[proxmark3-svn] / common / protocols.h

#ifndef PROTOCOLS_H
#define PROTOCOLS_H

//The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501
/*
ISO14443A (usually NFC tags)
	26 (7bits) = REQA
	30 = Read (usage: 30+1byte block number+2bytes ISO14443A-CRC - answer: 16bytes)
	A2 = Write (usage: A2+1byte block number+4bytes data+2bytes ISO14443A-CRC - answer: 0A [ACK] or 00 [NAK])
	52 (7bits) = WUPA (usage: 52(7bits) - answer: 2bytes ATQA)
	93 20 = Anticollision (usage: 9320 - answer: 4bytes UID+1byte UID-bytes-xor)
	93 70 = Select (usage: 9370+5bytes 9320 answer - answer: 1byte SAK)
	95 20 = Anticollision of cascade level2
	95 70 = Select of cascade level2
	50 00 = Halt (usage: 5000+2bytes ISO14443A-CRC - no answer from card)
Mifare
	60 = Authenticate with KeyA
	61 = Authenticate with KeyB
	40 (7bits) = Used to put Chinese Changeable UID cards in special mode (must be followed by 43 (8bits) - answer: 0A)
	C0 = Decrement
	C1 = Increment
	C2 = Restore
	B0 = Transfer
Ultralight C
	A0 = Compatibility Write (to accomodate MIFARE commands)
	1A = Step1 Authenticate
	AF = Step2 Authenticate


ISO14443B
	05 = REQB
	1D = ATTRIB
	50 = HALT
SRIX4K (tag does not respond to 05)
	06 00 = INITIATE
	0E xx = SELECT ID (xx = Chip-ID)
	0B = Get UID
	08 yy = Read Block (yy = block number)
	09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
	0C = Reset to Inventory
	0F = Completion
	0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)


ISO15693
	MANDATORY COMMANDS (all ISO15693 tags must support those)
		01 = Inventory (usage: 260100+2bytes ISO15693-CRC - answer: 12bytes)
		02 = Stay Quiet
	OPTIONAL COMMANDS (not all tags support them)
		20 = Read Block (usage: 0220+1byte block number+2bytes ISO15693-CRC - answer: 4bytes)
		21 = Write Block (usage: 0221+1byte block number+4bytes data+2bytes ISO15693-CRC - answer: 4bytes)
		22 = Lock Block
		23 = Read Multiple Blocks (usage: 0223+1byte 1st block to read+1byte last block to read+2bytes ISO15693-CRC)
		25 = Select
		26 = Reset to Ready
		27 = Write AFI
		28 = Lock AFI
		29 = Write DSFID
		2A = Lock DSFID
		2B = Get_System_Info (usage: 022B+2bytes ISO15693-CRC - answer: 14 or more bytes)
		2C = Read Multiple Block Security Status (usage: 022C+1byte 1st block security to read+1byte last block security to read+2bytes ISO15693-CRC)

EM Microelectronic CUSTOM COMMANDS
	A5 = Active EAS (followed by 1byte IC Manufacturer code+1byte EAS type)
	A7 = Write EAS ID (followed by 1byte IC Manufacturer code+2bytes EAS value)
	B8 = Get Protection Status for a specific block (followed by 1byte IC Manufacturer code+1byte block number+1byte of how many blocks after the previous is needed the info)
	E4 = Login (followed by 1byte IC Manufacturer code+4bytes password)
NXP/Philips CUSTOM COMMANDS
	A0 = Inventory Read
	A1 = Fast Inventory Read
	A2 = Set EAS
	A3 = Reset EAS
	A4 = Lock EAS
	A5 = EAS Alarm
	A6 = Password Protect EAS
	A7 = Write EAS ID
	A8 = Read EPC
	B0 = Inventory Page Read
	B1 = Fast Inventory Page Read
	B2 = Get Random Number
	B3 = Set Password
	B4 = Write Password
	B5 = Lock Password
	B6 = Bit Password Protection
	B7 = Lock Page Protection Condition
	B8 = Get Multiple Block Protection Status
	B9 = Destroy SLI
	BA = Enable Privacy
	BB = 64bit Password Protection
	40 = Long Range CMD (Standard ISO/TR7003:1990)
		*/

#define ICLASS_CMD_ACTALL           0x0A
#define ICLASS_CMD_READ_OR_IDENTIFY 0x0C
#define ICLASS_CMD_SELECT           0x81
#define ICLASS_CMD_PAGESEL          0x84
#define ICLASS_CMD_READCHECK_KD     0x88
#define ICLASS_CMD_READCHECK_KC     0x18
#define ICLASS_CMD_CHECK            0x05
#define ICLASS_CMD_DETECT           0x0F
#define ICLASS_CMD_HALT             0x00
#define ICLASS_CMD_UPDATE           0x87
#define ICLASS_CMD_ACT              0x8E
#define ICLASS_CMD_READ4            0x06


#define ISO14443A_CMD_REQA       0x26
#define ISO14443A_CMD_WUPA       0x52
#define ISO14443A_CMD_ANTICOLL_OR_SELECT     0x93
#define ISO14443A_CMD_ANTICOLL_OR_SELECT_2   0x95
#define ISO14443A_CMD_ANTICOLL_OR_SELECT_3   0x97
#define ISO14443A_CMD_HALT       0x50
#define ISO14443A_CMD_RATS       0xE0

