]> cvs.zerfleddert.de Git - proxmark3-svn/blobdiff - armsrc/appmain.c
Add Viking demod,
[proxmark3-svn] / armsrc / appmain.c
index fb3c0f18ce22a5ccfdbc68599da9091ebf9a398f..e7324723f3049dc8ab3327f27d9f546f445827af 100644 (file)
 #include <hitag2.h>
 #include "lfsampling.h"
 #include "BigBuf.h"
+#include "mifareutil.h"
+#include "pcf7931.h"
 #ifdef WITH_LCD
  #include "LCD.h"
 #endif
 
+// Craig Young - 14a stand-alone code
+#ifdef WITH_ISO14443a_StandAlone
+ #include "iso14443a.h"
+#endif
+
 #define abs(x) ( ((x)<0) ? -(x) : (x) )
 
 //=============================================================================
@@ -261,11 +268,11 @@ void ReadMem(int addr)
 /* osimage version information is linked in */
 extern struct version_information version_information;
 /* bootrom version information is pointed to from _bootphase1_version_pointer */
-extern char *_bootphase1_version_pointer, _flash_start, _flash_end;
+extern char *_bootphase1_version_pointer, _flash_start, _flash_end, _bootrom_start, _bootrom_end, __data_src_start__;
 void SendVersion(void)
 {
-       char temp[512]; /* Limited data payload in USB packets */
-       DbpString("Prox/RFID mark3 RFID instrument");
+       char temp[USB_CMD_DATA_SIZE]; /* Limited data payload in USB packets */
+       char VersionString[USB_CMD_DATA_SIZE] = { '\0' };
 
        /* Try to find the bootrom version information. Expect to find a pointer at
         * symbol _bootphase1_version_pointer, perform slight sanity checks on the
@@ -273,33 +280,79 @@ void SendVersion(void)
         */
        char *bootrom_version = *(char**)&_bootphase1_version_pointer;
        if( bootrom_version < &_flash_start || bootrom_version >= &_flash_end ) {
-               DbpString("bootrom version information appears invalid");
+               strcat(VersionString, "bootrom version information appears invalid\n");
        } else {
                FormatVersionInformation(temp, sizeof(temp), "bootrom: ", bootrom_version);
-               DbpString(temp);
+               strncat(VersionString, temp, sizeof(VersionString) - strlen(VersionString) - 1);
        }
 
        FormatVersionInformation(temp, sizeof(temp), "os: ", &version_information);
-       DbpString(temp);
+       strncat(VersionString, temp, sizeof(VersionString) - strlen(VersionString) - 1);
+
+       FpgaGatherVersion(FPGA_BITSTREAM_LF, temp, sizeof(temp));
+       strncat(VersionString, temp, sizeof(VersionString) - strlen(VersionString) - 1);
+       FpgaGatherVersion(FPGA_BITSTREAM_HF, temp, sizeof(temp));
+       strncat(VersionString, temp, sizeof(VersionString) - strlen(VersionString) - 1);
 
-       FpgaGatherVersion(temp, sizeof(temp));
-       DbpString(temp);
-       // Send Chip ID
-       cmd_send(CMD_ACK,*(AT91C_DBGU_CIDR),0,0,NULL,0);
+       // Send Chip ID and used flash memory
+       uint32_t text_and_rodata_section_size = (uint32_t)&__data_src_start__ - (uint32_t)&_flash_start;
+       uint32_t compressed_data_section_size = common_area.arg1;
+       cmd_send(CMD_ACK, *(AT91C_DBGU_CIDR), text_and_rodata_section_size + compressed_data_section_size, 0, VersionString, strlen(VersionString));
 }
 
-#ifdef WITH_LF
-// samy's sniff and repeat routine
-void SamyRun()
+// measure the USB Speed by sending SpeedTestBufferSize bytes to client and measuring the elapsed time.
+// Note: this mimics GetFromBigbuf(), i.e. we have the overhead of the UsbCommand structure included.
+void printUSBSpeed(void) 
 {
-       DbpString("Stand-alone mode! No PC necessary.");
-       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+       Dbprintf("USB Speed:");
+       Dbprintf("  Sending USB packets to client...");
 
