]> cvs.zerfleddert.de Git - proxmark3-svn/blame_incremental - include/usb_cmd.h
fix target name for Windows compile
[proxmark3-svn] / include / usb_cmd.h
... / ...
CommitLineData
1//-----------------------------------------------------------------------------\r
2// Definitions for all the types of commands that may be sent over USB; our\r
3// own protocol.\r
4// Jonathan Westhues, Mar 2006\r
5// Edits by Gerhard de Koning Gans, Sep 2007\r
6//-----------------------------------------------------------------------------\r
7\r
8#ifndef __USB_CMD_H\r
9#define __USB_CMD_H\r
10#ifdef _MSC_VER\r
11typedef DWORD uint32_t;\r
12typedef BYTE uint8_t;\r
13#define PACKED\r
14// stuff\r
15#else\r
16#include <stdint.h>\r
17#include <stdbool.h>\r
18#define PACKED __attribute__((packed))\r
19#endif\r
20\r
21typedef struct {\r
22 uint32_t cmd;\r
23 uint32_t arg[3];\r
24 union {\r
25 uint8_t asBytes[48];\r
26 uint32_t asDwords[12];\r
27 } d;\r
28} PACKED UsbCommand;\r
29\r
30// For the bootloader\r
31#define CMD_DEVICE_INFO 0x0000\r
32#define CMD_SETUP_WRITE 0x0001\r
33#define CMD_FINISH_WRITE 0x0003\r
34#define CMD_HARDWARE_RESET 0x0004\r
35#define CMD_START_FLASH 0x0005\r
36#define CMD_NACK 0x00fe\r
37#define CMD_ACK 0x00ff\r
38\r
39// For general mucking around\r
40#define CMD_DEBUG_PRINT_STRING 0x0100\r
41#define CMD_DEBUG_PRINT_INTEGERS 0x0101\r
42#define CMD_DEBUG_PRINT_BYTES 0x0102\r
43#define CMD_LCD_RESET 0x0103\r
44#define CMD_LCD 0x0104\r
45#define CMD_BUFF_CLEAR 0x0105\r
46#define CMD_READ_MEM 0x0106\r
47#define CMD_VERSION 0x0107\r
48\r
49// For low-frequency tags\r
50#define CMD_READ_TI_TYPE 0x0202\r
51#define CMD_WRITE_TI_TYPE 0x0203\r
52#define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204\r
53#define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205\r
54#define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206\r
55#define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207\r
56#define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208\r
57#define CMD_DOWNLOADED_SIM_SAMPLES_125K 0x0209\r
58#define CMD_SIMULATE_TAG_125K 0x020A\r
59#define CMD_HID_DEMOD_FSK 0x020B\r
60#define CMD_HID_SIM_TAG 0x020C\r
61#define CMD_SET_LF_DIVISOR 0x020D\r
62#define CMD_LF_SIMULATE_BIDIR 0x020E\r
63#define CMD_SET_ADC_MUX 0x020F\r
64/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */\r
65\r
66// For the 13.56 MHz tags\r
67#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300\r
68#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443 0x0301\r
69#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443_SIM 0x0302\r
70#define CMD_READ_SRI512_TAG 0x0303\r
71#define CMD_READ_SRIX4K_TAG 0x0304\r
72#define CMD_READER_ISO_15693 0x0310\r
73#define CMD_SIMTAG_ISO_15693 0x0311\r
74#define CMD_SIMULATE_TAG_HF_LISTEN 0x0380\r
75#define CMD_SIMULATE_TAG_ISO_14443 0x0381\r
76#define CMD_SNOOP_ISO_14443 0x0382\r
77#define CMD_SNOOP_ISO_14443a 0x0383\r
78#define CMD_SIMULATE_TAG_ISO_14443a 0x0384\r
79#define CMD_READER_ISO_14443a 0x0385\r
80#define CMD_SIMULATE_MIFARE_CARD 0x0386\r
81#define CMD_SIMULATE_TAG_LEGIC_RF 0x0387\r
82#define CMD_READER_LEGIC_RF 0x0388\r
83\r
84// For measurements of the antenna tuning\r
85#define CMD_MEASURE_ANTENNA_TUNING 0x0400\r
86#define CMD_MEASURED_ANTENNA_TUNING 0x0401\r
87#define CMD_LISTEN_READER_FIELD 0x0402\r
88\r
89// For direct FPGA control\r
90#define CMD_FPGA_MAJOR_MODE_OFF 0x0500\r
91\r
92#define CMD_UNKNOWN 0xFFFF\r
93\r
94// CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions:\r
95/* Whether a bootloader that understands the common_area is present */ \r
96#define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0)\r
97\r
98/* Whether a osimage that understands the common_area is present */\r
99#define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1)\r
100\r
101/* Set if the bootloader is currently executing */\r
102#define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2)\r
103\r
104/* Set if the OS is currently executing */\r
105#define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3)\r
106\r
107/* Set if this device understands the extend start flash command */\r
108#define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4)\r
109\r
110/* CMD_START_FLASH may have three arguments: start of area to flash, \r
111 end of area to flash, optional magic.\r
112 The bootrom will not allow to overwrite itself unless this magic\r
113 is given as third parameter */\r
114\r
115#define START_FLASH_MAGIC 0x54494f44 // 'DOIT'\r
116\r
117#endif\r
Impressum, Datenschutz