#include "mifarecmd.h"\r
#include "apps.h"\r
#include "util.h"\r
-//#include "../client/loclass/des.h"\r
-#include "des.h"\r
#include "crc.h"\r
\r
//-----------------------------------------------------------------------------\r
struct Crypto1State *pcs;\r
pcs = &mpcs;\r
\r
- // clear trace\r
- clear_trace();\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
+ clear_trace();\r
+\r
LED_A_ON();\r
LED_B_OFF();\r
LED_C_OFF();\r
LEDsoff();\r
}\r
\r
+void MifareUC_Auth(uint8_t arg0, uint8_t *keybytes){\r
\r
-void MifareUC_Auth1(uint8_t arg0, uint8_t *datain){\r
+ bool turnOffField = (arg0 == 1);\r
\r
- byte_t isOK = 0;\r
- byte_t dataoutbuf[16] = {0x00};\r
- uint8_t uid[10] = {0x00};\r
- uint32_t cuid;\r
+ LED_A_ON(); LED_B_OFF(); LED_C_OFF();\r
\r
- LED_A_ON();\r
- LED_B_OFF();\r
- LED_C_OFF();\r
- \r
- clear_trace();\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
- if(!iso14443a_select_card(uid, NULL, &cuid)) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR)\r
- Dbprintf("Can't select card");\r
+ clear_trace();\r
+\r
+ if(!iso14443a_select_card(NULL, NULL, NULL)) {\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card");\r
OnError(0);\r
return;\r
};\r
\r
- if(mifare_ultra_auth1(cuid, dataoutbuf)){\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR) \r
- Dbprintf("Authentication part1: Fail.");\r
+ if(!mifare_ultra_auth(keybytes)){\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Authentication failed");\r
OnError(1);\r
return;\r
}\r
\r
- isOK = 1;\r
- if (MF_DBGLEVEL >= MF_DBG_EXTENDED)\r
- DbpString("AUTH 1 FINISHED");\r
- \r
- cmd_send(CMD_ACK,isOK,cuid,0,dataoutbuf,11);\r
- LEDsoff();\r
-}\r
-void MifareUC_Auth2(uint32_t arg0, uint8_t *datain){\r
-\r
- uint32_t cuid = arg0;\r
- uint8_t key[16] = {0x00};\r
- byte_t isOK = 0;\r
- byte_t dataoutbuf[16] = {0x00};\r
- \r
- memcpy(key, datain, 16);\r
- \r
- LED_A_ON();\r
- LED_B_OFF();\r
- LED_C_OFF();\r
- \r
- if(mifare_ultra_auth2(cuid, key, dataoutbuf)){\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR) \r
- Dbprintf("Authentication part2: Fail...");\r
- OnError(1);\r
- return; \r
+ if (turnOffField) {\r
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
+ LEDsoff();\r
}\r
- \r
- isOK = 1;\r
- if (MF_DBGLEVEL >= MF_DBG_EXTENDED)\r
- DbpString("AUTH 2 FINISHED");\r
- \r
- cmd_send(CMD_ACK,isOK,0,0,dataoutbuf,11);\r
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
- LEDsoff();\r
+ cmd_send(CMD_ACK,1,0,0,0,0);\r
}\r
\r
+// Arg0 = BlockNo,\r
+// Arg1 = UsePwd bool\r
+// datain = PWD bytes,\r
void MifareUReadBlock(uint8_t arg0, uint8_t arg1, uint8_t *datain)\r
{\r
uint8_t blockNo = arg0;\r
byte_t dataout[16] = {0x00};\r
- uint8_t uid[10] = {0x00};\r
- uint8_t key[8] = {0x00};\r
- uint32_t cuid;\r
- bool usePwd = false;\r
- \r
- usePwd = (arg1 == 1);\r
- \r
- // use password\r
- if ( usePwd )\r
- memcpy(key, datain, 8);\r
- \r
+ bool useKey = (arg1 == 1); //UL_C\r
+ bool usePwd = (arg1 == 2); //UL_EV1/NTAG\r
+\r
+ LEDsoff();\r
LED_A_ON();\r
- LED_B_OFF();\r
- LED_C_OFF();\r
- \r
- clear_trace();\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
- \r
- int len = iso14443a_select_card(uid, NULL, &cuid);\r
+\r
+ clear_trace();\r
+\r
+ int len = iso14443a_select_card(NULL, NULL, NULL);\r
if(!len) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card (RC:%d)",len);\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card (RC:%02X)",len);\r
OnError(1);\r
