[proxmark3-svn] / armsrc / mifarecmd.c

//-----------------------------------------------------------------------------\r
// Merlok - June 2011, 2012\r
// Gerhard de Koning Gans - May 2008\r
// Hagen Fritsch - June 2010\r
// Midnitesnake - Dec 2013\r
// Andy Davies  - Apr 2014\r
// Iceman - May 2014\r
//\r
// This code is licensed to you under the terms of the GNU GPL, version 2 or,\r
// at your option, any later version. See the LICENSE.txt file for the text of\r
// the license.\r
//-----------------------------------------------------------------------------\r
// Routines to support ISO 14443 type A.\r
//-----------------------------------------------------------------------------\r
\r
#include "mifarecmd.h"\r
#include "apps.h"\r
#include "util.h"\r
//#include "../client/loclass/des.h"\r
#include "des.h"\r
#include "crc.h"\r
\r
//-----------------------------------------------------------------------------\r
// Select, Authenticate, Read a MIFARE tag. \r
// read block\r
//-----------------------------------------------------------------------------\r
void MifareReadBlock(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)\r
{\r
  // params\r
	uint8_t blockNo = arg0;\r
	uint8_t keyType = arg1;\r
	uint64_t ui64Key = 0;\r
	ui64Key = bytes_to_num(datain, 6);\r
	\r
	// variables\r
	byte_t isOK = 0;\r
	byte_t dataoutbuf[16];\r
	uint8_t uid[10];\r
	uint32_t cuid;\r
	struct Crypto1State mpcs = {0, 0};\r
	struct Crypto1State *pcs;\r
	pcs = &mpcs;\r
\r
	// clear trace\r
	clear_trace();\r
	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
	LED_A_ON();\r
	LED_B_OFF();\r
	LED_C_OFF();\r
\r
	while (true) {\r
		if(!iso14443a_select_card(uid, NULL, &cuid)) {\r
			if (MF_DBGLEVEL >= 1)	Dbprintf("Can't select card");\r
			break;\r
		};\r
\r
		if(mifare_classic_auth(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST)) {\r
			if (MF_DBGLEVEL >= 1)	Dbprintf("Auth error");\r
			break;\r
		};\r
		\r
		if(mifare_classic_readblock(pcs, cuid, blockNo, dataoutbuf)) {\r
			if (MF_DBGLEVEL >= 1)	Dbprintf("Read block error");\r
			break;\r
		};\r
\r
		if(mifare_classic_halt(pcs, cuid)) {\r
			if (MF_DBGLEVEL >= 1)	Dbprintf("Halt error");\r
			break;\r
		};\r
		\r
		isOK = 1;\r
		break;\r
	}\r
	\r
	//  ----------------------------- crypto1 destroy\r
	crypto1_destroy(pcs);\r
	\r
	if (MF_DBGLEVEL >= 2)	DbpString("READ BLOCK FINISHED");\r
\r
	LED_B_ON();\r
	cmd_send(CMD_ACK,isOK,0,0,dataoutbuf,16);\r
	LED_B_OFF();\r
\r
	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
	LEDsoff();\r
}\r
\r
\r
void MifareUC_Auth1(uint8_t arg0, uint8_t *datain){\r
\r
	byte_t dataoutbuf[16] = {0x00};\r
	uint8_t uid[10] = {0x00};\r
	uint32_t cuid = 0x00;\r
\r
	LED_A_ON(); LED_B_OFF(); LED_C_OFF();\r
    \r
	clear_trace();\r
	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
	if(!iso14443a_select_card(uid, NULL, &cuid)) {\r
		if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card");\r
		OnError(0);\r
		return;\r
	};\r
	\r
	if(mifare_ultra_auth1(dataoutbuf)){\r
		if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Authentication part1: Fail.");\r
		OnError(1);\r
		return;\r
	}\r
\r
	if (MF_DBGLEVEL >= MF_DBG_EXTENDED) DbpString("AUTH 1 FINISHED");\r
    \r
    cmd_send(CMD_ACK,1,cuid,0,dataoutbuf,11);\r
	LEDsoff();\r
}\r
void MifareUC_Auth2(uint32_t arg0, uint8_t *datain){\r
\r
	uint8_t key[16] = {0x00};\r
	byte_t dataoutbuf[16] = {0x00};\r
    \r
	memcpy(key, datain, 16);\r
    \r
	LED_A_ON();	LED_B_OFF(); LED_C_OFF();\r
	\r
	if(mifare_ultra_auth2(key, dataoutbuf)){\r
	    if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Authentication part2: Fail...");\r
		OnError(1);\r
		return;			\r
	}\r
	\r
	if (MF_DBGLEVEL >= MF_DBG_EXTENDED) DbpString("AUTH 2 FINISHED");\r
    \r
	cmd_send(CMD_ACK,1,0,0,dataoutbuf,11);\r
	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
	LEDsoff();\r
}\r
\r
void MifareUReadBlock(uint8_t arg0, uint8_t arg1, uint8_t *datain)\r
{\r
	uint8_t blockNo = arg0;\r
	byte_t dataout[16] = {0x00};\r
	uint8_t uid[10] = {0x00};\r
	uint8_t key[16] = {0x00};\r
    bool usePwd = (arg1 == 1);\r
	\r
	LED_A_ON();	LED_B_OFF(); LED_C_OFF();\r
    \r
	clear_trace();\r
	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
    \r
	int len = iso14443a_select_card(uid, NULL, NULL);\r
	if(!len) {\r
		if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card (RC:%02X)",len);\r
		OnError(1);\r
		return;\r
	}\r
       \r
	 // authenticate here.\r
	if ( usePwd ) {\r
		\r
