]> cvs.zerfleddert.de Git - proxmark3-svn/blob - include/usb_cmd.h
082b7d50175eaff5a98c19c1a0d947d003520c46
[proxmark3-svn] / include / usb_cmd.h
1 //-----------------------------------------------------------------------------
2 // Jonathan Westhues, Mar 2006
3 // Edits by Gerhard de Koning Gans, Sep 2007
4 //
5 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
6 // at your option, any later version. See the LICENSE.txt file for the text of
7 // the license.
8 //-----------------------------------------------------------------------------
9 // Definitions for all the types of commands that may be sent over USB; our
10 // own protocol.
11 //-----------------------------------------------------------------------------
12
13 #ifndef USB_CMD_H__
14 #define USB_CMD_H__
15
16 #ifdef _MSC_VER
17 typedef DWORD uint32_t;
18 typedef BYTE uint8_t;
19 #define PACKED
20 #else
21 #include <stdint.h>
22 #include <stdbool.h>
23 #define PACKED __attribute__((packed))
24 #endif
25
26 #define USB_CMD_DATA_SIZE 512
27
28 typedef struct {
29 uint64_t cmd;
30 uint64_t arg[3];
31 union {
32 uint8_t asBytes[USB_CMD_DATA_SIZE];
33 uint32_t asDwords[USB_CMD_DATA_SIZE/4];
34 } d;
35 } PACKED UsbCommand;
36
37
38 // A struct used to send sample-configs over USB
39 typedef struct {
40 uint8_t decimation;
41 uint8_t bits_per_sample;
42 bool averaging;
43 int divisor;
44 int trigger_threshold;
45 int samples_to_skip;
46 } sample_config;
47
48
49 // For the bootloader
50 #define CMD_DEVICE_INFO 0x0000
51 #define CMD_SETUP_WRITE 0x0001
52 #define CMD_FINISH_WRITE 0x0003
53 #define CMD_HARDWARE_RESET 0x0004
54 #define CMD_START_FLASH 0x0005
55 #define CMD_NACK 0x00fe
56 #define CMD_ACK 0x00ff
57
58 // For general mucking around
59 #define CMD_DEBUG_PRINT_STRING 0x0100
60 #define CMD_DEBUG_PRINT_INTEGERS 0x0101
61 #define CMD_DEBUG_PRINT_BYTES 0x0102
62 #define CMD_LCD_RESET 0x0103
63 #define CMD_LCD 0x0104
64 #define CMD_BUFF_CLEAR 0x0105
65 #define CMD_READ_MEM 0x0106
66 #define CMD_VERSION 0x0107
67 #define CMD_STATUS 0x0108
68 #define CMD_PING 0x0109
69
70 // controlling the ADC input multiplexer
71 #define CMD_SET_ADC_MUX 0x020F
72
73 // RDV40, Smart card operations
74 #define CMD_SMART_RAW 0x0140
75 #define CMD_SMART_UPGRADE 0x0141
76 #define CMD_SMART_UPLOAD 0x0142
77 #define CMD_SMART_ATR 0x0143
78 // CMD_SMART_SETBAUD is unused for now
79 #define CMD_SMART_SETBAUD 0x0144
80 #define CMD_SMART_SETCLOCK 0x0145
81
82 // For low-frequency tags
83 #define CMD_READ_TI_TYPE 0x0202
84 #define CMD_WRITE_TI_TYPE 0x0203
85 #define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204
86 #define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205
87 #define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206
88 #define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207
89 #define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208
90 #define CMD_DOWNLOADED_SIM_SAMPLES_125K 0x0209
91 #define CMD_SIMULATE_TAG_125K 0x020A
92 #define CMD_HID_DEMOD_FSK 0x020B
93 #define CMD_HID_SIM_TAG 0x020C
94 #define CMD_SET_LF_DIVISOR 0x020D
95 #define CMD_LF_SIMULATE_BIDIR 0x020E
96 #define CMD_HID_CLONE_TAG 0x0210
97 #define CMD_EM410X_WRITE_TAG 0x0211
98 #define CMD_INDALA_CLONE_TAG 0x0212
99 // for 224 bits UID
100 #define CMD_INDALA_CLONE_TAG_L 0x0213
101 #define CMD_T55XX_READ_BLOCK 0x0214