return;\r
- };\r
- \r
- // authenticate here.\r
- if ( usePwd ) {\r
-\r
- uint8_t a[8] = { 0x01 };\r
- uint8_t b[8] = { 0x00 };\r
- uint8_t enc_b[8] = { 0x00 };\r
- uint8_t ab[16] = { 0x00 };\r
- \r
- uint8_t transKey[8] = { 0x00 };\r
- \r
- uint16_t len;\r
- uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE];\r
- uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE];\r
- \r
- len = mifare_sendcmd_short(NULL, 1, 0x1A, 0x00, receivedAnswer,receivedAnswerPar ,NULL);\r
- if (len == 1) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR)\r
- Dbprintf("Cmd Error: %02x", receivedAnswer[0]);\r
- OnError(1);\r
- return;\r
- }\r
- \r
-// memcpy(dataout, receivedAnswer, 11);\r
- \r
- // tag nonce.\r
- memcpy(enc_b,receivedAnswer+1,8);\r
-\r
- // decrypt nonce.\r
- des_dec(enc_b, b, key );\r
-\r
- Dbprintf("enc_B: %02x %02x %02x %02x %02x %02x %02x %02x", enc_b[0],enc_b[1],enc_b[2],enc_b[3],enc_b[4],enc_b[5],enc_b[6],enc_b[7] );\r
-\r
- rol(b,8);\r
- \r
- memcpy(ab ,a,8);\r
- memcpy(ab+8,b,8);\r
-\r
- Dbprintf("AB: %02x %02x %02x %02x %02x %02x %02x %02x", ab[0],ab[1],ab[2],ab[3],ab[4],ab[5],ab[6],ab[7] );\r
- Dbprintf("AB: %02x %02x %02x %02x %02x %02x %02x %02x", ab[8],ab[9],ab[10],ab[11],ab[12],ab[13],ab[14],ab[15] );\r
-\r
- // encrypt\r
- des_enc(ab, ab, key);\r
+ }\r
\r
- Dbprintf("e_AB: %02x %02x %02x %02x %02x %02x %02x %02x", ab[0],ab[1],ab[2],ab[3],ab[4],ab[5],ab[6],ab[7] );\r
- Dbprintf("e_AB: %02x %02x %02x %02x %02x %02x %02x %02x", ab[8],ab[9],ab[10],ab[11],ab[12],ab[13],ab[14],ab[15] );\r
+ // UL-C authentication\r
+ if ( useKey ) {\r
+ uint8_t key[16] = {0x00};\r
+ memcpy(key, datain, sizeof(key) );\r
\r
- len = mifare_sendcmd_short_mfucauth(NULL, 1, 0xAF, ab, receivedAnswer, receivedAnswerPar, NULL);\r
- if (len == 1) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR)\r
- Dbprintf("Cmd Error: %02x", receivedAnswer[0]);\r
+ if ( !mifare_ultra_auth(key) ) {\r
OnError(1);\r
return;\r
}\r
- \r
- // \r
- memcpy(transKey, receivedAnswer+1, 8);\r
- Dbprintf("TRANSACTIONKEY: %02x %02x %02x %02x %02x %02x %02x %02x", transKey[0],transKey[1],transKey[2],transKey[3],\r
- transKey[4],transKey[5],transKey[6],transKey[7] );\r
}\r
- \r
- len = mifare_ultra_readblock(cuid, blockNo, dataout);\r
- if(len) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Read block error");\r
+\r
+ // UL-EV1 / NTAG authentication\r
+ if ( usePwd ) {\r
+ uint8_t pwd[4] = {0x00};\r
+ memcpy(pwd, datain, 4);\r
+ uint8_t pack[4] = {0,0,0,0};\r
+ if (!mifare_ul_ev1_auth(pwd, pack)) {\r
+ OnError(1);\r
+ return;\r
+ }\r
+ } \r
+\r
+ if( mifare_ultra_readblock(blockNo, dataout) ) {\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Read block error");\r
OnError(2);\r
return;\r
- };\r
- \r
- len = mifare_ultra_halt(cuid);\r
- if(len) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Halt error");\r
+ }\r
+\r
+ if( mifare_ultra_halt() ) {\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Halt error");\r
OnError(3);\r
return;\r
- };\r
- \r
+ }\r
+\r
cmd_send(CMD_ACK,1,0,0,dataout,16);\r
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
LEDsoff();\r
struct Crypto1State *pcs;\r
pcs = &mpcs;\r
\r
- // clear trace\r
- clear_trace();\r
-\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
+ clear_trace();\r
+\r
LED_A_ON();\r
LED_B_OFF();\r
LED_C_OFF();\r
isOK = 0;\r
if (MF_DBGLEVEL >= 1) Dbprintf("Can't select card");\r
}\r
-\r
+ \r
\r
