| | 1 | # proxmark3: the official Proxmark repository! |
| | 2 | |
| | 3 | The proxmark3 is a powerful general purpose RFID tool, the size of a deck |
| | 4 | of cards, designed to snoop, listen and emulate everything from |
| | 5 | **Low Frequency (125kHz)** to **High Frequency (13.56MHz)** tags. |
| | 6 | |
| | 7 | This repository contains enough software, logic (for the FPGA), and design |
| | 8 | documentation for the hardware that you could, at least in theory, |
| | 9 | do something useful with a proxmark3. |
| | 10 | |
| | 11 | ## Resources |
| | 12 | |
| | 13 | * [This repository!](https://github.com/Proxmark/proxmark3) |
| | 14 | * [The Wiki](https://github.com/Proxmark/proxmark3/wiki) |
| | 15 | * [The GitHub Pages website](http://proxmark.github.io/proxmark3/) |
| | 16 | * [The Forum](http://www.proxmark.org/forum) |
| | 17 | * The IRC channel: irc.freenode.org #proxmark3 ([chat in your browser](http://webchat.freenode.net/?channels=#proxmark3)) |
| | 18 | * [The Homebrew formula repository](https://github.com/Proxmark/homebrew-proxmark3) |
| | 19 | |
| | 20 | ## Development |
| | 21 | |
| | 22 | The tools required to build or run the project will vary depending on |
| | 23 | your operating system. Please refer to [the wiki](https://github.com/Proxmark/proxmark3/wiki) for details. |
| | 24 | |
| | 25 | ## Obtaining hardware |
| | 26 | |
| | 27 | The Proxmark3 is available for purchase (assembled and tested) from the |
| | 28 | following locations: |
| | 29 | |
| | 30 | | Distributor Name | Warehouse Location | Entity Location | |
| | 31 | |------------------|--------------------|-----------------| |
| | 32 | | [RyscCorp](https://proxmark3.com/) | USA | USA | |
| | 33 | | [Hackerwarehouse](https://hackerwarehouse.com/) | USA | USA | |
| | 34 | | [Elechouse](http://www.elechouse.com/) | HK | HK | |
| | 35 | | [Lab401](https://lab401.com/) | EU | HK | |
| | 36 | | [RFxSecure](http://www.rfxsecure.com/) | CN | SG | |
| | 37 | | [Sneaktechnology](https://www.sneaktechnology.com/) | CN | CN | |
| | 38 | |
| | 39 | |
| | 40 | Most of the ultra-low-volume contract assemblers could put |
| | 41 | something like this together with a reasonable yield. A run of around |
| | 42 | a dozen units is probably cost-effective. The BOM includes (possibly- |
| | 43 | outdated) component pricing, and everything is available from Digikey |
| | 44 | and the usual distributors. |
| | 45 | |
| | 46 | If you've never assembled a modern circuit board by hand, then this is |
| | 47 | not a good place to start. Some of the components (e.g. the crystals) |
| | 48 | must not be assembled with a soldering iron, and require hot air. |
| | 49 | |
| | 50 | The schematics are included; the component values given are not |
| | 51 | necessarily correct for all situations, but it should be possible to do |
| | 52 | nearly anything you would want with appropriate population options. |
| | 53 | |
| | 54 | The printed circuit board artwork is also available, as Gerbers and an |
| | 55 | Excellon drill file. |
| | 56 | |
| | 57 | |
| | 58 | ## License |
| | 59 | |
| | 60 | This program is free software; you can redistribute it and/or modify |
| | 61 | it under the terms of the GNU General Public License as published by |
| | 62 | the Free Software Foundation; either version 2 of the License, or |
| | 63 | (at your option) any later version. |
| | 64 | |
| | 65 | This program is distributed in the hope that it will be useful, |
| | 66 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| | 67 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| | 68 | GNU General Public License for more details. |
| | 69 | |
| | 70 | You should have received a copy of the GNU General Public License |
| | 71 | along with this program; if not, write to the Free Software |
| | 72 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| | 73 | |
| | 74 | |
| | 75 | Jonathan Westhues |
| | 76 | user jwesthues, at host cq.cx |
| | 77 | |
| | 78 | May 2007, Cambridge MA |
projects / proxmark3-svn / blame_incremental