-       // 3 possible options? no just 2 for now
-#define OPTS 2
+       #define USB_SPEED_TEST_MIN_TIME 1500    // in milliseconds
+       uint8_t *test_data = BigBuf_get_addr();
+       uint32_t end_time;
 
-       int high[OPTS], low[OPTS];
+       uint32_t start_time = end_time = GetTickCount();
+       uint32_t bytes_transferred = 0;
+       
+       LED_B_ON();
+       while(end_time < start_time + USB_SPEED_TEST_MIN_TIME) {
+               cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K, 0, USB_CMD_DATA_SIZE, 0, test_data, USB_CMD_DATA_SIZE);
+               end_time = GetTickCount();
+               bytes_transferred += USB_CMD_DATA_SIZE;
+       }
+       LED_B_OFF();
+
+       Dbprintf("  Time elapsed:      %dms", end_time - start_time);
+       Dbprintf("  Bytes transferred: %d", bytes_transferred);
+       Dbprintf("  USB Transfer Speed PM3 -> Client = %d Bytes/s", 
+               1000 * bytes_transferred / (end_time - start_time));
+
+}
+       
+/**
+  * Prints runtime information about the PM3.
+**/
+void SendStatus(void)
+{
+       BigBuf_print_status();
+       Fpga_print_status();
+       printConfig(); //LF Sampling config
+       printUSBSpeed();
+       Dbprintf("Various");
+       Dbprintf("  MF_DBGLEVEL......%d", MF_DBGLEVEL);
+       Dbprintf("  ToSendMax........%d",ToSendMax);
+       Dbprintf("  ToSendBit........%d",ToSendBit);
+
+       cmd_send(CMD_ACK,1,0,0,0,0);
+}
 
+#if defined(WITH_ISO14443a_StandAlone) || defined(WITH_LF)
+
+#define OPTS 2
+
+void StandAloneMode()
+{
+       DbpString("Stand-alone mode! No PC necessary.");
        // Oooh pretty -- notify user we're in elite samy mode now
        LED(LED_RED,    200);
        LED(LED_ORANGE, 200);
@@ -311,6 +364,270 @@ void SamyRun()
        LED(LED_ORANGE, 200);
        LED(LED_RED,    200);
 
