mf plus info with detect sl mode (#695)

[proxmark3-svn] / fpga / tests / tb_lf_edge_detect.v

//-----------------------------------------------------------------------------
// Copyright (C) 2014 iZsh <izsh at fail0verflow.com>
//
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
// at your option, any later version. See the LICENSE.txt file for the text of
// the license.
//-----------------------------------------------------------------------------
// testbench for lf_edge_detect
`include "lf_edge_detect.v"

`define FIN "tb_tmp/data.filtered.gold"
`define FOUT_MIN "tb_tmp/data.min"
`define FOUT_MAX "tb_tmp/data.max"
`define FOUT_STATE "tb_tmp/data.state"
`define FOUT_TOGGLE "tb_tmp/data.toggle"
`define FOUT_HIGH "tb_tmp/data.high"
`define FOUT_HIGHZ "tb_tmp/data.highz"
`define FOUT_LOWZ "tb_tmp/data.lowz"
`define FOUT_LOW "tb_tmp/data.low"

module lf_edge_detect_tb;

	integer fin, fout_state, fout_toggle;
	integer fout_high, fout_highz, fout_lowz, fout_low, fout_min, fout_max;
	integer r;

	reg clk = 0;
	reg [7:0] adc_d;
	wire adc_clk;
	wire data_rdy;
	wire edge_state;
	wire edge_toggle;

    wire [7:0] high_threshold;
    wire [7:0] highz_threshold;
    wire [7:0] lowz_threshold;
    wire [7:0] low_threshold;
    wire [7:0] max;
    wire [7:0] min;

	initial
	begin
		clk = 0;
		fin = $fopen(`FIN, "r");
		if (!fin) begin
			$display("ERROR: can't open the data file");
			$finish;
		end
		fout_min = $fopen(`FOUT_MIN, "w+");		
		fout_max = $fopen(`FOUT_MAX, "w+");		
		fout_state = $fopen(`FOUT_STATE, "w+");		
		fout_toggle = $fopen(`FOUT_TOGGLE, "w+");		
		fout_high = $fopen(`FOUT_HIGH, "w+");		
		fout_highz = $fopen(`FOUT_HIGHZ, "w+");		
		fout_lowz = $fopen(`FOUT_LOWZ, "w+");		
		fout_low = $fopen(`FOUT_LOW, "w+");		
		if (!$feof(fin))
			adc_d = $fgetc(fin); // read the first value
	end

	always
		# 1 clk = !clk;

	// input
	initial
	begin
		while (!$feof(fin)) begin
			@(negedge clk) adc_d <= $fgetc(fin);
		end

		if ($feof(fin))
		begin
			# 3 $fclose(fin);
			$fclose(fout_state);
			$fclose(fout_toggle);
			$fclose(fout_high);
			$fclose(fout_highz);
			$fclose(fout_lowz);
			$fclose(fout_low);
			$fclose(fout_min);
			$fclose(fout_max);
			$finish;
		end
	end

	initial
	begin
		// $monitor("%d\t S: %b, E: %b", $time, edge_state, edge_toggle);
	end

	// output
	always @(negedge clk)
	if ($time > 2) begin
		r = $fputc(min, fout_min);
		r = $fputc(max, fout_max);
		r = $fputc(edge_state, fout_state);
		r = $fputc(edge_toggle, fout_toggle);
		r = $fputc(high_threshold, fout_high);
		r = $fputc(highz_threshold, fout_highz);
		r = $fputc(lowz_threshold, fout_lowz);
		r = $fputc(low_threshold, fout_low);
	end

	// module to test
	lf_edge_detect detect(clk, adc_d, 8'd127,
		max, min,
		high_threshold, highz_threshold,
		lowz_threshold, low_threshold,
		edge_state, edge_toggle);

endmodule