]>
Commit | Line | Data |
---|---|---|
1ccdd4f6 | 1 | # proxmark3: the official Proxmark repository! |
770f7345 | 2 | |
b27c1909 W |
3 | The proxmark3 is a powerful general purpose RFID tool, the size of a deck |
4 | of cards, designed to snoop, listen and emulate everything from | |
1ccdd4f6 | 5 | **Low Frequency (125kHz)** to **High Frequency (13.56MHz)** tags. |
770f7345 | 6 | |
b27c1909 W |
7 | This repository contains enough software, logic (for the FPGA), and design |
8 | documentation for the hardware that you could, at least in theory, | |
9 | do something useful with a proxmark3. | |
10 | ||
1ccdd4f6 QP |
11 | ## Resources |
12 | ||
13 | * [This repository!](https://github.com/Proxmark/proxmark3) | |
14 | * [The Wiki](https://github.com/Proxmark/proxmark3/wiki) | |
15 | * [The GitHub Pages website](http://proxmark.github.io/proxmark3/) | |
16 | * [The Forum](http://www.proxmark.org/forum) | |
17 | * The IRC channel: irc.freenode.org #proxmark3 ([chat in your browser](http://webchat.freenode.net/?channels=#proxmark3)) | |
18 | * [The Homebrew formula repository](https://github.com/Proxmark/homebrew-proxmark3) | |
b27c1909 | 19 | |
1ccdd4f6 | 20 | ## Development |
b27c1909 W |
21 | |
22 | The tools required to build or run the project will vary depending on | |
1ccdd4f6 | 23 | your operating system. Please refer to [the wiki](https://github.com/Proxmark/proxmark3/wiki) for details. |
770f7345 | 24 | |
1ccdd4f6 | 25 | ## Obtaining hardware |
770f7345 | 26 | |
3e7df262 | 27 | The Proxmark3 is available for purchase (assembled and tested) from the |
b27c1909 | 28 | following locations: |
770f7345 | 29 | |
1ccdd4f6 | 30 | * [RyscCorp](https://proxmark3.com/) (US) |
d4d439a8 | 31 | * [Hackerwarehouse](https://hackerwarehouse.com/) (US) |
1ccdd4f6 QP |
32 | * [Elechouse](http://www.elechouse.com/) (HK) |
33 | * [Lab401](https://lab401.com/) (FR) | |
34 | * [RFxSecure](http://www.rfxsecure.com/) (SG) | |
35 | * [IceSQL](http://proxmark3.tictail.com/) (SE) | |
3e7df262 | 36 | |
b27c1909 | 37 | Most of the ultra-low-volume contract assemblers could put |
770f7345 | 38 | something like this together with a reasonable yield. A run of around |
39 | a dozen units is probably cost-effective. The BOM includes (possibly- | |
40 | outdated) component pricing, and everything is available from Digikey | |
41 | and the usual distributors. | |
42 | ||
43 | If you've never assembled a modern circuit board by hand, then this is | |
44 | not a good place to start. Some of the components (e.g. the crystals) | |
45 | must not be assembled with a soldering iron, and require hot air. | |
46 | ||
47 | The schematics are included; the component values given are not | |
48 | necessarily correct for all situations, but it should be possible to do | |
49 | nearly anything you would want with appropriate population options. | |
50 | ||
51 | The printed circuit board artwork is also available, as Gerbers and an | |
52 | Excellon drill file. | |
53 | ||
54 | ||
1ccdd4f6 | 55 | ## License |
770f7345 | 56 | |
57 | This program is free software; you can redistribute it and/or modify | |
58 | it under the terms of the GNU General Public License as published by | |
59 | the Free Software Foundation; either version 2 of the License, or | |
60 | (at your option) any later version. | |
61 | ||
62 | This program is distributed in the hope that it will be useful, | |
63 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
64 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
65 | GNU General Public License for more details. | |
66 | ||
67 | You should have received a copy of the GNU General Public License | |
68 | along with this program; if not, write to the Free Software | |
69 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
70 | ||
71 | ||
72 | Jonathan Westhues | |
73 | user jwesthues, at host cq.cx | |
74 | ||
75 | May 2007, Cambridge MA |