		memcpy(key, datain, 16);\r
		 \r
		// Dbprintf("KEY: %02x %02x %02x %02x %02x %02x %02x %02x", key[0],key[1],key[2],key[3],key[4],key[5],key[6],key[7] );\r
		// Dbprintf("KEY: %02x %02x %02x %02x %02x %02x %02x %02x", key[8],key[9],key[10],key[11],key[12],key[13],key[14],key[15] );\r
\r
		uint8_t a[8] = {1,1,1,1,1,1,1,1 };\r
		uint8_t b[8] = {0x00};\r
		uint8_t enc_b[8] = {0x00};\r
		uint8_t ab[16] = {0x00};\r
		uint8_t enc_ab[16] = {0x00};		\r
		uint8_t enc_key[8] = {0x00};\r
		\r
		uint16_t len;\r
		uint8_t receivedAnswer[MAX_FRAME_SIZE];\r
		uint8_t receivedAnswerPar[MAX_PARITY_SIZE];\r
	\r
		len = mifare_sendcmd_short(NULL, 1, 0x1A, 0x00, receivedAnswer,receivedAnswerPar ,NULL);\r
		if (len != 11) {\r
			if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Cmd Error: %02x", receivedAnswer[0]);\r
			OnError(1);\r
			return;\r
		}\r
	\r
		// tag nonce.\r
		memcpy(enc_b,receivedAnswer+1,8);\r
\r
		// decrypt nonce.\r
		tdes_2key_dec(b, enc_b, 8, key );\r
\r
		Dbprintf("enc_B: %02x %02x %02x %02x %02x %02x %02x %02x", enc_b[0],enc_b[1],enc_b[2],enc_b[3],enc_b[4],enc_b[5],enc_b[6],enc_b[7] );\r
		Dbprintf("    B: %02x %02x %02x %02x %02x %02x %02x %02x", b[0],b[1],b[2],b[3],b[4],b[5],b[6],b[7] );\r
		rol(b,8);\r
		\r
		memcpy(ab  ,a,8);\r
		memcpy(ab+8,b,8);\r
\r
		Dbprintf("AB: %02x %02x %02x %02x %02x %02x %02x %02x", ab[0],ab[1],ab[2],ab[3],ab[4],ab[5],ab[6],ab[7] );\r
		Dbprintf("AB: %02x %02x %02x %02x %02x %02x %02x %02x", ab[8],ab[9],ab[10],ab[11],ab[12],ab[13],ab[14],ab[15] );\r
\r
		// encrypt\r
		tdes_2key_enc(enc_ab, ab, 16, key);\r
\r
		Dbprintf("e_AB: %02x %02x %02x %02x %02x %02x %02x %02x", enc_ab[0],enc_ab[1],enc_ab[2],enc_ab[3],enc_ab[4],enc_ab[5],enc_ab[6],enc_ab[7] );\r
		Dbprintf("e_enc_ab: %02x %02x %02x %02x %02x %02x %02x %02x", enc_ab[8],enc_ab[9],enc_ab[10],enc_ab[11],enc_ab[12],enc_ab[13],enc_ab[14],enc_ab[15] );\r
\r
		len = mifare_sendcmd_short_mfucauth(NULL, 1, 0xAF, enc_ab, receivedAnswer, receivedAnswerPar, NULL);\r
		if (len != 11) {\r
			if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Cmd Error: %02x", receivedAnswer[0]);\r
			OnError(1);\r
			return;\r
		}\r
	\r
		// the tags' encryption of our nonce, A.\r
		memcpy(enc_key, receivedAnswer+1, 8);\r
		\r
		// clear B.\r
		memset(b, 0x00, 8);\r
		\r
		// decrypt \r
		tdes_2key_dec(b, enc_key, 8, key );\r
		if ( memcmp(a, b, 8) == 0 )\r
			Dbprintf("Verified key");\r
		else\r
			Dbprintf("failed authentication");\r
		\r
		Dbprintf("a: %02x %02x %02x %02x %02x %02x %02x %02x", a[0],a[1],a[2],a[3],a[4],a[5],a[6],a[7] );\r
		Dbprintf("b: %02x %02x %02x %02x %02x %02x %02x %02x", b[0],b[1],b[2],b[3],b[4],b[5],b[6],b[7] );\r
	}\r
		\r
	if( mifare_ultra_readblock(blockNo, dataout) ) {\r
		if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Read block error");\r
		OnError(2);\r
		return;\r
	}\r
        \r
	if( mifare_ultra_halt() ) {\r
		if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Halt error");\r
		OnError(3);\r
		return;\r
	}\r
		\r
    cmd_send(CMD_ACK,1,0,0,dataout,16);\r
	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
	LEDsoff();\r
}\r
//-----------------------------------------------------------------------------\r
// Select, Authenticate, Read a MIFARE tag. \r
// read sector (data = 4 x 16 bytes = 64 bytes, or 16 x 16 bytes = 256 bytes)\r
//-----------------------------------------------------------------------------\r
void MifareReadSector(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)\r
{\r
  // params\r
	uint8_t sectorNo = arg0;\r
	uint8_t keyType = arg1;\r
	uint64_t ui64Key = 0;\r
	ui64Key = bytes_to_num(datain, 6);\r
	\r
	// variables\r
	byte_t isOK = 0;\r
	byte_t dataoutbuf[16 * 16];\r
	uint8_t uid[10];\r
	uint32_t cuid;\r
	struct Crypto1State mpcs = {0, 0};\r
	struct Crypto1State *pcs;\r
	pcs = &mpcs;\r
\r
	// clear trace\r
	clear_trace();\r
\r
	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
	LED_A_ON();\r
	LED_B_OFF();\r
	LED_C_OFF();\r
\r
	isOK = 1;\r
	if(!iso14443a_select_card(uid, NULL, &cuid)) {\r
		isOK = 0;\r
		if (MF_DBGLEVEL >= 1)	Dbprintf("Can't select card");\r
	}\r
\r
	\r
	if(isOK && mifare_classic_auth(pcs, cuid, FirstBlockOfSector(sectorNo), keyType, ui64Key, AUTH_FIRST)) {\r
		isOK = 0;\r
		if (MF_DBGLEVEL >= 1)	Dbprintf("Auth error");\r
	}\r
	\r
	for (uint8_t blockNo = 0; isOK && blockNo < NumBlocksPerSector(sectorNo); blockNo++) {\r
		if(mifare_classic_readblock(pcs, cuid, FirstBlockOfSector(sectorNo) + blockNo, dataoutbuf + 16 * blockNo)) {\r
