Fix PrintAndLogEx ERR (#748)

[proxmark3-svn] / client / fpga_compress.c

//-----------------------------------------------------------------------------
// piwi, 2017, 2018
//
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
// at your option, any later version. See the LICENSE.txt file for the text of
// the license.
//-----------------------------------------------------------------------------
// Compression tool for FPGA config files. Compress several *.bit files at
// compile time. Decompression is done at run time (see fpgaloader.c).
// This uses the zlib library tuned to this specific case. The small file sizes
// allow to use "insane" parameters for optimum compression ratio.
//-----------------------------------------------------------------------------

#include <stdio.h>
#include <stdlib.h>
#include <libgen.h>
#include <string.h>
#include <stdint.h>
#include <stdbool.h>
#include "fpga.h"
#include "zlib.h"

#define MAX(a,b) ((a)>(b)?(a):(b))

// zlib configuration
#define COMPRESS_LEVEL           9  // use best possible compression
#define COMPRESS_WINDOW_BITS    15  // default = max = 15 for a window of 2^15 = 32KBytes
#define COMPRESS_MEM_LEVEL       9  // determines the amount of memory allocated during compression. Default = 8.
/* COMPRESS_STRATEGY can be 
	Z_DEFAULT_STRATEGY (the default), 
	Z_FILTERED (more huffmann, less string matching),
	Z_HUFFMAN_ONLY (huffman only, no string matching)
	Z_RLE (distances limited to one)
	Z_FIXED (prevents the use of dynamic Huffman codes)
*/

#define	COMPRESS_STRATEGY       Z_DEFAULT_STRATEGY
// zlib tuning parameters:
#define COMPRESS_GOOD_LENGTH           258
#define COMPRESS_MAX_LAZY              258
#define COMPRESS_MAX_NICE_LENGTH       258
#define COMPRESS_MAX_CHAIN            8192

#define HARDNESTED_TABLE_SIZE		(sizeof(uint32_t) * ((1L<<19)+1))

static void usage(void)
{
	fprintf(stdout, "Usage: fpga_compress <infile1> <infile2> ... <infile_n> <outfile>\n");
	fprintf(stdout, "          Combine n FPGA bitstream files and compress them into one.\n\n");
	fprintf(stdout, "       fpga_compress -v <infile1> <infile2> ... <infile_n> <outfile>\n");
	fprintf(stdout, "          Extract Version Information from FPGA bitstream files and write it to <outfile>\n\n");
	fprintf(stdout, "       fpga_compress -d <infile> <outfile>\n");
	fprintf(stdout, "          Decompress <infile>. Write result to <outfile>\n\n");
	fprintf(stdout, "       fpga_compress -t <infile> <outfile>\n");
	fprintf(stdout, "          Compress hardnested table <infile>. Write result to <outfile>\n\n");
}


static voidpf fpga_deflate_malloc(voidpf opaque, uInt items, uInt size)
{
	return malloc(items*size);
}


static void fpga_deflate_free(voidpf opaque, voidpf address)
{
	free(address);
}


static bool all_feof(FILE *infile[], uint8_t num_infiles)
{
	for (uint16_t i = 0; i < num_infiles; i++) {
		if (!feof(infile[i])) {
			return false;
		}
	}
	
	return true;
}


int zlib_compress(FILE *infile[], uint8_t num_infiles, FILE *outfile, bool hardnested_mode)
{
	uint8_t *fpga_config;
	uint32_t i;
	int32_t ret;
	uint8_t c;
	z_stream compressed_fpga_stream;

	if (hardnested_mode) {
		fpga_config = malloc(num_infiles * HARDNESTED_TABLE_SIZE);
	} else {
		fpga_config = malloc(num_infiles * FPGA_CONFIG_SIZE);
	}		
	// read the input files. Interleave them into fpga_config[]
	i = 0;
	do {

		if (i >= num_infiles * (hardnested_mode?HARDNESTED_TABLE_SIZE:FPGA_CONFIG_SIZE)) {
			if (hardnested_mode) {
				fprintf(stderr, "Input file too big (> %lu bytes). This is probably not a hardnested bitflip state table.\n", HARDNESTED_TABLE_SIZE);
			} else {
				fprintf(stderr, "Input files too big (total > %lu bytes). These are probably not PM3 FPGA config files.\n", num_infiles*FPGA_CONFIG_SIZE);
			}
			for(uint16_t j = 0; j < num_infiles; j++) {
				fclose(infile[j]);
			}
			free(fpga_config);
			return(EXIT_FAILURE);
		}

		for(uint16_t j = 0; j < num_infiles; j++) {
			for(uint16_t k = 0; k < FPGA_INTERLEAVE_SIZE; k++) {
				c = (uint8_t)fgetc(infile[j]);
				if (!feof(infile[j])) {
					fpga_config[i++] = c;
				} else if (num_infiles > 1) {
					fpga_config[i++] = '\0';
				}
			}
		}

