]>
cvs.zerfleddert.de Git - proxmark3-svn/blob - client/cmdlft55xx.h
1771742a09e1584f6bcb678738e40d8e47e73570
1 //-----------------------------------------------------------------------------
3 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
4 // at your option, any later version. See the LICENSE.txt file for the text of
6 //-----------------------------------------------------------------------------
7 // Low frequency T55xx commands
8 //-----------------------------------------------------------------------------
10 #ifndef CMDLFT55XX_H__
11 #define CMDLFT55XX_H__
14 #define T55X7_DEFAULT_CONFIG_BLOCK 0x000880E8 // compat mode, data rate 32, manchester, ST, 7 data blocks
15 #define T55X7_RAW_CONFIG_BLOCK 0x000880E0 // compat mode, data rate 32, manchester, 7 data blocks
17 #define T55X7_EM_UNIQUE_CONFIG_BLOCK 0x00148040 // emulate em4x02/unique - compat mode, manchester, data rate 64, 2 data blocks
20 // FDXB requires data inversion and BiPhase 57 is simply BipHase 50 inverted, so we can either do it using the modulation scheme or the inversion flag
21 // we've done both below to prove that it works either way, and the modulation value for BiPhase 50 in the Atmel data sheet of binary "10001" (17) is a typo,
22 // and it should actually be "10000" (16)
23 // #define T55X7_FDXB_CONFIG_BLOCK 903F8080 // emulate fdx-b - xtended mode, BiPhase ('57), data rate 32, 4 data blocks
24 #define T55X7_FDXB_CONFIG_BLOCK 0x903F0082 // emulate fdx-b - xtended mode, BiPhase ('50), invert data, data rate 32, 4 data blocks
25 #define T55X7_HID_26_CONFIG_BLOCK 0x00107060 // hid 26 bit - compat mode, FSK2a, data rate 50, 3 data blocks
26 #define T55X7_INDALA_64_CONFIG_BLOCK 0x00081040 // emulate indala 64 bit - compat mode, PSK1, psk carrier FC * 2, data rate 32, maxblock 2
27 #define T55X7_INDALA_224_CONFIG_BLOCK 0x000810E0 // emulate indala 224 bit - compat mode, PSK1, psk carrier FC * 2, data rate 32, maxblock 7
28 #define T55X7_GUARDPROXII_CONFIG_BLOCK 0x00150060 // bitrate 64pcb, Direct modulation, Biphase, 3 data blocks
29 #define T55X7_VIKING_CONFIG_BLOCK 0x00088040 // compat mode, data rate 32, Manchester, 2 data blocks
30 #define T55X7_NORALYS_CONFIG_BLOCK 0x00088C6A // compat mode, (NORALYS - KCP3000)
31 #define T55X7_IOPROX_CONFIG_BLOCK 0x00147040 // maxblock 2
32 #define T55X7_bin 0b0010
34 #define T5555_DEFAULT_CONFIG_BLOCK 0x6001F004 // data rate 64 , ask, manchester, 2 data blocks?
84 DEMOD_FSK
= 0xF0 , //generic FSK (auto detect FCs)
103 } t55xx_conf_block_t
;
104 t55xx_conf_block_t
Get_t55xx_Config ();
105 void Set_t55xx_Config ( t55xx_conf_block_t conf
);
108 int CmdLFT55XX ( const char * Cmd
);
109 int CmdT55xxSetConfig ( const char * Cmd
);
110 int CmdT55xxReadBlock ( const char * Cmd
);
111 int CmdT55xxWriteBlock ( const char * Cmd
);
112 int CmdT55xxReadTrace ( const char * Cmd
);
113 int CmdT55xxInfo ( const char * Cmd
);
114 int CmdT55xxDetect ( const char * Cmd
);
115 int CmdResetRead ( const char * Cmd
);
116 int CmdT55xxWipe ( const char * Cmd
);
117 int CmdT55xxBruteForce ( const char * Cmd
);
119 char * GetBitRateStr ( uint32_t id
);
120 char * GetSaferStr ( uint32_t id
);
121 char * GetModulationStr ( uint32_t id
);
122 char * GetModelStrFromCID ( uint32_t cid
);
123 char * GetSelectedModulationStr ( uint8_t id
);
124 uint32_t PackBits ( uint8_t start
, uint8_t len
, uint8_t * bitstream
);
125 void printT5xxHeader ( uint8_t page
);
126 void printT55xxBlock ( const char * demodStr
);
127 int printConfiguration ( t55xx_conf_block_t b
);
129 bool DecodeT55xxBlock ();
130 bool tryDetectModulation ();
131 bool test ( uint8_t mode
, uint8_t * offset
, int * fndBitRate
, uint8_t clk
, bool * Q5
);
132 int special ( const char * Cmd
);
133 int AquireData ( uint8_t page
, uint8_t block
, bool pwdmode
, uint32_t password
);
135 bool detectPassword ( int password
);
137 void printT55xxTrace ( t55xx_tracedata_t data
, uint8_t repeat
);
138 void printT5555Trace ( t5555_tracedata_t data
, uint8_t repeat
);