| | 1 | //----------------------------------------------------------------------------- |
| | 2 | // Jonathan Westhues, Mar 2006 |
| | 3 | // Edits by Gerhard de Koning Gans, Sep 2007 |
| | 4 | // |
| | 5 | // This code is licensed to you under the terms of the GNU GPL, version 2 or, |
| | 6 | // at your option, any later version. See the LICENSE.txt file for the text of |
| | 7 | // the license. |
| | 8 | //----------------------------------------------------------------------------- |
| | 9 | // Definitions for all the types of commands that may be sent over USB; our |
| | 10 | // own protocol. |
| | 11 | //----------------------------------------------------------------------------- |
| | 12 | |
| | 13 | #ifndef __USB_CMD_H |
| | 14 | #define __USB_CMD_H |
| | 15 | #ifdef _MSC_VER |
| | 16 | typedef DWORD uint32_t; |
| | 17 | typedef BYTE uint8_t; |
| | 18 | #define PACKED |
| | 19 | // stuff |
| | 20 | #else |
| | 21 | #include <stdint.h> |
| | 22 | #include <stdbool.h> |
| | 23 | #define PACKED __attribute__((packed)) |
| | 24 | #endif |
| | 25 | |
| | 26 | #define USB_CMD_DATA_SIZE 512 |
| | 27 | |
| | 28 | typedef struct { |
| | 29 | uint64_t cmd; |
| | 30 | uint64_t arg[3]; |
| | 31 | union { |
| | 32 | uint8_t asBytes[USB_CMD_DATA_SIZE]; |
| | 33 | uint32_t asDwords[USB_CMD_DATA_SIZE/4]; |
| | 34 | } d; |
| | 35 | } PACKED UsbCommand; |
| | 36 | // A struct used to send sample-configs over USB |
| | 37 | typedef struct{ |
| | 38 | uint8_t decimation; |
| | 39 | uint8_t bits_per_sample; |
| | 40 | bool averaging; |
| | 41 | int divisor; |
| | 42 | int trigger_threshold; |
| | 43 | } sample_config; |
| | 44 | |
| | 45 | // For the bootloader |
| | 46 | #define CMD_DEVICE_INFO 0x0000 |
| | 47 | #define CMD_SETUP_WRITE 0x0001 |
| | 48 | #define CMD_FINISH_WRITE 0x0003 |
| | 49 | #define CMD_HARDWARE_RESET 0x0004 |
| | 50 | #define CMD_START_FLASH 0x0005 |
| | 51 | #define CMD_NACK 0x00fe |
| | 52 | #define CMD_ACK 0x00ff |
| | 53 | |
| | 54 | // For general mucking around |
| | 55 | #define CMD_DEBUG_PRINT_STRING 0x0100 |
| | 56 | #define CMD_DEBUG_PRINT_INTEGERS 0x0101 |
| | 57 | #define CMD_DEBUG_PRINT_BYTES 0x0102 |
| | 58 | #define CMD_LCD_RESET 0x0103 |
| | 59 | #define CMD_LCD 0x0104 |
| | 60 | #define CMD_BUFF_CLEAR 0x0105 |
| | 61 | #define CMD_READ_MEM 0x0106 |
| | 62 | #define CMD_VERSION 0x0107 |
| | 63 | |
| | 64 | // For low-frequency tags |
| | 65 | #define CMD_READ_TI_TYPE 0x0202 |
| | 66 | #define CMD_WRITE_TI_TYPE 0x0203 |
| | 67 | #define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204 |
| | 68 | #define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205 |
| | 69 | #define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206 |
| | 70 | #define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207 |
| | 71 | #define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208 |
| | 72 | #define CMD_DOWNLOADED_SIM_SAMPLES_125K 0x0209 |
| | 73 | #define CMD_SIMULATE_TAG_125K 0x020A |
| | 74 | #define CMD_HID_DEMOD_FSK 0x020B |
| | 75 | #define CMD_HID_SIM_TAG 0x020C |
| | 76 | #define CMD_SET_LF_DIVISOR 0x020D |
| | 77 | #define CMD_LF_SIMULATE_BIDIR 0x020E |
| | 78 | #define CMD_SET_ADC_MUX 0x020F |
| | 79 | #define CMD_HID_CLONE_TAG 0x0210 |
| | 80 | #define CMD_EM410X_WRITE_TAG 0x0211 |
| | 81 | #define CMD_INDALA_CLONE_TAG 0x0212 |
| | 82 | // for 224 bits UID |
| | 83 | #define CMD_INDALA_CLONE_TAG_L 0x0213 |
