[proxmark3-svn] / zlib / inffast.c

/* inffast.c -- fast decoding
 * Copyright (C) 1995-2008, 2010, 2013 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

#include "zutil.h"
#include "inftrees.h"
#include "inflate.h"
#include "inffast.h"

#ifndef ASMINF

/* Allow machine dependent optimization for post-increment or pre-increment.
   Based on testing to date,
   Pre-increment preferred for:
   - PowerPC G3 (Adler)
   - MIPS R5000 (Randers-Pehrson)
   Post-increment preferred for:
   - none
   No measurable difference:
   - Pentium III (Anderson)
   - M68060 (Nikl)
 */
#ifdef POSTINC
#  define OFF 0
#  define PUP(a) *(a)++
#else
#  define OFF 1
#  define PUP(a) *++(a)
#endif

/*
   Decode literal, length, and distance codes and write out the resulting
   literal and match bytes until either not enough input or output is
   available, an end-of-block is encountered, or a data error is encountered.
   When large enough input and output buffers are supplied to inflate(), for
   example, a 16K input buffer and a 64K output buffer, more than 95% of the
   inflate execution time is spent in this routine.

   Entry assumptions:

        state->mode == LEN
        strm->avail_in >= 6
        strm->avail_out >= 258
        start >= strm->avail_out
        state->bits < 8

   On return, state->mode is one of:

        LEN -- ran out of enough output space or enough available input
        TYPE -- reached end of block code, inflate() to interpret next block
        BAD -- error in block data

   Notes:

    - The maximum input bits used by a length/distance pair is 15 bits for the
      length code, 5 bits for the length extra, 15 bits for the distance code,
      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
      Therefore if strm->avail_in >= 6, then there is enough input to avoid
      checking for available input while decoding.

    - The maximum bytes that a single length/distance pair can output is 258
      bytes, which is the maximum length that can be coded.  inflate_fast()
      requires strm->avail_out >= 258 for each loop to avoid checking for
      output space.
 */
void ZLIB_INTERNAL inflate_fast(strm, start)
z_streamp strm;
unsigned start;         /* inflate()'s starting value for strm->avail_out */
{
    struct inflate_state FAR *state;
    z_const unsigned char FAR *in;      /* local strm->next_in */
    z_const unsigned char FAR *last;    /* have enough input while in < last */
    unsigned char FAR *out;     /* local strm->next_out */
    unsigned char FAR *beg;     /* inflate()'s initial strm->next_out */
    unsigned char FAR *end;     /* while out < end, enough space available */
#ifdef INFLATE_STRICT
    unsigned dmax;              /* maximum distance from zlib header */
#endif
    unsigned wsize;             /* window size or zero if not using window */
    unsigned whave;             /* valid bytes in the window */
    unsigned wnext;             /* window write index */
    unsigned char FAR *window;  /* allocated sliding window, if wsize != 0 */
    unsigned long hold;         /* local strm->hold */
    unsigned bits;              /* local strm->bits */
    code const FAR *lcode;      /* local strm->lencode */
    code const FAR *dcode;      /* local strm->distcode */
    unsigned lmask;             /* mask for first level of length codes */
    unsigned dmask;             /* mask for first level of distance codes */
    code here;                  /* retrieved table entry */
    unsigned op;                /* code bits, operation, extra bits, or */
                                /*  window position, window bytes to copy */
    unsigned len;               /* match length, unused bytes */
    unsigned dist;              /* match distance */
    unsigned char FAR *from;    /* where to copy match from */

    /* copy state to local variables */
    state = (struct inflate_state FAR *)strm->state;
    in = strm->next_in - OFF;
    last = in + (strm->avail_in - 5);
    out = strm->next_out - OFF;
    beg = out - (start - strm->avail_out);
    end = out + (strm->avail_out - 257);
#ifdef INFLATE_STRICT
    dmax = state->dmax;
#endif
    wsize = state->wsize;
    whave = state->whave;
    wnext = state->wnext;
    window = state->window;
    hold = state->hold;
    bits = state->bits;
    lcode = state->lencode;
    dcode = state->distcode;
    lmask = (1U << state->lenbits) - 1;
    dmask = (1U << state->distbits) - 1;

