]>
Commit | Line | Data |
---|---|---|
959baa89 | 1 | //----------------------------------------------------------------------------- |
2 | // The main application code. This is the first thing called after start.c | |
3 | // executes. | |
4 | // Jonathan Westhues, Mar 2006 | |
5 | // Edits by Gerhard de Koning Gans, Sep 2007 (##) | |
6 | //----------------------------------------------------------------------------- | |
7 | ||
8 | ||
9 | #include <proxmark3.h> | |
7f348042 | 10 | #include <stdlib.h> |
959baa89 | 11 | #include "apps.h" |
12 | #ifdef WITH_LCD | |
13 | #include "fonts.h" | |
14 | #include "LCD.h" | |
15 | #endif | |
16 | ||
17 | // The large multi-purpose buffer, typically used to hold A/D samples, | |
18 | // maybe pre-processed in some way. | |
19 | DWORD BigBuf[16000]; | |
955fc5e2 | 20 | int usbattached = 0; |
959baa89 | 21 | |
22 | //============================================================================= | |
23 | // A buffer where we can queue things up to be sent through the FPGA, for | |
24 | // any purpose (fake tag, as reader, whatever). We go MSB first, since that | |
25 | // is the order in which they go out on the wire. | |
26 | //============================================================================= | |
27 | ||
28 | BYTE ToSend[256]; | |
29 | int ToSendMax; | |
30 | static int ToSendBit; | |
31 | ||
f23e056d | 32 | |
33 | void BufferClear(void) | |
34 | { | |
35 | memset(BigBuf,0,sizeof(BigBuf)); | |
36 | DbpString("Buffer cleared"); | |
37 | } | |
38 | ||
959baa89 | 39 | void ToSendReset(void) |
40 | { | |
41 | ToSendMax = -1; | |
42 | ToSendBit = 8; | |
43 | } | |
44 | ||
45 | void ToSendStuffBit(int b) | |
46 | { | |
47 | if(ToSendBit >= 8) { | |
48 | ToSendMax++; | |
49 | ToSend[ToSendMax] = 0; | |
50 | ToSendBit = 0; | |
51 | } | |
52 | ||
53 | if(b) { | |
54 | ToSend[ToSendMax] |= (1 << (7 - ToSendBit)); | |
55 | } | |
56 | ||
57 | ToSendBit++; | |
58 | ||
59 | if(ToSendBit >= sizeof(ToSend)) { | |
60 | ToSendBit = 0; | |
61 | DbpString("ToSendStuffBit overflowed!"); | |
62 | } | |
63 | } | |
64 | ||
65 | //============================================================================= | |
66 | // Debug print functions, to go out over USB, to the usual PC-side client. | |
67 | //============================================================================= | |
68 | ||
69 | void DbpString(char *str) | |
70 | { | |
955fc5e2 | 71 | /* this holds up stuff unless we're connected to usb */ |
1dff8c42 | 72 | // if (!usbattached) |
73 | // return; | |
c701d2c2 | 74 | |
959baa89 | 75 | UsbCommand c; |
76 | c.cmd = CMD_DEBUG_PRINT_STRING; | |
77 | c.ext1 = strlen(str); | |
78 | memcpy(c.d.asBytes, str, c.ext1); | |
79 | ||
80 | UsbSendPacket((BYTE *)&c, sizeof(c)); | |
81 | // TODO fix USB so stupid things like this aren't req'd | |
82 | SpinDelay(50); | |
83 | } | |
84 | ||
85 | void DbpIntegers(int x1, int x2, int x3) | |
86 | { | |
955fc5e2 | 87 | /* this holds up stuff unless we're connected to usb */ |
1dff8c42 | 88 | // if (!usbattached) |
89 | // return; | |
955fc5e2 | 90 | |
959baa89 | 91 | UsbCommand c; |
92 | c.cmd = CMD_DEBUG_PRINT_INTEGERS; | |
93 | c.ext1 = x1; | |
94 | c.ext2 = x2; | |
95 | c.ext3 = x3; | |
96 | ||
97 | UsbSendPacket((BYTE *)&c, sizeof(c)); | |
98 | // XXX | |
99 | SpinDelay(50); | |
100 | } | |
101 | ||
102 | void AcquireRawAdcSamples125k(BOOL at134khz) | |
103 | { | |
104 | if(at134khz) { | |
105 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz | |
c701d2c2 | 106 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); |
959baa89 | 107 | } else { |
108 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz | |
c701d2c2 | 109 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); |
959baa89 | 110 | } |
111 | ||
112 | // Connect the A/D to the peak-detected low-frequency path. | |
113 | SetAdcMuxFor(GPIO_MUXSEL_LOPKD); | |
114 | ||
115 | // Give it a bit of time for the resonant antenna to settle. | |
116 | SpinDelay(50); | |
117 | ||
118 | // Now set up the SSC to get the ADC samples that are now streaming at us. | |
119 | FpgaSetupSsc(); | |
120 | ||
121 | // Now call the acquisition routine | |
122 | DoAcquisition125k(at134khz); | |
123 | } | |
124 | ||
125 | // split into two routines so we can avoid timing issues after sending commands // | |
126 | void DoAcquisition125k(BOOL at134khz) | |
127 | { | |
128 | BYTE *dest = (BYTE *)BigBuf; | |
129 | int n = sizeof(BigBuf); | |
130 | int i; | |
131 | ||
132 | memset(dest,0,n); | |
133 | i = 0; | |
134 | for(;;) { | |
135 | if(SSC_STATUS & (SSC_STATUS_TX_READY)) { | |
136 | SSC_TRANSMIT_HOLDING = 0x43; | |
137 | LED_D_ON(); | |
138 | } | |
139 | if(SSC_STATUS & (SSC_STATUS_RX_READY)) { | |
140 | dest[i] = (BYTE)SSC_RECEIVE_HOLDING; | |
141 | i++; | |
142 | LED_D_OFF(); | |
143 | if(i >= n) { | |