if(isOK && mifare_classic_auth(pcs, cuid, FirstBlockOfSector(sectorNo), keyType, ui64Key, AUTH_FIRST)) {\r
isOK = 0;\r
LEDsoff();\r
}\r
\r
-void MifareUReadCard(uint8_t arg0, int arg1, uint8_t *datain)\r
+// arg0 = blockNo (start)\r
+// arg1 = Pages (number of blocks)\r
+// arg2 = useKey\r
+// datain = KEY bytes\r
+void MifareUReadCard(uint8_t arg0, uint16_t arg1, uint8_t arg2, uint8_t *datain)\r
{\r
- // params\r
- uint8_t sectorNo = arg0;\r
- int Pages = arg1;\r
- int count_Pages = 0;\r
- byte_t dataout[176] = {0x00};;\r
- uint8_t uid[10] = {0x00};\r
- uint32_t cuid;\r
-\r
+ LEDsoff();\r
LED_A_ON();\r
- LED_B_OFF();\r
- LED_C_OFF();\r
+ iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
- if (MF_DBGLEVEL >= MF_DBG_ALL) \r
- Dbprintf("Pages %d",Pages);\r
- \r
+ // free eventually allocated BigBuf memory\r
+ BigBuf_free();\r
clear_trace();\r
- iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
- int len = iso14443a_select_card(uid, NULL, &cuid);\r
- \r
+ // params\r
+ uint8_t blockNo = arg0;\r
+ uint16_t blocks = arg1;\r
+ bool useKey = (arg2 == 1); //UL_C\r
+ bool usePwd = (arg2 == 2); //UL_EV1/NTAG\r
+ uint32_t countblocks = 0;\r
+ uint8_t *dataout = BigBuf_malloc(CARD_MEMORY_SIZE);\r
+ if (dataout == NULL){\r
+ Dbprintf("out of memory");\r
+ OnError(1);\r
+ return;\r
+ }\r
+\r
+ int len = iso14443a_select_card(NULL, NULL, NULL);\r
if (!len) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR)\r
- Dbprintf("Can't select card (RC:%d)",len);\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card (RC:%d)",len);\r
OnError(1);\r
return;\r
}\r
- \r
- for (int i = 0; i < Pages; i++){\r
- \r
- len = mifare_ultra_readblock(cuid, sectorNo * 4 + i, dataout + 4 * i);\r
+\r
+ // UL-C authentication\r
+ if ( useKey ) {\r
+ uint8_t key[16] = {0x00};\r
+ memcpy(key, datain, sizeof(key) );\r
+\r
+ if ( !mifare_ultra_auth(key) ) {\r
+ OnError(1);\r
+ return;\r
+ }\r
+ }\r
+\r
+ // UL-EV1 / NTAG authentication\r
+ if (usePwd) {\r
+ uint8_t pwd[4] = {0x00};\r
+ memcpy(pwd, datain, sizeof(pwd));\r
+ uint8_t pack[4] = {0,0,0,0};\r
+\r
+ if (!mifare_ul_ev1_auth(pwd, pack)){\r
+ OnError(1);\r
+ return; \r
+ }\r
+ }\r
+\r
+ for (int i = 0; i < blocks; i++){\r
+ if ((i*4) + 4 >= CARD_MEMORY_SIZE) {\r
+ Dbprintf("Data exceeds buffer!!");\r
+ break;\r
+ }\r
+\r
+ len = mifare_ultra_readblock(blockNo + i, dataout + 4 * i);\r
\r
if (len) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR)\r
- Dbprintf("Read block %d error",i);\r
- OnError(2);\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Read block %d error",i);\r
+ // if no blocks read - error out\r
+ if (i==0){\r
+ OnError(2);\r
return;\r
+ } else {\r
+ //stop at last successful read block and return what we got\r
+ break;\r
+ }\r
} else {\r
- count_Pages++;\r
+ countblocks++;\r
}\r
}\r
- \r
- len = mifare_ultra_halt(cuid);\r
+\r
+ len = mifare_ultra_halt();\r
if (len) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR)\r
- Dbprintf("Halt error");\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Halt error");\r
OnError(3);\r
return;\r
}\r
- \r
- if (MF_DBGLEVEL >= MF_DBG_ALL) {\r
- Dbprintf("Pages read %d", count_Pages);\r
- }\r
\r
- len = 16*4; //64 bytes\r
- \r
- // Read a UL-C\r
- if (Pages == 44 && count_Pages > 16) \r
- len = 176;\r
+ if (MF_DBGLEVEL >= MF_DBG_EXTENDED) Dbprintf("Blocks read %d", countblocks);\r
+\r
+ countblocks *= 4;\r
\r
- cmd_send(CMD_ACK, 1, 0, 0, dataout, len); \r