#define MIFARE_CMD_READBLOCK     0x30
#define MIFARE_CMD_WRITEBLOCK    0xA0
#define MIFARE_AUTH_KEYA         0x60
#define MIFARE_AUTH_KEYB         0x61
#define MIFARE_MAGICWUPC1        0x40
#define MIFARE_MAGICWUPC2        0x43
#define MIFARE_MAGICWIPEC        0x41
#define MIFARE_CMD_INC           0xC0
#define MIFARE_CMD_DEC           0xC1
#define MIFARE_CMD_RESTORE       0xC2
#define MIFARE_CMD_TRANSFER      0xB0

#define MIFARE_EV1_PERSONAL_UID  0x40
#define MIFARE_EV1_SETMODE       0x43

#define MIFARE_ULC_WRITE         0xA2
#define MIFARE_ULC_COMP_WRITE    MIFARE_CMD_WRITEBLOCK
#define MIFARE_ULC_AUTH_1        0x1A
#define MIFARE_ULC_AUTH_2        0xAF

#define MIFARE_ULEV1_AUTH        0x1B
#define MIFARE_ULEV1_VERSION     0x60
#define MIFARE_ULEV1_FASTREAD    0x3A
#define MIFARE_ULEV1_WRITE       0xA2
#define MIFARE_ULEV1_COMP_WRITE  MIFARE_CMD_WRITEBLOCK
#define MIFARE_ULEV1_READ_CNT    0x39
#define MIFARE_ULEV1_INCR_CNT    0xA5
#define MIFARE_ULEV1_READSIG     0x3C
#define MIFARE_ULEV1_CHECKTEAR   0x3E
#define MIFARE_ULEV1_VCSL        0x4B

// mifare 4bit card answers
#define CARD_ACK                 0x0A  // 1010 - ACK
#define CARD_NACK_NA             0x04  // 0100 - NACK, not allowed (command not allowed)
#define CARD_NACK_TR             0x05  // 0101 - NACK, transmission error


/**
06 00 = INITIATE
0E xx = SELECT ID (xx = Chip-ID)
0B = Get UID
08 yy = Read Block (yy = block number)
09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
0C = Reset to Inventory
0F = Completion
0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
**/

#define ISO14443B_REQB         0x05
#define ISO14443B_ATTRIB       0x1D
#define ISO14443B_HALT         0x50
#define ISO14443B_INITIATE     0x06
#define ISO14443B_SELECT       0x0E
#define ISO14443B_GET_UID      0x0B
#define ISO14443B_READ_BLK     0x08
#define ISO14443B_WRITE_BLK    0x09
#define ISO14443B_RESET        0x0C
#define ISO14443B_COMPLETION   0x0F
#define ISO14443B_AUTHENTICATE 0x0A

// ISO15693 COMMANDS
#define ISO15693_INVENTORY                   0x01
#define ISO15693_STAYQUIET                   0x02
#define ISO15693_READBLOCK                   0x20
#define ISO15693_WRITEBLOCK                  0x21
#define ISO15693_LOCKBLOCK                   0x22
#define ISO15693_READ_MULTI_BLOCK            0x23
#define ISO15693_SELECT                      0x25
#define ISO15693_RESET_TO_READY              0x26
#define ISO15693_WRITE_AFI                   0x27
#define ISO15693_LOCK_AFI                    0x28
#define ISO15693_WRITE_DSFID                 0x29
#define ISO15693_LOCK_DSFID                  0x2A
#define ISO15693_GET_SYSTEM_INFO             0x2B
#define ISO15693_READ_MULTI_SECSTATUS        0x2C

// ISO15693 REQUEST FLAGS
#define ISO15693_REQ_SUBCARRIER_TWO          (1<<0)
#define ISO15693_REQ_DATARATE_HIGH           (1<<1)
#define ISO15693_REQ_INVENTORY               (1<<2)
#define ISO15693_REQ_PROTOCOL_EXT            (1<<3) // RFU
#define ISO15693_REQ_OPTION                  (1<<6) // Command specific option selector
// when REQ_INVENTORY is not set
#define ISO15693_REQ_SELECT                  (1<<4) // only selected cards response
#define ISO15693_REQ_ADDRESS                 (1<<5) // this req contains an address
// when REQ_INVENTORY is set
#define ISO15693_REQINV_AFI                  (1<<4) // AFI Field is present
#define ISO15693_REQINV_SLOT1                (1<<5) // 1 Slot     (16 slots if not set)

// ISO15693 RESPONSE FLAGS
#define ISO15693_RES_ERROR                   (1<<0)
#define ISO15693_RES_EXT                     (1<<3) // Protocol Extention	

