| | 1 | //-----------------------------------------------------------------------------\r |
| | 2 | // Definitions for all the types of commands that may be sent over USB; our\r |
| | 3 | // own protocol.\r |
| | 4 | // Jonathan Westhues, Mar 2006\r |
| | 5 | // Edits by Gerhard de Koning Gans, Sep 2007\r |
| | 6 | //-----------------------------------------------------------------------------\r |
| | 7 | \r |
| | 8 | #ifndef __USB_CMD_H\r |
| | 9 | #define __USB_CMD_H\r |
| | 10 | #ifdef _MSC_VER\r |
| | 11 | typedef DWORD uint32_t;\r |
| | 12 | typedef BYTE uint8_t;\r |
| | 13 | #define PACKED\r |
| | 14 | // stuff\r |
| | 15 | #else\r |
| | 16 | #include <stdint.h>\r |
| | 17 | #include <stdbool.h>\r |
| | 18 | #define PACKED __attribute__((packed))\r |
| | 19 | #endif\r |
| | 20 | \r |
| | 21 | typedef struct {\r |
| | 22 | uint32_t cmd;\r |
| | 23 | uint32_t arg[3];\r |
| | 24 | union {\r |
| | 25 | uint8_t asBytes[48];\r |
| | 26 | uint32_t asDwords[12];\r |
| | 27 | } d;\r |
| | 28 | } PACKED UsbCommand;\r |
| | 29 | \r |
| | 30 | // For the bootloader\r |
| | 31 | #define CMD_DEVICE_INFO 0x0000\r |
| | 32 | #define CMD_SETUP_WRITE 0x0001\r |
| | 33 | #define CMD_FINISH_WRITE 0x0003\r |
| | 34 | #define CMD_HARDWARE_RESET 0x0004\r |
| | 35 | #define CMD_START_FLASH 0x0005\r |
| | 36 | #define CMD_NACK 0x00fe\r |
| | 37 | #define CMD_ACK 0x00ff\r |
| | 38 | \r |
| | 39 | // For general mucking around\r |
| | 40 | #define CMD_DEBUG_PRINT_STRING 0x0100\r |
| | 41 | #define CMD_DEBUG_PRINT_INTEGERS 0x0101\r |
| | 42 | #define CMD_DEBUG_PRINT_BYTES 0x0102\r |
| | 43 | #define CMD_LCD_RESET 0x0103\r |
| | 44 | #define CMD_LCD 0x0104\r |
| | 45 | #define CMD_BUFF_CLEAR 0x0105\r |
| | 46 | #define CMD_READ_MEM 0x0106\r |
| | 47 | #define CMD_VERSION 0x0107\r |
| | 48 | \r |
| | 49 | // For low-frequency tags\r |
| | 50 | #define CMD_READ_TI_TYPE 0x0202\r |
| | 51 | #define CMD_WRITE_TI_TYPE 0x0203\r |
| | 52 | #define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204\r |
| | 53 | #define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205\r |
| | 54 | #define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206\r |
| | 55 | #define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207\r |
| | 56 | #define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208\r |
| | 57 | #define CMD_DOWNLOADED_SIM_SAMPLES_125K 0x0209\r |
| | 58 | #define CMD_SIMULATE_TAG_125K 0x020A\r |
| | 59 | #define CMD_HID_DEMOD_FSK 0x020B\r |
| | 60 | #define CMD_HID_SIM_TAG 0x020C\r |
| | 61 | #define CMD_SET_LF_DIVISOR 0x020D\r |
| | 62 | #define CMD_LF_SIMULATE_BIDIR 0x020E\r |
| | 63 | #define CMD_SET_ADC_MUX 0x020F\r |
| | 64 | /* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */\r |
| | 65 | \r |
| | 66 | // For the 13.56 MHz tags\r |
| | 67 | #define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300\r |
| | 68 | #define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443 0x0301\r |
| | 69 | #define CMD_READ_SRI512_TAG 0x0303\r |
| | 70 | #define CMD_READ_SRIX4K_TAG 0x0304\r |
| | 71 | #define CMD_READER_ISO_15693 0x0310\r |
| | 72 | #define CMD_SIMTAG_ISO_15693 0x0311\r |
| | 73 | #define CMD_SIMULATE_TAG_HF_LISTEN 0x0380\r |
| | 74 | #define CMD_SIMULATE_TAG_ISO_14443 0x0381\r |
| | 75 | #define CMD_SNOOP_ISO_14443 0x0382\r |
| | 76 | #define CMD_SNOOP_ISO_14443a 0x0383\r |
| | 77 | #define CMD_SIMULATE_TAG_ISO_14443a 0x0384\r |
| | 78 | #define CMD_READER_ISO_14443a 0x0385\r |
| | 79 | #define CMD_SIMULATE_MIFARE_CARD 0x0386\r |
| | 80 | #define CMD_SIMULATE_TAG_LEGIC_RF 0x0387\r |
| | 81 | #define CMD_READER_LEGIC_RF 0x0388\r |
| | 82 | #define CMD_READER_MIFARE 0x0389\r |
| | 83 | \r |
| | 84 | // For measurements of the antenna tuning\r |
| | 85 | #define CMD_MEASURE_ANTENNA_TUNING 0x0400\r |
| | 86 | #define CMD_MEASURE_ANTENNA_TUNING_HF 0x0401\r |
| | 87 | #define CMD_MEASURED_ANTENNA_TUNING 0x0410\r |
| | 88 | #define CMD_LISTEN_READER_FIELD 0x0420\r |
| | 89 | \r |
| | 90 | // For direct FPGA control\r |
| | 91 | #define CMD_FPGA_MAJOR_MODE_OFF 0x0500\r |
| | 92 | \r |
| | 93 | #define CMD_UNKNOWN 0xFFFF\r |
| | 94 | \r |
| | 95 | // CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions:\r |
| | 96 | /* Whether a bootloader that understands the common_area is present */ \r |
| | 97 | #define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0)\r |
| | 98 | \r |
| | 99 | /* Whether a osimage that understands the common_area is present */\r |
| | 100 | #define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1)\r |
| | 101 | \r |
| | 102 | /* Set if the bootloader is currently executing */\r |
| | 103 | #define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2)\r |
| | 104 | \r |
| | 105 | /* Set if the OS is currently executing */\r |
| | 106 | #define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3)\r |
| | 107 | \r |
| | 108 | /* Set if this device understands the extend start flash command */\r |
| | 109 | #define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4)\r |
| | 110 | \r |
| | 111 | /* CMD_START_FLASH may have three arguments: start of area to flash, \r |
| | 112 | end of area to flash, optional magic.\r |
| | 113 | The bootrom will not allow to overwrite itself unless this magic\r |
| | 114 | is given as third parameter */\r |
| | 115 | \r |
| | 116 | #define START_FLASH_MAGIC 0x54494f44 // 'DOIT'\r |
| | 117 | \r |
| | 118 | #endif\r |
projects / proxmark3-svn / blame_incremental