			isOK = 0;\r
			if (MF_DBGLEVEL >= 1)	Dbprintf("Read sector %2d block %2d error", sectorNo, blockNo);\r
			break;\r
		}\r
	}\r
		\r
	if(mifare_classic_halt(pcs, cuid)) {\r
		if (MF_DBGLEVEL >= 1)	Dbprintf("Halt error");\r
	}\r
\r
	//  ----------------------------- crypto1 destroy\r
	crypto1_destroy(pcs);\r
	\r
	if (MF_DBGLEVEL >= 2) DbpString("READ SECTOR FINISHED");\r
\r
	LED_B_ON();\r
	cmd_send(CMD_ACK,isOK,0,0,dataoutbuf,16*NumBlocksPerSector(sectorNo));\r
	LED_B_OFF();\r
\r
	// Thats it...\r
	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
	LEDsoff();\r
}\r
\r
void MifareUReadCard(uint8_t arg0, int arg1, uint8_t *datain)\r
{\r
	// params\r
	uint8_t sectorNo = arg0;\r
	int Pages = arg1;\r
	int countpages = 0;\r
	byte_t dataout[176] = {0x00};;\r
	uint32_t cuid = 0x00;\r
\r
	LED_A_ON(); LED_B_OFF(); LED_C_OFF();\r
	clear_trace();\r
	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
	int len = iso14443a_select_card(NULL, NULL, &cuid);\r
	if (!len) {\r
		if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card (RC:%d)",len);\r
		OnError(1);\r
		return;\r
	}\r
	\r
	for (int i = 0; i < Pages; i++){\r
	\r
		len = mifare_ultra_readblock(sectorNo * 4 + i, dataout + 4 * i);\r
		\r
		if (len) {\r
			if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Read block %d error",i);\r
			OnError(2);\r
			return;\r
		} else {\r
			countpages++;\r
		}\r
	}\r
		\r
	len = mifare_ultra_halt();\r
	if (len) {\r
		if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Halt error");\r
		OnError(3);\r
		return;\r
	}\r
	\r
	if (MF_DBGLEVEL >= MF_DBG_ALL) Dbprintf("Pages read %d", countpages);\r
\r
	len = 16*4; //64 bytes\r
\r
	// Read a UL-C\r
	if (Pages == 44 && countpages > 16) \r
		len = 176;\r
\r
	cmd_send(CMD_ACK, 1, 0, 0, dataout, len);	\r
	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
	LEDsoff();\r
}\r
\r
\r
//-----------------------------------------------------------------------------\r
// Select, Authenticate, Write a MIFARE tag. \r
// read block\r
//-----------------------------------------------------------------------------\r
void MifareWriteBlock(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)\r
{\r
	// params\r
	uint8_t blockNo = arg0;\r
	uint8_t keyType = arg1;\r
	uint64_t ui64Key = 0;\r
	byte_t blockdata[16];\r
\r
	ui64Key = bytes_to_num(datain, 6);\r
	memcpy(blockdata, datain + 10, 16);\r
	\r
	// variables\r
	byte_t isOK = 0;\r
	uint8_t uid[10];\r
	uint32_t cuid;\r
	struct Crypto1State mpcs = {0, 0};\r
	struct Crypto1State *pcs;\r
	pcs = &mpcs;\r
\r
	// clear trace\r
	clear_trace();\r
\r
	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
	LED_A_ON();\r
	LED_B_OFF();\r
	LED_C_OFF();\r
\r
	while (true) {\r
			if(!iso14443a_select_card(uid, NULL, &cuid)) {\r
			if (MF_DBGLEVEL >= 1)	Dbprintf("Can't select card");\r
			break;\r
		};\r
\r
		if(mifare_classic_auth(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST)) {\r
			if (MF_DBGLEVEL >= 1)	Dbprintf("Auth error");\r
			break;\r
		};\r
		\r
		if(mifare_classic_writeblock(pcs, cuid, blockNo, blockdata)) {\r
			if (MF_DBGLEVEL >= 1)	Dbprintf("Write block error");\r
			break;\r
		};\r
\r
		if(mifare_classic_halt(pcs, cuid)) {\r
			if (MF_DBGLEVEL >= 1)	Dbprintf("Halt error");\r
			break;\r
		};\r
		\r
		isOK = 1;\r
		break;\r
	}\r
	\r
	//  ----------------------------- crypto1 destroy\r
	crypto1_destroy(pcs);\r
	\r
	if (MF_DBGLEVEL >= 2)	DbpString("WRITE BLOCK FINISHED");\r
\r
	LED_B_ON();\r
	cmd_send(CMD_ACK,isOK,0,0,0,0);\r
	LED_B_OFF();\r
\r
\r
	// Thats it...\r
	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
	LEDsoff();\r
}\r
\r
void MifareUWriteBlock(uint8_t arg0, uint8_t *datain)\r
{\r
    uint8_t blockNo = arg0;\r
	byte_t blockdata[16] = {0x00};\r
\r
    memcpy(blockdata, datain, 16);\r
        \r
	uint8_t uid[10] = {0x00};\r
\r
	LED_A_ON(); LED_B_OFF(); LED_C_OFF();\r
		\r
	clear_trace();\r
	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
	if(!iso14443a_select_card(uid, NULL, NULL)) {\r
		if (MF_DBGLEVEL >= 1)   Dbprintf("Can't select card");\r
		OnError(0);\r
		return;\r
	};\r
\r
	if(mifare_ultra_writeblock(blockNo, blockdata)) {\r
		if (MF_DBGLEVEL >= 1)   Dbprintf("Write block error");\r
		OnError(0);\r
		return;	};\r
\r
	if(mifare_ultra_halt()) {\r
		if (MF_DBGLEVEL >= 1)   Dbprintf("Halt error");\r
		OnError(0);\r
		return;\r
	};\r
		\r
	if (MF_DBGLEVEL >= 2)   DbpString("WRITE BLOCK FINISHED");\r
\r
	cmd_send(CMD_ACK,1,0,0,0,0);\r
