chg: lets not have it static, since I get the same nonce in the same session over...

[proxmark3-svn] / common / wiegand.c

//-----------------------------------------------------------------------------
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
// at your option, any later version. See the LICENSE.txt file for the text of
// the license.
//-----------------------------------------------------------------------------
// Wiegand functions
//-----------------------------------------------------------------------------

#include "wiegand.h"

/*
* @brief getParity
* @param bits     pointer to the source bitstream of binary values 0|1
* @param len      how long shall parity be calculated
* @param type     use the defined values  EVEN|ODD
* @return parity bit required to match type
*/
uint8_t getParity( uint8_t *bits, uint8_t len, uint8_t type ) {
    uint8_t x = 0;
    for(; len > 0; --len) 
        x += bits[len - 1];

    return (x & 1 ) ^ type;
}

// by marshmellow
/* pass bits to be tested in bits, length bits passed in bitLen, and parity type EVEN|ODD in type
* @brief checkParity
* @param bits     pointer to the source bitstream of binary values 0|1
* @param len      number of bits to be checked
* @param type     use the defined values  EVEN|ODD
* @return 1 if passed
*/
uint8_t checkParity(uint32_t bits, uint8_t len, uint8_t type);

// by marshmellow
// takes a array of binary values, start position, length of bits per parity (includes parity bit),
// Parity Type (1 for odd; 0 for even; 2 for Always 1's; 3 for Always 0's), and binary Length (length to run) 
size_t removeParity(uint8_t *bitstream, size_t startIdx, uint8_t pLen, uint8_t pType, size_t bLen) {
	uint32_t parityWd = 0;
	size_t j = 0, bitcount = 0;
	for (int word = 0; word < (bLen); word += pLen){
		for (int bit = 0; bit < pLen; ++bit){
			parityWd = (parityWd << 1) | bitstream[startIdx+word+bit];
			bitstream[j++] = (bitstream[startIdx + word + bit]);
		}
		j--; // overwrite parity with next data
		// if parity fails then return 0
		switch (pType) {
			case 3: if (bitstream[j] == 1) return 0; break; //should be 0 spacer bit
			case 2: if (bitstream[j] == 0) return 0; break; //should be 1 spacer bit
			default: //test parity
				if (parityTest(parityWd, pLen, pType) == 0) return 0; break;
		}
		bitcount += ( pLen - 1 );
		parityWd = 0;
	}
	// if we got here then all the parities passed
	//return ID start index and size
	return bitcount;
}


// by marshmellow
// takes a array of binary values, length of bits per parity (includes parity bit),
// Parity Type (1 for odd; 0 for even; 2 Always 1's; 3 Always 0's), and binary Length (length to run)
// Make sure *dest is long enough to store original sourceLen + #_of_parities_to_be_added
/*
* @brief addParity
* @param bits       pointer to the source bitstream of binary values
* @param dest       pointer to the destination where parities together with bits are added.
* @param sourceLen  number of 
* @param pLen       length bits to be checked
* @param pType      EVEN|ODD|2 (always 1's)|3 (always 0's)
* @return 
*/
size_t addParity(uint8_t *bits, uint8_t *dest, uint8_t sourceLen, uint8_t pLen, uint8_t pType)
{
	uint32_t parityWd = 0;
	size_t j = 0, bitCnt = 0;
	for (int word = 0; word < sourceLen; word += pLen-1) {
		for (int bit = 0; bit < pLen-1; ++bit){
			parityWd = (parityWd << 1) | bits[word+bit];
			dest[j++] = (bits[word+bit]);
		}
		
		// if parity fails then return 0
		switch (pType) {
			case 3: dest[j++] = 0; break; // marker bit which should be a 0
			case 2: dest[j++] = 1; break; // marker bit which should be a 1
			default: 
				dest[j++] = parityTest(parityWd, pLen-1, pType) ^ 1;
				break;
		}
		bitCnt += pLen;
		parityWd = 0;
	}
	// if we got here then all the parities passed
	//return ID start index and size
	return bitCnt;
}

// by marshmellow
/*
*  add HID parity to binary array: EVEN prefix for 1st half of ID, ODD suffix for 2nd half
* @brief wiegand_add_parity
* @param source  pointer to source of binary data
* @param dest    pointer to the destination where wiegandparity has been appended
* @param len     number of bits which wiegand parity shall be calculated over. This number is without parities, so a wiegand 26 has 24 bits of data
*/
void wiegand_add_parity(uint8_t *source, uint8_t *dest, uint8_t len) {

	// Copy to destination, shifted one step to make room for EVEN parity
    memcpy(dest+1, source, length);