144 | break; | |
145 | } | |
146 | } | |
147 | } | |
148 | DbpIntegers(dest[0], dest[1], at134khz); | |
149 | } | |
150 | ||
151 | void ModThenAcquireRawAdcSamples125k(int delay_off,int period_0,int period_1,BYTE *command) | |
152 | { | |
153 | BOOL at134khz; | |
154 | ||
155 | // see if 'h' was specified | |
1dd23352 | 156 | if(command[strlen((char *) command) - 1] == 'h') |
959baa89 | 157 | at134khz= TRUE; |
158 | else | |
159 | at134khz= FALSE; | |
c701d2c2 | 160 | |
959baa89 | 161 | if(at134khz) { |
162 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz | |
c701d2c2 | 163 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); |
959baa89 | 164 | } else { |
165 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz | |
c701d2c2 | 166 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); |
959baa89 | 167 | } |
168 | ||
169 | // Give it a bit of time for the resonant antenna to settle. | |
170 | SpinDelay(50); | |
171 | ||
172 | // Now set up the SSC to get the ADC samples that are now streaming at us. | |
173 | FpgaSetupSsc(); | |
174 | ||
175 | // now modulate the reader field | |
176 | while(*command != '\0' && *command != ' ') | |
177 | { | |
178 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); | |
179 | LED_D_OFF(); | |
180 | SpinDelayUs(delay_off); | |
181 | if(at134khz) { | |
182 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz | |
c701d2c2 | 183 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); |
959baa89 | 184 | } else { |
185 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz | |
c701d2c2 | 186 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); |
959baa89 | 187 | } |
188 | LED_D_ON(); | |
189 | if(*(command++) == '0') | |
190 | SpinDelayUs(period_0); | |
191 | else | |
192 | SpinDelayUs(period_1); | |
193 | } | |
194 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); | |
195 | LED_D_OFF(); | |
196 | SpinDelayUs(delay_off); | |
197 | if(at134khz) { | |
198 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz | |
c701d2c2 | 199 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); |
959baa89 | 200 | } else { |
201 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz | |
c701d2c2 | 202 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); |
959baa89 | 203 | } |
204 | ||
205 | // now do the read | |
206 | DoAcquisition125k(at134khz); | |
207 | } | |
208 | ||
c701d2c2 | 209 | //----------------------------------------------------------------------------- |
210 | // Read a TI-type tag. We assume that the tag has already been illuminated, | |
211 | // and that the exciting signal has been turned off. That means that we just | |
212 | // acquire the `one-bit DAC' bits from the comparator. | |
213 | //----------------------------------------------------------------------------- | |
214 | void AcquireTiType(void) | |
215 | { | |
216 | int i; | |
217 | int n = 4000; | |
218 | ||
219 | // clear buffer | |
220 | memset(BigBuf,0,sizeof(BigBuf)); | |
221 | ||
222 | // Set up the synchronous serial port | |
223 | PIO_DISABLE = (1<<GPIO_SSC_DIN); | |
224 | PIO_PERIPHERAL_A_SEL = (1<<GPIO_SSC_DIN); | |
225 | ||
226 | SSC_CONTROL = SSC_CONTROL_RESET; | |
227 | SSC_CONTROL = SSC_CONTROL_RX_ENABLE | SSC_CONTROL_TX_ENABLE; | |
228 | ||
229 | // Sample at 2 Mbit/s, so TI tags are 16.2 vs. 14.9 clocks long | |
230 | // 48/2 = 24 MHz clock must be divided by 12 | |
231 | SSC_CLOCK_DIVISOR = 12; | |
232 | ||
233 | SSC_RECEIVE_CLOCK_MODE = SSC_CLOCK_MODE_SELECT(0); | |
234 | SSC_RECEIVE_FRAME_MODE = SSC_FRAME_MODE_BITS_IN_WORD(32) | SSC_FRAME_MODE_MSB_FIRST; | |
235 | SSC_TRANSMIT_CLOCK_MODE = 0; | |
236 | SSC_TRANSMIT_FRAME_MODE = 0; | |
237 | ||
238 | i = 0; | |
239 | for(;;) { | |
240 | if(SSC_STATUS & SSC_STATUS_RX_READY) { | |
241 | BigBuf[i] = SSC_RECEIVE_HOLDING; // store 32 bit values in buffer | |
242 | i++; if(i >= n) return; | |
243 | } | |
244 | WDT_HIT(); | |
245 | } | |
246 | } | |
247 | ||
248 | void AcquireRawBitsTI(void) | |
249 | { | |
250 | LED_D_ON(); | |
251 | // TI tags charge at 134.2Khz | |
252 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz | |
253 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); | |
254 | ||
255 | // Charge TI tag for 50ms. | |
256 | SpinDelay(50); | |
257 | LED_D_OFF(); | |
258 | ||
259 | LED_A_ON(); | |
260 | // Place FPGA in passthrough mode so as to stop driving the LF coil, | |
261 | // in this mode the CROSS_LO line connects to SSP_DIN | |
262 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU); | |
263 | ||
264 | // get TI tag data into the buffer | |
265 | AcquireTiType(); | |
266 | ||
267 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); | |
268 | LED_A_OFF(); | |
269 | } | |
270 | ||
959baa89 | 271 | //----------------------------------------------------------------------------- |