| | 84 | #define CMD_T55XX_READ_BLOCK 0x0214 |
| | 85 | #define CMD_T55XX_WRITE_BLOCK 0x0215 |
| | 86 | #define CMD_T55XX_READ_TRACE 0x0216 |
| | 87 | #define CMD_PCF7931_READ 0x0217 |
| | 88 | #define CMD_EM4X_READ_WORD 0x0218 |
| | 89 | #define CMD_EM4X_WRITE_WORD 0x0219 |
| | 90 | #define CMD_IO_DEMOD_FSK 0x021A |
| | 91 | #define CMD_IO_CLONE_TAG 0x021B |
| | 92 | #define CMD_EM410X_DEMOD 0x021c |
| | 93 | // Sampling configuration for LF reader/snooper |
| | 94 | #define CMD_SET_LF_SAMPLING_CONFIG 0x021d |
| | 95 | #define CMD_FSK_SIM_TAG 0x021E |
| | 96 | #define CMD_ASK_SIM_TAG 0x021F |
| | 97 | #define CMD_PSK_SIM_TAG 0x0220 |
| | 98 | #define CMD_AWID_DEMOD_FSK 0x0221 |
| | 99 | |
| | 100 | /* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */ |
| | 101 | |
| | 102 | // For the 13.56 MHz tags |
| | 103 | #define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300 |
| | 104 | #define CMD_READ_SRI512_TAG 0x0303 |
| | 105 | #define CMD_READ_SRIX4K_TAG 0x0304 |
| | 106 | #define CMD_ISO_14443B_COMMAND 0x0305 |
| | 107 | #define CMD_READER_ISO_15693 0x0310 |
| | 108 | #define CMD_SIMTAG_ISO_15693 0x0311 |
| | 109 | #define CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 0x0312 |
| | 110 | #define CMD_ISO_15693_COMMAND 0x0313 |
| | 111 | #define CMD_ISO_15693_COMMAND_DONE 0x0314 |
| | 112 | #define CMD_ISO_15693_FIND_AFI 0x0315 |
| | 113 | #define CMD_ISO_15693_DEBUG 0x0316 |
| | 114 | #define CMD_LF_SNOOP_RAW_ADC_SAMPLES 0x0317 |
| | 115 | |
| | 116 | // For Hitag2 transponders |
| | 117 | #define CMD_SNOOP_HITAG 0x0370 |
| | 118 | #define CMD_SIMULATE_HITAG 0x0371 |
| | 119 | #define CMD_READER_HITAG 0x0372 |
| | 120 | |
| | 121 | #define CMD_SIMULATE_TAG_ISO_14443B 0x0381 |
| | 122 | #define CMD_SNOOP_ISO_14443B 0x0382 |
| | 123 | #define CMD_SNOOP_ISO_14443a 0x0383 |
| | 124 | #define CMD_SIMULATE_TAG_ISO_14443a 0x0384 |
| | 125 | #define CMD_READER_ISO_14443a 0x0385 |
| | 126 | #define CMD_SIMULATE_TAG_LEGIC_RF 0x0387 |
| | 127 | #define CMD_READER_LEGIC_RF 0x0388 |
| | 128 | #define CMD_WRITER_LEGIC_RF 0x0389 |
| | 129 | #define CMD_EPA_PACE_COLLECT_NONCE 0x038A |
| | 130 | #define CMD_EPA_PACE_REPLAY 0x038B |
| | 131 | |
| | 132 | #define CMD_ICLASS_READCHECK 0x038F |
| | 133 | #define CMD_ICLASS_CLONE 0x0390 |
| | 134 | #define CMD_ICLASS_DUMP 0x0391 |
| | 135 | #define CMD_SNOOP_ICLASS 0x0392 |
| | 136 | #define CMD_SIMULATE_TAG_ICLASS 0x0393 |
| | 137 | #define CMD_READER_ICLASS 0x0394 |
| | 138 | #define CMD_READER_ICLASS_REPLAY 0x0395 |
| | 139 | #define CMD_ICLASS_READBLOCK 0x0396 |
| | 140 | #define CMD_ICLASS_WRITEBLOCK 0x0397 |
| | 141 | #define CMD_ICLASS_EML_MEMSET 0x0398 |
| | 142 | #define CMD_ICLASS_AUTHENTICATION 0x0399 |
| | 143 | |
| | 144 | // For measurements of the antenna tuning |
| | 145 | #define CMD_MEASURE_ANTENNA_TUNING 0x0400 |
| | 146 | #define CMD_MEASURE_ANTENNA_TUNING_HF 0x0401 |
| | 147 | #define CMD_MEASURED_ANTENNA_TUNING 0x0410 |
| | 148 | #define CMD_LISTEN_READER_FIELD 0x0420 |
| | 149 | |
| | 150 | // For direct FPGA control |
| | 151 | #define CMD_FPGA_MAJOR_MODE_OFF 0x0500 |
| | 152 | |
| | 153 | // For mifare commands |
| | 154 | #define CMD_MIFARE_SET_DBGMODE 0x0600 |
| | 155 | #define CMD_MIFARE_EML_MEMCLR 0x0601 |
| | 156 | #define CMD_MIFARE_EML_MEMSET 0x0602 |
| | 157 | #define CMD_MIFARE_EML_MEMGET 0x0603 |
| | 158 | #define CMD_MIFARE_EML_CARDLOAD 0x0604 |
