| | 1 | NOTICE: |
| | 2 | (2014-03-26) |
| | 3 | This is now the official Proxmark repository! |
| | 4 | |
| | 5 | INTRODUCTION: |
| | 6 | |
| | 7 | The proxmark3 is a powerful general purpose RFID tool, the size of a deck |
| | 8 | of cards, designed to snoop, listen and emulate everything from |
| | 9 | Low Frequency (125kHz) to High Frequency (13.56MHz) tags. |
| | 10 | |
| | 11 | This repository contains enough software, logic (for the FPGA), and design |
| | 12 | documentation for the hardware that you could, at least in theory, |
| | 13 | do something useful with a proxmark3. |
| | 14 | |
| | 15 | RESOURCES: |
| | 16 | |
| | 17 | * This repository! |
| | 18 | https://github.com/Proxmark/proxmark3 |
| | 19 | |
| | 20 | * The Wiki |
| | 21 | https://github.com/Proxmark/proxmark3/wiki |
| | 22 | |
| | 23 | * The GitHub page |
| | 24 | http://proxmark.github.io/proxmark3/ |
| | 25 | |
| | 26 | * The Forum |
| | 27 | http://www.proxmark.org/forum |
| | 28 | |
| | 29 | * The IRC chanel |
| | 30 | irc.freenode.org #proxmark3 |
| | 31 | -or- |
| | 32 | http://webchat.freenode.net/?channels=#proxmark3 |
| | 33 | |
| | 34 | DEVELOPMENT: |
| | 35 | |
| | 36 | The tools required to build or run the project will vary depending on |
| | 37 | your operating system. Please refer to the Wiki for details. |
| | 38 | |
| | 39 | * https://github.com/Proxmark/proxmark3/wiki |
| | 40 | |
| | 41 | OBTAINING HARDWARE: |
| | 42 | |
| | 43 | The Proxmark 3 is available for purcahse (assembled and tested) from the |
| | 44 | following locations: |
| | 45 | |
| | 46 | * http://proxmark3.com/ |
| | 47 | * http://www.xfpga.com/ |
| | 48 | |
| | 49 | Most of the ultra-low-volume contract assemblers could put |
| | 50 | something like this together with a reasonable yield. A run of around |
| | 51 | a dozen units is probably cost-effective. The BOM includes (possibly- |
| | 52 | outdated) component pricing, and everything is available from Digikey |
| | 53 | and the usual distributors. |
| | 54 | |
| | 55 | If you've never assembled a modern circuit board by hand, then this is |
| | 56 | not a good place to start. Some of the components (e.g. the crystals) |
| | 57 | must not be assembled with a soldering iron, and require hot air. |
| | 58 | |
| | 59 | The schematics are included; the component values given are not |
| | 60 | necessarily correct for all situations, but it should be possible to do |
| | 61 | nearly anything you would want with appropriate population options. |
| | 62 | |
| | 63 | The printed circuit board artwork is also available, as Gerbers and an |
| | 64 | Excellon drill file. |
| | 65 | |
| | 66 | |
| | 67 | LICENSING: |
| | 68 | |
| | 69 | This program is free software; you can redistribute it and/or modify |
| | 70 | it under the terms of the GNU General Public License as published by |
| | 71 | the Free Software Foundation; either version 2 of the License, or |
| | 72 | (at your option) any later version. |
| | 73 | |
| | 74 | This program is distributed in the hope that it will be useful, |
| | 75 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| | 76 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| | 77 | GNU General Public License for more details. |
| | 78 | |
| | 79 | You should have received a copy of the GNU General Public License |
| | 80 | along with this program; if not, write to the Free Software |
| | 81 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| | 82 | |
| | 83 | |
| | 84 | Jonathan Westhues |
| | 85 | user jwesthues, at host cq.cx |
| | 86 | |
| | 87 | May 2007, Cambridge MA |
projects / proxmark3-svn / blame_incremental