X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/m1-debian/blobdiff_plain/7f89d5b07b383cd80b717fef756324999a33a6b6..f75bb0316722213ed7f8137c09051add8e25391b:/README.md diff --git a/README.md b/README.md index 87f1a6e..ee53686 100644 --- a/README.md +++ b/README.md @@ -2,13 +2,23 @@ This pages explains how to install Debian on Apple Silicon machines. # Tripwires The USB-A Port on the Mac Mini will not work in u-boot and grub. The two -additional USB-3 ports on the iMac 4 port model also don't work in u-boot, grub +additional USB-3 ports on the iMac 4 port model don't work in u-boot, grub and Linux. In order to install Linux on a FileVault-enabled Mac run the installer from Recovery open Disk Utility > Expanding "Macintosh HD" > -Selecting locked volume > click "Mount". +Selecting locked volume > click "Mount". Debian does not include the choosen +EFI patch. As a result it will always pick the first ESP partition. This can be +problematic if you're using multiple ESP partitions for example when having +multiple Linux and BSD installations. # Artefacts -If you don't want to use the prebuild artefacts, you can build them yourself using the [bootstrap.sh](https://git.zerfleddert.de/cgi-bin/gitweb.cgi/m1-debian/blob_plain/refs/heads/master:/bootstrap.sh) script. +If you don't want to use the prebuild artefacts, you can build them yourself +using the following scripts: + + - prepare_rust.sh - Prepares a rust installation suitable for kernel compilation + - m1n1_uboot_kernel.sh - Builds m1n1, u-boot and the kernel including gpu support. + - mesa.sh - Creates mesa packages + - bootstrap.sh - Creates Debian root and live filesystem + - meta.sh - Meta package which makes sure that we always get latest and greatest kernel. # Asahi installer @@ -18,9 +28,9 @@ If you don't want to use the prebuild artefacts, you can build them yourself usi * In the boot picker, choose Options. Once loaded, open a Terminal under Utilities > Terminal -* Run the asahi installer and select Debian (1): +* Run the asahi installer and select Debian: - curl -sL tg.st/d | sh + curl -sL https://tg.st/d | sh * Follow the installer instructions. @@ -32,7 +42,7 @@ If you don't want to use the prebuild artefacts, you can build them yourself usi * Configure wifi by editing the wpa_supplicant.conf, enabling the interface and remove the # before allow-hotplug to enable it during boot. vi /etc/wpa_supplicant/wpa_supplicant.conf - ifup wlp1s0f0 + ifup wlan0 vi /etc/network/interfaces * Reboot to see if grub was correctly installed @@ -41,6 +51,7 @@ If you don't want to use the prebuild artefacts, you can build them yourself usi * Install a desktop environment for example blackbox + apt-get update apt-get install -y xinit blackbox xterm firefox-esr lightdm * Create yourself an unprivileged user @@ -53,80 +64,30 @@ If you don't want to use the prebuild artefacts, you can build them yourself usi apt update apt install -y openssh-server -# Debian Installer -[Video Recording](https://tg.st/u/m1-d-i.mp4) - -**Do not use. It is broken at the moment.** - -* Prerequisites - - * USB Stick. this is what this guide assumes, but it is also possible to run the Debian installer from another PC using m1n1 chainloading. But if you know how to do that, you probably don't need this guide. - * If possible use an Ethernet Dongle, less typing. - -* Poweroff your Mac. Hold and press the power button until you see a wheel chain and Options written below. Approx 20 seconds. - -* In the boot picker, choose Options. Once loaded, open a Terminal under Utilities > Terminal - -* Run the asahi installer and select m1n1+UEFI: - curl -sL tg.st/d | sh - -* Follow the installer instructions. - -* Create USB Stick with a single vfat partition on it and untar the modified Debian installer on it. On Linux you would use the following: - - # Identify the usb stick device - lsblk - DEVICE=/dev/sdX - parted -a optimal $DEVICE mklabel msdos - parted -a optimal $DEVICE mkpart primary fat32 2048s 100% - mkfs.vfat ${DEVICE}1 - - mount /dev/sdX1 /mnt - cd /mnt - curl -sL https://tg.st/u/m1-d-i.tar | tar -xf - - umount /mnt - -* Reboot with the USB stick connected, the Debian installer should automatically start, if it doesn't load the kernel and initrd manually, you can use tab. For x try 0,1,2,... - - linux (hdX,msdos1)/vmlinuz expert net.ifnames=0 - initrd (hdx,msdos1)/initrd.gz - -* If you need wifi, on the first installer page press **Fn + Option + F2** to change to the second terminal, press **return** to activate the console, and issue the following commands to configure wifi - - ./wifi.sh - -* Switch back to the primary console by pressing **Fn + Option + F1**. - -* Follow the installer along until you end up in the partitioning menu - - * Create one 256M EFI system partition. 