// ISO15693 RESPONSE ERROR CODES
#define ISO15693_NOERROR                     0x00
#define ISO15693_ERROR_CMD_NOT_SUP           0x01 // Command not supported
#define ISO15693_ERROR_CMD_NOT_REC           0x02 // Command not recognized (eg. parameter error)
#define ISO15693_ERROR_CMD_OPTION            0x03 // Command option not supported
#define ISO15693_ERROR_GENERIC               0x0F // No additional Info about this error
#define ISO15693_ERROR_BLOCK_UNAVAILABLE     0x10
#define ISO15693_ERROR_BLOCK_LOCKED_ALREADY  0x11 // cannot lock again
#define ISO15693_ERROR_BLOCK_LOCKED          0x12 // cannot be changed
#define ISO15693_ERROR_BLOCK_WRITE           0x13 // Writing was unsuccessful
#define ISO15693_ERROR_BLOCL_WRITELOCK       0x14 // Locking was unsuccessful


// Topaz command set:
#define	TOPAZ_REQA						0x26	// Request
#define	TOPAZ_WUPA						0x52	// WakeUp
#define	TOPAZ_RID						0x78	// Read ID
#define	TOPAZ_RALL						0x00	// Read All (all bytes)
#define	TOPAZ_READ						0x01	// Read (a single byte)
#define	TOPAZ_WRITE_E					0x53	// Write-with-erase (a single byte)
#define	TOPAZ_WRITE_NE					0x1a	// Write-no-erase (a single byte)
// additional commands for Dynamic Memory Model
#define TOPAZ_RSEG						0x10	// Read segment
#define TOPAZ_READ8						0x02	// Read (eight bytes)
#define TOPAZ_WRITE_E8					0x54	// Write-with-erase (eight bytes)
#define TOPAZ_WRITE_NE8					0x1B	// Write-no-erase (eight bytes)


#define ISO_14443A    0
#define ICLASS        1
#define ISO_14443B    2
#define TOPAZ         3
#define PROTO_MIFARE  4
#define ISO_7816_4    5
#define ISO_15693     6
#define ISO_14443_4   7


//-- Picopass fuses
#define FUSE_FPERS   0x80
#define FUSE_CODING1 0x40
#define FUSE_CODING0 0x20
#define FUSE_CRYPT1  0x10
#define FUSE_CRYPT0  0x08
#define FUSE_FPROD1  0x04
#define FUSE_FPROD0  0x02
#define FUSE_RA      0x01

// ISO 7816-4 Basic interindustry commands. For command APDU's.
#define ISO7816_ERASE_BINARY             0x0E
#define ISO7816_VERIFY                   0x20
#define ISO7816_MANAGE_CHANNEL           0x70
#define ISO7816_EXTERNAL_AUTHENTICATE    0x82
#define ISO7816_GET_CHALLENGE            0x84
#define ISO7816_INTERNAL_AUTHENTICATE    0x88
#define ISO7816_SELECT_FILE              0xA4
#define ISO7816_GET_PROCESSING_OPTIONS   0xA8
#define ISO7816_READ_BINARY              0xB0
#define ISO7816_READ_RECORDS             0xB2
#define ISO7816_GET_RESPONSE             0xC0
#define ISO7816_ENVELOPE                 0xC2
#define ISO7816_GET_DATA                 0xCA
#define ISO7816_WRITE_BINARY             0xD0
#define ISO7816_WRITE_RECORD             0xD2
#define ISO7816_UPDATE_BINARY            0xD6
#define ISO7816_PUT_DATA                 0xDA
#define ISO7816_UPDATE_DATA              0xDC
#define ISO7816_APPEND_RECORD            0xE2
// ISO7816-4	For response APDU's
#define ISO7816_OK                       0x9000
//	6x xx = ERROR
#define ISO7816_MAX_FRAME_SIZE           261


void printIclassDumpInfo(uint8_t* iclass_dump);
void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb);

/* T55x7 configuration register definitions */
#define T55x7_POR_DELAY             0x00000001
#define T55x7_ST_TERMINATOR         0x00000008
#define T55x7_PWD                   0x00000010
#define T55x7_MAXBLOCK_SHIFT        5
#define T55x7_AOR                   0x00000200
#define T55x7_PSKCF_RF_2            0
#define T55x7_PSKCF_RF_4            0x00000400
#define T55x7_PSKCF_RF_8            0x00000800
#define T55x7_MODULATION_DIRECT     0
#define T55x7_MODULATION_PSK1       0x00001000
#define T55x7_MODULATION_PSK2       0x00002000
#define T55x7_MODULATION_PSK3       0x00003000
#define T55x7_MODULATION_FSK1       0x00004000
#define T55x7_MODULATION_FSK2       0x00005000
#define T55x7_MODULATION_FSK1a      0x00006000
#define T55x7_MODULATION_FSK2a      0x00007000
#define T55x7_MODULATION_MANCHESTER 0x00008000
#define T55x7_MODULATION_BIPHASE    0x00010000
#define T55x7_MODULATION_DIPHASE    0x00018000
#define T55x7_X_MODE                0x00020000
#define T55x7_BITRATE_RF_8          0
#define T55x7_BITRATE_RF_16         0x00040000
#define T55x7_BITRATE_RF_32         0x00080000
#define T55x7_BITRATE_RF_40         0x000C0000
#define T55x7_BITRATE_RF_50         0x00100000
#define T55x7_BITRATE_RF_64         0x00140000
#define T55x7_BITRATE_RF_100        0x00180000
#define T55x7_BITRATE_RF_128        0x001C0000