	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
	LEDsoff();\r
}\r
\r
void MifareUWriteBlock_Special(uint8_t arg0, uint8_t *datain)\r
{\r
	uint8_t blockNo = arg0;\r
	byte_t blockdata[4] = {0x00};\r
	\r
	memcpy(blockdata, datain,4);\r
\r
	uint8_t uid[10] = {0x00};\r
	\r
	LED_A_ON(); LED_B_OFF(); LED_C_OFF();\r
	clear_trace();\r
	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
	if(!iso14443a_select_card(uid, NULL, NULL)) {\r
		if (MF_DBGLEVEL >= 1) Dbprintf("Can't select card");\r
		OnError(0);\r
		return;\r
	};\r
\r
	if(mifare_ultra_special_writeblock(blockNo, blockdata)) {\r
		if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
		OnError(0);\r
		return;\r
	};\r
\r
	if(mifare_ultra_halt()) {\r
		if (MF_DBGLEVEL >= 1) Dbprintf("Halt error");\r
		OnError(0);\r
		return;\r
	};\r
\r
	if (MF_DBGLEVEL >= 2) DbpString("WRITE BLOCK FINISHED");\r
\r
	cmd_send(CMD_ACK,1,0,0,0,0);\r
	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
	LEDsoff();\r
}\r
\r
void MifareUSetPwd(uint8_t arg0, uint8_t *datain){\r
	\r
	uint8_t pwd[16] = {0x00};\r
	byte_t blockdata[4] = {0x00};\r
	\r
	memcpy(pwd, datain, 16);\r
	\r
	LED_A_ON(); LED_B_OFF(); LED_C_OFF();\r
	clear_trace();\r
	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
	if(!iso14443a_select_card(NULL, NULL, NULL)) {\r
		if (MF_DBGLEVEL >= 1) Dbprintf("Can't select card");\r
		OnError(0);\r
		return;\r
	};\r
\r
	blockdata[0] = pwd[7];\r
	blockdata[1] = pwd[6];\r
	blockdata[2] = pwd[5];\r
	blockdata[3] = pwd[4];\r
	if(mifare_ultra_special_writeblock( 44, blockdata)) {\r
		if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
		OnError(44);\r
		return;\r
	};\r
\r
	blockdata[0] = pwd[3];\r
	blockdata[1] = pwd[2];\r
	blockdata[2] = pwd[1];\r
	blockdata[3] = pwd[0];\r
	if(mifare_ultra_special_writeblock( 45, blockdata)) {\r
		if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
		OnError(45);\r
		return;\r
	};\r
\r
	blockdata[0] = pwd[15];\r
	blockdata[1] = pwd[14];\r
	blockdata[2] = pwd[13];\r
	blockdata[3] = pwd[12];\r
	if(mifare_ultra_special_writeblock( 46, blockdata)) {\r
		if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
		OnError(46);\r
		return;\r
	};\r
\r
	blockdata[0] = pwd[11];\r
	blockdata[1] = pwd[10];\r
	blockdata[2] = pwd[9];\r
	blockdata[3] = pwd[8];\r
	if(mifare_ultra_special_writeblock( 47, blockdata)) {\r
		if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
		OnError(47);\r
		return;\r
	};	\r
\r
	if(mifare_ultra_halt()) {\r
		if (MF_DBGLEVEL >= 1) Dbprintf("Halt error");\r
		OnError(0);\r
		return;\r
	};\r
\r
	cmd_send(CMD_ACK,1,0,0,0,0);\r
	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
	LEDsoff();\r
}\r
\r
// Return 1 if the nonce is invalid else return 0\r
int valid_nonce(uint32_t Nt, uint32_t NtEnc, uint32_t Ks1, uint8_t *parity) {\r
	return ((oddparity((Nt >> 24) & 0xFF) == ((parity[0]) ^ oddparity((NtEnc >> 24) & 0xFF) ^ BIT(Ks1,16))) & \\r
	(oddparity((Nt >> 16) & 0xFF) == ((parity[1]) ^ oddparity((NtEnc >> 16) & 0xFF) ^ BIT(Ks1,8))) & \\r
	(oddparity((Nt >> 8) & 0xFF) == ((parity[2]) ^ oddparity((NtEnc >> 8) & 0xFF) ^ BIT(Ks1,0)))) ? 1 : 0;\r
}\r
\r
\r
//-----------------------------------------------------------------------------\r
// MIFARE nested authentication. \r
// \r
//-----------------------------------------------------------------------------\r
void MifareNested(uint32_t arg0, uint32_t arg1, uint32_t calibrate, uint8_t *datain)\r
{\r
	// params\r
	uint8_t blockNo = arg0 & 0xff;\r
	uint8_t keyType = (arg0 >> 8) & 0xff;\r
	uint8_t targetBlockNo = arg1 & 0xff;\r
	uint8_t targetKeyType = (arg1 >> 8) & 0xff;\r
	uint64_t ui64Key = 0;\r
\r
	ui64Key = bytes_to_num(datain, 6);\r
	\r
	// variables\r
	uint16_t rtr, i, j, len;\r
	uint16_t davg;\r
	static uint16_t dmin, dmax;\r
	uint8_t uid[10];\r
	uint32_t cuid, nt1, nt2, nttmp, nttest, ks1;\r
	uint8_t par[1];\r
	uint32_t target_nt[2], target_ks[2];\r
	\r
	uint8_t par_array[4];\r
	uint16_t ncount = 0;\r
	struct Crypto1State mpcs = {0, 0};\r
	struct Crypto1State *pcs;\r
	pcs = &mpcs;\r
	uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE];\r
\r
	uint32_t auth1_time, auth2_time;\r
	static uint16_t delta_time;\r
\r
	// free eventually allocated BigBuf memory\r
	BigBuf_free();\r
	// clear trace\r
	clear_trace();\r
	set_tracing(false);\r
	\r
	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
	LED_A_ON();\r
	LED_C_OFF();\r
\r
\r
	// statistics on nonce distance\r
	if (calibrate) {	// for first call only. Otherwise reuse previous calibration\r