+}
+
+#endif
+
+
+
+#ifdef WITH_ISO14443a_StandAlone
+void StandAloneMode14a()
+{
+       StandAloneMode();
+       FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
+
+       int selected = 0;
+       int playing = 0, iGotoRecord = 0, iGotoClone = 0;
+       int cardRead[OPTS] = {0};
+       uint8_t readUID[10] = {0};
+       uint32_t uid_1st[OPTS]={0};
+       uint32_t uid_2nd[OPTS]={0};
+       uint32_t uid_tmp1 = 0;
+       uint32_t uid_tmp2 = 0;
+       iso14a_card_select_t hi14a_card[OPTS];
+
+       LED(selected + 1, 0);
+
+       for (;;)
+       {
+               usb_poll();
+               WDT_HIT();
+               SpinDelay(300);
+
+               if (iGotoRecord == 1 || cardRead[selected] == 0)
+               {
+                       iGotoRecord = 0;
+                       LEDsoff();
+                       LED(selected + 1, 0);
+                       LED(LED_RED2, 0);
+
+                       // record
+                       Dbprintf("Enabling iso14443a reader mode for [Bank: %u]...", selected);
+                       /* need this delay to prevent catching some weird data */
+                       SpinDelay(500);
+                       /* Code for reading from 14a tag */
+                       uint8_t uid[10]  ={0};
+                       uint32_t cuid;
+                       iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD);
+
+                       for ( ; ; )
+                       {
+                               WDT_HIT();
+                               if (BUTTON_PRESS()) {
+                                       if (cardRead[selected]) {
+                                               Dbprintf("Button press detected -- replaying card in bank[%d]", selected);
+                                               break;
+                                       }
+                                       else if (cardRead[(selected+1)%OPTS]) {
+                                               Dbprintf("Button press detected but no card in bank[%d] so playing from bank[%d]", selected, (selected+1)%OPTS);
+                                               selected = (selected+1)%OPTS;
+                                               break; // playing = 1;
+                                       }
+                                       else {
+                                               Dbprintf("Button press detected but no stored tag to play. (Ignoring button)");
+                                               SpinDelay(300);
+                                       }
+                               }
+                               if (!iso14443a_select_card(uid, &hi14a_card[selected], &cuid))
+                                       continue;
+                               else
+                               {
+                                       Dbprintf("Read UID:"); Dbhexdump(10,uid,0);
+                                       memcpy(readUID,uid,10*sizeof(uint8_t));
+                                       uint8_t *dst = (uint8_t *)&uid_tmp1;
+                                       // Set UID byte order
+                                       for (int i=0; i<4; i++)
+                                               dst[i] = uid[3-i];
+                                       dst = (uint8_t *)&uid_tmp2;
+                                       for (int i=0; i<4; i++)
+                                               dst[i] = uid[7-i];
+                                       if (uid_1st[(selected+1)%OPTS] == uid_tmp1 && uid_2nd[(selected+1)%OPTS] == uid_tmp2) {
+                                               Dbprintf("Card selected has same UID as what is stored in the other bank. Skipping.");
+                                       }
+                                       else {
+                                               if (uid_tmp2) {
+                                                       Dbprintf("Bank[%d] received a 7-byte UID",selected);
+                                                       uid_1st[selected] = (uid_tmp1)>>8;
+                                                       uid_2nd[selected] = (uid_tmp1<<24) + (uid_tmp2>>8);
+                                               }
+                                               else {
+                                                       Dbprintf("Bank[%d] received a 4-byte UID",selected);
+                                                       uid_1st[selected] = uid_tmp1;
+                                                       uid_2nd[selected] = uid_tmp2;
+                                               }
+                                               break;
+                                       }
+                               }
+                       }
+                       Dbprintf("ATQA = %02X%02X",hi14a_card[selected].atqa[0],hi14a_card[selected].atqa[1]);
+                       Dbprintf("SAK = %02X",hi14a_card[selected].sak);
+                       LEDsoff();
+                       LED(LED_GREEN,  200);
+                       LED(LED_ORANGE, 200);
+                       LED(LED_GREEN,  200);
+                       LED(LED_ORANGE, 200);
+
+                       LEDsoff();
+                       LED(selected + 1, 0);
+
+                       // Next state is replay:
+                       playing = 1;
+
+                       cardRead[selected] = 1;
+               }
+               /* MF Classic UID clone */
+               else if (iGotoClone==1)
+               {
+                       iGotoClone=0;
+                       LEDsoff();
+                       LED(selected + 1, 0);
+                       LED(LED_ORANGE, 250);
+
+
+                       // record
+                       Dbprintf("Preparing to Clone card [Bank: %x]; uid: %08x", selected, uid_1st[selected]);
+
+                       // wait for button to be released
+                       while(BUTTON_PRESS())
+                       {
+                               // Delay cloning until card is in place
+                               WDT_HIT();
+                       }
+                       Dbprintf("Starting clone. [Bank: %u]", selected);
+                       // need this delay to prevent catching some weird data
+                       SpinDelay(500);
+                       // Begin clone function here:
+                       /* Example from client/mifarehost.c for commanding a block write for "magic Chinese" cards:
+                                       UsbCommand c = {CMD_MIFARE_CSETBLOCK, {wantWipe, params & (0xFE | (uid == NULL ? 0:1)), blockNo}};
+                                       memcpy(c.d.asBytes, data, 16);
+                                       SendCommand(&c);
+
+                                       Block read is similar:
+                                       UsbCommand c = {CMD_MIFARE_CGETBLOCK, {params, 0, blockNo}};
+                                       We need to imitate that call with blockNo 0 to set a uid.
+
+                                       The get and set commands are handled in this file:
+                                       // Work with "magic Chinese" card
+                                       case CMD_MIFARE_CSETBLOCK:
+                                               MifareCSetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+                                               break;
+                                       case CMD_MIFARE_CGETBLOCK:
+                                               MifareCGetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+                                               break;
+
+                               mfCSetUID provides example logic for UID set workflow:
+                                       -Read block0 from card in field with MifareCGetBlock()
+                                       -Configure new values without replacing reserved bytes
+                                                       memcpy(block0, uid, 4); // Copy UID bytes from byte array
+                                                       // Mifare UID BCC
+                                                       block0[4] = block0[0]^block0[1]^block0[2]^block0[3]; // BCC on byte 5
+                                                       Bytes 5-7 are reserved SAK and ATQA for mifare classic
+                                       -Use mfCSetBlock(0, block0, oldUID, wantWipe, CSETBLOCK_SINGLE_OPER) to write it
+                       */
+                       uint8_t oldBlock0[16] = {0}, newBlock0[16] = {0}, testBlock0[16] = {0};
+                       // arg0 = Flags == CSETBLOCK_SINGLE_OPER=0x1F, arg1=returnSlot, arg2=blockNo
+                       MifareCGetBlock(0x3F, 1, 0, oldBlock0);
+                       if (oldBlock0[0] == 0 && oldBlock0[0] == oldBlock0[1]  && oldBlock0[1] == oldBlock0[2] && oldBlock0[2] == oldBlock0[3]) {
+                               Dbprintf("No changeable tag detected. Returning to replay mode for bank[%d]", selected);
+                               playing = 1;
+                       }
+                       else {
+                               Dbprintf("UID from target tag: %02X%02X%02X%02X", oldBlock0[0],oldBlock0[1],oldBlock0[2],oldBlock0[3]);
+                               memcpy(newBlock0,oldBlock0,16);
+                               // Copy uid_1st for bank (2nd is for longer UIDs not supported if classic)
+
+                               newBlock0[0] = uid_1st[selected]>>24;
+                               newBlock0[1] = 0xFF & (uid_1st[selected]>>16);
+                               newBlock0[2] = 0xFF & (uid_1st[selected]>>8);
+                               newBlock0[3] = 0xFF & (uid_1st[selected]);
+                               newBlock0[4] = newBlock0[0]^newBlock0[1]^newBlock0[2]^newBlock0[3];
+                               // arg0 = needWipe, arg1 = workFlags, arg2 = blockNo, datain
+                               MifareCSetBlock(0, 0xFF,0, newBlock0);
+                               MifareCGetBlock(0x3F, 1, 0, testBlock0);
+                               if (memcmp(testBlock0,newBlock0,16)==0)
+                               {
+                                       DbpString("Cloned successfull!");
+                                       cardRead[selected] = 0; // Only if the card was cloned successfully should we clear it
+                                       playing = 0;
+                                       iGotoRecord = 1;
+                                       selected = (selected+1) % OPTS;
+                               }
+                               else {
+                                       Dbprintf("Clone failed. Back to replay mode on bank[%d]", selected);
+                                       playing = 1;
+                               }
+                       }
+                       LEDsoff();
+                       LED(selected + 1, 0);
+
+               }
+               // Change where to record (or begin playing)
+               else if (playing==1) // button_pressed == BUTTON_SINGLE_CLICK && cardRead[selected])
+               {
+                       LEDsoff();
+                       LED(selected + 1, 0);
+
+                       // Begin transmitting
+                       if (playing)
+                       {
+                               LED(LED_GREEN, 0);
+                               DbpString("Playing");
+                               for ( ; ; ) {
+                                       WDT_HIT();
+                                       int button_action = BUTTON_HELD(1000);
+                                       if (button_action == 0) { // No button action, proceed with sim
+                                               uint8_t data[512] = {0}; // in case there is a read command received we shouldn't break
+                                               Dbprintf("Simulating ISO14443a tag with uid[0]: %08x, uid[1]: %08x [Bank: %u]", uid_1st[selected],uid_2nd[selected],selected);
+                                               if (hi14a_card[selected].sak == 8 && hi14a_card[selected].atqa[0] == 4 && hi14a_card[selected].atqa[1] == 0) {
+                                                       DbpString("Mifare Classic");
+                                                       SimulateIso14443aTag(1,uid_1st[selected], uid_2nd[selected], data); // Mifare Classic
+                                               }
+                                               else if (hi14a_card[selected].sak == 0 && hi14a_card[selected].atqa[0] == 0x44 && hi14a_card[selected].atqa[1] == 0) {
+                                                       DbpString("Mifare Ultralight");
+                                                       SimulateIso14443aTag(2,uid_1st[selected],uid_2nd[selected],data); // Mifare Ultralight
+                                               }
+                                               else if (hi14a_card[selected].sak == 20 && hi14a_card[selected].atqa[0] == 0x44 && hi14a_card[selected].atqa[1] == 3) {
+                                                       DbpString("Mifare DESFire");
+                                                       SimulateIso14443aTag(3,uid_1st[selected],uid_2nd[selected],data); // Mifare DESFire
+                                               }
+                                               else {
+                                                       Dbprintf("Unrecognized tag type -- defaulting to Mifare Classic emulation");
+                                                       SimulateIso14443aTag(1,uid_1st[selected], uid_2nd[selected], data);
+                                               }
+                                       }
+                                       else if (button_action == BUTTON_SINGLE_CLICK) {
+                                               selected = (selected + 1) % OPTS;
+                                               Dbprintf("Done playing. Switching to record mode on bank %d",selected);
+                                               iGotoRecord = 1;
+                                               break;
+                                       }
+                                       else if (button_action == BUTTON_HOLD) {
+                                               Dbprintf("Playtime over. Begin cloning...");
+                                               iGotoClone = 1;
+                                               break;
+                                       }
+                                       WDT_HIT();
+                               }
+
+                               /* We pressed a button so ignore it here with a delay */
+                               SpinDelay(300);
+                               LEDsoff();
+                               LED(selected + 1, 0);
+                       }
+                       else
+                               while(BUTTON_PRESS())
+                                       WDT_HIT();
+               }
+       }
+}
+#elif WITH_LF
+// samy's sniff and repeat routine
+void SamyRun()
+{
+       StandAloneMode();
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+
+       int high[OPTS], low[OPTS];
        int selected = 0;
        int playing = 0;
        int cardRead = 0;
@@ -321,7 +638,7 @@ void SamyRun()
        for (;;)
        {
                usb_poll();
-    WDT_HIT();
+               WDT_HIT();
 