+ cmd_send(CMD_ACK, 1, countblocks, BigBuf_max_traceLen(), 0, 0);\r
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
LEDsoff();\r
+ BigBuf_free();\r
}\r
\r
-\r
//-----------------------------------------------------------------------------\r
// Select, Authenticate, Write a MIFARE tag. \r
// read block\r
struct Crypto1State *pcs;\r
pcs = &mpcs;\r
\r
- // clear trace\r
- clear_trace();\r
-\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
+ clear_trace();\r
+\r
LED_A_ON();\r
LED_B_OFF();\r
LED_C_OFF();\r
LEDsoff();\r
}\r
\r
-void MifareUWriteBlock(uint8_t arg0, uint8_t *datain)\r
+/* // Command not needed but left for future testing \r
+void MifareUWriteBlockCompat(uint8_t arg0, uint8_t *datain)\r
{\r
- // params\r
- uint8_t blockNo = arg0;\r
+ uint8_t blockNo = arg0;\r
byte_t blockdata[16] = {0x00};\r
\r
- memcpy(blockdata, datain,16);\r
- \r
- // variables\r
- byte_t isOK = 0;\r
+ memcpy(blockdata, datain, 16);\r
+\r
uint8_t uid[10] = {0x00};\r
- uint32_t cuid;\r
\r
- clear_trace();\r
- iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
+ LED_A_ON(); LED_B_OFF(); LED_C_OFF();\r
\r
- LED_A_ON();\r
- LED_B_OFF();\r
- LED_C_OFF();\r
-\r
- while (true) {\r
- if(!iso14443a_select_card(uid, NULL, &cuid)) {\r
- if (MF_DBGLEVEL >= 1) Dbprintf("Can't select card");\r
- break;\r
- };\r
-\r
- if(mifare_ultra_writeblock(cuid, blockNo, blockdata)) {\r
- if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
- break;\r
- };\r
-\r
- if(mifare_ultra_halt(cuid)) {\r
- if (MF_DBGLEVEL >= 1) Dbprintf("Halt error");\r
- break;\r
- };\r
- \r
- isOK = 1;\r
- break;\r
- }\r
- \r
- if (MF_DBGLEVEL >= 2) DbpString("WRITE BLOCK FINISHED");\r
-\r
- cmd_send(CMD_ACK,isOK,0,0,0,0);\r
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
- LEDsoff();\r
-}\r
+ clear_trace();\r
+ iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
+\r
+ if(!iso14443a_select_card(uid, NULL, NULL)) {\r
+ if (MF_DBGLEVEL >= 1) Dbprintf("Can't select card");\r
+ OnError(0);\r
+ return;\r
+ };\r
+\r
+ if(mifare_ultra_writeblock_compat(blockNo, blockdata)) {\r
+ if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
+ OnError(0);\r
+ return; };\r
+\r
+ if(mifare_ultra_halt()) {\r
+ if (MF_DBGLEVEL >= 1) Dbprintf("Halt error");\r
+ OnError(0);\r
+ return;\r
+ };\r
\r
-void MifareUWriteBlock_Special(uint8_t arg0, uint8_t *datain)\r
+ if (MF_DBGLEVEL >= 2) DbpString("WRITE BLOCK FINISHED");\r
+\r
+ cmd_send(CMD_ACK,1,0,0,0,0);\r
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
+ LEDsoff();\r
+}\r
+*/\r
+\r
+// Arg0 : Block to write to.\r
+// Arg1 : 0 = use no authentication.\r
+// 1 = use 0x1A authentication.\r
+// 2 = use 0x1B authentication.\r
+// datain : 4 first bytes is data to be written.\r
+// : 4/16 next bytes is authentication key.\r
+void MifareUWriteBlock(uint8_t arg0, uint8_t arg1, uint8_t *datain)\r
{\r
- // params\r
uint8_t blockNo = arg0;\r
+ bool useKey = (arg1 == 1); //UL_C\r
+ bool usePwd = (arg1 == 2); //UL_EV1/NTAG\r
byte_t blockdata[4] = {0x00};\r
- \r
- memcpy(blockdata, datain,4);\r
\r
- // variables\r
- byte_t isOK = 0;\r
- uint8_t uid[10] = {0x00};\r
- uint32_t cuid;\r
+ memcpy(blockdata, datain,4);\r
+ \r
+ LEDsoff();\r
+ LED_A_ON();\r
+ iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
clear_trace();\r
+\r
+ if(!iso14443a_select_card(NULL, NULL, NULL)) {\r
+ if (MF_DBGLEVEL >= 1) Dbprintf("Can't select card");\r
+ OnError(0);\r