		LED_B_ON();\r
		WDT_HIT();\r
\r
		davg = dmax = 0;\r
		dmin = 2000;\r
		delta_time = 0;\r
		\r
		for (rtr = 0; rtr < 17; rtr++) {\r
\r
			// prepare next select. No need to power down the card.\r
			if(mifare_classic_halt(pcs, cuid)) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("Nested: Halt error");\r
				rtr--;\r
				continue;\r
			}\r
\r
			if(!iso14443a_select_card(uid, NULL, &cuid)) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("Nested: Can't select card");\r
				rtr--;\r
				continue;\r
			};\r
\r
			auth1_time = 0;\r
			if(mifare_classic_authex(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST, &nt1, &auth1_time)) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("Nested: Auth1 error");\r
				rtr--;\r
				continue;\r
			};\r
\r
			if (delta_time) {\r
				auth2_time = auth1_time + delta_time;\r
			} else {\r
				auth2_time = 0;\r
			}\r
			if(mifare_classic_authex(pcs, cuid, blockNo, keyType, ui64Key, AUTH_NESTED, &nt2, &auth2_time)) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("Nested: Auth2 error");\r
				rtr--;\r
				continue;\r
			};\r
\r
			nttmp = prng_successor(nt1, 100);				//NXP Mifare is typical around 840,but for some unlicensed/compatible mifare card this can be 160\r
			for (i = 101; i < 1200; i++) {\r
				nttmp = prng_successor(nttmp, 1);\r
				if (nttmp == nt2) break;\r
			}\r
\r
			if (i != 1200) {\r
				if (rtr != 0) {\r
					davg += i;\r
					dmin = MIN(dmin, i);\r
					dmax = MAX(dmax, i);\r
				}\r
				else {\r
					delta_time = auth2_time - auth1_time + 32;  // allow some slack for proper timing\r
				}\r
				if (MF_DBGLEVEL >= 3) Dbprintf("Nested: calibrating... ntdist=%d", i);\r
			}\r
		}\r
		\r
		if (rtr <= 1)	return;\r
\r
		davg = (davg + (rtr - 1)/2) / (rtr - 1);\r
		\r
		if (MF_DBGLEVEL >= 3) Dbprintf("min=%d max=%d avg=%d, delta_time=%d", dmin, dmax, davg, delta_time);\r
\r
		dmin = davg - 2;\r
		dmax = davg + 2;\r
		\r
		LED_B_OFF();\r
	\r
	}\r
//  -------------------------------------------------------------------------------------------------	\r
	\r
	LED_C_ON();\r
\r
	//  get crypted nonces for target sector\r
	for(i=0; i < 2; i++) { // look for exactly two different nonces\r
\r
		target_nt[i] = 0;\r
		while(target_nt[i] == 0) { // continue until we have an unambiguous nonce\r
		\r
			// prepare next select. No need to power down the card.\r
			if(mifare_classic_halt(pcs, cuid)) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("Nested: Halt error");\r
				continue;\r
			}\r
\r
			if(!iso14443a_select_card(uid, NULL, &cuid)) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("Nested: Can't select card");\r
				continue;\r
			};\r
		\r
			auth1_time = 0;\r
			if(mifare_classic_authex(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST, &nt1, &auth1_time)) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("Nested: Auth1 error");\r
				continue;\r
			};\r
\r
			// nested authentication\r
			auth2_time = auth1_time + delta_time;\r
			len = mifare_sendcmd_shortex(pcs, AUTH_NESTED, 0x60 + (targetKeyType & 0x01), targetBlockNo, receivedAnswer, par, &auth2_time);\r
			if (len != 4) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("Nested: Auth2 error len=%d", len);\r
				continue;\r
			};\r
		\r
			nt2 = bytes_to_num(receivedAnswer, 4);		\r
			if (MF_DBGLEVEL >= 3) Dbprintf("Nonce#%d: Testing nt1=%08x nt2enc=%08x nt2par=%02x", i+1, nt1, nt2, par[0]);\r
			\r
			// Parity validity check\r
			for (j = 0; j < 4; j++) {\r
				par_array[j] = (oddparity(receivedAnswer[j]) != ((par[0] >> (7-j)) & 0x01));\r
			}\r
			\r
			ncount = 0;\r
			nttest = prng_successor(nt1, dmin - 1);\r
			for (j = dmin; j < dmax + 1; j++) {\r
				nttest = prng_successor(nttest, 1);\r
				ks1 = nt2 ^ nttest;\r
\r
				if (valid_nonce(nttest, nt2, ks1, par_array)){\r
					if (ncount > 0) { 		// we are only interested in disambiguous nonces, try again\r
						if (MF_DBGLEVEL >= 3) Dbprintf("Nonce#%d: dismissed (ambigous), ntdist=%d", i+1, j);\r
						target_nt[i] = 0;\r
						break;\r
					}\r
					target_nt[i] = nttest;\r
					target_ks[i] = ks1;\r
					ncount++;\r
					if (i == 1 && target_nt[1] == target_nt[0]) { // we need two different nonces\r
						target_nt[i] = 0;\r
						if (MF_DBGLEVEL >= 3) Dbprintf("Nonce#2: dismissed (= nonce#1), ntdist=%d", j);\r
						break;\r
					}\r
					if (MF_DBGLEVEL >= 3) Dbprintf("Nonce#%d: valid, ntdist=%d", i+1, j);\r
				}\r
			}\r