    /* decode literals and length/distances until end-of-block or not enough
       input data or output space */
    do {
        if (bits < 15) {
            hold += (unsigned long)(PUP(in)) << bits;
            bits += 8;
            hold += (unsigned long)(PUP(in)) << bits;
            bits += 8;
        }
        here = lcode[hold & lmask];
      dolen:
        op = (unsigned)(here.bits);
        hold >>= op;
        bits -= op;
        op = (unsigned)(here.op);
        if (op == 0) {                          /* literal */
            Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
                    "inflate:         literal '%c'\n" :
                    "inflate:         literal 0x%02x\n", here.val));
            PUP(out) = (unsigned char)(here.val);
        }
        else if (op & 16) {                     /* length base */
            len = (unsigned)(here.val);
            op &= 15;                           /* number of extra bits */
            if (op) {
                if (bits < op) {
                    hold += (unsigned long)(PUP(in)) << bits;
                    bits += 8;
                }
                len += (unsigned)hold & ((1U << op) - 1);
                hold >>= op;
                bits -= op;
            }
            Tracevv((stderr, "inflate:         length %u\n", len));
            if (bits < 15) {
                hold += (unsigned long)(PUP(in)) << bits;
                bits += 8;
                hold += (unsigned long)(PUP(in)) << bits;
                bits += 8;
            }
            here = dcode[hold & dmask];
          dodist:
            op = (unsigned)(here.bits);
            hold >>= op;
            bits -= op;
            op = (unsigned)(here.op);
            if (op & 16) {                      /* distance base */
                dist = (unsigned)(here.val);
                op &= 15;                       /* number of extra bits */
                if (bits < op) {
                    hold += (unsigned long)(PUP(in)) << bits;
                    bits += 8;
                    if (bits < op) {
                        hold += (unsigned long)(PUP(in)) << bits;
                        bits += 8;
                    }
                }
                dist += (unsigned)hold & ((1U << op) - 1);
#ifdef INFLATE_STRICT
                if (dist > dmax) {
                    strm->msg = (char *)"invalid distance too far back";
                    state->mode = BAD;
                    break;
                }
#endif
                hold >>= op;
                bits -= op;
                Tracevv((stderr, "inflate:         distance %u\n", dist));
                op = (unsigned)(out - beg);     /* max distance in output */
                if (dist > op) {                /* see if copy from window */
                    op = dist - op;             /* distance back in window */
                    if (op > whave) {
                        if (state->sane) {
                            strm->msg =
                                (char *)"invalid distance too far back";
                            state->mode = BAD;
                            break;
                        }
#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
                        if (len <= op - whave) {
                            do {
                                PUP(out) = 0;
                            } while (--len);
                            continue;
                        }
                        len -= op - whave;
                        do {
                            PUP(out) = 0;
                        } while (--op > whave);
                        if (op == 0) {
                            from = out - dist;
                            do {
                                PUP(out) = PUP(from);
                            } while (--len);
                            continue;
                        }
#endif
                    }
                    from = window - OFF;
                    if (wnext == 0) {           /* very common case */
                        from += wsize - op;
                        if (op < len) {         /* some from window */
                            len -= op;
                            do {
                                PUP(out) = PUP(from);
                            } while (--op);
                            from = out - dist;  /* rest from output */
                        }
                    }
                    else if (wnext < op) {      /* wrap around window */
                        from += wsize + wnext - op;
                        op -= wnext;
                        if (op < len) {         /* some from end of window */
                            len -= op;
                            do {
                                PUP(out) = PUP(from);
                            } while (--op);
                            from = window - OFF;
                            if (wnext < len) {  /* some from start of window */
                                op = wnext;
                                len -= op;
                                do {
                                    PUP(out) = PUP(from);
                                } while (--op);
                                from = out - dist;      /* rest from output */
                            }
                        }
                    }
                    else {                      /* contiguous in window */
                        from += wnext - op;
                        if (op < len) {         /* some from window */
                            len -= op;
                            do {
                                PUP(out) = PUP(from);
                            } while (--op);
                            from = out - dist;  /* rest from output */
                        }
                    }
                    while (len > 2) {
                        PUP(out) = PUP(from);
                        PUP(out) = PUP(from);
                        PUP(out) = PUP(from);
                        len -= 3;
                    }
                    if (len) {
                        PUP(out) = PUP(from);
                        if (len > 1)
                            PUP(out) = PUP(from);
                    }
                }
                else {
                    from = out - dist;          /* copy direct from output */
                    do {                        /* minimum length is three */
                        PUP(out) = PUP(from);
                        PUP(out) = PUP(from);
                        PUP(out) = PUP(from);
                        len -= 3;
                    } while (len > 2);
                    if (len) {
                        PUP(out) = PUP(from);
                        if (len > 1)
                            PUP(out) = PUP(from);
                    }
                }
            }
            else if ((op & 64) == 0) {          /* 2nd level distance code */
                here = dcode[here.val + (hold & ((1U << op) - 1))];
                goto dodist;
            }
            else {
                strm->msg = (char *)"invalid distance code";
                state->mode = BAD;
                break;
            }
        }
        else if ((op & 64) == 0) {              /* 2nd level length code */
            here = lcode[here.val + (hold & ((1U << op) - 1))];
            goto dolen;
        }
        else if (op & 32) {                     /* end-of-block */
            Tracevv((stderr, "inflate:         end of block\n"));
            state->mode = TYPE;
            break;
        }
        else {
            strm->msg = (char *)"invalid literal/length code";
            state->mode = BAD;
            break;
        }
    } while (in < last && out < end);