+ return;\r
+ };\r
+\r
+ // UL-C authentication\r
+ if ( useKey ) {\r
+ uint8_t key[16] = {0x00}; \r
+ memcpy(key, datain+4, sizeof(key) );\r
+\r
+ if ( !mifare_ultra_auth(key) ) {\r
+ OnError(1);\r
+ return; \r
+ }\r
+ }\r
+ \r
+ // UL-EV1 / NTAG authentication\r
+ if (usePwd) { \r
+ uint8_t pwd[4] = {0x00};\r
+ memcpy(pwd, datain+4, 4);\r
+ uint8_t pack[4] = {0,0,0,0};\r
+ if (!mifare_ul_ev1_auth(pwd, pack)) {\r
+ OnError(1);\r
+ return; \r
+ }\r
+ }\r
+ \r
+ if(mifare_ultra_writeblock(blockNo, blockdata)) {\r
+ if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
+ OnError(0);\r
+ return;\r
+ };\r
+\r
+ if(mifare_ultra_halt()) {\r
+ if (MF_DBGLEVEL >= 1) Dbprintf("Halt error");\r
+ OnError(0);\r
+ return;\r
+ };\r
+\r
+ if (MF_DBGLEVEL >= 2) DbpString("WRITE BLOCK FINISHED");\r
+\r
+ cmd_send(CMD_ACK,1,0,0,0,0);\r
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
+ LEDsoff();\r
+}\r
+\r
+void MifareUSetPwd(uint8_t arg0, uint8_t *datain){\r
+ \r
+ uint8_t pwd[16] = {0x00};\r
+ byte_t blockdata[4] = {0x00};\r
+ \r
+ memcpy(pwd, datain, 16);\r
+ \r
+ LED_A_ON(); LED_B_OFF(); LED_C_OFF();\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
- LED_A_ON();\r
- LED_B_OFF();\r
- LED_C_OFF();\r
+ clear_trace();\r
\r
- while (true) {\r
- if(!iso14443a_select_card(uid, NULL, &cuid)) {\r
- if (MF_DBGLEVEL >= 1) Dbprintf("Can't select card");\r
- break;\r
- };\r
+ if(!iso14443a_select_card(NULL, NULL, NULL)) {\r
+ if (MF_DBGLEVEL >= 1) Dbprintf("Can't select card");\r
+ OnError(0);\r
+ return;\r
+ };\r
\r
- if(mifare_ultra_special_writeblock(cuid, blockNo, blockdata)) {\r
- if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
- break;\r
- };\r
+ blockdata[0] = pwd[7];\r
+ blockdata[1] = pwd[6];\r
+ blockdata[2] = pwd[5];\r
+ blockdata[3] = pwd[4];\r
+ if(mifare_ultra_writeblock( 44, blockdata)) {\r
+ if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
+ OnError(44);\r
+ return;\r
+ };\r
\r
- if(mifare_ultra_halt(cuid)) {\r
- if (MF_DBGLEVEL >= 1) Dbprintf("Halt error");\r
- break;\r
- };\r
+ blockdata[0] = pwd[3];\r
+ blockdata[1] = pwd[2];\r
+ blockdata[2] = pwd[1];\r
+ blockdata[3] = pwd[0];\r
+ if(mifare_ultra_writeblock( 45, blockdata)) {\r
+ if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
+ OnError(45);\r
+ return;\r
+ };\r
\r
- isOK = 1;\r
- break;\r
- }\r
+ blockdata[0] = pwd[15];\r
+ blockdata[1] = pwd[14];\r
+ blockdata[2] = pwd[13];\r
+ blockdata[3] = pwd[12];\r
+ if(mifare_ultra_writeblock( 46, blockdata)) {\r
+ if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
+ OnError(46);\r
+ return;\r
+ };\r
\r
- if (MF_DBGLEVEL >= 2) DbpString("WRITE BLOCK FINISHED");\r
+ blockdata[0] = pwd[11];\r
+ blockdata[1] = pwd[10];\r
+ blockdata[2] = pwd[9];\r
+ blockdata[3] = pwd[8];\r
+ if(mifare_ultra_writeblock( 47, blockdata)) {\r
+ if (MF_DBGLEVEL >= 1) Dbprintf("Write block error");\r
+ OnError(47);\r
+ return;\r
+ }; \r
\r
- cmd_send(CMD_ACK,isOK,0,0,0,0);\r
+ if(mifare_ultra_halt()) {\r
+ if (MF_DBGLEVEL >= 1) Dbprintf("Halt error");\r
+ OnError(0);\r
+ return;\r
+ };\r
+\r
+ cmd_send(CMD_ACK,1,0,0,0,0);\r
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
LEDsoff();\r
}\r
uint32_t auth1_time, auth2_time;\r
static uint16_t delta_time;\r
\r
- // free eventually allocated BigBuf memory\r
- BigBuf_free();\r
- // clear trace\r
- clear_trace();\r
- set_tracing(false);\r
- \r
- iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