	} while (!all_feof(infile, num_infiles));

	// initialize zlib structures
	compressed_fpga_stream.next_in = fpga_config;
	compressed_fpga_stream.avail_in = i;
	compressed_fpga_stream.zalloc = fpga_deflate_malloc;
	compressed_fpga_stream.zfree = fpga_deflate_free;
	compressed_fpga_stream.opaque = Z_NULL;
	ret = deflateInit2(&compressed_fpga_stream, 
						COMPRESS_LEVEL,
						Z_DEFLATED,
						COMPRESS_WINDOW_BITS,
						COMPRESS_MEM_LEVEL,
						COMPRESS_STRATEGY);

	// estimate the size of the compressed output
	uint32_t outsize_max = deflateBound(&compressed_fpga_stream, compressed_fpga_stream.avail_in);
	uint8_t *outbuf = malloc(outsize_max);
	compressed_fpga_stream.next_out = outbuf;
	compressed_fpga_stream.avail_out = outsize_max;
        
	if (ret == Z_OK) {
		ret = deflateTune(&compressed_fpga_stream,
							COMPRESS_GOOD_LENGTH,
							COMPRESS_MAX_LAZY,
							COMPRESS_MAX_NICE_LENGTH,
							COMPRESS_MAX_CHAIN);
	}
	
	if (ret == Z_OK) {
		ret = deflate(&compressed_fpga_stream, Z_FINISH);
	}
	
	fprintf(stdout, "compressed %u input bytes to %lu output bytes\n", i, compressed_fpga_stream.total_out);

	if (ret != Z_STREAM_END) {
		fprintf(stderr, "Error in deflate(): %i %s\n", ret, compressed_fpga_stream.msg);
		free(outbuf);
		deflateEnd(&compressed_fpga_stream);
		for(uint16_t j = 0; j < num_infiles; j++) {
			fclose(infile[j]);
		}
		fclose(outfile);
		free(infile);
		free(fpga_config);
		return(EXIT_FAILURE);
		}
		
	for (i = 0; i < compressed_fpga_stream.total_out; i++) {
		fputc(outbuf[i], outfile);
	}	

	free(outbuf);
	deflateEnd(&compressed_fpga_stream);
	for(uint16_t j = 0; j < num_infiles; j++) {
		fclose(infile[j]);
	}
	fclose(outfile);
	free(infile);
	free(fpga_config);
	
	return(EXIT_SUCCESS);
	
}


int zlib_decompress(FILE *infile, FILE *outfile)
{
	#define DECOMPRESS_BUF_SIZE 1024
	uint8_t outbuf[DECOMPRESS_BUF_SIZE];
	uint8_t inbuf[DECOMPRESS_BUF_SIZE];
	int32_t ret;
	
	z_stream compressed_fpga_stream;

	// initialize zlib structures
	compressed_fpga_stream.next_in = inbuf;
	compressed_fpga_stream.avail_in = 0;
	compressed_fpga_stream.next_out = outbuf;
	compressed_fpga_stream.avail_out = DECOMPRESS_BUF_SIZE;
	compressed_fpga_stream.zalloc = fpga_deflate_malloc;
	compressed_fpga_stream.zfree = fpga_deflate_free;
	compressed_fpga_stream.opaque = Z_NULL;
	
	ret = inflateInit2(&compressed_fpga_stream, 0);
	
	do {
		if (compressed_fpga_stream.avail_in == 0) {
			compressed_fpga_stream.next_in = inbuf;
			uint16_t i = 0;
			do {
				int32_t c = fgetc(infile);
				if (!feof(infile)) {
					inbuf[i++] = c & 0xFF;
					compressed_fpga_stream.avail_in++;
				} else {
					break;
				}
			} while (i < DECOMPRESS_BUF_SIZE);
		}

		ret = inflate(&compressed_fpga_stream, Z_SYNC_FLUSH);

