]> cvs.zerfleddert.de Git - proxmark3-svn/blame - client/hid-flasher/usb_cmd.h
ADD: There were lot of calls to enable tracing, but very few to turn it of afterwar...
[proxmark3-svn] / client / hid-flasher / usb_cmd.h
CommitLineData
e9281ae8
JH
1//-----------------------------------------------------------------------------
2// Jonathan Westhues, Mar 2006
3// Edits by Gerhard de Koning Gans, Sep 2007
4//
5// This code is licensed to you under the terms of the GNU GPL, version 2 or,
6// at your option, any later version. See the LICENSE.txt file for the text of
7// the license.
8//-----------------------------------------------------------------------------
9// Definitions for all the types of commands that may be sent over USB; our
10// own protocol.
11//-----------------------------------------------------------------------------
12
13#ifndef __USB_CMD_H
14#define __USB_CMD_H
15#ifdef _MSC_VER
16typedef DWORD uint32_t;
17typedef BYTE uint8_t;
18#define PACKED
19// stuff
20#else
21#include <stdint.h>
22#include <stdbool.h>
23#define PACKED __attribute__((packed))
24#endif
25
5de79e20 26#define USB_CMD_DATA_SIZE 512
27
e9281ae8 28typedef struct {
5de79e20 29 uint64_t cmd;
30 uint64_t arg[3];
e9281ae8 31 union {
5de79e20 32 uint8_t asBytes[USB_CMD_DATA_SIZE];
33 uint32_t asDwords[USB_CMD_DATA_SIZE/4];
e9281ae8
JH
34 } d;
35} PACKED UsbCommand;
5de79e20 36// A struct used to send sample-configs over USB
37typedef struct{
38 uint8_t decimation;
39 uint8_t bits_per_sample;
40 bool averaging;
41 int divisor;
42 int trigger_threshold;
43} sample_config;
e9281ae8
JH
44
45// For the bootloader
46#define CMD_DEVICE_INFO 0x0000
47#define CMD_SETUP_WRITE 0x0001
48#define CMD_FINISH_WRITE 0x0003
49#define CMD_HARDWARE_RESET 0x0004
50#define CMD_START_FLASH 0x0005
51#define CMD_NACK 0x00fe
52#define CMD_ACK 0x00ff
53
54// For general mucking around
55#define CMD_DEBUG_PRINT_STRING 0x0100
56#define CMD_DEBUG_PRINT_INTEGERS 0x0101
57#define CMD_DEBUG_PRINT_BYTES 0x0102
58#define CMD_LCD_RESET 0x0103
59#define CMD_LCD 0x0104
60#define CMD_BUFF_CLEAR 0x0105
61#define CMD_READ_MEM 0x0106
62#define CMD_VERSION 0x0107
7838f4be 63#define CMD_STATUS 0x0108
64#define CMD_PING 0x0109
65
e9281ae8
JH
66// For low-frequency tags
67#define CMD_READ_TI_TYPE 0x0202
68#define CMD_WRITE_TI_TYPE 0x0203
69#define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204
70#define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205
71#define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206
72#define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207
73#define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208
74#define CMD_DOWNLOADED_SIM_SAMPLES_125K 0x0209
75#define CMD_SIMULATE_TAG_125K 0x020A
76#define CMD_HID_DEMOD_FSK 0x020B
77#define CMD_HID_SIM_TAG 0x020C
78#define CMD_SET_LF_DIVISOR 0x020D
79#define CMD_LF_SIMULATE_BIDIR 0x020E
80#define CMD_SET_ADC_MUX 0x020F
