILURE);
+ }
+
+ printf("HM-CFG-USB firmware version: %u\n", rdata.version);
+ }
+
+ if (!switch_speed(&dev, &rdata, 10)) {
+ fprintf(stderr, "Can't switch speed!\n");
+ exit(EXIT_FAILURE);
}
- printf("Waiting for device with serial %s\n", argv[2]);
+ printf("Waiting for device with serial %s\n", serial);
while (1) {
errno = 0;
- pfd = hmcfgusb_poll(dev, 1);
+ switch (dev.type) {
+ case DEVICE_TYPE_CULFW:
+ pfd = culfw_poll(dev.culfw, 1000);
+ break;
+ case DEVICE_TYPE_HMCFGUSB:
+ default:
+ pfd = hmcfgusb_poll(dev.hmcfgusb, 1000);
+ break;
+ }
+
if ((pfd < 0) && errno) {
if (errno != ETIMEDOUT) {
- perror("\n\nhmcfgusb_poll");
+ perror("\n\npoll");
exit(EXIT_FAILURE);
}
}
(rdata.message[CTL] == 0x00) && /* Control Byte */
(rdata.message[TYPE] == 0x10) && /* Messagte type: Information */
(DST(rdata.message) == 0x000000) && /* Broadcast */
- (rdata.message[PAYLOAD] == 0x00) && /* FUP? */
- (rdata.message[PAYLOAD+2] == 'E') &&
- (rdata.message[PAYLOAD+3] == 'Q')) {
- if (!strncmp((char*)&(rdata.message[0x0b]), argv[2], 10)) {
+ (rdata.message[PAYLOAD] == 0x00)) { /* FUP? */
+ if (!strncmp((char*)&(rdata.message[0x0b]), serial, 10)) {
hmid = SRC(rdata.message);
break;
}
}
}
- printf("Device with serial %s (hmid: %06x) entered firmware-update-mode\n", argv[2], hmid);
+ printf("Device with serial %s (hmid: %06x) entered firmware-update-mode\n", serial, hmid);
- printf("Adding HMID\n");
+ if (dev.type == DEVICE_TYPE_HMCFGUSB) {
+ printf("Adding HMID\n");
- memset(out, 0, sizeof(out));
- out[0] = '+';
- out[1] = (hmid >> 16) & 0xff;
- out[2] = (hmid >> 8) & 0xff;
- out[3] = hmid & 0xff;
+ memset(out, 0, sizeof(out));
+ out[0] = '+';
+ out[1] = (hmid >> 16) & 0xff;
+ out[2] = (hmid >> 8) & 0xff;
+ out[3] = hmid & 0xff;
- hmcfgusb_send(dev, out, sizeof(out), 2);
+ hmcfgusb_send(dev.hmcfgusb, out, sizeof(out), 1);
+ }
+ switchcnt = 3;
do {
printf("Initiating remote switch to 100k\n");
out[MSGID] = msgid++;
out[CTL] = 0x00;
out[TYPE] = 0xCB;
- SET_SRC(out, 0x000000);
+ SET_SRC(out, my_hmid);
SET_DST(out, hmid);
- memcpy(&out[PAYLOAD], switch_msg, sizeof(switch_msg));
- SET_LEN_FROM_PAYLOADLEN(out, sizeof(switch_msg));
+ memcpy(&out[PAYLOAD], cc1101_regs, sizeof(cc1101_regs));
+ SET_LEN_FROM_PAYLOADLEN(out, sizeof(cc1101_regs));
- if (!send_hm_message(dev, &rdata, out)) {
+ if (!send_hm_message(&dev, &rdata, out)) {
exit(EXIT_FAILURE);
}
- printf("Entering 100k-mode\n");
-
- memset(out, 0, sizeof(out));
- out[0] = 'G';
- out[1] = 100;
-
- hmcfgusb_send(dev, out, sizeof(out), 2);
-
- while (1) {
- errno = 0;
- pfd = hmcfgusb_poll(dev, 1);
- if ((pfd < 0) && errno) {
- if (errno != ETIMEDOUT) {
- perror("\n\nhmcfgusb_poll");
- exit(EXIT_FAILURE);
- }
- }
- if (rdata.speed == 100)
- break;
+ if (!switch_speed(&dev, &rdata, 100)) {
+ fprintf(stderr, "Can't switch speed!\n");
+ exit(EXIT_FAILURE);
}
printf("Has the device switched?\n");
out[MSGID] = msgid++;
out[CTL] = 0x20;
out[TYPE] = 0xCB;
- SET_SRC(out, 0x000000);
+ SET_SRC(out, my_hmid);
SET_DST(out, hmid);
