]> cvs.zerfleddert.de Git - proxmark3-svn/blame - include/proxmark3.h
Jerry-rig a simply hysteresis based receiver into hi_read_tx. Output is via SSC_DIN...
[proxmark3-svn] / include / proxmark3.h
CommitLineData
6658905f 1//-----------------------------------------------------------------------------\r
2// Definitions of interest to most of the software for this project.\r
3// Jonathan Westhues, Mar 2006\r
4//-----------------------------------------------------------------------------\r
5\r
6#ifndef __PROXMARK3_H\r
7#define __PROXMARK3_H\r
8\r
9// Might as well have the hardware-specific defines everywhere.\r
6949aca9 10#include <at91sam7s512.h>\r
6658905f 11#include <config_gpio.h>\r
6949aca9 12\r
13#define WDT_HIT() AT91C_BASE_WDTC->WDTC_WDCR = 0xa5000001\r
14\r
15#define PWM_CH_MODE_PRESCALER(x) ((x)<<0)\r
16#define PWM_CHANNEL(x) (1<<(x))\r
17\r
18#define TC_CMR_TCCLKS_TIMER_CLOCK1 (0<<0)\r
bb4d2cca 19#define TC_CMR_TCCLKS_TIMER_CLOCK2 (1<<0)\r
20#define TC_CMR_TCCLKS_TIMER_CLOCK3 (2<<0)\r
21#define TC_CMR_TCCLKS_TIMER_CLOCK4 (3<<0)\r
22#define TC_CMR_TCCLKS_TIMER_CLOCK5 (4<<0)\r
6949aca9 23\r
24#define ADC_CHAN_LF 4\r
25#define ADC_CHAN_HF 5\r
26#define ADC_MODE_PRESCALE(x) ((x)<<8)\r
27#define ADC_MODE_STARTUP_TIME(x) ((x)<<16)\r
28#define ADC_MODE_SAMPLE_HOLD_TIME(x) ((x)<<24)\r
29#define ADC_CHANNEL(x) (1<<(x))\r
30#define ADC_END_OF_CONVERSION(x) (1<<(x))\r
31\r
32#define SSC_CLOCK_MODE_START(x) ((x)<<8)\r
33#define SSC_FRAME_MODE_WORDS_PER_TRANSFER(x) ((x)<<8)\r
34#define SSC_CLOCK_MODE_SELECT(x) ((x)<<0)\r
35#define SSC_FRAME_MODE_BITS_IN_WORD(x) (((x)-1)<<0)\r
36\r
37#define MC_FLASH_COMMAND_KEY ((0x5a)<<24)\r
38#define MC_FLASH_STATUS_READY (1<<0)\r
39#define MC_FLASH_MODE_FLASH_WAIT_STATES(x) ((x)<<8)\r
40#define MC_FLASH_MODE_MASTER_CLK_IN_MHZ(x) ((x)<<16)\r
41#define MC_FLASH_COMMAND_PAGEN(x) ((x)<<8)\r
42\r
43#define RST_CONTROL_KEY (0xa5<<24)\r
44\r
45#define PMC_MAIN_OSC_ENABLE (1<<0)\r
46#define PMC_MAIN_OSC_STABILIZED (1<<0)\r
47#define PMC_MAIN_OSC_PLL_LOCK (1<<2)\r
48#define PMC_MAIN_OSC_MCK_READY (1<<3)\r
49\r
50#define PMC_MAIN_OSC_STARTUP_DELAY(x) ((x)<<8)\r
51#define PMC_PLL_DIVISOR(x) (x)\r
52#define PMC_CLK_PRESCALE_DIV_2 (1<<2)\r
53#define PMC_PLL_MULTIPLIER(x) (((x)-1)<<16)\r
54#define PMC_PLL_COUNT_BEFORE_LOCK(x) ((x)<<8)\r
55#define PMC_PLL_FREQUENCY_RANGE(x) ((x)<<14)\r
56#define PMC_PLL_USB_DIVISOR(x) ((x)<<28)\r
57\r
58#define UDP_INTERRUPT_ENDPOINT(x) (1<<(x))\r
59#define UDP_CSR_BYTES_RECEIVED(x) (((x) >> 16) & 0x7ff)\r
60//**************************************************************\r
61\r
62#define LOW(x) AT91C_BASE_PIOA->PIO_CODR = (x)\r
63#define HIGH(x) AT91C_BASE_PIOA->PIO_SODR = (x)\r
6658905f 64\r
65#define SPI_FPGA_MODE 0\r
66#define SPI_LCD_MODE 1\r
67\r
68typedef unsigned long DWORD;\r
69typedef signed long SDWORD;\r
