X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/m1-debian/blobdiff_plain/2ea97406de8358a62cc2759c52bf14aee772acad..6a157c5691b92cacec0517926cd75a014cbb67ea:/doc/asahi.txt diff --git a/doc/asahi.txt b/doc/asahi.txt index a07aecf..79a12fb 100644 --- a/doc/asahi.txt +++ b/doc/asahi.txt @@ -1,3 +1,9 @@ +# This is a developer quickstart guide for a tethered boot. If you're looking +# for an enduser guide see: https://github.com/AsahiLinux/docs/wiki/Debian +# If you find errors or I should have elaborated more to get to going faster, +# please let me know in IRC. My nick is Glanzmann or drop me an email at +# thomas@glanzmann.de + # Boot into macos # Extract the firmware and save it somewhere you have access to. @@ -12,17 +18,14 @@ diskutil apfs resizeContainer disk0s2 200GB # finished and press Return to shutdown your system. curl -L https://mrcn.st/alxsh | sh -# 1. Press and hold down the power button to power on the system. -# * It is important that the system be fully powered off before this step, -# and that you press and hold down the button once, not multiple times. -# This is required to put the machine into the right mode. -# 2. Release it once 'Entering startup options' is displayed. -# 3. Choose Options. -# 4. You will briefly see a 'macOS Recovery' dialog. -# * If you are asked to 'Select a volume to recover', -# then choose your normal macOS volume and click Next. -# 5. Click on the Utilities menu and select Terminal. -# 6. Type the following command and follow the prompts: +# Wait for the system to shutdown and the LEDs turn off. Than wait another 5 +# seconds. Now press and do _not_ let go of the power button for 15 seconds. +# In the boot picker, select 'Options' and select Utilities > Terminal. In this +# terminal execute. If you screw the power button holding, turn the System off by +# pressing the power button until it is off and start from the beginning of this +# paragraph. + +/Volumes/Linux/step2.sh # Create an EFI parition because the final layout will have that diskutil list