/* T5555 (Q5) configuration register definitions */
#define T5555_ST_TERMINATOR         0x00000001
#define T5555_MAXBLOCK_SHIFT        0x00000001
#define T5555_MODULATION_MANCHESTER 0
#define T5555_MODULATION_PSK1       0x00000010
#define T5555_MODULATION_PSK2       0x00000020
#define T5555_MODULATION_PSK3       0x00000030
#define T5555_MODULATION_FSK1       0x00000040
#define T5555_MODULATION_FSK2       0x00000050
#define T5555_MODULATION_BIPHASE    0x00000060
#define T5555_MODULATION_DIRECT     0x00000070
#define T5555_INVERT_OUTPUT         0x00000080
#define T5555_PSK_RF_2              0
#define T5555_PSK_RF_4              0x00000100
#define T5555_PSK_RF_8              0x00000200
#define T5555_USE_PWD               0x00000400
#define T5555_USE_AOR               0x00000800
#define T5555_SET_BITRATE(x)        (((x-2)/2)<<12)
#define T5555_GET_BITRATE(x)        ((((x >> 12) & 0x3F)*2)+2)
#define T5555_BITRATE_SHIFT         12 //(RF=2n+2)   ie 64=2*0x1F+2   or n = (RF-2)/2
#define T5555_FAST_WRITE            0x00004000
#define T5555_PAGE_SELECT           0x00008000

#define T55XX_WRITE_TIMEOUT 1500

uint32_t GetT55xxClockBit(uint32_t clock);

// em4x05 & em4x69 chip configuration register definitions
#define EM4x05_GET_BITRATE(x)         (((x & 0x3F)*2)+2)
#define EM4x05_SET_BITRATE(x)         ((x-2)/2)
#define EM4x05_MODULATION_NRZ         0x00000000
#define EM4x05_MODULATION_MANCHESTER  0x00000040
#define EM4x05_MODULATION_BIPHASE     0x00000080
#define EM4x05_MODULATION_MILLER      0x000000C0 //not supported by all 4x05/4x69 chips
#define EM4x05_MODULATION_PSK1        0x00000100 //not supported by all 4x05/4x69 chips
#define EM4x05_MODULATION_PSK2        0x00000140 //not supported by all 4x05/4x69 chips
#define EM4x05_MODULATION_PSK3        0x00000180 //not supported by all 4x05/4x69 chips
#define EM4x05_MODULATION_FSK1        0x00000200 //not supported by all 4x05/4x69 chips
#define EM4x05_MODULATION_FSK2        0x00000240 //not supported by all 4x05/4x69 chips
#define EM4x05_PSK_RF_2               0
#define EM4x05_PSK_RF_4               0x00000400
#define EM4x05_PSK_RF_8               0x00000800
#define EM4x05_MAXBLOCK_SHIFT         14
#define EM4x05_FIRST_USER_BLOCK       5
#define EM4x05_SET_NUM_BLOCKS(x)      ((x+5-1)<<14) //# of blocks sent during default read mode
#define EM4x05_GET_NUM_BLOCKS(x)      (((x>>14) & 0xF)-5+1)
#define EM4x05_READ_LOGIN_REQ         1<<18
#define EM4x05_READ_HK_LOGIN_REQ      1<<19
#define EM4x05_WRITE_LOGIN_REQ        1<<20
#define EM4x05_WRITE_HK_LOGIN_REQ     1<<21
#define EM4x05_READ_AFTER_WRITE       1<<22
#define EM4x05_DISABLE_ALLOWED        1<<23
#define EM4x05_READER_TALK_FIRST      1<<24

