| | 1 | #ifndef PROTOCOLS_H |
| | 2 | #define PROTOCOLS_H |
| | 3 | |
| | 4 | //The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501 |
| | 5 | /* |
| | 6 | ISO14443A (usually NFC tags) |
| | 7 | 26 (7bits) = REQA |
| | 8 | 30 = Read (usage: 30+1byte block number+2bytes ISO14443A-CRC - answer: 16bytes) |
| | 9 | A2 = Write (usage: A2+1byte block number+4bytes data+2bytes ISO14443A-CRC - answer: 0A [ACK] or 00 [NAK]) |
| | 10 | 52 (7bits) = WUPA (usage: 52(7bits) - answer: 2bytes ATQA) |
| | 11 | 93 20 = Anticollision (usage: 9320 - answer: 4bytes UID+1byte UID-bytes-xor) |
| | 12 | 93 70 = Select (usage: 9370+5bytes 9320 answer - answer: 1byte SAK) |
| | 13 | 95 20 = Anticollision of cascade level2 |
| | 14 | 95 70 = Select of cascade level2 |
| | 15 | 50 00 = Halt (usage: 5000+2bytes ISO14443A-CRC - no answer from card) |
| | 16 | Mifare |
| | 17 | 60 = Authenticate with KeyA |
| | 18 | 61 = Authenticate with KeyB |
| | 19 | 40 (7bits) = Used to put Chinese Changeable UID cards in special mode (must be followed by 43 (8bits) - answer: 0A) |
| | 20 | C0 = Decrement |
| | 21 | C1 = Increment |
| | 22 | C2 = Restore |
| | 23 | B0 = Transfer |
| | 24 | Ultralight C |
| | 25 | A0 = Compatibility Write (to accomodate MIFARE commands) |
| | 26 | 1A = Step1 Authenticate |
| | 27 | AF = Step2 Authenticate |
| | 28 | |
| | 29 | |
| | 30 | ISO14443B |
| | 31 | 05 = REQB |
| | 32 | 1D = ATTRIB |
| | 33 | 50 = HALT |
| | 34 | SRIX4K (tag does not respond to 05) |
| | 35 | 06 00 = INITIATE |
| | 36 | 0E xx = SELECT ID (xx = Chip-ID) |
| | 37 | 0B = Get UID |
| | 38 | 08 yy = Read Block (yy = block number) |
| | 39 | 09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written) |
| | 40 | 0C = Reset to Inventory |
| | 41 | 0F = Completion |
| | 42 | 0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate) |
| | 43 | |
| | 44 | |
| | 45 | ISO15693 |
| | 46 | MANDATORY COMMANDS (all ISO15693 tags must support those) |
| | 47 | 01 = Inventory (usage: 260100+2bytes ISO15693-CRC - answer: 12bytes) |
| | 48 | 02 = Stay Quiet |
| | 49 | OPTIONAL COMMANDS (not all tags support them) |
| | 50 | 20 = Read Block (usage: 0220+1byte block number+2bytes ISO15693-CRC - answer: 4bytes) |
| | 51 | 21 = Write Block (usage: 0221+1byte block number+4bytes data+2bytes ISO15693-CRC - answer: 4bytes) |
| | 52 | 22 = Lock Block |
| | 53 | 23 = Read Multiple Blocks (usage: 0223+1byte 1st block to read+1byte last block to read+2bytes ISO15693-CRC) |
| | 54 | 25 = Select |
| | 55 | 26 = Reset to Ready |
| | 56 | 27 = Write AFI |
| | 57 | 28 = Lock AFI |
| | 58 | 29 = Write DSFID |
| | 59 | 2A = Lock DSFID |
| | 60 | 2B = Get_System_Info (usage: 022B+2bytes ISO15693-CRC - answer: 14 or more bytes) |
| | 61 | 2C = Read Multiple Block Security Status (usage: 022C+1byte 1st block security to read+1byte last block security to read+2bytes ISO15693-CRC) |