102 #define CMD_T55XX_WRITE_BLOCK 0x0215
103 #define CMD_T55XX_RESET_READ 0x0216
104 #define CMD_PCF7931_READ 0x0217
105 #define CMD_PCF7931_WRITE 0x0222
106 #define CMD_PCF7931_BRUTEFORCE 0x0227
107 #define CMD_EM4X_READ_WORD 0x0218
108 #define CMD_EM4X_WRITE_WORD 0x0219
109 #define CMD_IO_DEMOD_FSK 0x021A
110 #define CMD_IO_CLONE_TAG 0x021B
111 #define CMD_EM410X_DEMOD 0x021c
112 // Sampling configuration for LF reader/snooper
113 #define CMD_SET_LF_SAMPLING_CONFIG 0x021d
114 #define CMD_FSK_SIM_TAG 0x021E
115 #define CMD_ASK_SIM_TAG 0x021F
116 #define CMD_PSK_SIM_TAG 0x0220
117 #define CMD_AWID_DEMOD_FSK 0x0221
118 #define CMD_VIKING_CLONE_TAG 0x0223
119 #define CMD_T55XX_WAKEUP 0x0224
120 #define CMD_COTAG 0x0225
121 #define CMD_PARADOX_CLONE_TAG 0x0226
122 #define CMD_EM4X_PROTECT 0x0228
123
124 // For the 13.56 MHz tags
125 #define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300
126 #define CMD_READ_SRI512_TAG 0x0303
127 #define CMD_READ_SRIX4K_TAG 0x0304
128 #define CMD_ISO_14443B_COMMAND 0x0305
129 #define CMD_READER_ISO_15693 0x0310
130 #define CMD_SIMTAG_ISO_15693 0x0311
131 #define CMD_SNOOP_ISO_15693 0x0312
132 #define CMD_ISO_15693_COMMAND 0x0313
133 #define CMD_ISO_15693_COMMAND_DONE 0x0314
134 #define CMD_ISO_15693_FIND_AFI 0x0315
135 #define CMD_ISO_15693_DEBUG 0x0316
136 #define CMD_LF_SNOOP_RAW_ADC_SAMPLES 0x0317
137 #define CMD_CSETUID_ISO_15693 0x0318
138
139 // For Hitag2 transponders
140 #define CMD_SNOOP_HITAG 0x0370
141 #define CMD_SIMULATE_HITAG 0x0371
142 #define CMD_READER_HITAG 0x0372
143 #define CMD_SIMULATE_HITAG_S 0x0368
144 #define CMD_TEST_HITAGS_TRACES 0x0367
145 #define CMD_READ_HITAG_S 0x0373
146 #define CMD_READ_HITAG_S_BLK 0x0374
147 #define CMD_WR_HITAG_S 0x0375
148 #define CMD_EMU_HITAG_S 0x0376
149
150 #define CMD_SIMULATE_TAG_ISO_14443B 0x0381
151 #define CMD_SNOOP_ISO_14443B 0x0382
152 #define CMD_SNOOP_ISO_14443a 0x0383
153 #define CMD_SIMULATE_TAG_ISO_14443a 0x0384
154 #define CMD_READER_ISO_14443a 0x0385
155 #define CMD_SIMULATE_TAG_LEGIC_RF 0x0387
156 #define CMD_READER_LEGIC_RF 0x0388
157 #define CMD_WRITER_LEGIC_RF 0x0389
158 #define CMD_EPA_PACE_COLLECT_NONCE 0x038A
159 #define CMD_EPA_PACE_REPLAY 0x038B
160
161 #define CMD_ICLASS_CLONE 0x0390
162 #define CMD_ICLASS_DUMP 0x0391
163 #define CMD_SNOOP_ICLASS 0x0392
164 #define CMD_SIMULATE_TAG_ICLASS 0x0393
165 #define CMD_READER_ICLASS 0x0394
166 #define CMD_ICLASS_READBLOCK 0x0396
167 #define CMD_ICLASS_WRITEBLOCK 0x0397
168 #define CMD_ICLASS_EML_MEMSET 0x0398
169 #define CMD_ICLASS_CHECK 0x0399
170 #define CMD_ICLASS_READCHECK 0x039A
171
172 // For measurements of the antenna tuning
173 #define CMD_MEASURE_ANTENNA_TUNING 0x0400
174 #define CMD_MEASURE_ANTENNA_TUNING_HF 0x0401
175 #define CMD_MEASURED_ANTENNA_TUNING 0x0410
176 #define CMD_LISTEN_READER_FIELD 0x0420
177
178 // For direct FPGA control
179 #define CMD_FPGA_MAJOR_MODE_OFF 0x0500
180
181 // For mifare commands
182 #define CMD_MIFARE_SET_DBGMODE 0x0600
183 #define CMD_MIFARE_EML_MEMCLR 0x0601
184 #define CMD_MIFARE_EML_MEMSET 0x0602
185 #define CMD_MIFARE_EML_MEMGET 0x0603
186 #define CMD_MIFARE_EML_CARDLOAD 0x0604
187
188 // magic chinese card commands
189 #define CMD_MIFARE_CSETBLOCK 0x0605
190 #define CMD_MIFARE_CGETBLOCK 0x0606
191 #define CMD_MIFARE_CIDENT 0x0607
192 #define CMD_MIFARE_CWIPE 0x0608