	// half length, Even and Odd is calculated to the middle.
	uint8_t len_h2 = length >> 1;
	
	// add EVEN parity at the beginning
    *(dest) = GetParity(source, EVEN, len_h2);
	
    dest += length + 1;
	
	// add ODD parity at the very end
    *(dest) = GetParity(source + len_h2, ODD, len_h2);
}

//uint32_t bytebits_to_byte(uint8_t* src, size_t numbits);
#define MAX_BITS_TXX55 6*4*8
#define MAX_BYTES_TXX55 6*4	
/*
* @brief num_to_wiegand_bytes
* @param oem       Sometimes call FF Fixfield, SiteCode. Used in a few formats
* @param fc        Facility code 
* @param cn        Card number
* @param dest      pointer to the destination where wiegand bytes will be stored
* @param formatlen 
*/
void num_to_wiegand_bytes(uint64_t oem, uint64_t fc, uint64_t cn, uint8_t *dest, uint8_t formatlen){

	uint8_t data[MAX_BITS_TXX55] = {0};
	memset(data, 0, sizeof(data));
	
	num_to_wiegand_bits(oem, fc, cn, data, formatlen);
		
	// loop
	// (formatlen / 32 ) + 1
	// (formatlen >> 5) + 1
	for (int i = 0; i < formatlen ; ++i){
		uint32_t value  = bytebits_to_byte( data + (i * 32), 32);
		num_to_bytes(value, 32, dest + (i*4) );
	}
	
}
/*
* @brief num_to_wiegand_bits
* @param oem       Sometimes call FF Fixfield, SiteCode. Used in a few formats
* @param fc        Facility code 
* @param cn        Card number
* @param dest      pointer to the destination where wiegand bits will be stored
* @param formatlen 
*/
void num_to_wiegand_bits(uint64_t oem, uint64_t fc, uint64_t cn, uint8_t *dest, uint8_t formatlen){

	uint8_t bits[MAX_BITS_TXX55] = {0};
	memset(bits, 0, sizeof(bits));
	uint8_t *temp = bits;
	uint64_t value = 0;
	
	switch ( formatlen ){		
		case 26 :				// 26bit HID H10301
			fc &= 0xFF;			// 8bits
			cn &= 0xFFFF;		// 16bits
			value = fc << 16 | cn;
			num_to_bytebits(value, 24, temp);
			wiegand_add_parity(temp, dest, 24);
			break;
		case 261:				// 26bit Indala 
			fc &= 0xFFF;		// 12bits
			cn &= 0xFFF;		// 12bits
			value = fc << 12 | cn;
			num_to_bytebits(value, 24, temp);
			wiegand_add_parity(temp, dest, 24);	
			break;
		case 34 :				// 34bits HID
			fc &= 0xFFFF;		// 16bits
			cn &= 0xFFFF;		// 16bits
			value = fc << 16 | cn;
			num_to_bytebits(value, 32, temp);
			wiegand_add_parity(temp, dest, 32);	
			break;
		case 35 :				// 35bits HID
			fc &= 0xFFF;		// 12bits
			cn &= 0xFFFFFF;		// 20bits
			value = fc << 20 | cn;
			num_to_bytebits(value, 32, temp);
			wiegand_add_parity(temp, dest, 32);	
			break;
		case 37 : 				// H10304
			fc &= 0xFFFF;   	// 16bits
			cn &= 0x7FFFF;  	// 19bits
			value = fc << 19 | cn;
			num_to_bytebits(value, 35, temp);
			wiegand_add_parity(temp, dest, 35);
			break;
		case 39 :				// 39bit KERI System Pyramid
			fc &= 0x1FFFF;		// 17bits
			cn &= 0xFFFFFFFF;	// 20bits
			value = fc << 20 | cn;
			num_to_bytebits(value, 37, temp);
			wiegand_add_parity(temp, dest, 37);
			break;
		case 44 :				// 44bit KERI system Pyramid
			oem &= 0xFF;		// 8bits
			fc &= 0xFFF;		// 12bits
			cn &= 0xFFFFFFFF;	// 21bits
			value = oem << 20 | fc << 12 | cn;
			num_to_bytebits(value, 42, temp);
			wiegand_add_parity(temp, dest, 42);
			break;
		case 50 :				// AWID 50 RBH
			fc &= 0xFFFF;		// 16bits
			cn &= 0xFFFFFFFF	// 32bits
			value = fc << 32 | cn;
			num_to_bytebits(value, 48, temp);
			wiegand_add_parity(temp, dest, 48);  // verify!
			break;
		default:
			break;
	}
}