| | 62 | |
| | 63 | EM Microelectronic CUSTOM COMMANDS |
| | 64 | A5 = Active EAS (followed by 1byte IC Manufacturer code+1byte EAS type) |
| | 65 | A7 = Write EAS ID (followed by 1byte IC Manufacturer code+2bytes EAS value) |
| | 66 | B8 = Get Protection Status for a specific block (followed by 1byte IC Manufacturer code+1byte block number+1byte of how many blocks after the previous is needed the info) |
| | 67 | E4 = Login (followed by 1byte IC Manufacturer code+4bytes password) |
| | 68 | NXP/Philips CUSTOM COMMANDS |
| | 69 | A0 = Inventory Read |
| | 70 | A1 = Fast Inventory Read |
| | 71 | A2 = Set EAS |
| | 72 | A3 = Reset EAS |
| | 73 | A4 = Lock EAS |
| | 74 | A5 = EAS Alarm |
| | 75 | A6 = Password Protect EAS |
| | 76 | A7 = Write EAS ID |
| | 77 | A8 = Read EPC |
| | 78 | B0 = Inventory Page Read |
| | 79 | B1 = Fast Inventory Page Read |
| | 80 | B2 = Get Random Number |
| | 81 | B3 = Set Password |
| | 82 | B4 = Write Password |
| | 83 | B5 = Lock Password |
| | 84 | B6 = Bit Password Protection |
| | 85 | B7 = Lock Page Protection Condition |
| | 86 | B8 = Get Multiple Block Protection Status |
| | 87 | B9 = Destroy SLI |
| | 88 | BA = Enable Privacy |
| | 89 | BB = 64bit Password Protection |
| | 90 | 40 = Long Range CMD (Standard ISO/TR7003:1990) |
| | 91 | */ |
| | 92 | |
| | 93 | #define ICLASS_CMD_ACTALL 0x0A |
| | 94 | #define ICLASS_CMD_READ_OR_IDENTIFY 0x0C |
| | 95 | #define ICLASS_CMD_SELECT 0x81 |
| | 96 | #define ICLASS_CMD_PAGESEL 0x84 |
| | 97 | #define ICLASS_CMD_READCHECK_KD 0x88 |
| | 98 | #define ICLASS_CMD_READCHECK_KC 0x18 |
| | 99 | #define ICLASS_CMD_CHECK 0x05 |
| | 100 | #define ICLASS_CMD_DETECT 0x0F |
| | 101 | #define ICLASS_CMD_HALT 0x00 |
| | 102 | #define ICLASS_CMD_UPDATE 0x87 |
| | 103 | #define ICLASS_CMD_ACT 0x8E |
| | 104 | #define ICLASS_CMD_READ4 0x06 |
| | 105 | |
| | 106 | |
| | 107 | #define ISO14443A_CMD_REQA 0x26 |
| | 108 | #define ISO14443A_CMD_READBLOCK 0x30 |
| | 109 | #define ISO14443A_CMD_WUPA 0x52 |
| | 110 | #define ISO14443A_CMD_ANTICOLL_OR_SELECT 0x93 |
| | 111 | #define ISO14443A_CMD_ANTICOLL_OR_SELECT_2 0x95 |
| | 112 | #define ISO14443A_CMD_WRITEBLOCK 0xA0 // or 0xA2 ? |
| | 113 | #define ISO14443A_CMD_HALT 0x50 |
| | 114 | #define ISO14443A_CMD_RATS 0xE0 |
| | 115 | |
| | 116 | #define MIFARE_AUTH_KEYA 0x60 |
| | 117 | #define MIFARE_AUTH_KEYB 0x61 |
| | 118 | #define MIFARE_MAGICWUPC1 0x40 |
| | 119 | #define MIFARE_MAGICWUPC2 0x43 |
| | 120 | #define MIFARE_MAGICWIPEC 0x41 |
| | 121 | #define MIFARE_CMD_INC 0xC0 |
| | 122 | #define MIFARE_CMD_DEC 0xC1 |
| | 123 | #define MIFARE_CMD_RESTORE 0xC2 |
| | 124 | #define MIFARE_CMD_TRANSFER 0xB0 |
| | 125 | |
| | 126 | #define MIFARE_ULC_WRITE 0xA2 |
| | 127 | //#define MIFARE_ULC__COMP_WRITE 0xA0 |