193
194 #define CMD_SIMULATE_MIFARE_CARD 0x0610
195
196 #define CMD_READER_MIFARE 0x0611
197 #define CMD_MIFARE_NESTED 0x0612
198 #define CMD_MIFARE_ACQUIRE_ENCRYPTED_NONCES 0x0613
199
200 #define CMD_MIFARE_READBL 0x0620
201 #define CMD_MIFARE_READSC 0x0621
202 #define CMD_MIFARE_WRITEBL 0x0622
203 #define CMD_MIFARE_CHKKEYS 0x0623
204 #define CMD_MIFARE_PERSONALIZE_UID 0x0624
205 #define CMD_MIFARE_SNIFFER 0x0630
206
207 //ultralightC
208 #define CMD_MIFAREU_READBL 0x0720
209 #define CMD_MIFAREU_READCARD 0x0721
210 #define CMD_MIFAREU_WRITEBL 0x0722
211 #define CMD_MIFAREU_WRITEBL_COMPAT 0x0723
212 #define CMD_MIFAREUC_AUTH 0x0724
213 //0x0725 and 0x0726 no longer used
214 #define CMD_MIFAREUC_SETPWD 0x0727
215
216
217 // mifare desfire
218 #define CMD_MIFARE_DESFIRE_READBL 0x0728
219 #define CMD_MIFARE_DESFIRE_WRITEBL 0x0729
220 #define CMD_MIFARE_DESFIRE_AUTH1 0x072a
221 #define CMD_MIFARE_DESFIRE_AUTH2 0x072b
222 #define CMD_MIFARE_DES_READER 0x072c
223 #define CMD_MIFARE_DESFIRE_INFO 0x072d
224 #define CMD_MIFARE_DESFIRE 0x072e
225
226 #define CMD_HF_SNIFFER 0x0800
227 #define CMD_HF_PLOT 0x0801
228
229 #define CMD_UNKNOWN 0xFFFF
230
231
232 // Mifare simulation flags
233 #define FLAG_INTERACTIVE (1<<0)
234 #define FLAG_4B_UID_IN_DATA (1<<1)
235 #define FLAG_7B_UID_IN_DATA (1<<2)
236 #define FLAG_NR_AR_ATTACK (1<<4)
237 #define FLAG_RANDOM_NONCE (1<<5)
238
239
240 // iCLASS reader flags
241 #define FLAG_ICLASS_READER_INIT (1<<0)
242 #define FLAG_ICLASS_READER_CC (1<<1)
243 #define FLAG_ICLASS_READER_CSN (1<<2)
244 #define FLAG_ICLASS_READER_CONF (1<<3)
245 #define FLAG_ICLASS_READER_AA (1<<4)
246 #define FLAG_ICLASS_READER_CREDITKEY (1<<5)
247 #define FLAG_ICLASS_READER_CLEARTRACE (1<<6)
248
249
250 // iCLASS simulation modes
251 #define ICLASS_SIM_MODE_CSN 0
252 #define ICLASS_SIM_MODE_CSN_DEFAULT 1
253 #define ICLASS_SIM_MODE_READER_ATTACK 2
254 #define ICLASS_SIM_MODE_FULL 3
255 #define ICLASS_SIM_MODE_READER_ATTACK_KEYROLL 4
256 #define ICLASS_SIM_MODE_EXIT_AFTER_MAC 5 // note: device internal only
257
258
259 // hw tune args
260 #define FLAG_TUNE_LF 1
261 #define FLAG_TUNE_HF 2
262 #define FLAG_TUNE_ALL 3
263
264 // Hardware capabilities
265 #define HAS_EXTRA_FLASH_MEM (1 << 0)
266 #define HAS_SMARTCARD_SLOT (1 << 1)
267
268
269 // CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions:
270 /* Whether a bootloader that understands the common_area is present */
271 #define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0)
272
273 /* Whether a osimage that understands the common_area is present */
274 #define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1)
275
276 /* Set if the bootloader is currently executing */
277 #define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2)
278
279 /* Set if the OS is currently executing */
280 #define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3)
281
282 /* Set if this device understands the extend start flash command */
283 #define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4)
284
285 /* CMD_START_FLASH may have three arguments: start of area to flash,
286 end of area to flash, optional magic.
287 The bootrom will not allow to overwrite itself unless this magic
288 is given as third parameter */
289
290 #define START_FLASH_MAGIC 0x54494f44 // 'DOIT'
291
292 #endif
Impressum, Datenschutz