512M and 1G partitions fail with an error about wrong clustersize. - * Create another partition for root - -* When you get an error about grub failing, switch to the third console by pressing **Fn + Option + F2**, press **return** to active the console unless already activated, and issue the following commands: - - ./boot.sh - -* Switch back to the installer console by pressing **Fn + Option + F1** and continue the installer besides errors. The system will reboot into the newly installed system. +* Consult the **[/root/quickstart.txt](https://git.zerfleddert.de/cgi-bin/gitweb.cgi/m1-debian/blob_plain/refs/heads/master:/files/quickstart.txt)** file to find out how to do other interesting things. # Livesystem + [Video Recording](https://tg.st/u/live.mp4) + * Prerequisites - * USB Stick. this is what this guide assumes, but it is also possible to run the Debian installer from another PC using m1n1 chainloading. But if you know how to do that, you probably don't need this guide. - * If possible use an Ethernet Dongle, less typing. + - USB Stick. this is what this guide assumes, but it is also possible + to run the Debian livesystem from another PC using m1n1 chainloading. + But if you know how to do that, you probably don't need this guide. + - If possible use an Ethernet Dongle, less typing. * Create USB Stick with a single vfat partition on it and untar the modified Debian installer on it. Instructions for Linux: # Identify the usb stick device lsblk + DEVICE=/dev/sdX parted -a optimal $DEVICE mklabel msdos parted -a optimal $DEVICE mkpart primary fat32 2048s 100% mkfs.vfat ${DEVICE}1 - - mount /dev/sdX1 /mnt - cd /mnt - curl -sL https://tg.st/u/asahi-debian-live.tar | tar -xf - + mount ${DEVICE}1 /mnt + curl -sL https://tg.st/u/asahi-debian-live.tar | tar -C /mnt -xf - umount /mnt In order to format the usb stick under Macos, open the disk utility, right-click on the usb stick (usually the lowest device in the list) and select erase. Choose the following options: @@ -143,9 +104,9 @@ Than open a terminal, and run the following commands: * You need to run the asahi installer and have either an OS installed or m1n1+UEFI. -* If you have a EFI binary on the NVMe and want to boot from the usb stick, you need to interrupt u-boot on the countdoun by pressing any key and run the following comamnd to boot from usb: +* If you have a EFI binary on the NVMe and want to boot from the usb stick, you need to interrupt u-boot on the countdown by pressing any key and run the following comamnd to boot from usb: - run bootcmd_usb0 + env set boot_efi_bootmgr; run bootcmd_usb0 * Reboot with the USB stick connected, the Debian livesystem should automatically start, if it doesn't load the kernel and initrd manually, you can use tab. For x try 0,1,2,... @@ -156,3 +117,115 @@ Than open a terminal, and run the following commands: * Log in as **root** without password. * Consult the **[/root/quickstart.txt](https://git.zerfleddert.de/cgi-bin/gitweb.cgi/m1-debian/blob_plain/refs/heads/master:/files/quickstart.txt)** file to find out how to get the networking up, etc. + +# FAQ + +## Why has there been no kernel update? + +For Debian stable I'm currently unable to update the kernel due to the fact +that the kernel requires new mesa packages and the new mesa package needs too +many dependencies which are not in Debian stable and I'm not willing to add +that many new packages. So I recommend that if you want the latest asahi +kernel, mesa, sound and other packages, switch to testing and use Thomas +Renards packages for testing. + +## How to enable spakers? + +Currently speakers are only supported on M1 air. Install the necessary packages: + + apt update + apt upgrade -y + apt dist-upgrade -y + apt install -y alsa-ucm-conf-asahi speakersafetyd + reboot + +After the reboot I need to restart the speakersafetyd in order to hear sound out of the speakers: + + sudo systemctl restart speakersafetyd + +## Does it work on M2? + +Yes, M3 is not yet supported. + +## Are you still maintaining this? + +Yes, I do and will continue doing this until there is an official Debian installer. + +## If I install Debian, will it be easy to update the Asahi work as it develops? + +Yes, long answer below. + +To update the kernel to the lastest "stable" asahi branch you need to run +as root: + + apt update + apt upgrade + +For installations before 2022-12-12, see + +Later it might be necessary to upgrade the stub partion in order to +support the GPU code. As soon as that happens, I'll add the +instructions and a video in order to do so, but short version is: + + - Backup /boot/efi/EFI + - Delete the old stub and efi/esp partition + - Rerun the asahi installer with m1n1+u-boot option + - Put the /boot/efi/EFI back + +So, you never need to reinstall Debian. Kernel updates are easy, stub +updates are a little bit more cumbersome but also seldom. + +## How do I compile zfs on apple silicon debian? + +- In order to build zfs you need the rust environment. So from the m1-debian + repository you have to run these scripts: + + ./dependencies.sh + ./prepare_rust.sh + +- Prepare your zfs build environment. You need to replace + /home/sithglan/work/m1-debian with your path to + your m1-debian checkout: + + export CARGO_HOME="/home/sithglan/work/m1-debian/build/cargo" + export RUSTUP_HOME="/home/sithglan/work/m1-debian/build/rust" + source "/home/sithglan/work/m1-debian/build/cargo/env" + +- Tell zfs which version of clang you use to compile the kernel: + + export KERNEL_LLVM=-15 + +- Checkout ZFS: + + git clone https://github.com/openzfs/zfs + cd ./zfs + git checkout master + +- Apply the following patch: + + diff --git a/META b/META + index 3919b0d..67c9f7d 100644 + --- a/META + +++ b/META + @@ -4,7 +4,7 @@ Branch: 1.0 + Version: 2.2.99 + Release: 1 + Release-Tags: relext + -License: CDDL + +License: GPL + Author: OpenZFS + Linux-Maximum: 6.4 + Linux-Minimum: 3.10 + +- Build ZFS: + + sh autogen.sh + ./configure + make -s -j$(nproc) + +- Follow the instructions on how to install it. + +## What about gnome? + +You need an unpriviledged user to log in. You should delete /etc/network/interfaces in order to manage the network under gnome. If you don't have an US keyboard, you can change the settings in Gnome > Settings > Keyboard. +