- memcpy(&out[PAYLOAD], switch_msg, sizeof(switch_msg));
- SET_LEN_FROM_PAYLOADLEN(out, sizeof(switch_msg));
+ memcpy(&out[PAYLOAD], cc1101_regs, sizeof(cc1101_regs));
+ SET_LEN_FROM_PAYLOADLEN(out, sizeof(cc1101_regs));
cnt = 3;
do {
- if (send_hm_message(dev, &rdata, out)) {
+ if (send_hm_message(&dev, &rdata, out)) {
/* A0A02000221B9AD00000000 */
switched = 1;
break;
-
}
} while (cnt--);
if (!switched) {
- printf("Entering 10k-mode\n");
-
- memset(out, 0, sizeof(out));
- out[0] = 'G';
- out[1] = 10;
- hmcfgusb_send(dev, out, sizeof(out), 1);
+ printf("No!\n");
- while (1) {
- errno = 0;
- pfd = hmcfgusb_poll(dev, 1);
- if ((pfd < 0) && errno) {
- if (errno != ETIMEDOUT) {
- perror("\n\nhmcfgusb_poll");
- exit(EXIT_FAILURE);
- }
- }
- if (rdata.speed == 10)
- break;
+ if (!switch_speed(&dev, &rdata, 10)) {
+ fprintf(stderr, "Can't switch speed!\n");
+ exit(EXIT_FAILURE);
}
}
- } while (!switched);
+ } while ((!switched) && (switchcnt--));
+ if (!switched) {
+ fprintf(stderr, "Too many errors, giving up!\n");
+ exit(EXIT_FAILURE);
+ }
- printf("Initiating firmware upload!\n");
+ printf("Yes!\n");
printf("Flashing %d blocks", fw->fw_blocks);
if (debug) {
memset(out, 0, sizeof(out));
- out[MSGID] = msgid++;
+ out[MSGID] = msgid;
if (ack)
out[CTL] = 0x20;
out[TYPE] = 0xCA;
- SET_SRC(out, 0x000000);
+ SET_SRC(out, my_hmid);
SET_DST(out, hmid);
memcpy(&out[PAYLOAD], pos, payloadlen);
SET_LEN_FROM_PAYLOADLEN(out, payloadlen);
- if (send_hm_message(dev, &rdata, out)) {
+ if (send_hm_message(&dev, &rdata, out)) {
pos += payloadlen;
} else {
pos = &(fw->fw[block][2]);
cnt++;
- if (cnt == 3) {
+ if (cnt == MAX_RETRIES) {
fprintf(stderr, "\nToo many errors, giving up!\n");
exit(EXIT_FAILURE);
} else {
fflush(stdout);
}
} while((pos - &(fw->fw[block][2])) < len);
+ msgid++;
}
firmware_free(fw);
- printf("\nEntering 10k-mode\n");
+ printf("\n");
- memset(out, 0, sizeof(out));
- out[0] = 'G';
- out[1] = 10;
- hmcfgusb_send(dev, out, sizeof(out), 1);
-
- while (1) {
- errno = 0;
- pfd = hmcfgusb_poll(dev, 1);
- if ((pfd < 0) && errno) {
- if (errno != ETIMEDOUT) {
- perror("\n\nhmcfgusb_poll");
- exit(EXIT_FAILURE);
- }
- }
- if (rdata.speed == 10)
- break;
+ if (!switch_speed(&dev, &rdata, 10)) {
+ fprintf(stderr, "Can't switch speed!\n");
+ exit(EXIT_FAILURE);
}
printf("Waiting for device to reboot\n");
cnt = 10;
do {
errno = 0;
- pfd = hmcfgusb_poll(dev, 1);
+ switch(dev.type) {
+ case DEVICE_TYPE_CULFW:
+ pfd = culfw_poll(dev.culfw, 1000);
+ break;
+ case DEVICE_TYPE_HMCFGUSB:
+ default:
+ pfd = hmcfgusb_poll(dev.hmcfgusb, 1000);
+ break;
+ }
if ((pfd < 0) && errno) {
if (errno != ETIMEDOUT) {
- perror("\n\nhmcfgusb_poll");
+ perror("\n\npoll");
exit(EXIT_FAILURE);
}
}
printf("Device rebooted\n");
}
- hmcfgusb_close(dev);
+ switch(dev.type) {
+ case DEVICE_TYPE_HMCFGUSB:
+ hmcfgusb_close(dev.hmcfgusb);
+ hmcfgusb_exit();
+ break;
+ case DEVICE_TYPE_CULFW:
+ culfw_close(dev.culfw);
+ break;
+ }
return EXIT_SUCCESS;
}
projects / hmcfgusb / blobdiff