X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/hmcfgusb/blobdiff_plain/d08bf87d558b6b3956f103823f488c552d24053d..f276a46cb9b1387aed1542882f6341c1510c955f:/README.md?ds=sidebyside

diff --git a/README.md b/README.md
index 37744b9..3726b6c 100644
--- a/README.md
+++ b/README.md
@@ -1,5 +1,6 @@
 This repository contains utilities to use the [HM-CFG-USB(2)][] (HomeMatic USB
-Konfigurations-Adapter) from [ELV][] on Linux/Unix by using [libusb 1.0][].
+Konfigurations-Adapter, seems to be discontinued) from [ELV][] on Linux/Unix
+by using [libusb 1.0][].
 
 The HM-CFG-USB can be used to send and receive [BidCoS-Packets][] to control
 [HomeMatic][] home automation devices (like remote controllable sockets,
@@ -11,7 +12,7 @@ HM-CFG-USB in [Fhem][] or as a lan configuration tool for the [CCU][] or the
 HomeMatic windows configuration software, also supporting devices using
 AES-signing like [KeyMatic][].
 
-[HM-CFG-USB(2)]: http://www.elv.de/homematic-usb-konfigurations-adapter-1.html
+[HM-CFG-USB(2)]: http://www.eq-3.de/Downloads/eq3/downloads_produktkatalog/homematic/bda/HM-CFG-USB-2_-UM-eQ-3-150129-web.pdf
 [ELV]: http://www.elv.de/
 [libusb 1.0]: http://www.libusb.org/
 [BidCoS-Packets]: http://homegear.eu/index.php/BidCoS%C2%AE_Packets
@@ -31,7 +32,7 @@ AES-signing like [KeyMatic][].
         2.  Extract the archive: `tar xzf hmcfgusb-0.100.tar.gz`
         3.  Change into the new directory: `cd hmcfgusb-0.100`
     *   Get the current *development*-version via git (can be easily updated with `git pull`):
-        1.  `git clone git://git.zerfleddert.de/hmcfgusb`
+        1.  `git clone https://git.zerfleddert.de/git/hmcfgusb`
         2.  Change into the new directory: `cd hmcfgusb`
     *   Get the current *development*-version as an archive:
         1.  [hmcfgusb-HEAD-xxxxxxx.tar.gz][] (xxxxxxx is part of the commit-id.
@@ -48,7 +49,7 @@ AES-signing like [KeyMatic][].
     ``define hmusb HMLAN 127.0.0.1:1234``  
     ``attr hmusb hmId <hmId>``
 
-**Important compatibility information:**
+**Important compatibility information:**  
 If older Fhem-versions (before 2015-06-19) or [Homegear][] before 2015-07-01
 is used to connect to hmland, the `-I` switch might be needed to
 impersonate a LAN-interface (this replaces the identity string HM-USB-IF with
@@ -60,7 +61,7 @@ hmland without this switch. It was the hardcoded default in versions
 This incompatibility is needed so connecting software is able to
 differentiate between HM-CFG-LAN and HM-CFG-USB.
 
-**Important security information:**
+**Important security information:**  
 Versions before 0.101 do not correctly transmit the AES channel-mask
 to the HM-CFG-USB, which results in signature-requests not being generated
 by the device in most cases. This can lead to processing of unsigned messages
@@ -86,7 +87,7 @@ you should upgrade to at least version 0.101.
 [hmusbif.03c7.enc]: https://git.zerfleddert.de/hmcfgusb/firmware/hmusbif.03c7.enc
 [Firmware update tool]: http://www.eq-3.de/Downloads/Software/Firmware%20Update%20Tool/HM-CFG-USB-2_FW-UpdateTool-Usersoftware_V1_1_eQ-3_140619.zip
 
-### Updating HomemMatic devices over the air (OTA) (also for CUL devices): ###
+### Updating HomemMatic devices over the air (OTA) (also for CUL- and HM-MOD-UART-devices): ###
 
 1.  Compile the hmcfgusb utilities like in the hmland HowTo above
     (steps 1 to 5) and stay in the directory
@@ -97,11 +98,32 @@ you should upgrade to at least version 0.101.
 *   When using the **[HM-CFG-USB(2)][]**, flash the new firmware to the device
     with serial *KEQ0123456*:  
      `./flash-ota -f hm_cc_rt_dn_update_V1_4_001_141020.eq3 -s KEQ0123456`
-*   When using a **[culfw][]**-based device (**[CUL][]/[COC][]/...**), flash
-    the new firmware to the device with serial *KEQ0123456*:  
+*   When using a **[culfw][]**-, **[a-culfw][]**- or **[tsculfw][]**-based
+    device (**[CUL][]/[COC][]/...**), flash the new firmware to the device
+    with serial *KEQ0123456*:  
      `./flash-ota -f hm_cc_rt_dn_update_V1_4_001_141020.eq3 -s KEQ0123456 -c /dev/ttyACM0`
+*   When using the **[HM-MOD-UART][]**, flash the new firmware to the device
+    with serial *KEQ0123456*:  
+     `./flash-ota -f hm_cc_rt_dn_update_V1_4_001_141020.eq3 -s KEQ0123456 -U /dev/ttyAMA0`
+
+**Automatic firmware-updates:**  
+The options `-C` (HMID of central), `-D` (HMID of device) and `-K` (AES key w/
+index) can be used to send a device to the bootloader automatically without
+manually rebooting the device while pressing buttons:
+
+`./flash-ota -f hm_cc_rt_dn_update_V1_4_001_141020.eq3 -C ABCDEF -D 012345 -K 01:00112233445566778899AABBCCDDEEFF`
+
+`-K` is only needed, when AES signing is active on the device.
+
+**Acknowledgments:**  
+flash-ota uses the public domain [AES implementation by Brad Conte][] to answer
+signing-requests with culfw-devices.
 
 [eQ-3]: http://www.eq-3.de/downloads.html
 [culfw]: http://culfw.de/culfw.html
+[a-culfw]: https://forum.fhem.de/index.php?topic=35064.0
+[tsculfw]: https://forum.fhem.de/index.php?topic=24436.0
 [CUL]: http://busware.de/tiki-index.php?page=CUL
 [COC]: http://busware.de/tiki-index.php?page=COC
+[HM-MOD-UART]: https://www.elv.de/homematic-funkmodul-fuer-raspberry-pi-bausatz.html
+[AES implementation by Brad Conte]: https://github.com/B-Con/crypto-algorithms