		if (ret != Z_OK && ret != Z_STREAM_END) {
			break;
		}

		if (compressed_fpga_stream.avail_out == 0) {
			for (uint16_t i = 0; i < DECOMPRESS_BUF_SIZE; i++) {
				fputc(outbuf[i], outfile);
			}
			compressed_fpga_stream.avail_out = DECOMPRESS_BUF_SIZE;
			compressed_fpga_stream.next_out = outbuf;
		}
	} while (ret == Z_OK);

	if (ret == Z_STREAM_END) {  // reached end of input
		uint16_t i = 0;
		while (compressed_fpga_stream.avail_out < DECOMPRESS_BUF_SIZE) {
			fputc(outbuf[i++], outfile);
			compressed_fpga_stream.avail_out++;
		}
		fclose(outfile);
		fclose(infile);
		return(EXIT_SUCCESS);
	} else {
		fprintf(stderr, "Error. Inflate() returned error %i, %s", ret, compressed_fpga_stream.msg);
		fclose(outfile);
		fclose(infile);
		return(EXIT_FAILURE);
	}
	
}


/* Simple Xilinx .bit parser. The file starts with the fixed opaque byte sequence
 * 00 09 0f f0 0f f0 0f f0 0f f0 00 00 01
 * After that the format is 1 byte section type (ASCII character), 2 byte length
 * (big endian), <length> bytes content. Except for section 'e' which has 4 bytes
 * length.
 */
static int bitparse_find_section(FILE *infile, char section_name, unsigned int *section_length)
{
	int result = 0;
	#define MAX_FPGA_BIT_STREAM_HEADER_SEARCH 100  // maximum number of bytes to search for the requested section
	uint16_t numbytes = 0;
	while(numbytes < MAX_FPGA_BIT_STREAM_HEADER_SEARCH) {
		char current_name = (char)fgetc(infile);
		numbytes++;
		if(current_name < 'a' || current_name > 'e') {
			/* Strange section name, abort */
			break;
		}
		unsigned int current_length = 0;
		switch(current_name) {
		case 'e':
			/* Four byte length field */
			current_length += fgetc(infile) << 24;
			current_length += fgetc(infile) << 16;
			numbytes += 2;
		default: /* Fall through, two byte length field */
			current_length += fgetc(infile) << 8;
			current_length += fgetc(infile) << 0;
			numbytes += 2;
		}

		if(current_name != 'e' && current_length > 255) {
			/* Maybe a parse error */
			break;
		}

		if(current_name == section_name) {
			/* Found it */
			*section_length = current_length;
			result = 1;
			break;
		}

		for (uint16_t i = 0; i < current_length && numbytes < MAX_FPGA_BIT_STREAM_HEADER_SEARCH; i++) {
			(void)fgetc(infile);
			numbytes++;
		}
	}

	return result;
}


static int FpgaGatherVersion(FILE *infile, char* infile_name, char *dst, int len)
{
	unsigned int fpga_info_len;
	char tempstr[40] = {0x00};
	
	dst[0] = '\0';

	for (uint16_t i = 0; i < FPGA_BITSTREAM_FIXED_HEADER_SIZE; i++) {
		if (fgetc(infile) != bitparse_fixed_header[i]) {
			fprintf(stderr, "Invalid FPGA file. Aborting...\n\n");
			return(EXIT_FAILURE);
		}
	}

	strncat(dst, basename(infile_name), len-1);
	// if (bitparse_find_section(infile, 'a', &fpga_info_len)) {
		// for (uint16_t i = 0; i < fpga_info_len; i++) {
			// char c = (char)fgetc(infile);
			// if (i < sizeof(tempstr)) {
				// tempstr[i] = c;
			// }
		// }
		// strncat(dst, tempstr, len-1);
	// }
	strncat(dst, " built", len-1);
	if (bitparse_find_section(infile, 'b', &fpga_info_len)) {
		strncat(dst, " for ", len-1);
		for (uint16_t i = 0; i < fpga_info_len; i++) {
			char c = (char)fgetc(infile);
			if (i < sizeof(tempstr)) {
				tempstr[i] = c;
			}
		}
		strncat(dst, tempstr, len-1);
	}
	if (bitparse_find_section(infile, 'c', &fpga_info_len)) {
		strncat(dst, " on ", len-1);
		for (uint16_t i = 0; i < fpga_info_len; i++) {
			char c = (char)fgetc(infile);
			if (i < sizeof(tempstr)) {
				tempstr[i] = c;
			}
		}
		strncat(dst, tempstr, len-1);
	}
	if (bitparse_find_section(infile, 'd', &fpga_info_len)) {
		strncat(dst, " at ", len-1);
		for (uint16_t i = 0; i < fpga_info_len; i++) {
			char c = (char)fgetc(infile);
			if (i < sizeof(tempstr)) {
				tempstr[i] = c;
			}
		}
		strncat(dst, tempstr, len-1);
	}
	return 0;
}