    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
    len = bits >> 3;
    in -= len;
    bits -= len << 3;
    hold &= (1U << bits) - 1;

    /* update state and return */
    strm->next_in = in + OFF;
    strm->next_out = out + OFF;
    strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
    strm->avail_out = (unsigned)(out < end ?
                                 257 + (end - out) : 257 - (out - end));
    state->hold = hold;
    state->bits = bits;
    return;
}

/*
   inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
   - Using bit fields for code structure
   - Different op definition to avoid & for extra bits (do & for table bits)
   - Three separate decoding do-loops for direct, window, and wnext == 0
   - Special case for distance > 1 copies to do overlapped load and store copy
   - Explicit branch predictions (based on measured branch probabilities)
   - Deferring match copy and interspersed it with decoding subsequent codes
   - Swapping literal/length else
   - Swapping window/direct else
   - Larger unrolled copy loops (three is about right)
   - Moving len -= 3 statement into middle of loop
 */

#endif /* !ASMINF */
Commit	Line	Data
add4d470	1	/* inffast.c -- fast decoding
	2	* Copyright (C) 1995-2008, 2010, 2013 Mark Adler
	3	* For conditions of distribution and use, see copyright notice in zlib.h
	4	*/
	5
	6	#include "zutil.h"
	7	#include "inftrees.h"
	8	#include "inflate.h"
	9	#include "inffast.h"
	10
	11	#ifndef ASMINF
	12
	13	/* Allow machine dependent optimization for post-increment or pre-increment.
	14	Based on testing to date,
	15	Pre-increment preferred for:
	16	- PowerPC G3 (Adler)
	17	- MIPS R5000 (Randers-Pehrson)
	18	Post-increment preferred for:
	19	- none
	20	No measurable difference:
	21	- Pentium III (Anderson)
	22	- M68060 (Nikl)
	23	*/
	24	#ifdef POSTINC
	25	# define OFF 0
	26	# define PUP(a) *(a)++
	27	#else
	28	# define OFF 1
	29	# define PUP(a) *++(a)
	30	#endif
	31
	32	/*
	33	Decode literal, length, and distance codes and write out the resulting
	34	literal and match bytes until either not enough input or output is
	35	available, an end-of-block is encountered, or a data error is encountered.
	36	When large enough input and output buffers are supplied to inflate(), for
	37	example, a 16K input buffer and a 64K output buffer, more than 95% of the
	38	inflate execution time is spent in this routine.
	39
	40	Entry assumptions:
	41
	42	state->mode == LEN
	43	strm->avail_in >= 6
	44	strm->avail_out >= 258
	45	start >= strm->avail_out
	46	state->bits < 8
	47
	48	On return, state->mode is one of:
	49
	50	LEN -- ran out of enough output space or enough available input
	51	TYPE -- reached end of block code, inflate() to interpret next block
	52	BAD -- error in block data
	53
	54	Notes:
	55
	56	- The maximum input bits used by a length/distance pair is 15 bits for the
	57	length code, 5 bits for the length extra, 15 bits for the distance code,
	58	and 13 bits for the distance extra. This totals 48 bits, or six bytes.
	59	Therefore if strm->avail_in >= 6, then there is enough input to avoid
	60	checking for available input while decoding.
	61
	62	- The maximum bytes that a single length/distance pair can output is 258
	63	bytes, which is the maximum length that can be coded. inflate_fast()
	64	requires strm->avail_out >= 258 for each loop to avoid checking for
65	output space.
66	*/
67	void ZLIB_INTERNAL inflate_fast(strm, start)
68	z_streamp strm;
69	unsigned start; /* inflate()'s starting value for strm->avail_out */
70	{
71	struct inflate_state FAR *state;
72	z_const unsigned char FAR in; / local strm->next_in */
73	z_const unsigned char FAR last; / have enough input while in < last */
74	unsigned char FAR out; / local strm->next_out */