70typedef unsigned long long QWORD;\r
71typedef int BOOL;\r
72typedef unsigned char BYTE;\r
73typedef signed char SBYTE;\r
74typedef unsigned short WORD;\r
75typedef signed short SWORD;\r
76#define TRUE 1\r
77#define FALSE 0\r
78\r
79#include <usb_cmd.h>\r
80\r
81#define PACKED __attribute__((__packed__))\r
82\r
83#define USB_D_PLUS_PULLUP_ON() { \\r
6949aca9 84 HIGH(GPIO_USB_PU); \\r
85 AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU; \\r
6658905f 86 }\r
6949aca9 87#define USB_D_PLUS_PULLUP_OFF() AT91C_BASE_PIOA->PIO_ODR = GPIO_USB_PU\r
88\r
89#define LED_A_ON() HIGH(GPIO_LED_A)\r
90#define LED_A_OFF() LOW(GPIO_LED_A)\r
91#define LED_B_ON() HIGH(GPIO_LED_B)\r
92#define LED_B_OFF() LOW(GPIO_LED_B)\r
93#define LED_C_ON() HIGH(GPIO_LED_C)\r
94#define LED_C_OFF() LOW(GPIO_LED_C)\r
95#define LED_D_ON() HIGH(GPIO_LED_D)\r
96#define LED_D_OFF() LOW(GPIO_LED_D)\r
97#define RELAY_ON() HIGH(GPIO_RELAY)\r
98#define RELAY_OFF() LOW(GPIO_RELAY)\r
99#define BUTTON_PRESS() !(AT91C_BASE_PIOA->PIO_PDSR & GPIO_BUTTON)\r
6658905f 100//--------------------------------\r
101// USB declarations\r
102\r
103void UsbSendPacket(BYTE *packet, int len);\r
50722269 104BOOL UsbConnected();\r
6658905f 105BOOL UsbPoll(BOOL blinkLeds);\r
106void UsbStart(void);\r
107\r
108// This function is provided by the apps/bootrom, and called from UsbPoll\r
109// if data are available.\r
110void UsbPacketReceived(BYTE *packet, int len);\r
111\r
8a6aec16 112#define VERSION_INFORMATION_MAGIC 0x56334d50\r
113struct version_information {\r
6949aca9 114 int magic; /* Magic sequence to identify this as a correct version information structure. Must be VERSION_INFORMATION_MAGIC */\r
8a6aec16 115 char versionversion; /* Must be 1 */\r
116 char present; /* 1 if the version information could be created at compile time, otherwise 0 and the remaining fields (except for magic) are empty */\r
117 char clean; /* 1: Tree was clean, no local changes. 0: Tree was unclean. 2: Couldn't be determined */\r
118 char svnversion[9]; /* String with the SVN revision */\r
119 char buildtime[30]; /* string with the build time */\r
120} __attribute__((packed));\r
121\r
8fcbf652 122#define COMMON_AREA_MAGIC 0x43334d50\r
123#define COMMON_AREA_COMMAND_NONE 0\r
124#define COMMON_AREA_COMMAND_ENTER_FLASH_MODE 1\r
125struct common_area {\r
126 int magic; /* Magic sequence, to distinguish against random uninitialized memory */\r
127 char version; /* Must be 1 */\r
128 char command;\r
129 struct {\r
130 unsigned int bootrom_present:1; /* Set when a bootrom that is capable of parsing the common area is present */\r
131 unsigned int osimage_present:1; /* Set when a osimage that is capable of parsing the common area is present */\r
132 } __attribute__((packed)) flags;\r
133 int arg1, arg2;\r
134} __attribute__((packed));\r
135\r
6658905f 136#endif\r
Impressum, Datenschutz