static void print_version_info_preamble(FILE *outfile, int num_infiles) {
	fprintf(outfile, "//-----------------------------------------------------------------------------\n");
	fprintf(outfile, "// piwi, 2018\n");
	fprintf(outfile, "//\n");
	fprintf(outfile, "// This code is licensed to you under the terms of the GNU GPL, version 2 or,\n");
	fprintf(outfile, "// at your option, any later version. See the LICENSE.txt file for the text of\n");
	fprintf(outfile, "// the license.\n");
	fprintf(outfile, "//-----------------------------------------------------------------------------\n");
	fprintf(outfile, "// Version information on fpga images\n");
	fprintf(outfile, "//\n");
	fprintf(outfile, "// This file is generated by fpga_compress. Don't edit!\n");
	fprintf(outfile, "//-----------------------------------------------------------------------------\n");
	fprintf(outfile, "\n");
	fprintf(outfile, "\n");
	fprintf(outfile, "const int fpga_bitstream_num = %d;\n", num_infiles);
	fprintf(outfile, "const char* const fpga_version_information[%d] = {\n", num_infiles);
}


static int generate_fpga_version_info(FILE *infile[], char *infile_names[], int num_infiles, FILE *outfile) {
	
	char version_string[80] = "";
	
	print_version_info_preamble(outfile, num_infiles);
	
	for (int i = 0; i < num_infiles; i++) {
		FpgaGatherVersion(infile[i], infile_names[i], version_string, sizeof(version_string));
		fprintf(outfile, "\t\"%s\"", version_string);
		if (i != num_infiles-1) {
			fprintf(outfile, ",");
		}
		fprintf(outfile,"\n");
	}
	
	fprintf(outfile, "};\n");

	return 0;
}	


int main(int argc, char **argv)
{
	FILE **infiles;
	char **infile_names;
	FILE *outfile;
	
	if (argc == 1 || argc == 2) {
		usage();
		return(EXIT_FAILURE);
	}
	
	if (!strcmp(argv[1], "-d")) { // Decompress

		infiles = calloc(1, sizeof(FILE*));
		if (argc != 4) {
			usage();
			return(EXIT_FAILURE);
		} 
		infiles[0] = fopen(argv[2], "rb");
		if (infiles[0] == NULL) {
			fprintf(stderr, "Error. Cannot open input file %s\n\n", argv[2]);
			return(EXIT_FAILURE);
		}
		outfile = fopen(argv[3], "wb");
		if (outfile == NULL) {
			fprintf(stderr, "Error. Cannot open output file %s\n\n", argv[3]);
			return(EXIT_FAILURE);
		}
		return zlib_decompress(infiles[0], outfile);

	} else { // Compress or gemerate version info

		bool hardnested_mode = false;
		bool generate_version_file = false;
		int num_input_files = 0;
		if (!strcmp(argv[1], "-t")) { 			// compress one hardnested table
			if (argc != 4) {
				usage();
				return(EXIT_FAILURE);
			}
			hardnested_mode = true;
			num_input_files = 1;
		} else if (!strcmp(argv[1], "-v")) { 	// generate version info
			generate_version_file = true;
			num_input_files = argc-3;
		} else { 								// compress 1..n fpga files
			num_input_files = argc-2;
		}
			
		infiles = calloc(num_input_files, sizeof(FILE*));
		infile_names = calloc(num_input_files, sizeof(char*));
		for (uint16_t i = 0; i < num_input_files; i++) {
			infile_names[i] = argv[i+((hardnested_mode || generate_version_file)?2:1)];
			infiles[i] = fopen(infile_names[i], "rb");
			if (infiles[i] == NULL) {
				fprintf(stderr, "Error. Cannot open input file %s\n\n", infile_names[i]);
				return(EXIT_FAILURE);
			}
		}
		outfile = fopen(argv[argc-1], "wb");
		if (outfile == NULL) {
			fprintf(stderr, "Error. Cannot open output file %s\n\n", argv[argc-1]);
			return(EXIT_FAILURE);
		}
		if (generate_version_file) {
			if (generate_fpga_version_info(infiles, infile_names, num_input_files, outfile)) {
				return(EXIT_FAILURE);
			}
		} else {
			return zlib_compress(infiles, num_input_files, outfile, hardnested_mode);
		}
	}
}