			if (target_nt[i] == 0 && j == dmax+1 && MF_DBGLEVEL >= 3) Dbprintf("Nonce#%d: dismissed (all invalid)", i+1);\r
		}\r
	}\r
\r
	LED_C_OFF();\r
	\r
	//  ----------------------------- crypto1 destroy\r
	crypto1_destroy(pcs);\r
	\r
	byte_t buf[4 + 4 * 4];\r
	memcpy(buf, &cuid, 4);\r
	memcpy(buf+4, &target_nt[0], 4);\r
	memcpy(buf+8, &target_ks[0], 4);\r
	memcpy(buf+12, &target_nt[1], 4);\r
	memcpy(buf+16, &target_ks[1], 4);\r
	\r
	LED_B_ON();\r
	cmd_send(CMD_ACK, 0, 2, targetBlockNo + (targetKeyType * 0x100), buf, sizeof(buf));\r
	LED_B_OFF();\r
\r
	if (MF_DBGLEVEL >= 3)	DbpString("NESTED FINISHED");\r
\r
	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
	LEDsoff();\r
	set_tracing(TRUE);\r
}\r
\r
//-----------------------------------------------------------------------------\r
// MIFARE check keys. key count up to 85. \r
// \r
//-----------------------------------------------------------------------------\r
void MifareChkKeys(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)\r
{\r
  // params\r
	uint8_t blockNo = arg0;\r
	uint8_t keyType = arg1;\r
	uint8_t keyCount = arg2;\r
	uint64_t ui64Key = 0;\r
	\r
	// variables\r
	int i;\r
	byte_t isOK = 0;\r
	uint8_t uid[10];\r
	uint32_t cuid;\r
	struct Crypto1State mpcs = {0, 0};\r
	struct Crypto1State *pcs;\r
	pcs = &mpcs;\r
	\r
	// clear debug level\r
	int OLD_MF_DBGLEVEL = MF_DBGLEVEL;	\r
	MF_DBGLEVEL = MF_DBG_NONE;\r
	\r
	// clear trace\r
	clear_trace();\r
	set_tracing(TRUE);\r
\r
	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
	LED_A_ON();\r
	LED_B_OFF();\r
	LED_C_OFF();\r
\r
	for (i = 0; i < keyCount; i++) {\r
		if(mifare_classic_halt(pcs, cuid)) {\r
			if (MF_DBGLEVEL >= 1)	Dbprintf("ChkKeys: Halt error");\r
		}\r
\r
		if(!iso14443a_select_card(uid, NULL, &cuid)) {\r
			if (OLD_MF_DBGLEVEL >= 1)	Dbprintf("ChkKeys: Can't select card");\r
			break;\r
		};\r
\r
		ui64Key = bytes_to_num(datain + i * 6, 6);\r
		if(mifare_classic_auth(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST)) {\r
			continue;\r
		};\r
		\r
		isOK = 1;\r
		break;\r
	}\r
	\r
	//  ----------------------------- crypto1 destroy\r
	crypto1_destroy(pcs);\r
	\r
	LED_B_ON();\r
    cmd_send(CMD_ACK,isOK,0,0,datain + i * 6,6);\r
	LED_B_OFF();\r
\r
	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
	LEDsoff();\r
\r
	// restore debug level\r
	MF_DBGLEVEL = OLD_MF_DBGLEVEL;	\r
}\r
\r
//-----------------------------------------------------------------------------\r
// MIFARE commands set debug level\r
// \r
//-----------------------------------------------------------------------------\r
void MifareSetDbgLvl(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){\r
	MF_DBGLEVEL = arg0;\r
	Dbprintf("Debug level: %d", MF_DBGLEVEL);\r
}\r
\r
//-----------------------------------------------------------------------------\r
// Work with emulator memory\r
// \r
//-----------------------------------------------------------------------------\r
void MifareEMemClr(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){\r
	emlClearMem();\r
}\r
\r
void MifareEMemSet(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){\r
	emlSetMem(datain, arg0, arg1); // data, block num, blocks count\r
}\r
\r
void MifareEMemGet(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){\r
	byte_t buf[USB_CMD_DATA_SIZE];\r
	emlGetMem(buf, arg0, arg1); // data, block num, blocks count (max 4)\r
\r
	LED_B_ON();\r
	cmd_send(CMD_ACK,arg0,arg1,0,buf,USB_CMD_DATA_SIZE);\r
	LED_B_OFF();\r
}\r
\r
//-----------------------------------------------------------------------------\r
// Load a card into the emulator memory\r
// \r
//-----------------------------------------------------------------------------\r
void MifareECardLoad(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){\r
	uint8_t numSectors = arg0;\r
	uint8_t keyType = arg1;\r
	uint64_t ui64Key = 0;\r
	uint32_t cuid;\r
	struct Crypto1State mpcs = {0, 0};\r
	struct Crypto1State *pcs;\r
	pcs = &mpcs;\r
\r
	// variables\r
	byte_t dataoutbuf[16];\r
	byte_t dataoutbuf2[16];\r
	uint8_t uid[10];\r
\r
	// clear trace\r
	clear_trace();\r
	set_tracing(false);\r
	\r
	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
	LED_A_ON();\r
	LED_B_OFF();\r
	LED_C_OFF();\r
	\r
	bool isOK = true;\r
\r
	if(!iso14443a_select_card(uid, NULL, &cuid)) {\r
		isOK = false;\r
		if (MF_DBGLEVEL >= 1)	Dbprintf("Can't select card");\r
	}\r
		\r
	for (uint8_t sectorNo = 0; isOK && sectorNo < numSectors; sectorNo++) {\r