#endif 
// PROTOCOLS_H
Commit	Line	Data
b67f7ec3 MHS	1	#ifndef PROTOCOLS_H
	2	#define PROTOCOLS_H
	3
	4	//The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501
	5	/*
	6	ISO14443A (usually NFC tags)
	7	26 (7bits) = REQA
	8	30 = Read (usage: 30+1byte block number+2bytes ISO14443A-CRC - answer: 16bytes)
	9	A2 = Write (usage: A2+1byte block number+4bytes data+2bytes ISO14443A-CRC - answer: 0A [ACK] or 00 [NAK])
	10	52 (7bits) = WUPA (usage: 52(7bits) - answer: 2bytes ATQA)
	11	93 20 = Anticollision (usage: 9320 - answer: 4bytes UID+1byte UID-bytes-xor)
	12	93 70 = Select (usage: 9370+5bytes 9320 answer - answer: 1byte SAK)
	13	95 20 = Anticollision of cascade level2
	14	95 70 = Select of cascade level2
	15	50 00 = Halt (usage: 5000+2bytes ISO14443A-CRC - no answer from card)
	16	Mifare
	17	60 = Authenticate with KeyA
	18	61 = Authenticate with KeyB
	19	40 (7bits) = Used to put Chinese Changeable UID cards in special mode (must be followed by 43 (8bits) - answer: 0A)
	20	C0 = Decrement
	21	C1 = Increment
	22	C2 = Restore
	23	B0 = Transfer
	24	Ultralight C
	25	A0 = Compatibility Write (to accomodate MIFARE commands)
	26	1A = Step1 Authenticate
	27	AF = Step2 Authenticate
	28
	29
	30	ISO14443B
	31	05 = REQB
	32	1D = ATTRIB
	33	50 = HALT
	34	SRIX4K (tag does not respond to 05)
	35	06 00 = INITIATE
	36	0E xx = SELECT ID (xx = Chip-ID)
	37	0B = Get UID
	38	08 yy = Read Block (yy = block number)
	39	09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
	40	0C = Reset to Inventory
	41	0F = Completion
	42	0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
	43
	44
	45	ISO15693
	46	MANDATORY COMMANDS (all ISO15693 tags must support those)
	47	01 = Inventory (usage: 260100+2bytes ISO15693-CRC - answer: 12bytes)
	48	02 = Stay Quiet
	49	OPTIONAL COMMANDS (not all tags support them)
	50	20 = Read Block (usage: 0220+1byte block number+2bytes ISO15693-CRC - answer: 4bytes)
	51	21 = Write Block (usage: 0221+1byte block number+4bytes data+2bytes ISO15693-CRC - answer: 4bytes)
	52	22 = Lock Block
	53	23 = Read Multiple Blocks (usage: 0223+1byte 1st block to read+1byte last block to read+2bytes ISO15693-CRC)
	54	25 = Select
	55	26 = Reset to Ready
	56	27 = Write AFI
	57	28 = Lock AFI
	58	29 = Write DSFID
	59	2A = Lock DSFID
	60	2B = Get_System_Info (usage: 022B+2bytes ISO15693-CRC - answer: 14 or more bytes)
	61	2C = Read Multiple Block Security Status (usage: 022C+1byte 1st block security to read+1byte last block security to read+2bytes ISO15693-CRC)
	62
	63	EM Microelectronic CUSTOM COMMANDS
	64	A5 = Active EAS (followed by 1byte IC Manufacturer code+1byte EAS type)
65	A7 = Write EAS ID (followed by 1byte IC Manufacturer code+2bytes EAS value)
66	B8 = Get Protection Status for a specific block (followed by 1byte IC Manufacturer code+1byte block number+1byte of how many blocks after the previous is needed the info)
67	E4 = Login (followed by 1byte IC Manufacturer code+4bytes password)
68	NXP/Philips CUSTOM COMMANDS
69	A0 = Inventory Read
70	A1 = Fast Inventory Read
71	A2 = Set EAS
72	A3 = Reset EAS
73	A4 = Lock EAS
74	A5 = EAS Alarm
75	A6 = Password Protect EAS
76	A7 = Write EAS ID
77	A8 = Read EPC
78	B0 = Inventory Page Read
79	B1 = Fast Inventory Page Read
80	B2 = Get Random Number
81	B3 = Set Password
82	B4 = Write Password
83	B5 = Lock Password
84	B6 = Bit Password Protection
85	B7 = Lock Page Protection Condition
86	B8 = Get Multiple Block Protection Status
87	B9 = Destroy SLI
88	BA = Enable Privacy
89	BB = 64bit Password Protection
90	40 = Long Range CMD (Standard ISO/TR7003:1990)
91	*/
92
93	#define ICLASS_CMD_ACTALL 0x0A
94	#define ICLASS_CMD_READ_OR_IDENTIFY 0x0C
95	#define ICLASS_CMD_SELECT 0x81
96	#define ICLASS_CMD_PAGESEL 0x84
97	#define ICLASS_CMD_READCHECK_KD 0x88
98	#define ICLASS_CMD_READCHECK_KC 0x18
