]> cvs.zerfleddert.de Git - proxmark3-svn/blame_incremental - README.md
fix 'hf iclass writebl' and 'hf iclass clone' (#896)
[proxmark3-svn] / README.md
... / ...
CommitLineData
1# proxmark3: the official Proxmark repository!
2
3The proxmark3 is a powerful general purpose RFID tool, the size of a deck
4of cards, designed to snoop, listen and emulate everything from
5**Low Frequency (125kHz)** to **High Frequency (13.56MHz)** tags.
6
7This repository contains enough software, logic (for the FPGA), and design
8documentation for the hardware that you could, at least in theory,
9do something useful with a proxmark3.
10
11## Resources
12
13* [This repository!](https://github.com/Proxmark/proxmark3)
14* [The Wiki](https://github.com/Proxmark/proxmark3/wiki)
15* [The GitHub Pages website](http://proxmark.github.io/proxmark3/)
16* [The Forum](http://www.proxmark.org/forum)
17* The IRC channel: irc.freenode.org #proxmark3 ([chat in your browser](http://webchat.freenode.net/?channels=#proxmark3))
18* [The Homebrew formula repository](https://github.com/Proxmark/homebrew-proxmark3)
19
20## Development
21
22The tools required to build or run the project will vary depending on
23your operating system. Please refer to [the wiki](https://github.com/Proxmark/proxmark3/wiki) for details.
24
25## Obtaining hardware
26
27The Proxmark3 is available for purchase (assembled and tested) from the
28following locations:
29
30| Distributor Name | Warehouse Location | Entity Location |
31|------------------|--------------------|-----------------|
32| [RyscCorp](https://proxmark3.com/) | USA | USA |
33| [Hackerwarehouse](https://hackerwarehouse.com/) | USA | USA |
34| [Elechouse](http://www.elechouse.com/) | HK | HK |
35| [Lab401](https://lab401.com/) | EU | HK |
36| [RFxSecure](http://www.rfxsecure.com/) | CN | SG |
37| [Sneaktechnology](https://www.sneaktechnology.com/) | CN | CN |
38
39
40Most of the ultra-low-volume contract assemblers could put
41something like this together with a reasonable yield. A run of around
42a dozen units is probably cost-effective. The BOM includes (possibly-
43outdated) component pricing, and everything is available from Digikey
44and the usual distributors.
45
46If you've never assembled a modern circuit board by hand, then this is
47not a good place to start. Some of the components (e.g. the crystals)
48must not be assembled with a soldering iron, and require hot air.
49
50The schematics are included; the component values given are not
51necessarily correct for all situations, but it should be possible to do
52nearly anything you would want with appropriate population options.
53
54The printed circuit board artwork is also available, as Gerbers and an
55Excellon drill file.
56
57
58## License
59
60This program is free software; you can redistribute it and/or modify
61it under the terms of the GNU General Public License as published by
62the Free Software Foundation; either version 2 of the License, or
63(at your option) any later version.
64
65This program is distributed in the hope that it will be useful,
66but WITHOUT ANY WARRANTY; without even the implied warranty of
67MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
68GNU General Public License for more details.
69
70You should have received a copy of the GNU General Public License
71along with this program; if not, write to the Free Software
72Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
73
74
75Jonathan Westhues
76user jwesthues, at host cq.cx
77
78May 2007, Cambridge MA
Impressum, Datenschutz