		ui64Key = emlGetKey(sectorNo, keyType);\r
		if (sectorNo == 0){\r
			if(isOK && mifare_classic_auth(pcs, cuid, FirstBlockOfSector(sectorNo), keyType, ui64Key, AUTH_FIRST)) {\r
				isOK = false;\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("Sector[%2d]. Auth error", sectorNo);\r
				break;\r
			}\r
		} else {\r
			if(isOK && mifare_classic_auth(pcs, cuid, FirstBlockOfSector(sectorNo), keyType, ui64Key, AUTH_NESTED)) {\r
				isOK = false;\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("Sector[%2d]. Auth nested error", sectorNo);\r
				break;\r
			}\r
		}\r
		\r
		for (uint8_t blockNo = 0; isOK && blockNo < NumBlocksPerSector(sectorNo); blockNo++) {\r
			if(isOK && mifare_classic_readblock(pcs, cuid, FirstBlockOfSector(sectorNo) + blockNo, dataoutbuf)) {\r
				isOK = false;\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("Error reading sector %2d block %2d", sectorNo, blockNo);\r
				break;\r
			};\r
			if (isOK) {\r
				if (blockNo < NumBlocksPerSector(sectorNo) - 1) {\r
					emlSetMem(dataoutbuf, FirstBlockOfSector(sectorNo) + blockNo, 1);\r
				} else {	// sector trailer, keep the keys, set only the AC\r
					emlGetMem(dataoutbuf2, FirstBlockOfSector(sectorNo) + blockNo, 1);\r
					memcpy(&dataoutbuf2[6], &dataoutbuf[6], 4);\r
					emlSetMem(dataoutbuf2,  FirstBlockOfSector(sectorNo) + blockNo, 1);\r
				}\r
			}\r
		}\r
\r
	}\r
\r
	if(mifare_classic_halt(pcs, cuid)) {\r
		if (MF_DBGLEVEL >= 1)	Dbprintf("Halt error");\r
	};\r
\r
	//  ----------------------------- crypto1 destroy\r
	crypto1_destroy(pcs);\r
\r
	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
	LEDsoff();\r
	\r
	if (MF_DBGLEVEL >= 2) DbpString("EMUL FILL SECTORS FINISHED");\r
\r
}\r
\r
\r
//-----------------------------------------------------------------------------\r
// Work with "magic Chinese" card (email him: ouyangweidaxian@live.cn)\r
// \r
//-----------------------------------------------------------------------------\r
void MifareCSetBlock(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){\r
  \r
  // params\r
	uint8_t needWipe = arg0;\r
	// bit 0 - need get UID\r
	// bit 1 - need wupC\r
	// bit 2 - need HALT after sequence\r
	// bit 3 - need init FPGA and field before sequence\r
	// bit 4 - need reset FPGA and LED\r
	uint8_t workFlags = arg1;\r
	uint8_t blockNo = arg2;\r
	\r
	// card commands\r
	uint8_t wupC1[]       = { 0x40 }; \r
	uint8_t wupC2[]       = { 0x43 }; \r
	uint8_t wipeC[]       = { 0x41 }; \r
	\r
	// variables\r
	byte_t isOK = 0;\r
	uint8_t uid[10] = {0x00};\r
	uint8_t d_block[18] = {0x00};\r
	uint32_t cuid;\r
	\r
	uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE];\r
	uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE];\r
\r
	// reset FPGA and LED\r
	if (workFlags & 0x08) {\r
		LED_A_ON();\r
		LED_B_OFF();\r
		LED_C_OFF();\r
	\r
		clear_trace();\r
		set_tracing(TRUE);\r
		iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
	}\r
\r
	while (true) {\r
\r
		// get UID from chip\r
		if (workFlags & 0x01) {\r
			if(!iso14443a_select_card(uid, NULL, &cuid)) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("Can't select card");\r
				//break;\r
			};\r
\r
			if(mifare_classic_halt(NULL, cuid)) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("Halt error");\r
				//break;\r
			};\r
		};\r
	\r
		// reset chip\r
		if (needWipe){\r
			ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
			if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("wupC1 error");\r
				break;\r
			};\r
\r
			ReaderTransmit(wipeC, sizeof(wipeC), NULL);\r
			if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("wipeC error");\r
				break;\r
			};\r
\r
			if(mifare_classic_halt(NULL, cuid)) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("Halt error");\r
				break;\r
			};\r
		};	\r
\r
		// write block\r
		if (workFlags & 0x02) {\r
			ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
			if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("wupC1 error");\r
				break;\r
			};\r
\r
			ReaderTransmit(wupC2, sizeof(wupC2), NULL);\r
			if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("wupC2 error");\r
				break;\r
			};\r
		}\r
\r
		if ((mifare_sendcmd_short(NULL, 0, 0xA0, blockNo, receivedAnswer, receivedAnswerPar, NULL) != 1) || (receivedAnswer[0] != 0x0a)) {\r
			if (MF_DBGLEVEL >= 1)	Dbprintf("write block send command error");\r
			break;\r
		};\r
	\r
		memcpy(d_block, datain, 16);\r
		AppendCrc14443a(d_block, 16);\r
	\r
		ReaderTransmit(d_block, sizeof(d_block), NULL);\r