-\r
LED_A_ON();\r
LED_C_OFF();\r
+ iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
+\r
+ // free eventually allocated BigBuf memory\r
+ BigBuf_free();\r
\r
+ if (calibrate) clear_trace();\r
+ set_tracing(true);\r
\r
// statistics on nonce distance\r
+ int16_t isOK = 0;\r
+ #define NESTED_MAX_TRIES 12\r
+ uint16_t unsuccessfull_tries = 0;\r
if (calibrate) { // for first call only. Otherwise reuse previous calibration\r
LED_B_ON();\r
WDT_HIT();\r
\r
for (rtr = 0; rtr < 17; rtr++) {\r
\r
+ // Test if the action was cancelled\r
+ if(BUTTON_PRESS()) {\r
+ isOK = -2;\r
+ break;\r
+ }\r
+\r
// prepare next select. No need to power down the card.\r
if(mifare_classic_halt(pcs, cuid)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("Nested: Halt error");\r
delta_time = auth2_time - auth1_time + 32; // allow some slack for proper timing\r
}\r
if (MF_DBGLEVEL >= 3) Dbprintf("Nested: calibrating... ntdist=%d", i);\r
+ } else {\r
+ unsuccessfull_tries++;\r
+ if (unsuccessfull_tries > NESTED_MAX_TRIES) { // card isn't vulnerable to nested attack (random numbers are not predictable)\r
+ isOK = -3;\r
+ }\r
}\r
}\r
- \r
- if (rtr <= 1) return;\r
\r
davg = (davg + (rtr - 1)/2) / (rtr - 1);\r
\r
- if (MF_DBGLEVEL >= 3) Dbprintf("min=%d max=%d avg=%d, delta_time=%d", dmin, dmax, davg, delta_time);\r
+ if (MF_DBGLEVEL >= 3) Dbprintf("rtr=%d isOK=%d min=%d max=%d avg=%d, delta_time=%d", rtr, isOK, dmin, dmax, davg, delta_time);\r
\r
dmin = davg - 2;\r
dmax = davg + 2;\r
\r
LED_B_OFF();\r
- \r
}\r
// ------------------------------------------------------------------------------------------------- \r
\r
LED_C_ON();\r
\r
// get crypted nonces for target sector\r
- for(i=0; i < 2; i++) { // look for exactly two different nonces\r
+ for(i=0; i < 2 && !isOK; i++) { // look for exactly two different nonces\r
\r
target_nt[i] = 0;\r
while(target_nt[i] == 0) { // continue until we have an unambiguous nonce\r
\r
// nested authentication\r
auth2_time = auth1_time + delta_time;\r
- len = mifare_sendcmd_shortex(pcs, AUTH_NESTED, 0x60 + (targetKeyType & 0x01), targetBlockNo, receivedAnswer, par, &auth2_time);\r
+ len = mifare_sendcmd_short(pcs, AUTH_NESTED, 0x60 + (targetKeyType & 0x01), targetBlockNo, receivedAnswer, par, &auth2_time);\r
if (len != 4) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("Nested: Auth2 error len=%d", len);\r
continue;\r
memcpy(buf+16, &target_ks[1], 4);\r
\r
LED_B_ON();\r
- cmd_send(CMD_ACK, 0, 2, targetBlockNo + (targetKeyType * 0x100), buf, sizeof(buf));\r
+ cmd_send(CMD_ACK, isOK, 0, targetBlockNo + (targetKeyType * 0x100), buf, sizeof(buf));\r
LED_B_OFF();\r
\r
if (MF_DBGLEVEL >= 3) DbpString("NESTED FINISHED");\r
\r
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
LEDsoff();\r
- set_tracing(TRUE);\r
+ set_tracing(FALSE);\r
}\r
\r
//-----------------------------------------------------------------------------\r
// MIFARE check keys. key count up to 85. \r
// \r
//-----------------------------------------------------------------------------\r
-void MifareChkKeys(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)\r
+void MifareChkKeys(uint16_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)\r
{\r
// params\r
- uint8_t blockNo = arg0;\r
- uint8_t keyType = arg1;\r
+ uint8_t blockNo = arg0 & 0xff;\r
+ uint8_t keyType = (arg0 >> 8) & 0xff;\r
+ bool clearTrace = arg1;\r
uint8_t keyCount = arg2;\r
