]> cvs.zerfleddert.de Git - proxmark3-svn/blob - include/usb_cmd.h
a9096154d5d69930a43d8b548e092c875393da97
[proxmark3-svn] / include / usb_cmd.h
1 //-----------------------------------------------------------------------------
2 // Jonathan Westhues, Mar 2006
3 // Edits by Gerhard de Koning Gans, Sep 2007
4 //
5 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
6 // at your option, any later version. See the LICENSE.txt file for the text of
7 // the license.
8 //-----------------------------------------------------------------------------
9 // Definitions for all the types of commands that may be sent over USB; our
10 // own protocol.
11 //-----------------------------------------------------------------------------
12
13 #ifndef __USB_CMD_H
14 #define __USB_CMD_H
15 #ifdef _MSC_VER
16 typedef DWORD uint32_t;
17 typedef BYTE uint8_t;
18 #define PACKED
19 // stuff
20 #else
21 #include <stdint.h>
22 #include <stdbool.h>
23 #define PACKED __attribute__((packed))
24 #endif
25
26 typedef struct {
27 uint32_t cmd;
28 uint32_t arg[3];
29 union {
30 uint8_t asBytes[48];
31 uint32_t asDwords[12];
32 } d;
33 } PACKED UsbCommand;
34
35 // For the bootloader
36 #define CMD_DEVICE_INFO 0x0000
37 #define CMD_SETUP_WRITE 0x0001
38 #define CMD_FINISH_WRITE 0x0003
39 #define CMD_HARDWARE_RESET 0x0004
40 #define CMD_START_FLASH 0x0005
41 #define CMD_NACK 0x00fe
42 #define CMD_ACK 0x00ff
43
44 // For general mucking around
45 #define CMD_DEBUG_PRINT_STRING 0x0100
46 #define CMD_DEBUG_PRINT_INTEGERS 0x0101
47 #define CMD_DEBUG_PRINT_BYTES 0x0102
48 #define CMD_LCD_RESET 0x0103
49 #define CMD_LCD 0x0104
50 #define CMD_BUFF_CLEAR 0x0105
51 #define CMD_READ_MEM 0x0106
52 #define CMD_VERSION 0x0107
53
54 // For low-frequency tags
55 #define CMD_READ_TI_TYPE 0x0202
56 #define CMD_WRITE_TI_TYPE 0x0203
57 #define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204
58 #define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205
59 #define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206
60 #define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207
61 #define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208
62 #define CMD_DOWNLOADED_SIM_SAMPLES_125K 0x0209
63 #define CMD_SIMULATE_TAG_125K 0x020A
64 #define CMD_HID_DEMOD_FSK 0x020B
65 #define CMD_HID_SIM_TAG 0x020C
66 #define CMD_SET_LF_DIVISOR 0x020D
67 #define CMD_LF_SIMULATE_BIDIR 0x020E
68 #define CMD_SET_ADC_MUX 0x020F
69 #define CMD_HID_CLONE_TAG 0x0210
70 #define CMD_EM410X_WRITE_TAG 0x0211
71
72 /* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */
73
74 // For the 13.56 MHz tags
75 #define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300
76 #define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443 0x0301
77 #define CMD_READ_SRI512_TAG 0x0303
78 #define CMD_READ_SRIX4K_TAG 0x0304
79 #define CMD_READER_ISO_15693 0x0310
80 #define CMD_SIMTAG_ISO_15693 0x0311
81 #define CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 0x0312
82 #define CMD_ISO_15693_COMMAND 0x0313
83 #define CMD_ISO_15693_COMMAND_DONE 0x0314
84 #define CMD_ISO_15693_FIND_AFI 0x0315
85 #define CMD_ISO_15693_DEBUG 0x0316
86 #define CMD_SIMULATE_TAG_HF_LISTEN 0x0380
87 #define CMD_SIMULATE_TAG_ISO_14443 0x0381
88 #define CMD_SNOOP_ISO_14443 0x0382
89 #define CMD_SNOOP_ISO_14443a 0x0383
90 #define CMD_SIMULATE_TAG_ISO_14443a 0x0384
91 #define CMD_READER_ISO_14443a 0x0385
92 #define CMD_SIMULATE_TAG_LEGIC_RF 0x0387
93 #define CMD_READER_LEGIC_RF 0x0388
94 #define CMD_WRITER_LEGIC_RF 0x0399
95
96 #define CMD_SNOOP_ICLASS 0x0392
97 #define CMD_SIMULATE_TAG_ICLASS 0x0393
98 #define CMD_READER_ICLASS 0x0394
99
100 // For measurements of the antenna tuning
101 #define CMD_MEASURE_ANTENNA_TUNING 0x0400
102 #define CMD_MEASURE_ANTENNA_TUNING_HF 0x0401
103 #define CMD_MEASURED_ANTENNA_TUNING 0x0410
104 #define CMD_LISTEN_READER_FIELD 0x0420
105
106 // For direct FPGA control
107 #define CMD_FPGA_MAJOR_MODE_OFF 0x0500
108
109 // For mifare commands
110 #define CMD_MIFARE_SET_DBGMODE 0x0600
111 #define CMD_MIFARE_EML_MEMCLR 0x0601
112 #define CMD_MIFARE_EML_MEMSET 0x0602
113 #define CMD_MIFARE_EML_MEMGET 0x0603
114 #define CMD_MIFARE_EML_CARDLOAD 0x0604
115
116 #define CMD_SIMULATE_MIFARE_CARD 0x0610
117
118 #define CMD_READER_MIFARE 0x0611
119 #define CMD_MIFARE_NESTED 0x0612
120
121 #define CMD_MIFARE_READBL 0x0620
122 #define CMD_MIFARE_READSC 0x0621
123 #define CMD_MIFARE_WRITEBL 0x0622
124 #define CMD_MIFARE_CHKKEYS 0x0623
125
126 #define CMD_UNKNOWN 0xFFFF
127
128 // CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions:
129 /* Whether a bootloader that understands the common_area is present */
130 #define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0)
131
132 /* Whether a osimage that understands the common_area is present */
133 #define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1)
134
135 /* Set if the bootloader is currently executing */
136 #define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2)
137
138 /* Set if the OS is currently executing */
139 #define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3)
140
141 /* Set if this device understands the extend start flash command */
142 #define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4)
143
144 /* CMD_START_FLASH may have three arguments: start of area to flash,
145 end of area to flash, optional magic.
146 The bootrom will not allow to overwrite itself unless this magic
147 is given as third parameter */
148
149 #define START_FLASH_MAGIC 0x54494f44 // 'DOIT'
150
151 #endif
Impressum, Datenschutz