81#define CMD_HID_CLONE_TAG 0x0210
82#define CMD_EM410X_WRITE_TAG 0x0211
83#define CMD_INDALA_CLONE_TAG 0x0212
84// for 224 bits UID
85#define CMD_INDALA_CLONE_TAG_L 0x0213
abd6112f 86#define CMD_T55XX_READ_BLOCK 0x0214
87#define CMD_T55XX_WRITE_BLOCK 0x0215
88#define CMD_T55XX_READ_TRACE 0x0216
89#define CMD_PCF7931_READ 0x0217
f3cfe428 90#define CMD_PCF7931_WRITE 0x0223
abd6112f 91#define CMD_EM4X_READ_WORD 0x0218
92#define CMD_EM4X_WRITE_WORD 0x0219
93#define CMD_IO_DEMOD_FSK 0x021A
94#define CMD_IO_CLONE_TAG 0x021B
95#define CMD_EM410X_DEMOD 0x021c
5de79e20 96// Sampling configuration for LF reader/snooper
abd6112f 97#define CMD_SET_LF_SAMPLING_CONFIG 0x021d
98#define CMD_FSK_SIM_TAG 0x021E
99#define CMD_ASK_SIM_TAG 0x021F
872e3d4d 100#define CMD_PSK_SIM_TAG 0x0220
db25599d 101#define CMD_AWID_DEMOD_FSK 0x0221
0de8e387 102#define CMD_VIKING_CLONE_TAG 0x0222
e9281ae8
JH
103
104/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */
105
106// For the 13.56 MHz tags
107#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300
e9281ae8
JH
108#define CMD_READ_SRI512_TAG 0x0303
109#define CMD_READ_SRIX4K_TAG 0x0304
5de79e20 110#define CMD_ISO_14443B_COMMAND 0x0305
e9281ae8
JH
111#define CMD_READER_ISO_15693 0x0310
112#define CMD_SIMTAG_ISO_15693 0x0311
113#define CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 0x0312
114#define CMD_ISO_15693_COMMAND 0x0313
115#define CMD_ISO_15693_COMMAND_DONE 0x0314
116#define CMD_ISO_15693_FIND_AFI 0x0315
117#define CMD_ISO_15693_DEBUG 0x0316
5de79e20 118#define CMD_LF_SNOOP_RAW_ADC_SAMPLES 0x0317
e9281ae8
JH
119
120// For Hitag2 transponders
121#define CMD_SNOOP_HITAG 0x0370
122#define CMD_SIMULATE_HITAG 0x0371
123#define CMD_READER_HITAG 0x0372
124
132a0217 125#define CMD_SIMULATE_TAG_ISO_14443B 0x0381
126#define CMD_SNOOP_ISO_14443B 0x0382
e9281ae8
JH
127#define CMD_SNOOP_ISO_14443a 0x0383
128#define CMD_SIMULATE_TAG_ISO_14443a 0x0384
129#define CMD_READER_ISO_14443a 0x0385
130#define CMD_SIMULATE_TAG_LEGIC_RF 0x0387
131#define CMD_READER_LEGIC_RF 0x0388
132#define CMD_WRITER_LEGIC_RF 0x0389
133#define CMD_EPA_PACE_COLLECT_NONCE 0x038A
d0f3338e 134#define CMD_EPA_PACE_REPLAY 0x038B
e9281ae8
JH
135
136#define CMD_SNOOP_ICLASS 0x0392
137#define CMD_SIMULATE_TAG_ICLASS 0x0393
138#define CMD_READER_ICLASS 0x0394
5de79e20 139#define CMD_READER_ICLASS_REPLAY 0x0395
140#define CMD_ICLASS_ISO14443A_WRITE 0x0397
141#define CMD_ICLASS_EML_MEMSET 0x0398
e9281ae8
JH
142
143// For measurements of the antenna tuning
144#define CMD_MEASURE_ANTENNA_TUNING 0x0400
145#define CMD_MEASURE_ANTENNA_TUNING_HF 0x0401
146#define CMD_MEASURED_ANTENNA_TUNING 0x0410
147#define CMD_LISTEN_READER_FIELD 0x0420
148
149// For direct FPGA control
150#define CMD_FPGA_MAJOR_MODE_OFF 0x0500
151
152// For mifare commands
153#define CMD_MIFARE_SET_DBGMODE 0x0600
154#define CMD_MIFARE_EML_MEMCLR 0x0601