uint64_t ui64Key = 0;\r
\r
int OLD_MF_DBGLEVEL = MF_DBGLEVEL; \r
MF_DBGLEVEL = MF_DBG_NONE;\r
\r
- // clear trace\r
- clear_trace();\r
- set_tracing(TRUE);\r
-\r
- iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
-\r
LED_A_ON();\r
LED_B_OFF();\r
LED_C_OFF();\r
+ iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
+\r
+ if (clearTrace) clear_trace();\r
+ set_tracing(TRUE);\r
\r
for (i = 0; i < keyCount; i++) {\r
if(mifare_classic_halt(pcs, cuid)) {\r
\r
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
LEDsoff();\r
-\r
+ set_tracing(FALSE);\r
+ \r
// restore debug level\r
MF_DBGLEVEL = OLD_MF_DBGLEVEL; \r
}\r
//-----------------------------------------------------------------------------\r
// Work with emulator memory\r
// \r
+// Note: we call FpgaDownloadAndGo(FPGA_BITSTREAM_HF) here although FPGA is not\r
+// involved in dealing with emulator memory. But if it is called later, it might\r
+// destroy the Emulator Memory.\r
//-----------------------------------------------------------------------------\r
+\r
void MifareEMemClr(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){\r
+ FpgaDownloadAndGo(FPGA_BITSTREAM_HF);\r
emlClearMem();\r
}\r
\r
void MifareEMemSet(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){\r
- emlSetMem(datain, arg0, arg1); // data, block num, blocks count\r
+ FpgaDownloadAndGo(FPGA_BITSTREAM_HF);\r
+ //emlSetMem(datain, arg0, arg1); // data, block num, blocks count \r
+ emlSetMem_xt(datain, arg0, arg1, arg2); // data, block num, blocks count, block byte width\r
}\r
\r
void MifareEMemGet(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){\r
+ FpgaDownloadAndGo(FPGA_BITSTREAM_HF);\r
byte_t buf[USB_CMD_DATA_SIZE];\r
emlGetMem(buf, arg0, arg1); // data, block num, blocks count (max 4)\r
\r
byte_t dataoutbuf2[16];\r
uint8_t uid[10];\r
\r
- // clear trace\r
- clear_trace();\r
- set_tracing(false);\r
- \r
- iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
-\r
LED_A_ON();\r
LED_B_OFF();\r
LED_C_OFF();\r
+ iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
+ \r
+ clear_trace();\r
+ set_tracing(TRUE);\r
\r
bool isOK = true;\r
\r
\r
if (MF_DBGLEVEL >= 2) DbpString("EMUL FILL SECTORS FINISHED");\r
\r
+ set_tracing(FALSE);\r
}\r
\r
\r
LED_A_ON();\r
LED_B_OFF();\r
LED_C_OFF();\r
+ iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
clear_trace();\r
set_tracing(TRUE);\r
- iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
}\r
\r
while (true) {\r
if ((workFlags & 0x10) || (!isOK)) {\r
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
LEDsoff();\r
+ set_tracing(FALSE);\r
}\r
}\r
\r
// bit 2 - need HALT after sequence\r
// bit 3 - need init FPGA and field before sequence\r
// bit 4 - need reset FPGA and LED\r
+ // bit 5 - need to set datain instead of issuing USB reply (called via ARM for StandAloneMode14a)\r
uint8_t workFlags = arg0;\r
uint8_t blockNo = arg2;\r
\r
LED_A_ON();\r
LED_B_OFF();\r
LED_C_OFF();\r
+ iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
\r
clear_trace();\r
set_tracing(TRUE);\r
- iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
}\r
\r
while (true) {\r
}\r
\r
LED_B_ON();\r
+ if (workFlags & 0x20) {\r
+ if (isOK)\r
+ memcpy(datain, data, 18);\r
+ }\r
+ else\r
cmd_send(CMD_ACK,isOK,0,0,data,18);\r
LED_B_OFF();\r
\r
if ((workFlags & 0x10) || (!isOK)) {\r
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
LEDsoff();\r
+ set_tracing(FALSE);\r
}\r
}\r
\r