99	#define ICLASS_CMD_CHECK 0x05
100	#define ICLASS_CMD_DETECT 0x0F
101	#define ICLASS_CMD_HALT 0x00
b82d8098	102	#define ICLASS_CMD_UPDATE 0x87
b67f7ec3 MHS	103	#define ICLASS_CMD_ACT 0x8E
	104	#define ICLASS_CMD_READ4 0x06
	105
	106
	107	#define ISO14443A_CMD_REQA 0x26
b67f7ec3 MHS	108	#define ISO14443A_CMD_WUPA 0x52
	109	#define ISO14443A_CMD_ANTICOLL_OR_SELECT 0x93
	110	#define ISO14443A_CMD_ANTICOLL_OR_SELECT_2 0x95
c872d8c1	111	#define ISO14443A_CMD_ANTICOLL_OR_SELECT_3 0x97
b67f7ec3 MHS	112	#define ISO14443A_CMD_HALT 0x50
	113	#define ISO14443A_CMD_RATS 0xE0
	114
b8dd1ef6	115	#define MIFARE_CMD_READBLOCK 0x30
	116	#define MIFARE_CMD_WRITEBLOCK 0xA0
	117	#define MIFARE_AUTH_KEYA 0x60
	118	#define MIFARE_AUTH_KEYB 0x61
	119	#define MIFARE_MAGICWUPC1 0x40
	120	#define MIFARE_MAGICWUPC2 0x43
	121	#define MIFARE_MAGICWIPEC 0x41
	122	#define MIFARE_CMD_INC 0xC0
	123	#define MIFARE_CMD_DEC 0xC1
	124	#define MIFARE_CMD_RESTORE 0xC2
	125	#define MIFARE_CMD_TRANSFER 0xB0
	126
	127	#define MIFARE_EV1_PERSONAL_UID 0x40
	128	#define MIFARE_EV1_SETMODE 0x43
	129
	130	#define MIFARE_ULC_WRITE 0xA2
	131	#define MIFARE_ULC_COMP_WRITE MIFARE_CMD_WRITEBLOCK
	132	#define MIFARE_ULC_AUTH_1 0x1A
	133	#define MIFARE_ULC_AUTH_2 0xAF
	134
	135	#define MIFARE_ULEV1_AUTH 0x1B
	136	#define MIFARE_ULEV1_VERSION 0x60
	137	#define MIFARE_ULEV1_FASTREAD 0x3A
	138	#define MIFARE_ULEV1_WRITE 0xA2
	139	#define MIFARE_ULEV1_COMP_WRITE MIFARE_CMD_WRITEBLOCK
	140	#define MIFARE_ULEV1_READ_CNT 0x39
	141	#define MIFARE_ULEV1_INCR_CNT 0xA5
	142	#define MIFARE_ULEV1_READSIG 0x3C
	143	#define MIFARE_ULEV1_CHECKTEAR 0x3E
	144	#define MIFARE_ULEV1_VCSL 0x4B
	145
	146	// mifare 4bit card answers
	147	#define CARD_ACK 0x0A // 1010 - ACK
	148	#define CARD_NACK_NA 0x04 // 0100 - NACK, not allowed (command not allowed)
	149	#define CARD_NACK_TR 0x05 // 0101 - NACK, transmission error
	150
b67f7ec3 MHS	151
	152	/**
	153	06 00 = INITIATE
	154	0E xx = SELECT ID (xx = Chip-ID)
	155	0B = Get UID
	156	08 yy = Read Block (yy = block number)
	157	09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
	158	0C = Reset to Inventory
	159	0F = Completion
	160	0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
	161	**/
	162
	163	#define ISO14443B_REQB 0x05
	164	#define ISO14443B_ATTRIB 0x1D
	165	#define ISO14443B_HALT 0x50
	166	#define ISO14443B_INITIATE 0x06
	167	#define ISO14443B_SELECT 0x0E
	168	#define ISO14443B_GET_UID 0x0B
	169	#define ISO14443B_READ_BLK 0x08
	170	#define ISO14443B_WRITE_BLK 0x09
	171	#define ISO14443B_RESET 0x0C
	172	#define ISO14443B_COMPLETION 0x0F
	173	#define ISO14443B_AUTHENTICATE 0x0A
	174
8c6cca0b	175	// ISO15693 COMMANDS
	176	#define ISO15693_INVENTORY 0x01
	177	#define ISO15693_STAYQUIET 0x02
	178	#define ISO15693_READBLOCK 0x20
	179	#define ISO15693_WRITEBLOCK 0x21
	180	#define ISO15693_LOCKBLOCK 0x22
	181	#define ISO15693_READ_MULTI_BLOCK 0x23
	182	#define ISO15693_SELECT 0x25
	183	#define ISO15693_RESET_TO_READY 0x26
	184	#define ISO15693_WRITE_AFI 0x27
	185	#define ISO15693_LOCK_AFI 0x28
	186	#define ISO15693_WRITE_DSFID 0x29
	187	#define ISO15693_LOCK_DSFID 0x2A
	188	#define ISO15693_GET_SYSTEM_INFO 0x2B
	189	#define ISO15693_READ_MULTI_SECSTATUS 0x2C
	190
	191	// ISO15693 REQUEST FLAGS
	192	#define ISO15693_REQ_SUBCARRIER_TWO (1<<0)
	193	#define ISO15693_REQ_DATARATE_HIGH (1<<1)
	194	#define ISO15693_REQ_INVENTORY (1<<2)
	195	#define ISO15693_REQ_PROTOCOL_EXT (1<<3) // RFU
	196	#define ISO15693_REQ_OPTION (1<<6) // Command specific option selector
	197	// when REQ_INVENTORY is not set
	198	#define ISO15693_REQ_SELECT (1<<4) // only selected cards response
	199	#define ISO15693_REQ_ADDRESS (1<<5) // this req contains an address
	200	// when REQ_INVENTORY is set
	201	#define ISO15693_REQINV_AFI (1<<4) // AFI Field is present