272 | // Read an ADC channel and block till it completes, then return the result | |
273 | // in ADC units (0 to 1023). Also a routine to average 32 samples and | |
274 | // return that. | |
275 | //----------------------------------------------------------------------------- | |
276 | static int ReadAdc(int ch) | |
277 | { | |
278 | DWORD d; | |
279 | ||
280 | ADC_CONTROL = ADC_CONTROL_RESET; | |
281 | ADC_MODE = ADC_MODE_PRESCALE(32) | ADC_MODE_STARTUP_TIME(16) | | |
282 | ADC_MODE_SAMPLE_HOLD_TIME(8); | |
283 | ADC_CHANNEL_ENABLE = ADC_CHANNEL(ch); | |
284 | ||
285 | ADC_CONTROL = ADC_CONTROL_START; | |
286 | while(!(ADC_STATUS & ADC_END_OF_CONVERSION(ch))) | |
287 | ; | |
288 | d = ADC_CHANNEL_DATA(ch); | |
289 | ||
290 | return d; | |
291 | } | |
292 | ||
293 | static int AvgAdc(int ch) | |
294 | { | |
295 | int i; | |
296 | int a = 0; | |
297 | ||
298 | for(i = 0; i < 32; i++) { | |
299 | a += ReadAdc(ch); | |
300 | } | |
301 | ||
302 | return (a + 15) >> 5; | |
303 | } | |
30f2a7d3 | 304 | |
e7aee94e | 305 | void MeasureAntennaTuning(void) |
959baa89 | 306 | { |
307 | BYTE *dest = (BYTE *)BigBuf; | |
e7aee94e | 308 | int i, ptr = 0, adcval = 0, peak = 0, peakv = 0, peakf = 0;; |
309 | int vLf125 = 0, vLf134 = 0, vHf = 0; // in mV | |
310 | ||
311 | UsbCommand c; | |
959baa89 | 312 | |
e7aee94e | 313 | DbpString("Measuring antenna characteristics, please wait."); |
959baa89 | 314 | memset(BigBuf,0,sizeof(BigBuf)); |
315 | ||
e7aee94e | 316 | /* |
317 | * Sweeps the useful LF range of the proxmark from | |
318 | * 46.8kHz (divisor=255) to 600kHz (divisor=19) and | |
319 | * read the voltage in the antenna, the result left | |
320 | * in the buffer is a graph which should clearly show | |
321 | * the resonating frequency of your LF antenna | |
322 | * ( hopefully around 95 if it is tuned to 125kHz!) | |
323 | */ | |
959baa89 | 324 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); |
325 | for (i=255; i>19; i--) { | |
326 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i); | |
327 | SpinDelay(20); | |
e7aee94e | 328 | // Vref = 3.3V, and a 10000:240 voltage divider on the input |
329 | // can measure voltages up to 137500 mV | |
330 | adcval = ((137500 * AvgAdc(ADC_CHAN_LF)) >> 10); | |
331 | if (i==95) vLf125 = adcval; // voltage at 125Khz | |
332 | if (i==89) vLf134 = adcval; // voltage at 134Khz | |
333 | ||
334 | dest[i] = adcval>>8; // scale int to fit in byte for graphing purposes | |
38b65694 | 335 | if(dest[i] > peak) { |
e7aee94e | 336 | peakv = adcval; |
337 | peak = dest[i]; | |
338 | peakf = i; | |
339 | ptr = i; | |
38b65694 | 340 | } |
e7aee94e | 341 | } |
959baa89 | 342 | |
343 | // Let the FPGA drive the high-frequency antenna around 13.56 MHz. | |
344 | FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR); | |
345 | SpinDelay(20); | |
959baa89 | 346 | // Vref = 3300mV, and an 10:1 voltage divider on the input |
347 | // can measure voltages up to 33000 mV | |
e7aee94e | 348 | vHf = (33000 * AvgAdc(ADC_CHAN_HF)) >> 10; |
959baa89 | 349 | |
350 | c.cmd = CMD_MEASURED_ANTENNA_TUNING; | |
351 | c.ext1 = (vLf125 << 0) | (vLf134 << 16); | |
352 | c.ext2 = vHf; | |
c701d2c2 | 353 | c.ext3 = peakf | (peakv << 16); |
959baa89 | 354 | UsbSendPacket((BYTE *)&c, sizeof(c)); |
355 | } | |
356 | ||
955fc5e2 | 357 | void SimulateTagLowFrequency(int period, int ledcontrol) |
959baa89 | 358 | { |
359 | int i; | |
360 | BYTE *tab = (BYTE *)BigBuf; | |
361 | ||
362 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_SIMULATOR); | |
363 | ||
364 | PIO_ENABLE = (1 << GPIO_SSC_DOUT) | (1 << GPIO_SSC_CLK); | |
365 | ||
366 | PIO_OUTPUT_ENABLE = (1 << GPIO_SSC_DOUT); | |
367 | PIO_OUTPUT_DISABLE = (1 << GPIO_SSC_CLK); | |
368 | ||
369 | #define SHORT_COIL() LOW(GPIO_SSC_DOUT) | |
370 | #define OPEN_COIL() HIGH(GPIO_SSC_DOUT) | |
371 | ||
372 | i = 0; | |
373 | for(;;) { | |
374 | while(!(PIO_PIN_DATA_STATUS & (1<<GPIO_SSC_CLK))) { | |
375 | if(BUTTON_PRESS()) { | |
6bd86cb2 | 376 | DbpString("Stopped"); |
959baa89 | 377 | return; |
378 | } | |
379 | WDT_HIT(); | |
380 | } | |
381 | ||
955fc5e2 | 382 | if (ledcontrol) |
383 | LED_D_ON(); | |
384 | ||
385 | if(tab[i]) | |
959baa89 | 386 | OPEN_COIL(); |
955fc5e2 | 387 | else |
959baa89 | 388 | SHORT_COIL(); |
c701d2c2 | 389 | |
955fc5e2 | 390 | if (ledcontrol) |
391 | LED_D_OFF(); | |
959baa89 | 392 | |
393 | while(PIO_PIN_DATA_STATUS & (1<<GPIO_SSC_CLK)) { | |
394 | if(BUTTON_PRESS()) { | |
6bd86cb2 | 395 | DbpString("Stopped"); |
959baa89 | 396 | return; |
397 | } | |
398 | WDT_HIT(); | |
399 | } | |
400 | ||
401 | i++; | |
402 | if(i == period) i = 0; | |
403 | } | |
404 | } | |
405 | ||
406 | // compose fc/8 fc/10 waveform | |
407 | static void fc(int c, int *n) { | |
408 | BYTE *dest = (BYTE *)BigBuf; | |
409 | int idx; | |
410 | ||
411 | // for when we want an fc8 pattern every 4 logical bits | |