cmd_send(CMD_ACK,isOK,0,0,0,0);\r
}\r
\r
- //\r
+void MifareCollectNonces(uint32_t arg0, uint32_t arg1){\r
+\r
+ BigBuf_free();\r
+\r
+ uint32_t iterations = arg0;\r
+ uint8_t uid[10] = {0x00};\r
+\r
+ uint8_t *response = BigBuf_malloc(MAX_MIFARE_FRAME_SIZE);\r
+ uint8_t *responsePar = BigBuf_malloc(MAX_MIFARE_PARITY_SIZE);\r
+\r
+ uint8_t mf_auth[] = { 0x60,0x00,0xf5,0x7b };\r
+ \r
+ // get memory from BigBuf.\r
+ uint8_t *nonces = BigBuf_malloc(iterations * 4);\r
+\r
+ LED_A_ON();\r
+ LED_B_OFF();\r
+ LED_C_OFF();\r
+ \r
+ iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
+ clear_trace();\r
+ set_tracing(TRUE);\r
+ \r
+ for (int i = 0; i < iterations; i++) {\r
+ \r
+ WDT_HIT();\r
+\r
+ // Test if the action was cancelled\r
+ if(BUTTON_PRESS()) break;\r
+ \r
+ // if(mifare_classic_halt(pcs, cuid)) {\r
+ // if (MF_DBGLEVEL >= 1) Dbprintf("Halt error");\r
+ //}\r
+\r
+ if(!iso14443a_select_card(uid, NULL, NULL)) {\r
+ if (MF_DBGLEVEL >= 1) Dbprintf("Can't select card");\r
+ continue;\r
+ };\r
+\r
+ // Transmit MIFARE_CLASSIC_AUTH.\r
+ ReaderTransmit(mf_auth, sizeof(mf_auth), NULL);\r
+\r
+ // Receive the (4 Byte) "random" nonce\r
+ if (!ReaderReceive(response, responsePar)) {\r
+ if (MF_DBGLEVEL >= 1) Dbprintf("Couldn't receive tag nonce");\r
+ continue;\r
+ } \r
+ \r
+ nonces[i*4] = bytes_to_num(response, 4);\r
+ }\r
+ \r
+ int packLen = iterations * 4;\r
+ int packSize = 0;\r
+ int packNum = 0;\r
+ while (packLen > 0) {\r
+ packSize = MIN(USB_CMD_DATA_SIZE, packLen);\r
+ LED_B_ON();\r
+ cmd_send(CMD_ACK, 77, 0, packSize, nonces - packLen, packSize);\r
+ LED_B_OFF();\r
+\r
+ packLen -= packSize;\r
+ packNum++;\r
+ }\r
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
+ LEDsoff();\r
+ set_tracing(FALSE);\r
+}\r
+\r
+//\r
// DESFIRE\r
//\r
\r
\r
byte_t dataout[11] = {0x00};\r
uint8_t uid[10] = {0x00};\r
- uint32_t cuid;\r
+ uint32_t cuid = 0x00;\r
\r
- clear_trace();\r
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);\r
+ clear_trace();\r
\r
int len = iso14443a_select_card(uid, NULL, &cuid);\r
if(!len) {\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR) \r
- Dbprintf("Can't select card");\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card");\r
OnError(1);\r
return;\r
};\r
\r
if(mifare_desfire_des_auth1(cuid, dataout)){\r
- if (MF_DBGLEVEL >= MF_DBG_ERROR) \r
- Dbprintf("Authentication part1: Fail.");\r
+ if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Authentication part1: Fail.");\r
OnError(4);\r
return;\r
}\r
\r
if (MF_DBGLEVEL >= MF_DBG_EXTENDED) DbpString("AUTH 1 FINISHED");\r
- \r
cmd_send(CMD_ACK,1,cuid,0,dataout, sizeof(dataout));\r
}\r
\r
\r
uint32_t cuid = arg0;\r
uint8_t key[16] = {0x00};\r
- byte_t isOK = 0;\r
byte_t dataout[12] = {0x00};\r
+ byte_t isOK = 0;\r
\r
memcpy(key, datain, 16);\r
\r
isOK = mifare_desfire_des_auth2(cuid, key, dataout);\r
\r
if( isOK) {\r
- if (MF_DBGLEVEL >= MF_DBG_EXTENDED) \r
- Dbprintf("Authentication part2: Failed"); \r
+ if (MF_DBGLEVEL >= MF_DBG_EXTENDED) Dbprintf("Authentication part2: Failed"); \r
OnError(4);\r
return;\r
}\r
\r
- if (MF_DBGLEVEL >= MF_DBG_EXTENDED) \r
- DbpString("AUTH 2 FINISHED");\r
+ if (MF_DBGLEVEL >= MF_DBG_EXTENDED) DbpString("AUTH 2 FINISHED");\r
\r
cmd_send(CMD_ACK, isOK, 0, 0, dataout, sizeof(dataout));\r
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
LEDsoff();\r
-}\r
+}
\ No newline at end of file
projects / proxmark3-svn / blobdiff