	202	#define ISO15693_REQINV_SLOT1 (1<<5) // 1 Slot (16 slots if not set)
	203
	204	// ISO15693 RESPONSE FLAGS
	205	#define ISO15693_RES_ERROR (1<<0)
	206	#define ISO15693_RES_EXT (1<<3) // Protocol Extention
	207
	208	// ISO15693 RESPONSE ERROR CODES
	209	#define ISO15693_NOERROR 0x00
	210	#define ISO15693_ERROR_CMD_NOT_SUP 0x01 // Command not supported
	211	#define ISO15693_ERROR_CMD_NOT_REC 0x02 // Command not recognized (eg. parameter error)
	212	#define ISO15693_ERROR_CMD_OPTION 0x03 // Command option not supported
	213	#define ISO15693_ERROR_GENERIC 0x0F // No additional Info about this error
	214	#define ISO15693_ERROR_BLOCK_UNAVAILABLE 0x10
	215	#define ISO15693_ERROR_BLOCK_LOCKED_ALREADY 0x11 // cannot lock again
	216	#define ISO15693_ERROR_BLOCK_LOCKED 0x12 // cannot be changed
	217	#define ISO15693_ERROR_BLOCK_WRITE 0x13 // Writing was unsuccessful
	218	#define ISO15693_ERROR_BLOCL_WRITELOCK 0x14 // Locking was unsuccessful
b67f7ec3 MHS	219
b67f7ec3 MHS	220
ee1eadee	221	// Topaz command set:
	222	#define TOPAZ_REQA 0x26 // Request
	223	#define TOPAZ_WUPA 0x52 // WakeUp
	224	#define TOPAZ_RID 0x78 // Read ID
	225	#define TOPAZ_RALL 0x00 // Read All (all bytes)
	226	#define TOPAZ_READ 0x01 // Read (a single byte)
	227	#define TOPAZ_WRITE_E 0x53 // Write-with-erase (a single byte)
	228	#define TOPAZ_WRITE_NE 0x1a // Write-no-erase (a single byte)
48ece4a7	229	// additional commands for Dynamic Memory Model
	230	#define TOPAZ_RSEG 0x10 // Read segment
	231	#define TOPAZ_READ8 0x02 // Read (eight bytes)
	232	#define TOPAZ_WRITE_E8 0x54 // Write-with-erase (eight bytes)
	233	#define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes)
ee1eadee	234
ee1eadee	235
43591e64	236	#define ISO_14443A 0
	237	#define ICLASS 1
	238	#define ISO_14443B 2
	239	#define TOPAZ 3
	240	#define PROTO_MIFARE 4
	241	#define ISO_7816_4 5
0d2624a0	242	#define ISO_15693 6
53fb848a	243	#define ISO_14443_4 7
0d2624a0	244
b67f7ec3	245
1defcf60 MHS	246	//-- Picopass fuses
	247	#define FUSE_FPERS 0x80
	248	#define FUSE_CODING1 0x40
	249	#define FUSE_CODING0 0x20
	250	#define FUSE_CRYPT1 0x10
	251	#define FUSE_CRYPT0 0x08
	252	#define FUSE_FPROD1 0x04
	253	#define FUSE_FPROD0 0x02
	254	#define FUSE_RA 0x01
	255
43591e64	256	// ISO 7816-4 Basic interindustry commands. For command APDU's.
43591e64	257	#define ISO7816_ERASE_BINARY 0x0E
43591e64	258	#define ISO7816_VERIFY 0x20
43591e64	259	#define ISO7816_MANAGE_CHANNEL 0x70
53fb848a	260	#define ISO7816_EXTERNAL_AUTHENTICATE 0x82
	261	#define ISO7816_GET_CHALLENGE 0x84
	262	#define ISO7816_INTERNAL_AUTHENTICATE 0x88
	263	#define ISO7816_SELECT_FILE 0xA4
	264	#define ISO7816_GET_PROCESSING_OPTIONS 0xA8
	265	#define ISO7816_READ_BINARY 0xB0
	266	#define ISO7816_READ_RECORDS 0xB2
6b5105be	267	#define ISO7816_GET_RESPONSE 0xC0
53fb848a	268	#define ISO7816_ENVELOPE 0xC2
	269	#define ISO7816_GET_DATA 0xCA
	270	#define ISO7816_WRITE_BINARY 0xD0
	271	#define ISO7816_WRITE_RECORD 0xD2
	272	#define ISO7816_UPDATE_BINARY 0xD6
	273	#define ISO7816_PUT_DATA 0xDA
	274	#define ISO7816_UPDATE_DATA 0xDC
	275	#define ISO7816_APPEND_RECORD 0xE2
43591e64	276	// ISO7816-4 For response APDU's
	277	#define ISO7816_OK 0x9000
	278	// 6x xx = ERROR
6b5105be	279	#define ISO7816_MAX_FRAME_SIZE 261
43591e64	280
	281
	282
1defcf60	283	void printIclassDumpInfo(uint8_t* iclass_dump);
bbd19bec	284	void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t max_blk, uint8_t app_areas, uint8_t *kb);
b67f7ec3	285
3606ac0a	286	/* T55x7 configuration register definitions */
9f669cb2	287	#define T55x7_POR_DELAY 0x00000001
	288	#define T55x7_ST_TERMINATOR 0x00000008
	289	#define T55x7_PWD 0x00000010
	290	#define T55x7_MAXBLOCK_SHIFT 5
	291	#define T55x7_AOR 0x00000200
	292	#define T55x7_PSKCF_RF_2 0