| | 128 | #define MIFARE_ULC_AUTH_1 0x1A |
| | 129 | #define MIFARE_ULC_AUTH_2 0xAF |
| | 130 | |
| | 131 | #define MIFARE_ULEV1_AUTH 0x1B |
| | 132 | #define MIFARE_ULEV1_VERSION 0x60 |
| | 133 | #define MIFARE_ULEV1_FASTREAD 0x3A |
| | 134 | //#define MIFARE_ULEV1_WRITE 0xA2 |
| | 135 | //#define MIFARE_ULEV1_COMP_WRITE 0xA0 |
| | 136 | #define MIFARE_ULEV1_READ_CNT 0x39 |
| | 137 | #define MIFARE_ULEV1_INCR_CNT 0xA5 |
| | 138 | #define MIFARE_ULEV1_READSIG 0x3C |
| | 139 | #define MIFARE_ULEV1_CHECKTEAR 0x3E |
| | 140 | #define MIFARE_ULEV1_VCSL 0x4B |
| | 141 | |
| | 142 | /** |
| | 143 | 06 00 = INITIATE |
| | 144 | 0E xx = SELECT ID (xx = Chip-ID) |
| | 145 | 0B = Get UID |
| | 146 | 08 yy = Read Block (yy = block number) |
| | 147 | 09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written) |
| | 148 | 0C = Reset to Inventory |
| | 149 | 0F = Completion |
| | 150 | 0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate) |
| | 151 | **/ |
| | 152 | |
| | 153 | #define ISO14443B_REQB 0x05 |
| | 154 | #define ISO14443B_ATTRIB 0x1D |
| | 155 | #define ISO14443B_HALT 0x50 |
| | 156 | #define ISO14443B_INITIATE 0x06 |
| | 157 | #define ISO14443B_SELECT 0x0E |
| | 158 | #define ISO14443B_GET_UID 0x0B |
| | 159 | #define ISO14443B_READ_BLK 0x08 |
| | 160 | #define ISO14443B_WRITE_BLK 0x09 |
| | 161 | #define ISO14443B_RESET 0x0C |
| | 162 | #define ISO14443B_COMPLETION 0x0F |
| | 163 | #define ISO14443B_AUTHENTICATE 0x0A |
| | 164 | |
| | 165 | //First byte is 26 |
| | 166 | #define ISO15693_INVENTORY 0x01 |
| | 167 | #define ISO15693_STAYQUIET 0x02 |
| | 168 | //First byte is 02 |
| | 169 | #define ISO15693_READBLOCK 0x20 |
| | 170 | #define ISO15693_WRITEBLOCK 0x21 |
| | 171 | #define ISO15693_LOCKBLOCK 0x22 |
| | 172 | #define ISO15693_READ_MULTI_BLOCK 0x23 |
| | 173 | #define ISO15693_SELECT 0x25 |
| | 174 | #define ISO15693_RESET_TO_READY 0x26 |
| | 175 | #define ISO15693_WRITE_AFI 0x27 |
| | 176 | #define ISO15693_LOCK_AFI 0x28 |
| | 177 | #define ISO15693_WRITE_DSFID 0x29 |
| | 178 | #define ISO15693_LOCK_DSFID 0x2A |
| | 179 | #define ISO15693_GET_SYSTEM_INFO 0x2B |
| | 180 | #define ISO15693_READ_MULTI_SECSTATUS 0x2C |
| | 181 | |
| | 182 | |
| | 183 | #define ISO_14443A 0 |
| | 184 | #define ICLASS 1 |
| | 185 | #define ISO_14443B 2 |
| | 186 | |
| | 187 | //-- Picopass fuses |
| | 188 | #define FUSE_FPERS 0x80 |
| | 189 | #define FUSE_CODING1 0x40 |
| | 190 | #define FUSE_CODING0 0x20 |
| | 191 | #define FUSE_CRYPT1 0x10 |
| | 192 | #define FUSE_CRYPT0 0x08 |
| | 193 | #define FUSE_FPROD1 0x04 |
| | 194 | #define FUSE_FPROD0 0x02 |
| | 195 | #define FUSE_RA 0x01 |
| | 196 | |
| | 197 | |
| | 198 | void printIclassDumpInfo(uint8_t* iclass_dump); |
| | 199 | |
| | 200 | #endif // PROTOCOLS_H |
projects / proxmark3-svn / blame_incremental