]> cvs.zerfleddert.de Git - proxmark3-svn/blame - README.md
reenable intermediate "Waiting for a response from the proxmark..." message
[proxmark3-svn] / README.md
CommitLineData
1ccdd4f6 1# proxmark3: the official Proxmark repository!
770f7345 2
b27c1909
W
3The proxmark3 is a powerful general purpose RFID tool, the size of a deck
4of cards, designed to snoop, listen and emulate everything from
1ccdd4f6 5**Low Frequency (125kHz)** to **High Frequency (13.56MHz)** tags.
770f7345 6
b27c1909
W
7This repository contains enough software, logic (for the FPGA), and design
8documentation for the hardware that you could, at least in theory,
9do something useful with a proxmark3.
10
1ccdd4f6
QP
11## Resources
12
13* [This repository!](https://github.com/Proxmark/proxmark3)
14* [The Wiki](https://github.com/Proxmark/proxmark3/wiki)
15* [The GitHub Pages website](http://proxmark.github.io/proxmark3/)
16* [The Forum](http://www.proxmark.org/forum)
17* The IRC channel: irc.freenode.org #proxmark3 ([chat in your browser](http://webchat.freenode.net/?channels=#proxmark3))
18* [The Homebrew formula repository](https://github.com/Proxmark/homebrew-proxmark3)
b27c1909 19
1ccdd4f6 20## Development
b27c1909
W
21
22The tools required to build or run the project will vary depending on
1ccdd4f6 23your operating system. Please refer to [the wiki](https://github.com/Proxmark/proxmark3/wiki) for details.
770f7345 24
1ccdd4f6 25## Obtaining hardware
770f7345 26
3e7df262 27The Proxmark3 is available for purchase (assembled and tested) from the
b27c1909 28following locations:
770f7345 29
5eacacfd 30| Distributor Name | Warehouse Location | Entity Location |
31|------------------|--------------------|-----------------|
32| [RyscCorp](https://proxmark3.com/) | USA | USA |
33| [Hackerwarehouse](https://hackerwarehouse.com/) | USA | USA |
34| [Elechouse](http://www.elechouse.com/) | HK | HK |
35| [Lab401](https://lab401.com/) | EU | HK |
36| [RFxSecure](http://www.rfxsecure.com/) | CN | SG |
37| [Sneaktechnology](https://www.sneaktechnology.com/) | CN | CN |
9ebbfd89 38
3e7df262 39
b27c1909 40Most of the ultra-low-volume contract assemblers could put
770f7345 41something like this together with a reasonable yield. A run of around
42a dozen units is probably cost-effective. The BOM includes (possibly-
43outdated) component pricing, and everything is available from Digikey
44and the usual distributors.
45
46If you've never assembled a modern circuit board by hand, then this is
47not a good place to start. Some of the components (e.g. the crystals)
48must not be assembled with a soldering iron, and require hot air.
49
50The schematics are included; the component values given are not
51necessarily correct for all situations, but it should be possible to do
52nearly anything you would want with appropriate population options.
53
54The printed circuit board artwork is also available, as Gerbers and an
55Excellon drill file.
56
57
1ccdd4f6 58## License
770f7345 59
60This program is free software; you can redistribute it and/or modify
61it under the terms of the GNU General Public License as published by
62the Free Software Foundation; either version 2 of the License, or
63(at your option) any later version.
64
65This program is distributed in the hope that it will be useful,
66but WITHOUT ANY WARRANTY; without even the implied warranty of
67MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
68GNU General Public License for more details.
69
70You should have received a copy of the GNU General Public License
71along with this program; if not, write to the Free Software
72Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
73
74
75Jonathan Westhues
76user jwesthues, at host cq.cx
77
78May 2007, Cambridge MA
Impressum, Datenschutz