412 | if(c==0) { | |
413 | dest[((*n)++)]=1; | |
414 | dest[((*n)++)]=1; | |
415 | dest[((*n)++)]=0; | |
416 | dest[((*n)++)]=0; | |
417 | dest[((*n)++)]=0; | |
418 | dest[((*n)++)]=0; | |
419 | dest[((*n)++)]=0; | |
420 | dest[((*n)++)]=0; | |
421 | } | |
422 | // an fc/8 encoded bit is a bit pattern of 11000000 x6 = 48 samples | |
423 | if(c==8) { | |
424 | for (idx=0; idx<6; idx++) { | |
425 | dest[((*n)++)]=1; | |
426 | dest[((*n)++)]=1; | |
427 | dest[((*n)++)]=0; | |
428 | dest[((*n)++)]=0; | |
429 | dest[((*n)++)]=0; | |
430 | dest[((*n)++)]=0; | |
431 | dest[((*n)++)]=0; | |
432 | dest[((*n)++)]=0; | |
433 | } | |
434 | } | |
435 | ||
436 | // an fc/10 encoded bit is a bit pattern of 1110000000 x5 = 50 samples | |
437 | if(c==10) { | |
438 | for (idx=0; idx<5; idx++) { | |
439 | dest[((*n)++)]=1; | |
440 | dest[((*n)++)]=1; | |
441 | dest[((*n)++)]=1; | |
442 | dest[((*n)++)]=0; | |
443 | dest[((*n)++)]=0; | |
444 | dest[((*n)++)]=0; | |
445 | dest[((*n)++)]=0; | |
446 | dest[((*n)++)]=0; | |
447 | dest[((*n)++)]=0; | |
448 | dest[((*n)++)]=0; | |
449 | } | |
450 | } | |
451 | } | |
452 | ||
453 | // prepare a waveform pattern in the buffer based on the ID given then | |
454 | // simulate a HID tag until the button is pressed | |
955fc5e2 | 455 | static void CmdHIDsimTAG(int hi, int lo, int ledcontrol) |
959baa89 | 456 | { |
457 | int n=0, i=0; | |
458 | /* | |
459 | HID tag bitstream format | |
460 | The tag contains a 44bit unique code. This is sent out MSB first in sets of 4 bits | |
461 | A 1 bit is represented as 6 fc8 and 5 fc10 patterns | |
462 | A 0 bit is represented as 5 fc10 and 6 fc8 patterns | |
463 | A fc8 is inserted before every 4 bits | |
464 | A special start of frame pattern is used consisting a0b0 where a and b are neither 0 | |
465 | nor 1 bits, they are special patterns (a = set of 12 fc8 and b = set of 10 fc10) | |
466 | */ | |
467 | ||
468 | if (hi>0xFFF) { | |
469 | DbpString("Tags can only have 44 bits."); | |
470 | return; | |
471 | } | |
472 | fc(0,&n); | |
473 | // special start of frame marker containing invalid bit sequences | |
474 | fc(8, &n); fc(8, &n); // invalid | |
475 | fc(8, &n); fc(10, &n); // logical 0 | |
476 | fc(10, &n); fc(10, &n); // invalid | |
477 | fc(8, &n); fc(10, &n); // logical 0 | |
478 | ||
479 | WDT_HIT(); | |
480 | // manchester encode bits 43 to 32 | |
481 | for (i=11; i>=0; i--) { | |
482 | if ((i%4)==3) fc(0,&n); | |
483 | if ((hi>>i)&1) { | |
484 | fc(10, &n); fc(8, &n); // low-high transition | |
485 | } else { | |
486 | fc(8, &n); fc(10, &n); // high-low transition | |
487 | } | |
488 | } | |
489 | ||
490 | WDT_HIT(); | |
491 | // manchester encode bits 31 to 0 | |
492 | for (i=31; i>=0; i--) { | |
493 | if ((i%4)==3) fc(0,&n); | |
494 | if ((lo>>i)&1) { | |
495 | fc(10, &n); fc(8, &n); // low-high transition | |
496 | } else { | |
497 | fc(8, &n); fc(10, &n); // high-low transition | |
498 | } | |
499 | } | |
500 | ||
955fc5e2 | 501 | if (ledcontrol) |
502 | LED_A_ON(); | |
503 | SimulateTagLowFrequency(n, ledcontrol); | |
c701d2c2 | 504 | |
955fc5e2 | 505 | if (ledcontrol) |
506 | LED_A_OFF(); | |
959baa89 | 507 | } |
508 | ||
509 | // loop to capture raw HID waveform then FSK demodulate the TAG ID from it | |
955fc5e2 | 510 | static void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol) |
959baa89 | 511 | { |
512 | BYTE *dest = (BYTE *)BigBuf; | |
513 | int m=0, n=0, i=0, idx=0, found=0, lastval=0; | |
514 | DWORD hi=0, lo=0; | |
515 | ||
516 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz | |
c701d2c2 | 517 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); |
959baa89 | 518 | |
519 | // Connect the A/D to the peak-detected low-frequency path. | |
520 | SetAdcMuxFor(GPIO_MUXSEL_LOPKD); | |
521 | ||
522 | // Give it a bit of time for the resonant antenna to settle. | |
523 | SpinDelay(50); | |
524 | ||
525 | // Now set up the SSC to get the ADC samples that are now streaming at us. | |
526 | FpgaSetupSsc(); | |
527 | ||
528 | for(;;) { | |
529 | WDT_HIT(); | |
955fc5e2 | 530 | if (ledcontrol) |
531 | LED_A_ON(); | |
959baa89 | 532 | if(BUTTON_PRESS()) { |
6bd86cb2 | 533 | DbpString("Stopped"); |
955fc5e2 | 534 | if (ledcontrol) |
535 | LED_A_OFF(); | |
959baa89 | 536 | return; |
537 | } | |
538 | ||
539 | i = 0; | |
540 | m = sizeof(BigBuf); | |
541 | memset(dest,128,m); | |
542 | for(;;) { | |
543 | if(SSC_STATUS & (SSC_STATUS_TX_READY)) { | |
544 | SSC_TRANSMIT_HOLDING = 0x43; | |
955fc5e2 | 545 | if (ledcontrol) |
546 | LED_D_ON(); | |
959baa89 | 547 | } |
548 | if(SSC_STATUS & (SSC_STATUS_RX_READY)) { | |
549 | dest[i] = (BYTE)SSC_RECEIVE_HOLDING; | |
550 | // we don't care about actual value, only if it's more or less than a | |
551 | // threshold essentially we capture zero crossings for later analysis | |