155#define CMD_MIFARE_EML_MEMSET 0x0602
156#define CMD_MIFARE_EML_MEMGET 0x0603
157#define CMD_MIFARE_EML_CARDLOAD 0x0604
5de79e20 158
159// magic chinese card commands
160#define CMD_MIFARE_CSETBLOCK 0x0605
161#define CMD_MIFARE_CGETBLOCK 0x0606
162#define CMD_MIFARE_CIDENT 0x0607
e9281ae8
JH
163
164#define CMD_SIMULATE_MIFARE_CARD 0x0610
165
166#define CMD_READER_MIFARE 0x0611
167#define CMD_MIFARE_NESTED 0x0612
168
169#define CMD_MIFARE_READBL 0x0620
5de79e20 170#define CMD_MIFAREU_READBL 0x0720
e9281ae8 171#define CMD_MIFARE_READSC 0x0621
5de79e20 172#define CMD_MIFAREU_READCARD 0x0721
e9281ae8 173#define CMD_MIFARE_WRITEBL 0x0622
5de79e20 174#define CMD_MIFAREU_WRITEBL 0x0722
175#define CMD_MIFAREU_WRITEBL_COMPAT 0x0723
176
e9281ae8
JH
177#define CMD_MIFARE_CHKKEYS 0x0623
178
179#define CMD_MIFARE_SNIFFER 0x0630
5de79e20 180//ultralightC
181#define CMD_MIFAREUC_AUTH 0x0724
182//0x0725 and 0x0726 no longer used
183#define CMD_MIFAREUC_SETPWD 0x0727
184
185
186// mifare desfire
187#define CMD_MIFARE_DESFIRE_READBL 0x0728
188#define CMD_MIFARE_DESFIRE_WRITEBL 0x0729
189#define CMD_MIFARE_DESFIRE_AUTH1 0x072a
190#define CMD_MIFARE_DESFIRE_AUTH2 0x072b
191#define CMD_MIFARE_DES_READER 0x072c
192#define CMD_MIFARE_DESFIRE_INFO 0x072d
193#define CMD_MIFARE_DESFIRE 0x072e
194
195#define CMD_MIFARE_COLLECT_NONCES 0x072f
e9281ae8
JH
196
197#define CMD_UNKNOWN 0xFFFF
198
5de79e20 199
200//Mifare simulation flags
201#define FLAG_INTERACTIVE 0x01
202#define FLAG_4B_UID_IN_DATA 0x02
203#define FLAG_7B_UID_IN_DATA 0x04
204#define FLAG_NR_AR_ATTACK 0x08
205
206
207//Iclass reader flags
208#define FLAG_ICLASS_READER_ONLY_ONCE 0x01
209#define FLAG_ICLASS_READER_CC 0x02
210#define FLAG_ICLASS_READER_CSN 0x04
211#define FLAG_ICLASS_READER_CONF 0x08
212#define FLAG_ICLASS_READER_AA 0x10
213#define FLAG_ICLASS_READER_ONE_TRY 0x20
214
215
216
e9281ae8
JH
217// CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions:
218/* Whether a bootloader that understands the common_area is present */
219#define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0)
220
221/* Whether a osimage that understands the common_area is present */
222#define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1)
223
224/* Set if the bootloader is currently executing */
225#define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2)
226
227/* Set if the OS is currently executing */
228#define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3)
229
230/* Set if this device understands the extend start flash command */
231#define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4)
232
233/* CMD_START_FLASH may have three arguments: start of area to flash,
234 end of area to flash, optional magic.
235 The bootrom will not allow to overwrite itself unless this magic
236 is given as third parameter */
237
238#define START_FLASH_MAGIC 0x54494f44 // 'DOIT'
239
240#endif
Impressum, Datenschutz