                // Was our button held down or pressed?
                int button_pressed = BUTTON_HELD(1000);
@@ -434,8 +751,8 @@ void SamyRun()
                }
        }
 }
-#endif
 
+#endif
 /*
 OBJECTIVE
 Listen and detect an external reader. Determine the best location
@@ -629,7 +946,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        CmdIOdemodFSK(c->arg[0], 0, 0, 1);
                        break;
                case CMD_IO_CLONE_TAG:
-                       CopyIOtoT55x7(c->arg[0], c->arg[1], c->d.asBytes[0]);
+                       CopyIOtoT55x7(c->arg[0], c->arg[1]);
                        break;
                case CMD_EM410X_DEMOD:
                        CmdEM410xdemod(c->arg[0], 0, 0, 1);
@@ -658,17 +975,22 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        CopyIndala224toT55x7(c->d.asDwords[0], c->d.asDwords[1], c->d.asDwords[2], c->d.asDwords[3], c->d.asDwords[4], c->d.asDwords[5], c->d.asDwords[6]);
                        break;
                case CMD_T55XX_READ_BLOCK:
-                       T55xxReadBlock(c->arg[1], c->arg[2],c->d.asBytes[0]);
+                       T55xxReadBlock(c->arg[0], c->arg[1], c->arg[2]);
                        break;
                case CMD_T55XX_WRITE_BLOCK:
                        T55xxWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
                        break;
-               case CMD_T55XX_READ_TRACE:
-                       T55xxReadTrace();
+               case CMD_T55XX_WAKEUP:
+                       T55xxWakeUp(c->arg[0]);
+                       break;
+               case CMD_T55XX_RESET_READ:
+                       T55xxResetRead();
                        break;
                case CMD_PCF7931_READ:
                        ReadPCF7931();
-                       cmd_send(CMD_ACK,0,0,0,0,0);
+                       break;
+               case CMD_PCF7931_WRITE:
+                       WritePCF7931(c->d.asBytes[0],c->d.asBytes[1],c->d.asBytes[2],c->d.asBytes[3],c->d.asBytes[4],c->d.asBytes[5],c->d.asBytes[6], c->d.asBytes[9], c->d.asBytes[7]-128,c->d.asBytes[8]-128, c->arg[0], c->arg[1], c->arg[2]);
                        break;
                case CMD_EM4X_READ_WORD:
                        EM4xReadWord(c->arg[1], c->arg[2],c->d.asBytes[0]);
@@ -676,6 +998,9 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_EM4X_WRITE_WORD:
                        EM4xWriteWord(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
                        break;
+               case CMD_AWID_DEMOD_FSK: // Set realtime AWID demodulation
+                       CmdAWIDdemodFSK(c->arg[0], 0, 0, 1);
+                       break;
 #endif
 