552 | if(dest[i] < 127) dest[i] = 0; else dest[i] = 1; | |
553 | i++; | |
955fc5e2 | 554 | if (ledcontrol) |
555 | LED_D_OFF(); | |
959baa89 | 556 | if(i >= m) { |
557 | break; | |
558 | } | |
559 | } | |
560 | } | |
561 | ||
562 | // FSK demodulator | |
563 | ||
564 | // sync to first lo-hi transition | |
565 | for( idx=1; idx<m; idx++) { | |
566 | if (dest[idx-1]<dest[idx]) | |
567 | lastval=idx; | |
568 | break; | |
569 | } | |
570 | WDT_HIT(); | |
571 | ||
572 | // count cycles between consecutive lo-hi transitions, there should be either 8 (fc/8) | |
573 | // or 10 (fc/10) cycles but in practice due to noise etc we may end up with with anywhere | |
574 | // between 7 to 11 cycles so fuzz it by treat anything <9 as 8 and anything else as 10 | |
575 | for( i=0; idx<m; idx++) { | |
576 | if (dest[idx-1]<dest[idx]) { | |
577 | dest[i]=idx-lastval; | |
578 | if (dest[i] <= 8) { | |
579 | dest[i]=1; | |
580 | } else { | |
581 | dest[i]=0; | |
582 | } | |
583 | ||
584 | lastval=idx; | |
585 | i++; | |
586 | } | |
587 | } | |
588 | m=i; | |
589 | WDT_HIT(); | |
590 | ||
591 | // we now have a set of cycle counts, loop over previous results and aggregate data into bit patterns | |
592 | lastval=dest[0]; | |
593 | idx=0; | |
594 | i=0; | |
595 | n=0; | |
596 | for( idx=0; idx<m; idx++) { | |
597 | if (dest[idx]==lastval) { | |
598 | n++; | |
599 | } else { | |
600 | // a bit time is five fc/10 or six fc/8 cycles so figure out how many bits a pattern width represents, | |
601 | // an extra fc/8 pattern preceeds every 4 bits (about 200 cycles) just to complicate things but it gets | |
602 | // swallowed up by rounding | |
603 | // expected results are 1 or 2 bits, any more and it's an invalid manchester encoding | |
604 | // special start of frame markers use invalid manchester states (no transitions) by using sequences | |
605 | // like 111000 | |
606 | if (dest[idx-1]) { | |
607 | n=(n+1)/6; // fc/8 in sets of 6 | |
608 | } else { | |
609 | n=(n+1)/5; // fc/10 in sets of 5 | |
610 | } | |
611 | switch (n) { // stuff appropriate bits in buffer | |
612 | case 0: | |
613 | case 1: // one bit | |
614 | dest[i++]=dest[idx-1]; | |
615 | break; | |
616 | case 2: // two bits | |
617 | dest[i++]=dest[idx-1]; | |
618 | dest[i++]=dest[idx-1]; | |
619 | break; | |
620 | case 3: // 3 bit start of frame markers | |
621 | dest[i++]=dest[idx-1]; | |
622 | dest[i++]=dest[idx-1]; | |
623 | dest[i++]=dest[idx-1]; | |
624 | break; | |
625 | // When a logic 0 is immediately followed by the start of the next transmisson | |
626 | // (special pattern) a pattern of 4 bit duration lengths is created. | |
627 | case 4: | |
628 | dest[i++]=dest[idx-1]; | |
629 | dest[i++]=dest[idx-1]; | |
630 | dest[i++]=dest[idx-1]; | |
631 | dest[i++]=dest[idx-1]; | |
632 | break; | |
633 | default: // this shouldn't happen, don't stuff any bits | |
634 | break; | |
635 | } | |
636 | n=0; | |
637 | lastval=dest[idx]; | |
638 | } | |
639 | } | |
640 | m=i; | |
641 | WDT_HIT(); | |
642 | ||
643 | // final loop, go over previously decoded manchester data and decode into usable tag ID | |
644 | // 111000 bit pattern represent start of frame, 01 pattern represents a 1 and 10 represents a 0 | |
645 | for( idx=0; idx<m-6; idx++) { | |
646 | // search for a start of frame marker | |
647 | if ( dest[idx] && dest[idx+1] && dest[idx+2] && (!dest[idx+3]) && (!dest[idx+4]) && (!dest[idx+5]) ) | |
648 | { | |
649 | found=1; | |
650 | idx+=6; | |
651 | if (found && (hi|lo)) { | |
652 | DbpString("TAG ID"); | |
653 | DbpIntegers(hi, lo, (lo>>1)&0xffff); | |
955fc5e2 | 654 | /* if we're only looking for one tag */ |
655 | if (findone) | |
656 | { | |
657 | *high = hi; | |
658 | *low = lo; | |
659 | return; | |
660 | } | |
959baa89 | 661 | hi=0; |
662 | lo=0; | |
663 | found=0; | |
664 | } | |
665 | } | |
666 | if (found) { | |
667 | if (dest[idx] && (!dest[idx+1]) ) { | |
668 | hi=(hi<<1)|(lo>>31); | |
669 | lo=(lo<<1)|0; | |
670 | } else if ( (!dest[idx]) && dest[idx+1]) { | |
671 | hi=(hi<<1)|(lo>>31); | |
672 | lo=(lo<<1)|1; | |
673 | } else { | |
674 | found=0; | |
675 | hi=0; | |
676 | lo=0; | |
677 | } | |
678 | idx++; | |
679 | } | |
680 | if ( dest[idx] && dest[idx+1] && dest[idx+2] && (!dest[idx+3]) && (!dest[idx+4]) && (!dest[idx+5]) ) | |
681 | { | |
682 | found=1; | |
683 | idx+=6; | |
684 | if (found && (hi|lo)) { | |
685 | DbpString("TAG ID"); | |
686 | DbpIntegers(hi, lo, (lo>>1)&0xffff); | |
955fc5e2 | 687 | /* if we're only looking for one tag */ |
688 | if (findone) | |
689 | { | |
690 | *high = hi; | |
691 | *low = lo; | |
692 | return; | |
693 | } | |
959baa89 | 694 | hi=0; |
695 | lo=0; | |
696 | found=0; | |
697 | } | |
698 | } | |
699 | } | |
700 | WDT_HIT(); | |
701 | } | |
702 | } | |
703 | ||
704 | void SimulateTagHfListen(void) | |
705 | { | |
706 | BYTE *dest = (BYTE *)BigBuf; | |