	293	#define T55x7_PSKCF_RF_4 0x00000400
	294	#define T55x7_PSKCF_RF_8 0x00000800
	295	#define T55x7_MODULATION_DIRECT 0
	296	#define T55x7_MODULATION_PSK1 0x00001000
	297	#define T55x7_MODULATION_PSK2 0x00002000
	298	#define T55x7_MODULATION_PSK3 0x00003000
	299	#define T55x7_MODULATION_FSK1 0x00004000
	300	#define T55x7_MODULATION_FSK2 0x00005000
	301	#define T55x7_MODULATION_FSK1a 0x00006000
	302	#define T55x7_MODULATION_FSK2a 0x00007000
	303	#define T55x7_MODULATION_MANCHESTER 0x00008000
	304	#define T55x7_MODULATION_BIPHASE 0x00010000
	305	#define T55x7_MODULATION_DIPHASE 0x00018000
b97311b1	306	#define T55x7_X_MODE 0x00020000
9f669cb2	307	#define T55x7_BITRATE_RF_8 0
	308	#define T55x7_BITRATE_RF_16 0x00040000
	309	#define T55x7_BITRATE_RF_32 0x00080000
	310	#define T55x7_BITRATE_RF_40 0x000C0000
	311	#define T55x7_BITRATE_RF_50 0x00100000
	312	#define T55x7_BITRATE_RF_64 0x00140000
	313	#define T55x7_BITRATE_RF_100 0x00180000
	314	#define T55x7_BITRATE_RF_128 0x001C0000
3606ac0a	315
3606ac0a	316	/* T5555 (Q5) configuration register definitions */
9f669cb2	317	#define T5555_ST_TERMINATOR 0x00000001
	318	#define T5555_MAXBLOCK_SHIFT 0x00000001
	319	#define T5555_MODULATION_MANCHESTER 0
	320	#define T5555_MODULATION_PSK1 0x00000010
	321	#define T5555_MODULATION_PSK2 0x00000020
	322	#define T5555_MODULATION_PSK3 0x00000030
	323	#define T5555_MODULATION_FSK1 0x00000040
	324	#define T5555_MODULATION_FSK2 0x00000050
	325	#define T5555_MODULATION_BIPHASE 0x00000060
	326	#define T5555_MODULATION_DIRECT 0x00000070
	327	#define T5555_INVERT_OUTPUT 0x00000080
	328	#define T5555_PSK_RF_2 0
	329	#define T5555_PSK_RF_4 0x00000100
	330	#define T5555_PSK_RF_8 0x00000200
	331	#define T5555_USE_PWD 0x00000400
	332	#define T5555_USE_AOR 0x00000800
4ab135c0	333	#define T5555_SET_BITRATE(x) (((x-2)/2)<<12)
4ab135c0	334	#define T5555_GET_BITRATE(x) ((((x >> 12) & 0x3F)*2)+2)
76346455	335	#define T5555_BITRATE_SHIFT 12 //(RF=2n+2) ie 64=2*0x1F+2 or n = (RF-2)/2
9f669cb2	336	#define T5555_FAST_WRITE 0x00004000
9f669cb2	337	#define T5555_PAGE_SELECT 0x00008000
3606ac0a	338
8b6abef5	339	#define T55XX_WRITE_TIMEOUT 1500
8b6abef5	340
3606ac0a	341	uint32_t GetT55xxClockBit(uint32_t clock);
3606ac0a	342
4ab135c0	343	// em4x05 & em4x69 chip configuration register definitions
	344	#define EM4x05_GET_BITRATE(x) (((x & 0x3F)*2)+2)
	345	#define EM4x05_SET_BITRATE(x) ((x-2)/2)
	346	#define EM4x05_MODULATION_NRZ 0x00000000
	347	#define EM4x05_MODULATION_MANCHESTER 0x00000040
	348	#define EM4x05_MODULATION_BIPHASE 0x00000080
	349	#define EM4x05_MODULATION_MILLER 0x000000C0 //not supported by all 4x05/4x69 chips
	350	#define EM4x05_MODULATION_PSK1 0x00000100 //not supported by all 4x05/4x69 chips
	351	#define EM4x05_MODULATION_PSK2 0x00000140 //not supported by all 4x05/4x69 chips
	352	#define EM4x05_MODULATION_PSK3 0x00000180 //not supported by all 4x05/4x69 chips
	353	#define EM4x05_MODULATION_FSK1 0x00000200 //not supported by all 4x05/4x69 chips
	354	#define EM4x05_MODULATION_FSK2 0x00000240 //not supported by all 4x05/4x69 chips
	355	#define EM4x05_PSK_RF_2 0
	356	#define EM4x05_PSK_RF_4 0x00000400
	357	#define EM4x05_PSK_RF_8 0x00000800
	358	#define EM4x05_MAXBLOCK_SHIFT 14
	359	#define EM4x05_FIRST_USER_BLOCK 5
	360	#define EM4x05_SET_NUM_BLOCKS(x) ((x+5-1)<<14) //# of blocks sent during default read mode
	361	#define EM4x05_GET_NUM_BLOCKS(x) (((x>>14) & 0xF)-5+1)
	362	#define EM4x05_READ_LOGIN_REQ 1<<18
	363	#define EM4x05_READ_HK_LOGIN_REQ 1<<19
	364	#define EM4x05_WRITE_LOGIN_REQ 1<<20
	365	#define EM4x05_WRITE_HK_LOGIN_REQ 1<<21
	366	#define EM4x05_READ_AFTER_WRITE 1<<22
	367	#define EM4x05_DISABLE_ALLOWED 1<<23
	368	#define EM4x05_READER_TALK_FIRST 1<<24
	369
3606ac0a	370	#endif
3606ac0a	371	// PROTOCOLS_H