fixed missing header

[proxmark3-svn] / client / flash.c

diff --git a/client/flash.c b/client/flash.c
index df81a90ce45dfbf4f4c5352a1598918180ebad89..8fe874e5cab6d0722def4396280073e88e018aa4 100644 (file)
--- a/client/flash.c
+++ b/client/flash.c
@@ -250,6 +250,7 @@ int flash_load(flash_file_t *ctx, const char *name, int can_write_bl)
        if (res < 0)
                goto fail;
 
+       free(phdrs);
        fclose(fd);
        ctx->filename = name;
        return 0;
@@ -266,11 +267,11 @@ fail:
 // Get the state of the proxmark, backwards compatible
 static int get_proxmark_state(uint32_t *state)
 {
-       UsbCommand c;
+       HidCommand c;
        c.cmd = CMD_DEVICE_INFO;
-       SendCommand(&c);
+       SendCommand_(&c);
 
-       UsbCommand resp;
+       HidCommand resp;
        ReceiveCommand(&resp);
 
        // Three outcomes:
@@ -312,7 +313,7 @@ static int enter_bootloader(void)
 
        if (state & DEVICE_INFO_FLAG_CURRENT_MODE_OS) {
                fprintf(stderr,"Entering bootloader...\n");
-               UsbCommand c;
+               HidCommand c;
                memset(&c, 0, sizeof (c));
 
                if ((state & DEVICE_INFO_FLAG_BOOTROM_PRESENT)
@@ -321,12 +322,12 @@ static int enter_bootloader(void)
                        // New style handover: Send CMD_START_FLASH, which will reset the board
                        // and enter the bootrom on the next boot.
                        c.cmd = CMD_START_FLASH;
-                       SendCommand(&c);
+                       SendCommand_(&c);
                        fprintf(stderr,"(Press and release the button only to abort)\n");
                } else {
                        // Old style handover: Ask the user to press the button, then reset the board
                        c.cmd = CMD_HARDWARE_RESET;
-                       SendCommand(&c);
+                       SendCommand_(&c);
                        fprintf(stderr,"Press and hold down button NOW if your bootloader requires it.\n");
                }
                fprintf(stderr,"Waiting for Proxmark to reappear on USB...");
@@ -348,7 +349,7 @@ static int enter_bootloader(void)
 
 static int wait_for_ack(void)
 {
-       UsbCommand ack;
+       HidCommand ack;
        ReceiveCommand(&ack);
        if (ack.cmd != CMD_ACK) {
                printf("Error: Unexpected reply 0x%04x (expected ACK)\n", ack.cmd);
@@ -371,7 +372,7 @@ int flash_start_flashing(int enable_bl_writes)
        if (state & DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH) {
                // This command is stupid. Why the heck does it care which area we're
                // flashing, as long as it's not the bootloader area? The mind boggles.
-               UsbCommand c = {CMD_START_FLASH};
+               HidCommand c = {CMD_START_FLASH};
 
                if (enable_bl_writes) {
                        c.arg[0] = FLASH_START;
@@ -382,7 +383,7 @@ int flash_start_flashing(int enable_bl_writes)
                        c.arg[1] = FLASH_END;
                        c.arg[2] = 0;
                }
-               SendCommand(&c);
+               SendCommand_(&c);
                return wait_for_ack();
        } else {
                fprintf(stderr, "Note: Your bootloader does not understand the new START_FLASH command\n");
@@ -399,11 +400,11 @@ static int write_block(uint32_t address, uint8_t *data, uint32_t length)
        memset(block_buf, 0xFF, BLOCK_SIZE);
        memcpy(block_buf, data, length);
 
-       UsbCommand c = {CMD_SETUP_WRITE};
+       HidCommand c = {CMD_SETUP_WRITE};
        for (int i = 0; i < 240; i += 48) {
                memcpy(c.d.asBytes, block_buf + i, 48);
                c.arg[0] = i / 4;
-               SendCommand(&c);
+               SendCommand_(&c);
                if (wait_for_ack() < 0)
                        return -1;
        }
@@ -411,7 +412,7 @@ static int write_block(uint32_t address, uint8_t *data, uint32_t length)
        c.cmd = CMD_FINISH_WRITE;
        c.arg[0] = address;
        memcpy(c.d.asBytes, block_buf+240, 16);
-       SendCommand(&c);
+       SendCommand_(&c);
        return wait_for_ack();
 }
 
@@ -471,7 +472,7 @@ void flash_free(flash_file_t *ctx)
 
 // just reset the unit
 int flash_stop_flashing(void) {
-       UsbCommand c = {CMD_HARDWARE_RESET};
-       SendCommand(&c);
+       HidCommand c = {CMD_HARDWARE_RESET};
+       SendCommand_(&c);
        return 0;
 }