707 | int n = sizeof(BigBuf); | |
708 | BYTE v = 0; | |
709 | int i; | |
710 | int p = 0; | |
711 | ||
712 | // We're using this mode just so that I can test it out; the simulated | |
713 | // tag mode would work just as well and be simpler. | |
714 | FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ | FPGA_HF_READER_RX_XCORR_SNOOP); | |
715 | ||
716 | // We need to listen to the high-frequency, peak-detected path. | |
717 | SetAdcMuxFor(GPIO_MUXSEL_HIPKD); | |
718 | ||
719 | FpgaSetupSsc(); | |
720 | ||
721 | i = 0; | |
722 | for(;;) { | |
723 | if(SSC_STATUS & (SSC_STATUS_TX_READY)) { | |
724 | SSC_TRANSMIT_HOLDING = 0xff; | |
725 | } | |
726 | if(SSC_STATUS & (SSC_STATUS_RX_READY)) { | |
727 | BYTE r = (BYTE)SSC_RECEIVE_HOLDING; | |
728 | ||
729 | v <<= 1; | |
730 | if(r & 1) { | |
731 | v |= 1; | |
732 | } | |
733 | p++; | |
734 | ||
735 | if(p >= 8) { | |
736 | dest[i] = v; | |
737 | v = 0; | |
738 | p = 0; | |
739 | i++; | |
740 | ||
741 | if(i >= n) { | |
742 | break; | |
743 | } | |
744 | } | |
745 | } | |
746 | } | |
747 | DbpString("simulate tag (now type bitsamples)"); | |
748 | } | |
749 | ||
750 | void UsbPacketReceived(BYTE *packet, int len) | |
751 | { | |
752 | UsbCommand *c = (UsbCommand *)packet; | |
753 | ||
754 | switch(c->cmd) { | |
755 | case CMD_ACQUIRE_RAW_ADC_SAMPLES_125K: | |
756 | AcquireRawAdcSamples125k(c->ext1); | |
757 | break; | |
758 | ||
759 | case CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K: | |
760 | ModThenAcquireRawAdcSamples125k(c->ext1,c->ext2,c->ext3,c->d.asBytes); | |
761 | break; | |
762 | ||
c701d2c2 | 763 | case CMD_ACQUIRE_RAW_BITS_TI_TYPE: |
764 | AcquireRawBitsTI(); | |
765 | break; | |
766 | ||
959baa89 | 767 | case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693: |
768 | AcquireRawAdcSamplesIso15693(); | |
769 | break; | |
f23e056d | 770 | |
771 | case CMD_BUFF_CLEAR: | |
772 | BufferClear(); | |
773 | break; | |
959baa89 | 774 | |
775 | case CMD_READER_ISO_15693: | |
776 | ReaderIso15693(c->ext1); | |
777 | break; | |
778 | ||
779 | case CMD_SIMTAG_ISO_15693: | |
780 | SimTagIso15693(c->ext1); | |
781 | break; | |
782 | ||
783 | case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443: | |
784 | AcquireRawAdcSamplesIso14443(c->ext1); | |
785 | break; | |
fb25b483 | 786 | |
787 | case CMD_READ_SRI512_TAG: | |
788 | ReadSRI512Iso14443(c->ext1); | |
789 | break; | |
959baa89 | 790 | |
791 | case CMD_READER_ISO_14443a: | |
792 | ReaderIso14443a(c->ext1); | |
793 | break; | |
794 | ||
795 | case CMD_SNOOP_ISO_14443: | |
796 | SnoopIso14443(); | |
797 | break; | |
798 | ||
799 | case CMD_SNOOP_ISO_14443a: | |
800 | SnoopIso14443a(); | |
801 | break; | |
802 | ||
803 | case CMD_SIMULATE_TAG_HF_LISTEN: | |
804 | SimulateTagHfListen(); | |
805 | break; | |
806 | ||
807 | case CMD_SIMULATE_TAG_ISO_14443: | |
808 | SimulateIso14443Tag(); | |
809 | break; | |
810 | ||
811 | case CMD_SIMULATE_TAG_ISO_14443a: | |
812 | SimulateIso14443aTag(c->ext1, c->ext2); // ## Simulate iso14443a tag - pass tag type & UID | |
813 | break; | |
814 | ||
815 | case CMD_MEASURE_ANTENNA_TUNING: | |
816 | MeasureAntennaTuning(); | |
817 | break; | |
818 | ||
7f348042 | 819 | case CMD_LISTEN_READER_FIELD: |
820 | ListenReaderField(c->ext1); | |
821 | break; | |
822 | ||
959baa89 | 823 | case CMD_HID_DEMOD_FSK: |
955fc5e2 | 824 | CmdHIDdemodFSK(0, 0, 0, 1); // Demodulate HID tag |
959baa89 | 825 | break; |
826 | ||
827 | case CMD_HID_SIM_TAG: | |
955fc5e2 | 828 | CmdHIDsimTAG(c->ext1, c->ext2, 1); // Simulate HID tag by ID |
959baa89 | 829 | break; |
830 | ||
831 | case CMD_FPGA_MAJOR_MODE_OFF: // ## FPGA Control | |
832 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); | |
833 | SpinDelay(200); | |
834 | LED_D_OFF(); // LED D indicates field ON or OFF | |
835 | break; | |
836 | ||
837 | case CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K: | |
838 | case CMD_DOWNLOAD_RAW_BITS_TI_TYPE: { | |
839 | UsbCommand n; | |
840 | if(c->cmd == CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K) { | |
841 | n.cmd = CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K; | |
842 | } else { | |
843 | n.cmd = CMD_DOWNLOADED_RAW_BITS_TI_TYPE; | |
844 | } | |
845 | n.ext1 = c->ext1; | |
846 | memcpy(n.d.asDwords, BigBuf+c->ext1, 12*sizeof(DWORD)); | |
847 | UsbSendPacket((BYTE *)&n, sizeof(n)); | |
848 | break; | |
849 | } | |
850 | case CMD_DOWNLOADED_SIM_SAMPLES_125K: { | |
851 | BYTE *b = (BYTE *)BigBuf; | |
852 | memcpy(b+c->ext1, c->d.asBytes, 48); | |
853 | break; | |
854 | } | |
855 | case CMD_SIMULATE_TAG_125K: | |
856 | LED_A_ON(); | |
955fc5e2 | 857 | SimulateTagLowFrequency(c->ext1, 1); |
959baa89 | 858 | LED_A_OFF(); |
859 | break; | |
860 | #ifdef WITH_LCD | |
861 | case CMD_LCD_RESET: | |
862 | LCDReset(); | |
863 | break; | |
864 | #endif | |