75	unsigned char FAR beg; / inflate()'s initial strm->next_out */
76	unsigned char FAR end; / while out < end, enough space available */
77	#ifdef INFLATE_STRICT
78	unsigned dmax; /* maximum distance from zlib header */
79	#endif
80	unsigned wsize; /* window size or zero if not using window */
81	unsigned whave; /* valid bytes in the window */
82	unsigned wnext; /* window write index */
83	unsigned char FAR window; / allocated sliding window, if wsize != 0 */
84	unsigned long hold; /* local strm->hold */
85	unsigned bits; /* local strm->bits */
86	code const FAR lcode; / local strm->lencode */
87	code const FAR dcode; / local strm->distcode */
88	unsigned lmask; /* mask for first level of length codes */
89	unsigned dmask; /* mask for first level of distance codes */
90	code here; /* retrieved table entry */
91	unsigned op; /* code bits, operation, extra bits, or */
92	/* window position, window bytes to copy */
93	unsigned len; /* match length, unused bytes */
94	unsigned dist; /* match distance */
95	unsigned char FAR from; / where to copy match from */
96
97	/* copy state to local variables */
98	state = (struct inflate_state FAR *)strm->state;
99	in = strm->next_in - OFF;
100	last = in + (strm->avail_in - 5);
101	out = strm->next_out - OFF;
102	beg = out - (start - strm->avail_out);
103	end = out + (strm->avail_out - 257);
104	#ifdef INFLATE_STRICT
105	dmax = state->dmax;
106	#endif
107	wsize = state->wsize;
108	whave = state->whave;
109	wnext = state->wnext;
110	window = state->window;
111	hold = state->hold;
112	bits = state->bits;
113	lcode = state->lencode;
114	dcode = state->distcode;
115	lmask = (1U << state->lenbits) - 1;
116	dmask = (1U << state->distbits) - 1;
117
118	/* decode literals and length/distances until end-of-block or not enough
119	input data or output space */
120	do {
121	if (bits < 15) {
122	hold += (unsigned long)(PUP(in)) << bits;
123	bits += 8;
124	hold += (unsigned long)(PUP(in)) << bits;
125	bits += 8;
126	}
127	here = lcode[hold & lmask];
128	dolen:
129	op = (unsigned)(here.bits);
130	hold >>= op;
131	bits -= op;
132	op = (unsigned)(here.op);
133	if (op == 0) { /* literal */
134	Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
135	"inflate: literal '%c'\n" :
136	"inflate: literal 0x%02x\n", here.val));
137	PUP(out) = (unsigned char)(here.val);
138	}
139	else if (op & 16) { /* length base */
140	len = (unsigned)(here.val);
141	op &= 15; /* number of extra bits */
142	if (op) {
143	if (bits < op) {
144	hold += (unsigned long)(PUP(in)) << bits;
145	bits += 8;
146	}
147	len += (unsigned)hold & ((1U << op) - 1);
148	hold >>= op;
149	bits -= op;
150	}
151	Tracevv((stderr, "inflate: length %u\n", len));
152	if (bits < 15) {
153	hold += (unsigned long)(PUP(in)) << bits;
154	bits += 8;
155	hold += (unsigned long)(PUP(in)) << bits;
156	bits += 8;
157	}
158	here = dcode[hold & dmask];
159	dodist:
160	op = (unsigned)(here.bits);
161	hold >>= op;
162	bits -= op;
163	op = (unsigned)(here.op);
164	if (op & 16) { /* distance base */
165	dist = (unsigned)(here.val);
166	op &= 15; /* number of extra bits */
167	if (bits < op) {
168	hold += (unsigned long)(PUP(in)) << bits;
169	bits += 8;
170	if (bits < op) {
171	hold += (unsigned long)(PUP(in)) << bits;
172	bits += 8;
173	}
174	}
175	dist += (unsigned)hold & ((1U << op) - 1);
176	#ifdef INFLATE_STRICT
177	if (dist > dmax) {
178	strm->msg = (char *)"invalid distance too far back";
179	state->mode = BAD;
180	break;
181	}
182	#endif
183	hold >>= op;
184	bits -= op;
185	Tracevv((stderr, "inflate: distance %u\n", dist));
186	op = (unsigned)(out - beg); /* max distance in output */
187	if (dist > op) { /* see if copy from window */
188	op = dist - op; /* distance back in window */
189	if (op > whave) {
190	if (state->sane) {
191	strm->msg =