| | 159 | |
| | 160 | // magic chinese card commands |
| | 161 | #define CMD_MIFARE_CSETBLOCK 0x0605 |
| | 162 | #define CMD_MIFARE_CGETBLOCK 0x0606 |
| | 163 | #define CMD_MIFARE_CIDENT 0x0607 |
| | 164 | |
| | 165 | #define CMD_SIMULATE_MIFARE_CARD 0x0610 |
| | 166 | |
| | 167 | #define CMD_READER_MIFARE 0x0611 |
| | 168 | #define CMD_MIFARE_NESTED 0x0612 |
| | 169 | |
| | 170 | #define CMD_MIFARE_READBL 0x0620 |
| | 171 | #define CMD_MIFAREU_READBL 0x0720 |
| | 172 | #define CMD_MIFARE_READSC 0x0621 |
| | 173 | #define CMD_MIFAREU_READCARD 0x0721 |
| | 174 | #define CMD_MIFARE_WRITEBL 0x0622 |
| | 175 | #define CMD_MIFAREU_WRITEBL 0x0722 |
| | 176 | #define CMD_MIFAREU_WRITEBL_COMPAT 0x0723 |
| | 177 | |
| | 178 | #define CMD_MIFARE_CHKKEYS 0x0623 |
| | 179 | |
| | 180 | #define CMD_MIFARE_SNIFFER 0x0630 |
| | 181 | //ultralightC |
| | 182 | #define CMD_MIFAREUC_AUTH 0x0724 |
| | 183 | //0x0725 and 0x0726 no longer used |
| | 184 | #define CMD_MIFAREUC_SETPWD 0x0727 |
| | 185 | |
| | 186 | |
| | 187 | // mifare desfire |
| | 188 | #define CMD_MIFARE_DESFIRE_READBL 0x0728 |
| | 189 | #define CMD_MIFARE_DESFIRE_WRITEBL 0x0729 |
| | 190 | #define CMD_MIFARE_DESFIRE_AUTH1 0x072a |
| | 191 | #define CMD_MIFARE_DESFIRE_AUTH2 0x072b |
| | 192 | #define CMD_MIFARE_DES_READER 0x072c |
| | 193 | #define CMD_MIFARE_DESFIRE_INFO 0x072d |
| | 194 | #define CMD_MIFARE_DESFIRE 0x072e |
| | 195 | |
| | 196 | #define CMD_UNKNOWN 0xFFFF |
| | 197 | |
| | 198 | |
| | 199 | //Mifare simulation flags |
| | 200 | #define FLAG_INTERACTIVE 0x01 |
| | 201 | #define FLAG_4B_UID_IN_DATA 0x02 |
| | 202 | #define FLAG_7B_UID_IN_DATA 0x04 |
| | 203 | #define FLAG_NR_AR_ATTACK 0x08 |
| | 204 | |
| | 205 | |
| | 206 | //Iclass reader flags |
| | 207 | #define FLAG_ICLASS_READER_ONLY_ONCE 0x01 |
| | 208 | #define FLAG_ICLASS_READER_CC 0x02 |
| | 209 | #define FLAG_ICLASS_READER_CSN 0x04 |
| | 210 | #define FLAG_ICLASS_READER_CONF 0x08 |
| | 211 | #define FLAG_ICLASS_READER_AA 0x10 |
| | 212 | #define FLAG_ICLASS_READER_ONE_TRY 0x20 |
| | 213 | #define FLAG_ICLASS_READER_CEDITKEY 0x40 |
| | 214 | |
| | 215 | |
| | 216 | |
| | 217 | // CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions: |
| | 218 | /* Whether a bootloader that understands the common_area is present */ |
| | 219 | #define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0) |
| | 220 | |
| | 221 | /* Whether a osimage that understands the common_area is present */ |
| | 222 | #define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1) |
| | 223 | |
| | 224 | /* Set if the bootloader is currently executing */ |
| | 225 | #define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2) |
| | 226 | |
| | 227 | /* Set if the OS is currently executing */ |
| | 228 | #define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3) |
| | 229 | |
| | 230 | /* Set if this device understands the extend start flash command */ |
| | 231 | #define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4) |
| | 232 | |
| | 233 | /* CMD_START_FLASH may have three arguments: start of area to flash, |
| | 234 | end of area to flash, optional magic. |
| | 235 | The bootrom will not allow to overwrite itself unless this magic |
| | 236 | is given as third parameter */ |
| | 237 | |
| | 238 | #define START_FLASH_MAGIC 0x54494f44 // 'DOIT' |
| | 239 | |
| | 240 | #endif |
projects / proxmark3-svn / blame_incremental