1dff8c42 | 865 | case CMD_READ_MEM: |
866 | ReadMem(c->ext1); | |
867 | break; | |
959baa89 | 868 | case CMD_SET_LF_DIVISOR: |
869 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, c->ext1); | |
870 | break; | |
871 | #ifdef WITH_LCD | |
872 | case CMD_LCD: | |
873 | LCDSend(c->ext1); | |
874 | break; | |
875 | #endif | |
876 | case CMD_SETUP_WRITE: | |
877 | case CMD_FINISH_WRITE: | |
878 | case CMD_HARDWARE_RESET: | |
879 | USB_D_PLUS_PULLUP_OFF(); | |
880 | SpinDelay(1000); | |
881 | SpinDelay(1000); | |
882 | RSTC_CONTROL = RST_CONTROL_KEY | RST_CONTROL_PROCESSOR_RESET; | |
883 | for(;;) { | |
884 | // We're going to reset, and the bootrom will take control. | |
885 | } | |
886 | break; | |
887 | ||
888 | ||
889 | default: | |
890 | DbpString("unknown command"); | |
891 | break; | |
892 | } | |
893 | } | |
894 | ||
1dff8c42 | 895 | void ReadMem(int addr) |
896 | { | |
897 | const DWORD *data = ((DWORD *)addr); | |
898 | int i; | |
c701d2c2 | 899 | |
1dff8c42 | 900 | DbpString("Reading memory at address"); |
901 | DbpIntegers(0, 0, addr); | |
902 | for (i = 0; i < 8; i+= 2) | |
903 | DbpIntegers(0, data[i], data[i+1]); | |
904 | } | |
905 | ||
959baa89 | 906 | void AppMain(void) |
907 | { | |
908 | memset(BigBuf,0,sizeof(BigBuf)); | |
909 | SpinDelay(100); | |
910 | ||
693f7cf7 | 911 | LED_D_OFF(); |
912 | LED_C_OFF(); | |
913 | LED_B_OFF(); | |
914 | LED_A_OFF(); | |
959baa89 | 915 | |
916 | UsbStart(); | |
917 | ||
918 | // The FPGA gets its clock from us from PCK0 output, so set that up. | |
919 | PIO_PERIPHERAL_B_SEL = (1 << GPIO_PCK0); | |
920 | PIO_DISABLE = (1 << GPIO_PCK0); | |
921 | PMC_SYS_CLK_ENABLE = PMC_SYS_CLK_PROGRAMMABLE_CLK_0; | |
922 | // PCK0 is PLL clock / 4 = 96Mhz / 4 = 24Mhz | |
923 | PMC_PROGRAMMABLE_CLK_0 = PMC_CLK_SELECTION_PLL_CLOCK | | |
924 | PMC_CLK_PRESCALE_DIV_4; | |
925 | PIO_OUTPUT_ENABLE = (1 << GPIO_PCK0); | |
926 | ||
927 | // Reset SPI | |
928 | SPI_CONTROL = SPI_CONTROL_RESET; | |
929 | // Reset SSC | |
930 | SSC_CONTROL = SSC_CONTROL_RESET; | |
931 | ||
932 | // Load the FPGA image, which we have stored in our flash. | |
933 | FpgaDownloadAndGo(); | |
934 | ||
935 | #ifdef WITH_LCD | |
936 | ||
937 | LCDInit(); | |
938 | ||
939 | // test text on different colored backgrounds | |
693f7cf7 | 940 | LCDString(" The quick brown fox ", &FONT6x8,1,1+8*0,WHITE ,BLACK ); |
941 | LCDString(" jumped over the ", &FONT6x8,1,1+8*1,BLACK ,WHITE ); | |
942 | LCDString(" lazy dog. ", &FONT6x8,1,1+8*2,YELLOW ,RED ); | |
943 | LCDString(" AaBbCcDdEeFfGgHhIiJj ", &FONT6x8,1,1+8*3,RED ,GREEN ); | |
944 | LCDString(" KkLlMmNnOoPpQqRrSsTt ", &FONT6x8,1,1+8*4,MAGENTA,BLUE ); | |
945 | LCDString("UuVvWwXxYyZz0123456789", &FONT6x8,1,1+8*5,BLUE ,YELLOW); | |
946 | LCDString("`-=[]_;',./~!@#$%^&*()", &FONT6x8,1,1+8*6,BLACK ,CYAN ); | |
947 | LCDString(" _+{}|:\\\"<>? ",&FONT6x8,1,1+8*7,BLUE ,MAGENTA); | |
959baa89 | 948 | |
949 | // color bands | |
950 | LCDFill(0, 1+8* 8, 132, 8, BLACK); | |
951 | LCDFill(0, 1+8* 9, 132, 8, WHITE); | |
952 | LCDFill(0, 1+8*10, 132, 8, RED); | |
953 | LCDFill(0, 1+8*11, 132, 8, GREEN); | |
954 | LCDFill(0, 1+8*12, 132, 8, BLUE); | |
955 | LCDFill(0, 1+8*13, 132, 8, YELLOW); | |
956 | LCDFill(0, 1+8*14, 132, 8, CYAN); | |
957 | LCDFill(0, 1+8*15, 132, 8, MAGENTA); | |
958 | ||
959 | #endif | |
960 | ||
961 | for(;;) { | |
955fc5e2 | 962 | usbattached = UsbPoll(FALSE); |
959baa89 | 963 | WDT_HIT(); |
959baa89 | 964 | |
955fc5e2 | 965 | if (BUTTON_HELD(1000) > 0) |
966 | SamyRun(); | |
959baa89 | 967 | } |
968 | } | |
969 | ||
959baa89 | 970 | |
955fc5e2 | 971 | // samy's sniff and repeat routine |
972 | void SamyRun() | |
973 | { | |
974 | DbpString("Stand-alone mode! No PC necessary."); | |
959baa89 | 975 | |
955fc5e2 | 976 | // 3 possible options? no just 2 for now |
977 | #define OPTS 2 | |
959baa89 | 978 | |
955fc5e2 | 979 | int high[OPTS], low[OPTS]; |
c701d2c2 | 980 | |
955fc5e2 | 981 | // Oooh pretty -- notify user we're in elite samy mode now |
982 | LED(LED_RED, 200); | |
983 | LED(LED_ORANGE, 200); | |
984 | LED(LED_GREEN, 200); | |
985 | LED(LED_ORANGE, 200); | |
986 | LED(LED_RED, 200); | |
987 | LED(LED_ORANGE, 200); | |
988 | LED(LED_GREEN, 200); | |
989 | LED(LED_ORANGE, 200); | |
990 | LED(LED_RED, 200); | |
c701d2c2 | 991 | |
955fc5e2 | 992 | int selected = 0; |
993 | int playing = 0; | |
c701d2c2 | 994 | |
955fc5e2 | 995 | // Turn on selected LED |
996 | LED(selected + 1, 0); | |
c701d2c2 | 997 | |
955fc5e2 | 998 | for (;;) |
999 | { | |
1000 | usbattached = UsbPoll(FALSE); | |
959baa89 | 1001 | WDT_HIT(); |
c701d2c2 | 1002 | |
955fc5e2 | 1003 | // Was our button held down or pressed? |
1004 | int button_pressed = BUTTON_HELD(1000); | |
1005 | SpinDelay(300); | |
c701d2c2 | 1006 | |
955fc5e2 | 1007 | // Button was held for a second, begin recording |