192	(char *)"invalid distance too far back";
193	state->mode = BAD;
194	break;
195	}
196	#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
197	if (len <= op - whave) {
198	do {
199	PUP(out) = 0;
200	} while (--len);
201	continue;
202	}
203	len -= op - whave;
204	do {
205	PUP(out) = 0;
206	} while (--op > whave);
207	if (op == 0) {
208	from = out - dist;
209	do {
210	PUP(out) = PUP(from);
211	} while (--len);
212	continue;
213	}
214	#endif
215	}
216	from = window - OFF;
217	if (wnext == 0) { /* very common case */
218	from += wsize - op;
219	if (op < len) { /* some from window */
220	len -= op;
221	do {
222	PUP(out) = PUP(from);
223	} while (--op);
224	from = out - dist; /* rest from output */
225	}
226	}
227	else if (wnext < op) { /* wrap around window */
228	from += wsize + wnext - op;
229	op -= wnext;
230	if (op < len) { /* some from end of window */
231	len -= op;
232	do {
233	PUP(out) = PUP(from);
234	} while (--op);
235	from = window - OFF;
236	if (wnext < len) { /* some from start of window */
237	op = wnext;
238	len -= op;
239	do {
240	PUP(out) = PUP(from);
241	} while (--op);
242	from = out - dist; /* rest from output */
243	}
244	}
245	}
246	else { /* contiguous in window */
247	from += wnext - op;
248	if (op < len) { /* some from window */
249	len -= op;
250	do {
251	PUP(out) = PUP(from);
252	} while (--op);
253	from = out - dist; /* rest from output */
254	}
255	}
256	while (len > 2) {
257	PUP(out) = PUP(from);
258	PUP(out) = PUP(from);
259	PUP(out) = PUP(from);
260	len -= 3;
261	}
262	if (len) {
263	PUP(out) = PUP(from);
264	if (len > 1)
265	PUP(out) = PUP(from);
266	}
267	}
268	else {
269	from = out - dist; /* copy direct from output */
270	do { /* minimum length is three */
271	PUP(out) = PUP(from);
272	PUP(out) = PUP(from);
273	PUP(out) = PUP(from);
274	len -= 3;
275	} while (len > 2);
276	if (len) {
277	PUP(out) = PUP(from);
278	if (len > 1)
279	PUP(out) = PUP(from);
280	}
281	}
282	}
283	else if ((op & 64) == 0) { /* 2nd level distance code */
284	here = dcode[here.val + (hold & ((1U << op) - 1))];
285	goto dodist;
286	}
287	else {
288	strm->msg = (char *)"invalid distance code";
289	state->mode = BAD;
290	break;
291	}
292	}
293	else if ((op & 64) == 0) { /* 2nd level length code */
294	here = lcode[here.val + (hold & ((1U << op) - 1))];
295	goto dolen;
296	}
297	else if (op & 32) { /* end-of-block */
298	Tracevv((stderr, "inflate: end of block\n"));
299	state->mode = TYPE;
300	break;
301	}
302	else {
303	strm->msg = (char *)"invalid literal/length code";
304	state->mode = BAD;
305	break;
306	}
307	} while (in < last && out < end);
308
309	/* return unused bytes (on entry, bits < 8, so in won't go too far back) */
310	len = bits >> 3;
311	in -= len;
312	bits -= len << 3;
313	hold &= (1U << bits) - 1;
314
315	/* update state and return */
316	strm->next_in = in + OFF;
317	strm->next_out = out + OFF;
318	strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
319	strm->avail_out = (unsigned)(out < end ?
320	257 + (end - out) : 257 - (out - end));
321	state->hold = hold;
322	state->bits = bits;
323	return;
324	}
325
326	/*
327	inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
328	- Using bit fields for code structure
329	- Different op definition to avoid & for extra bits (do & for table bits)
330	- Three separate decoding do-loops for direct, window, and wnext == 0
331	- Special case for distance > 1 copies to do overlapped load and store copy
332	- Explicit branch predictions (based on measured branch probabilities)
333	- Deferring match copy and interspersed it with decoding subsequent codes
334	- Swapping literal/length else
335	- Swapping window/direct else
336	- Larger unrolled copy loops (three is about right)
337	- Moving len -= 3 statement into middle of loop
338	*/
339
340	#endif /* !ASMINF */