//-----------------------------------------------------------------------------
// High frequency MIFARE ULTRALIGHT (C) commands
//-----------------------------------------------------------------------------
-#include "loclass/des.h"
+
#include "cmdhfmfu.h"
+
+#include <stdint.h>
+#include <stdio.h>
+#include "proxmark3.h"
+#include "usb_cmd.h"
+#include "cmdmain.h"
+#include "ui.h"
+#include "loclass/des.h"
#include "cmdhfmf.h"
#include "cmdhf14a.h"
#include "mifare.h"
{0x32,0x0C,0x16,0x17}, // PACK 0x80,0x80 -- AMiiboo (sniffed)
};
-#define MAX_UL_TYPES 17
-uint16_t UL_TYPES_ARRAY[MAX_UL_TYPES] = {UNKNOWN, UL, UL_C, UL_EV1_48, UL_EV1_128, NTAG, NTAG_203,
- NTAG_210, NTAG_212, NTAG_213, NTAG_215, NTAG_216, MY_D, MY_D_NFC, MY_D_MOVE, MY_D_MOVE_NFC, MY_D_MOVE_LEAN};
+#define MAX_UL_TYPES 18
+uint32_t UL_TYPES_ARRAY[MAX_UL_TYPES] = {UNKNOWN, UL, UL_C, UL_EV1_48, UL_EV1_128, NTAG, NTAG_203,
+ NTAG_210, NTAG_212, NTAG_213, NTAG_215, NTAG_216, MY_D, MY_D_NFC, MY_D_MOVE, MY_D_MOVE_NFC, MY_D_MOVE_LEAN, FUDAN_UL};
uint8_t UL_MEMORY_ARRAY[MAX_UL_TYPES] = {MAX_UL_BLOCKS, MAX_UL_BLOCKS, MAX_ULC_BLOCKS, MAX_ULEV1a_BLOCKS,
MAX_ULEV1b_BLOCKS, MAX_NTAG_203, MAX_NTAG_203, MAX_NTAG_210, MAX_NTAG_212, MAX_NTAG_213,
- MAX_NTAG_215, MAX_NTAG_216, MAX_UL_BLOCKS, MAX_MY_D_NFC, MAX_MY_D_MOVE, MAX_MY_D_MOVE, MAX_MY_D_MOVE_LEAN};
+ MAX_NTAG_215, MAX_NTAG_216, MAX_UL_BLOCKS, MAX_MY_D_NFC, MAX_MY_D_MOVE, MAX_MY_D_MOVE, MAX_MY_D_MOVE_LEAN, MAX_UL_BLOCKS};
static int CmdHelp(const char *Cmd);
return len;
}
+
+// Fudan check checks for which error is given for a command with incorrect crc
+// NXP UL chip responds with 01, fudan 00.
+// other possible checks:
+// send a0 + crc
+// UL responds with 00, fudan doesn't respond
+// or
+// send a200 + crc
+// UL doesn't respond, fudan responds with 00
+// or
+// send 300000 + crc (read with extra byte(s))
+// UL responds with read of page 0, fudan doesn't respond.
+//
+// make sure field is off before calling this function
+static int ul_fudan_check( void ){
+ iso14a_card_select_t card;
+ if ( !ul_select(&card) )
+ return UL_ERROR;
+
+ UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_RAW | ISO14A_NO_DISCONNECT, 4, 0}};
+
+ uint8_t cmd[4] = {0x30,0x00,0x02,0xa7}; //wrong crc on purpose should be 0xa8
+ memcpy(c.d.asBytes, cmd, 4);
+ clearCommandBuffer();
+ SendCommand(&c);
+ UsbCommand resp;
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return UL_ERROR;
+ if (resp.arg[0] != 1) return UL_ERROR;
+
+ return (!resp.d.asBytes[0]) ? FUDAN_UL : UL; //if response == 0x00 then Fudan, else Genuine NXP
+}
+
static int ul_print_default( uint8_t *data){
uint8_t uid[7];
PrintAndLog("%sTYPE : INFINEON my-d\x99 move NFC (SLE 66R01P)", spacer);
else if ( tagtype & MY_D_MOVE_LEAN )
PrintAndLog("%sTYPE : INFINEON my-d\x99 move lean (SLE 66R01L)", spacer);
+ else if ( tagtype & FUDAN_UL )
+ PrintAndLog("%sTYPE : FUDAN Ultralight Compatible (or other compatible) %s", spacer, (tagtype & MAGIC) ? "<magic>" : "" );
else
PrintAndLog("%sTYPE : Unknown %06x", spacer, tagtype);
return 0;
ul_switch_off_field();
}
}
+ if (tagtype & UL) {
+ tagtype = ul_fudan_check();
+ ul_switch_off_field();
+ }
} else {
ul_switch_off_field();
// Infinition MY-D tests Exam high nibble
uint8_t authenticationkey[16] = {0x00};
uint8_t *authKeyPtr = authenticationkey;
- // starting with getting tagtype
- TagTypeUL_t tagtype = GetHF14AMfU_Type();
- if (tagtype == UL_ERROR) return -1;