		if ((ReaderReceive(receivedAnswer, receivedAnswerPar) != 1) || (receivedAnswer[0] != 0x0a)) {\r
			if (MF_DBGLEVEL >= 1)	Dbprintf("write block send data error");\r
			break;\r
		};	\r
	\r
		if (workFlags & 0x04) {\r
			if (mifare_classic_halt(NULL, cuid)) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("Halt error");\r
				break;\r
			};\r
		}\r
		\r
		isOK = 1;\r
		break;\r
	}\r
	\r
	LED_B_ON();\r
	cmd_send(CMD_ACK,isOK,0,0,uid,4);\r
	LED_B_OFF();\r
\r
	if ((workFlags & 0x10) || (!isOK)) {\r
		FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
		LEDsoff();\r
	}\r
}\r
\r
\r
void MifareCGetBlock(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){\r
  \r
  // params\r
	// bit 1 - need wupC\r
	// bit 2 - need HALT after sequence\r
	// bit 3 - need init FPGA and field before sequence\r
	// bit 4 - need reset FPGA and LED\r
	uint8_t workFlags = arg0;\r
	uint8_t blockNo = arg2;\r
	\r
	// card commands\r
	uint8_t wupC1[]       = { 0x40 }; \r
	uint8_t wupC2[]       = { 0x43 }; \r
	\r
	// variables\r
	byte_t isOK = 0;\r
	uint8_t data[18] = {0x00};\r
	uint32_t cuid = 0;\r
	\r
	uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE];\r
	uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE];\r
	\r
	if (workFlags & 0x08) {\r
		LED_A_ON();\r
		LED_B_OFF();\r
		LED_C_OFF();\r
	\r
		clear_trace();\r
		set_tracing(TRUE);\r
		iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
	}\r
\r
	while (true) {\r
		if (workFlags & 0x02) {\r
			ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
			if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("wupC1 error");\r
				break;\r
			};\r
\r
			ReaderTransmit(wupC2, sizeof(wupC2), NULL);\r
			if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("wupC2 error");\r
				break;\r
			};\r
		}\r
\r
		// read block\r
		if ((mifare_sendcmd_short(NULL, 0, 0x30, blockNo, receivedAnswer, receivedAnswerPar, NULL) != 18)) {\r
			if (MF_DBGLEVEL >= 1)	Dbprintf("read block send command error");\r
			break;\r
		};\r
		memcpy(data, receivedAnswer, 18);\r
		\r
		if (workFlags & 0x04) {\r
			if (mifare_classic_halt(NULL, cuid)) {\r
				if (MF_DBGLEVEL >= 1)	Dbprintf("Halt error");\r
				break;\r
			};\r
		}\r
		\r
		isOK = 1;\r
		break;\r
	}\r
	\r
	LED_B_ON();\r
	cmd_send(CMD_ACK,isOK,0,0,data,18);\r
	LED_B_OFF();\r
\r
	if ((workFlags & 0x10) || (!isOK)) {\r
		FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
		LEDsoff();\r
	}\r
}\r
\r
void MifareCIdent(){\r
  \r
	// card commands\r
	uint8_t wupC1[]       = { 0x40 }; \r
	uint8_t wupC2[]       = { 0x43 }; \r
	\r
	// variables\r
	byte_t isOK = 1;\r
	\r
	uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE];\r
	uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE];\r
\r
	ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
	if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
		isOK = 0;\r
	};\r
\r
	ReaderTransmit(wupC2, sizeof(wupC2), NULL);\r
	if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
		isOK = 0;\r
	};\r
\r
	if (mifare_classic_halt(NULL, 0)) {\r
		isOK = 0;\r
	};\r
\r
	cmd_send(CMD_ACK,isOK,0,0,0,0);\r
}\r
\r
			//\r
// DESFIRE\r
//\r
\r
void Mifare_DES_Auth1(uint8_t arg0, uint8_t *datain){\r
\r
	byte_t dataout[11] = {0x00};\r
	uint8_t uid[10] = {0x00};\r
	uint32_t cuid = 0x00;\r
    \r
	clear_trace();\r
	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
	int len = iso14443a_select_card(uid, NULL, &cuid);\r
	if(!len) {\r
		if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card");\r
		OnError(1);\r
		return;\r
	};\r
\r
	if(mifare_desfire_des_auth1(cuid, dataout)){\r
		if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Authentication part1: Fail.");\r
		OnError(4);\r
		return;\r
	}\r
\r
	if (MF_DBGLEVEL >= MF_DBG_EXTENDED) DbpString("AUTH 1 FINISHED");\r
    cmd_send(CMD_ACK,1,cuid,0,dataout, sizeof(dataout));\r
}\r
\r
void Mifare_DES_Auth2(uint32_t arg0, uint8_t *datain){\r
\r
	uint32_t cuid = arg0;\r
	uint8_t key[16] = {0x00};\r
	byte_t dataout[12] = {0x00};\r
	byte_t isOK = 0;\r
    \r
	memcpy(key, datain, 16);\r
	\r
	isOK = mifare_desfire_des_auth2(cuid, key, dataout);\r
	\r
	if( isOK) {\r
	    if (MF_DBGLEVEL >= MF_DBG_EXTENDED) Dbprintf("Authentication part2: Failed");  \r
		OnError(4);\r
		return;\r
	}\r
\r
	if (MF_DBGLEVEL >= MF_DBG_EXTENDED) DbpString("AUTH 2 FINISHED");\r
\r
	cmd_send(CMD_ACK, isOK, 0, 0, dataout, sizeof(dataout));\r
	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
	LEDsoff();\r
}\r