X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/ms2-kexec/blobdiff_plain/bf9a825625a69985e8f8f4cb8262b3cb4ae9155c..0c549ba1cfe1d2d61c07eccab7f274740b706ed6:/proc-macros.S diff --git a/proc-macros.S b/proc-macros.S index 7d63bea..34261f9 100644 --- a/proc-macros.S +++ b/proc-macros.S @@ -61,27 +61,37 @@ .endm /* - * cache_line_size - get the cache line size from the CSIDR register - * (available on ARMv7+). It assumes that the CSSR register was configured - * to access the L1 data cache CSIDR. + * dcache_line_size - get the minimum D-cache line size from the CTR register + * on ARMv7. */ .macro dcache_line_size, reg, tmp - mrc p15, 1, \tmp, c0, c0, 0 @ read CSIDR - and \tmp, \tmp, #7 @ cache line size encoding - mov \reg, #16 @ size offset + mrc p15, 0, \tmp, c0, c0, 1 @ read ctr + lsr \tmp, \tmp, #16 + and \tmp, \tmp, #0xf @ cache line size encoding + mov \reg, #4 @ bytes per word mov \reg, \reg, lsl \tmp @ actual cache line size .endm +/* + * icache_line_size - get the minimum I-cache line size from the CTR register + * on ARMv7. + */ + .macro icache_line_size, reg, tmp + mrc p15, 0, \tmp, c0, c0, 1 @ read ctr + and \tmp, \tmp, #0xf @ cache line size encoding + mov \reg, #4 @ bytes per word + mov \reg, \reg, lsl \tmp @ actual cache line size + .endm /* * Sanity check the PTE configuration for the code below - which makes - * certain assumptions about how these bits are layed out. + * certain assumptions about how these bits are laid out. */ #ifdef CONFIG_MMU #if L_PTE_SHARED != PTE_EXT_SHARED #error PTE shared bit mismatch #endif -#if (L_PTE_EXEC+L_PTE_USER+L_PTE_WRITE+L_PTE_DIRTY+L_PTE_YOUNG+\ +#if (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\ L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED #error Invalid Linux PTE bit settings #endif @@ -99,6 +109,10 @@ * 110x 0 1 0 r/w r/o * 11x0 0 1 0 r/w r/o * 1111 0 1 1 r/w r/w + * + * If !CONFIG_CPU_USE_DOMAINS, the following permissions are changed: + * 110x 1 1 1 r/o r/o + * 11x0 1 1 1 r/o r/o */ .macro armv6_mt_table pfx \pfx\()_mt_table: @@ -121,7 +135,7 @@ .endm .macro armv6_set_pte_ext pfx - str r1, [r0], #-2048 @ linux version + str r1, [r0], #2048 @ linux version bic r3, r1, #0x000003fc bic r3, r3, #PTE_TYPE_MASK @@ -132,17 +146,20 @@ and r2, r1, #L_PTE_MT_MASK ldr r2, [ip, r2] - tst r1, #L_PTE_WRITE - tstne r1, #L_PTE_DIRTY - orreq r3, r3, #PTE_EXT_APX + eor r1, r1, #L_PTE_DIRTY + tst r1, #L_PTE_DIRTY|L_PTE_RDONLY + orrne r3, r3, #PTE_EXT_APX tst r1, #L_PTE_USER orrne r3, r3, #PTE_EXT_AP1 +#ifdef CONFIG_CPU_USE_DOMAINS + @ allow kernel read/write access to read-only user pages tstne r3, #PTE_EXT_APX bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0 +#endif - tst r1, #L_PTE_EXEC - orreq r3, r3, #PTE_EXT_XN + tst r1, #L_PTE_XN + orrne r3, r3, #PTE_EXT_XN orr r3, r3, r2 @@ -170,9 +187,9 @@ * 1111 0xff r/w r/w */ .macro armv3_set_pte_ext wc_disable=1 - str r1, [r0], #-2048 @ linux version + str r1, [r0], #2048 @ linux version - eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY + eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY bic r2, r1, #PTE_SMALL_AP_MASK @ keep C, B bits bic r2, r2, #PTE_TYPE_MASK @@ -181,7 +198,7 @@ tst r3, #L_PTE_USER @ user? orrne r2, r2, #PTE_SMALL_AP_URO_SRW - tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ write and dirty? + tst r3, #L_PTE_RDONLY | L_PTE_DIRTY @ write and dirty? orreq r2, r2, #PTE_SMALL_AP_UNO_SRW tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young? @@ -193,7 +210,7 @@ bicne r2, r2, #PTE_BUFFERABLE #endif .endif - str r2, [r0] @ hardware version + str r2, [r0] @ hardware version .endm @@ -213,9 +230,9 @@ * 1111 11 r/w r/w */ .macro xscale_set_pte_ext_prologue - str r1, [r0], #-2048 @ linux version + str r1, [r0] @ linux version - eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY + eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY bic r2, r1, #PTE_SMALL_AP_MASK @ keep C, B bits orr r2, r2, #PTE_TYPE_EXT @ extended page @@ -223,7 +240,7 @@ tst r3, #L_PTE_USER @ user? orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w - tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ write and dirty? + tst r3, #L_PTE_RDONLY | L_PTE_DIRTY @ write and dirty? orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w @ combined with user -> user r/w .endm @@ -232,7 +249,7 @@ tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young? movne r2, #0 @ no -> fault - str r2, [r0] @ hardware version + str r2, [r0, #2048]! @ hardware version mov ip, #0 mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line mcr p15, 0, ip, c7, c10, 4 @ data write barrier