-
while(param_getchar(Cmd, cmdp) != 0x00)
{
switch(param_getchar(Cmd, cmdp))
case 'b':
case 'B':
blockNo = param_get8(Cmd, cmdp+1);
-
- uint8_t maxblockno = 0;
- for (uint8_t idx = 0; idx < MAX_UL_TYPES; idx++){
- if (tagtype & UL_TYPES_ARRAY[idx])
- maxblockno = UL_MEMORY_ARRAY[idx];
- }
-
if (blockNo < 0) {
PrintAndLog("Wrong block number");
errors = true;
}
- if (blockNo > maxblockno){
- PrintAndLog("block number too large. Max block is %u/0x%02X \n", maxblockno,maxblockno);
- errors = true;
- }
cmdp += 2;
break;
case 'l':
}
if ( blockNo == -1 ) return usage_hf_mfu_wrbl();
+ // starting with getting tagtype
+ TagTypeUL_t tagtype = GetHF14AMfU_Type();
+ if (tagtype == UL_ERROR) return -1;
+
+ uint8_t maxblockno = 0;
+ for (uint8_t idx = 0; idx < MAX_UL_TYPES; idx++){
+ if (tagtype & UL_TYPES_ARRAY[idx])
+ maxblockno = UL_MEMORY_ARRAY[idx];
+ }
+ if (blockNo > maxblockno){
+ PrintAndLog("block number too large. Max block is %u/0x%02X \n", maxblockno,maxblockno);
+ return usage_hf_mfu_wrbl();
+ }
// Swap endianness
if (swapEndian && hasAuthKey) authKeyPtr = SwapEndian64(authenticationkey, 16, 8);
uint8_t authenticationkey[16] = {0x00};
uint8_t *authKeyPtr = authenticationkey;
- // starting with getting tagtype
- TagTypeUL_t tagtype = GetHF14AMfU_Type();
- if (tagtype == UL_ERROR) return -1;
-
while(param_getchar(Cmd, cmdp) != 0x00)
{
switch(param_getchar(Cmd, cmdp))
case 'b':
case 'B':
blockNo = param_get8(Cmd, cmdp+1);
-
- uint8_t maxblockno = 0;
- for (uint8_t idx = 0; idx < MAX_UL_TYPES; idx++){
- if (tagtype & UL_TYPES_ARRAY[idx])
- maxblockno = UL_MEMORY_ARRAY[idx];
- }
-
if (blockNo < 0) {
PrintAndLog("Wrong block number");
errors = true;
}
- if (blockNo > maxblockno){
- PrintAndLog("block number to large. Max block is %u/0x%02X \n", maxblockno,maxblockno);
- errors = true;
- }
cmdp += 2;
break;
case 'l':
}
if ( blockNo == -1 ) return usage_hf_mfu_rdbl();
+ // start with getting tagtype
+ TagTypeUL_t tagtype = GetHF14AMfU_Type();
+ if (tagtype == UL_ERROR) return -1;
+
+ uint8_t maxblockno = 0;
+ for (uint8_t idx = 0; idx < MAX_UL_TYPES; idx++){
+ if (tagtype & UL_TYPES_ARRAY[idx])
+ maxblockno = UL_MEMORY_ARRAY[idx];
+ }
+ if (blockNo > maxblockno){
+ PrintAndLog("block number to large. Max block is %u/0x%02X \n", maxblockno,maxblockno);
+ return usage_hf_mfu_rdbl();
+ }
// Swap endianness
if (swapEndian && hasAuthKey) authKeyPtr = SwapEndian64(authenticationkey, 16, 8);
bool manualPages = false;
uint8_t startPage = 0;
char tempStr[50];
+ unsigned char cleanASCII[4];
while(param_getchar(Cmd, cmdp) != 0x00)
{
PrintAndLog("---------------------------------");
for (i = 0; i < Pages; ++i) {
if ( i < 3 ) {
- PrintAndLog("%02d/0x%02X | %s| | ", i+startPage, i+startPage, sprint_hex(data + i * 4, 4));
+ PrintAndLog("%3d/0x%02X | %s| | ", i+startPage, i+startPage, sprint_hex(data + i * 4, 4));
continue;
}
switch(i){
case 43: tmplockbit = bit2[9]; break; //auth1
default: break;
}
- PrintAndLog("%02d/0x%02X | %s| %d | %.4s", i+startPage, i+startPage, sprint_hex(data + i * 4, 4), tmplockbit, data+i*4);
+
+ // convert unprintable characters and line breaks to dots
+ memcpy(cleanASCII, data+i*4, 4);
+ clean_ascii(cleanASCII, 4);
+
+ PrintAndLog("%3d/0x%02X | %s| %d | %.4s", i+startPage, i+startPage, sprint_hex(data + i * 4, 4), tmplockbit, cleanASCII);
}
PrintAndLog("---------------------------------");
projects / proxmark3-svn / blobdiff