1008 | if (button_pressed > 0) | |
1009 | { | |
1010 | LEDsoff(); | |
1011 | LED(selected + 1, 0); | |
1012 | LED(LED_RED2, 0); | |
c701d2c2 | 1013 | |
955fc5e2 | 1014 | // record |
1015 | DbpString("Starting recording"); | |
693f7cf7 | 1016 | |
1017 | // wait for button to be released | |
1018 | while(BUTTON_PRESS()) | |
1019 | WDT_HIT(); | |
1020 | ||
955fc5e2 | 1021 | /* need this delay to prevent catching some weird data */ |
1022 | SpinDelay(500); | |
693f7cf7 | 1023 | |
955fc5e2 | 1024 | CmdHIDdemodFSK(1, &high[selected], &low[selected], 0); |
1025 | DbpString("Recorded"); | |
1026 | DbpIntegers(selected, high[selected], low[selected]); | |
c701d2c2 | 1027 | |
955fc5e2 | 1028 | LEDsoff(); |
1029 | LED(selected + 1, 0); | |
1030 | // Finished recording | |
c701d2c2 | 1031 | |
955fc5e2 | 1032 | // If we were previously playing, set playing off |
1033 | // so next button push begins playing what we recorded | |
1034 | playing = 0; | |
1035 | } | |
c701d2c2 | 1036 | |
955fc5e2 | 1037 | // Change where to record (or begin playing) |
1038 | else if (button_pressed) | |
1039 | { | |
1040 | // Next option if we were previously playing | |
1041 | if (playing) | |
1042 | selected = (selected + 1) % OPTS; | |
1043 | playing = !playing; | |
c701d2c2 | 1044 | |
955fc5e2 | 1045 | LEDsoff(); |
1046 | LED(selected + 1, 0); | |
c701d2c2 | 1047 | |
955fc5e2 | 1048 | // Begin transmitting |
1049 | if (playing) | |
1050 | { | |
1051 | LED(LED_GREEN, 0); | |
1052 | DbpString("Playing"); | |
693f7cf7 | 1053 | // wait for button to be released |
1054 | while(BUTTON_PRESS()) | |
1055 | WDT_HIT(); | |
955fc5e2 | 1056 | DbpIntegers(selected, high[selected], low[selected]); |
1057 | CmdHIDsimTAG(high[selected], low[selected], 0); | |
1058 | DbpString("Done playing"); | |
693f7cf7 | 1059 | if (BUTTON_HELD(1000) > 0) |
1060 | { | |
1061 | DbpString("Exiting"); | |
1062 | LEDsoff(); | |
1063 | return; | |
1064 | } | |
c701d2c2 | 1065 | |
955fc5e2 | 1066 | /* We pressed a button so ignore it here with a delay */ |
1067 | SpinDelay(300); | |
c701d2c2 | 1068 | |
955fc5e2 | 1069 | // when done, we're done playing, move to next option |
1070 | selected = (selected + 1) % OPTS; | |
1071 | playing = !playing; | |
1072 | LEDsoff(); | |
1073 | LED(selected + 1, 0); | |
1074 | } | |
693f7cf7 | 1075 | else |
1076 | while(BUTTON_PRESS()) | |
1077 | WDT_HIT(); | |
955fc5e2 | 1078 | } |
959baa89 | 1079 | } |
1080 | } | |
7f348042 | 1081 | |
955fc5e2 | 1082 | |
c701d2c2 | 1083 | // listen for external reader |
7f348042 | 1084 | void ListenReaderField(int limit) |
1085 | { | |
1dd23352 | 1086 | int lf_av, lf_av_new, lf_baseline= 0, lf_count= 0; |
1087 | int hf_av, hf_av_new, hf_baseline= 0, hf_count= 0; | |
7f348042 | 1088 | |
1089 | #define LF_ONLY 1 | |
1090 | #define HF_ONLY 2 | |
1091 | ||
1092 | LED_A_OFF(); | |
1093 | LED_B_OFF(); | |
1094 | LED_C_OFF(); | |
1095 | LED_D_OFF(); | |
1096 | ||
1097 | lf_av= ReadAdc(ADC_CHAN_LF); | |
1098 | ||
c701d2c2 | 1099 | if(limit != HF_ONLY) |
7f348042 | 1100 | { |
1101 | DbpString("LF 125/134 Baseline:"); | |
1102 | DbpIntegers(lf_av,0,0); | |
1103 | lf_baseline= lf_av; | |
1104 | } | |
1105 | ||
1106 | hf_av= ReadAdc(ADC_CHAN_HF); | |
1107 | ||
1108 | ||
c701d2c2 | 1109 | if (limit != LF_ONLY) |
7f348042 | 1110 | { |
1111 | DbpString("HF 13.56 Baseline:"); | |
1112 | DbpIntegers(hf_av,0,0); | |
1113 | hf_baseline= hf_av; | |
1114 | } | |
1115 | ||
c701d2c2 | 1116 | for(;;) |
7f348042 | 1117 | { |
c701d2c2 | 1118 | if(BUTTON_PRESS()) |
7f348042 | 1119 | { |
6bd86cb2 | 1120 | DbpString("Stopped"); |
7f348042 | 1121 | LED_B_OFF(); |
1122 | LED_D_OFF(); | |
1123 | return; | |
1124 | } | |
1125 | WDT_HIT(); | |
1126 | ||
1127 | ||
c701d2c2 | 1128 | if (limit != HF_ONLY) |
7f348042 | 1129 | { |
1130 | if (abs(lf_av - lf_baseline) > 10) | |
1131 | LED_D_ON(); | |
1132 | else | |
1133 | LED_D_OFF(); | |
1134 | ++lf_count; | |
1135 | lf_av_new= ReadAdc(ADC_CHAN_LF); | |
1136 | // see if there's a significant change | |
c701d2c2 | 1137 | if(abs(lf_av - lf_av_new) > 10) |
7f348042 | 1138 | { |
1139 | DbpString("LF 125/134 Field Change:"); | |
1140 | DbpIntegers(lf_av,lf_av_new,lf_count); | |
1141 | lf_av= lf_av_new; | |
1142 | lf_count= 0; | |
1143 | } | |
1144 | } | |
1145 | ||
c701d2c2 | 1146 | if (limit != LF_ONLY) |
7f348042 | 1147 | { |
1148 | if (abs(hf_av - hf_baseline) > 10) | |
1149 | LED_B_ON(); | |
1150 | else | |
1151 | LED_B_OFF(); | |
1152 | ++hf_count; | |
1153 | hf_av_new= ReadAdc(ADC_CHAN_HF); | |
1154 | // see if there's a significant change | |
c701d2c2 | 1155 | if(abs(hf_av - hf_av_new) > 10) |
7f348042 | 1156 | { |
1157 | DbpString("HF 13.56 Field Change:"); | |
1158 | DbpIntegers(hf_av,hf_av_new,hf_count); | |
1159 | hf_av= hf_av_new; | |
1160 | hf_count= 0; | |
1161 | } | |
1162 | } | |
1163 | } | |
1164 | } |