| | 1 | # Ports |
| | 2 | telnet_port 4444 |
| | 3 | gdb_port 3333 |
| | 4 | |
| | 5 | # Interface |
| | 6 | interface buspirate |
| | 7 | buspirate_port /dev/ttyUSB0 |
| | 8 | adapter_khz 1000 |
| | 9 | |
| | 10 | # Communication speed |
| | 11 | buspirate_speed normal # or fast |
| | 12 | |
| | 13 | # Voltage regulator: enabled = 1 or disabled = 0 |
| | 14 | buspirate_vreg 1 |
| | 15 | |
| | 16 | # Pin mode: normal or open-drain |
| | 17 | buspirate_mode normal |
| | 18 | |
| | 19 | # Pull-up state: enabled = 1 or disabled = 0 |
| | 20 | buspirate_pullup 1 |
| | 21 | |
| | 22 | # use combined on interfaces or targets that can't set TRST/SRST separately |
| | 23 | reset_config srst_only srst_pulls_trst |
| | 24 | |
| | 25 | jtag newtap sam7x cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x3f0f0f0f |
| | 26 | |
| | 27 | target create sam7x.cpu arm7tdmi -endian little -chain-position sam7x.cpu |
| | 28 | |
| | 29 | sam7x.cpu configure -event reset-init { |
| | 30 | soft_reset_halt |
| | 31 | mww 0xfffffd00 0xa5000004 # RSTC_CR: Reset peripherals |
| | 32 | mww 0xfffffd44 0x00008000 # WDT_MR: disable watchdog |
| | 33 | mww 0xfffffd08 0xa5000001 # RSTC_MR enable user reset |
| | 34 | mww 0xfffffc20 0x00005001 # CKGR_MOR : enable the main oscillator |
| | 35 | sleep 10 |
| | 36 | mww 0xfffffc2c 0x000b1c02 # CKGR_PLLR: 16MHz * 12/2 = 96MHz |
| | 37 | sleep 10 |
| | 38 | mww 0xfffffc30 0x00000007 # PMC_MCKR : MCK = PLL / 2 = 48 MHz |
| | 39 | sleep 10 |
| | 40 | mww 0xffffff60 0x00480100 # MC_FMR: flash mode (FWS=1,FMCN=72) |
| | 41 | sleep 100 |
| | 42 | |
| | 43 | } |
| | 44 | |
| | 45 | gdb_memory_map enable |
| | 46 | #gdb_breakpoint_override hard |
| | 47 | #armv4_5 core_state arm |
| | 48 | |
| | 49 | sam7x.cpu configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x10000 -work-area-backup 0 |
| | 50 | flash bank sam7x512.flash.0 at91sam7 0 0 0 0 sam7x.cpu 0 0 0 0 0 0 0 18432 |
| | 51 | flash bank sam7x512.flash.1 at91sam7 0 0 0 0 sam7x.cpu 1 0 0 0 0 0 0 18432 |
| | 52 | |
projects / proxmark3-svn / blame_incremental