 #ifdef WITH_HITAG
@@ -764,6 +1089,9 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_EPA_PACE_COLLECT_NONCE:
                        EPA_PACE_Collect_Nonce(c);
                        break;
+               case CMD_EPA_PACE_REPLAY:
+                       EPA_PACE_Replay(c);
+                       break;
                        
                case CMD_READER_MIFARE:
                        ReaderMifare(c->arg[0]);
@@ -852,11 +1180,34 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        ReaderIClass(c->arg[0]);
                        break;
                case CMD_READER_ICLASS_REPLAY:
-                   ReaderIClass_Replay(c->arg[0], c->d.asBytes);
+                       ReaderIClass_Replay(c->arg[0], c->d.asBytes);
                        break;
-       case CMD_ICLASS_EML_MEMSET:
+               case CMD_ICLASS_EML_MEMSET:
                        emlSet(c->d.asBytes,c->arg[0], c->arg[1]);
                        break;
+               case CMD_ICLASS_WRITEBLOCK:
+                       iClass_WriteBlock(c->arg[0], c->d.asBytes);
+                       break;
+               case CMD_ICLASS_READCHECK:  // auth step 1
+                       iClass_ReadCheck(c->arg[0], c->arg[1]);
+                       break;
+               case CMD_ICLASS_READBLOCK:
+                       iClass_ReadBlk(c->arg[0]);
+                       break;
+               case CMD_ICLASS_AUTHENTICATION: //check
+                       iClass_Authentication(c->d.asBytes);
+                       break;
+               case CMD_ICLASS_DUMP:
+                       iClass_Dump(c->arg[0], c->arg[1]);
+                       break;
+               case CMD_ICLASS_CLONE:
+                       iClass_Clone(c->arg[0], c->arg[1], c->d.asBytes);
+                       break;
+#endif
+#ifdef WITH_HFSNOOP
+               case CMD_HF_SNIFFER:
+                       HfSnoop(c->arg[0], c->arg[1]);
+                       break;
 #endif
 
                case CMD_BUFF_CLEAR:
@@ -921,7 +1272,12 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_VERSION:
                        SendVersion();
                        break;
-
+               case CMD_STATUS:
+                       SendStatus();
+                       break;
+               case CMD_PING:
+                       cmd_send(CMD_ACK,0,0,0,0,0);
+                       break;
 #ifdef WITH_LCD
                case CMD_LCD_RESET:
                        LCDReset();
@@ -989,7 +1345,7 @@ void  __attribute__((noreturn)) AppMain(void)
        AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_PCK0;
        // PCK0 is PLL clock / 4 = 96Mhz / 4 = 24Mhz
        AT91C_BASE_PMC->PMC_PCKR[0] = AT91C_PMC_CSS_PLL_CLK |
-               AT91C_PMC_PRES_CLK_4;
+               AT91C_PMC_PRES_CLK_4; //  4 for 24Mhz pck0, 2 for 48 MHZ pck0
        AT91C_BASE_PIOA->PIO_OER = GPIO_PCK0;
 
        // Reset SPI
@@ -1020,8 +1376,16 @@ void  __attribute__((noreturn)) AppMain(void)
                WDT_HIT();
 
 #ifdef WITH_LF
+#ifndef WITH_ISO14443a_StandAlone
                if (BUTTON_HELD(1000) > 0)
                        SamyRun();
+#endif
+#endif
+#ifdef WITH_ISO14443a
+#ifdef WITH_ISO14443a_StandAlone
+               if (BUTTON_HELD(1000) > 0)
+                       StandAloneMode14a();
+#endif
 #endif
        }
 }
Impressum, Datenschutz