#include "ui.h"
#include "cmdparser.h"
#include "cmdhficlass.h"
-#include "../include/common.h"
+#include "common.h"
#include "util.h"
#include "cmdmain.h"
#include "loclass/des.h"
#include "loclass/ikeys.h"
#include "loclass/elite_crack.h"
#include "loclass/fileutils.h"
+#include "protocols.h"
+#include "usb_cmd.h"
+#include "cmdhfmfu.h"
+#include "cmdhf.h"
static int CmdHelp(const char *Cmd);
-int xorbits_8(uint8_t val)
-{
+#define ICLASS_KEYS_MAX 8
+static uint8_t iClass_Key_Table[ICLASS_KEYS_MAX][8] = {
+ { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 },
+ { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 },
+ { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 },
+ { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 },
+ { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 },
+ { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 },
+ { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 },
+ { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 }
+};
+
+typedef struct iclass_block {
+ uint8_t d[8];
+} iclass_block_t;
+
+int xorbits_8(uint8_t val) {
uint8_t res = val ^ (val >> 1); //1st pass
res = res ^ (res >> 1); // 2nd pass
res = res ^ (res >> 2); // 3rd pass
return res & 1;
}
-#define ICLASS_CMD_ACTALL 0x0A
-#define ICLASS_CMD_IDENTIFY 0x0C
-#define ICLASS_CMD_READ 0x0C
-
-#define ICLASS_CMD_SELECT 0x81
-#define ICLASS_CMD_PAGESEL 0x84
-#define ICLASS_CMD_READCHECK 0x88
-#define ICLASS_CMD_CHECK 0x05
-#define ICLASS_CMD_SOF 0x0F
-#define ICLASS_CMD_HALT 0x00
-
-
-void explain(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize)
-{
-
- if(cmdsize > 1 && cmd[0] == ICLASS_CMD_READ)
- {
- snprintf(exp,size,"READ(%d)",cmd[1]);
- return;
- }
-
- switch(cmd[0])
- {
- case ICLASS_CMD_ACTALL: snprintf(exp,size,"ACTALL"); break;
- case ICLASS_CMD_IDENTIFY: snprintf(exp,size,"IDENTIFY"); break;
- case ICLASS_CMD_SELECT: snprintf(exp,size,"SELECT"); break;
- case ICLASS_CMD_PAGESEL: snprintf(exp,size,"PAGESEL"); break;
- case ICLASS_CMD_READCHECK: snprintf(exp,size,"READCHECK"); break;
- case ICLASS_CMD_CHECK: snprintf(exp,size,"CHECK"); break;
- case ICLASS_CMD_SOF: snprintf(exp,size,"SOF"); break;
- case ICLASS_CMD_HALT: snprintf(exp,size,"HALT"); break;
- default: snprintf(exp,size,"?"); break;
- }
- return;
-}
-
-int CmdHFiClassList(const char *Cmd)
-{
- PrintAndLog("Deprecated command, use 'hf list iclass' instead");
- return 0;
+int CmdHFiClassList(const char *Cmd) {
+ //PrintAndLog("Deprecated command, use 'hf list iclass' instead");
+ CmdHFList("iclass");
+ return 0;
}
-int CmdHFiClassSnoop(const char *Cmd)
-{
- UsbCommand c = {CMD_SNOOP_ICLASS};
- SendCommand(&c);
- return 0;
+int CmdHFiClassSnoop(const char *Cmd) {
+ UsbCommand c = {CMD_SNOOP_ICLASS};
+ SendCommand(&c);
+ return 0;
}
-#define NUM_CSNS 15
-int CmdHFiClassSim(const char *Cmd)
-{
- uint8_t simType = 0;
- uint8_t CSN[8] = {0, 0, 0, 0, 0, 0, 0, 0};
- if (strlen(Cmd)<1) {
- PrintAndLog("Usage: hf iclass sim [0 <CSN>] | x");
+int usage_hf_iclass_sim(void) {
+ PrintAndLog("Usage: hf iclass sim <option> [CSN]");
PrintAndLog(" options");
PrintAndLog(" 0 <CSN> simulate the given CSN");
PrintAndLog(" 1 simulate default CSN");
- PrintAndLog(" 2 iterate CSNs, gather MACs");
- PrintAndLog(" sample: hf iclass sim 0 031FEC8AF7FF12E0");
- PrintAndLog(" sample: hf iclass sim 2");
+ PrintAndLog(" 2 Reader-attack, gather reader responses to extract elite key");
+ PrintAndLog(" 3 Full simulation using emulator memory (see 'hf iclass eload')");
+ PrintAndLog(" example: hf iclass sim 0 031FEC8AF7FF12E0");
+ PrintAndLog(" example: hf iclass sim 2");
+ PrintAndLog(" example: hf iclass eload 'tagdump.bin'");
+ PrintAndLog(" hf iclass sim 3");
return 0;
- }
-
- simType = param_get8(Cmd, 0);
-
- if(simType == 0)
- {
- if (param_gethex(Cmd, 1, CSN, 16)) {
- PrintAndLog("A CSN should consist of 16 HEX symbols");
- return 1;
- }
- PrintAndLog("--simtype:%02x csn:%s", simType, sprint_hex(CSN, 8));
-
- }
- if(simType > 2)
- {
- PrintAndLog("Undefined simptype %d", simType);
- return 1;
- }
- uint8_t numberOfCSNs=0;
+}
+#define NUM_CSNS 15
+int CmdHFiClassSim(const char *Cmd) {
+ uint8_t simType = 0;
+ uint8_t CSN[8] = {0, 0, 0, 0, 0, 0, 0, 0};
+
+ if (strlen(Cmd)<1) return usage_hf_iclass_sim();
+
+ simType = param_get8ex(Cmd, 0, 0, 10);
+
+ if(simType == 0)
+ {
+ if (param_gethex(Cmd, 1, CSN, 16)) {
+ PrintAndLog("A CSN should consist of 16 HEX symbols");
+ return usage_hf_iclass_sim();
+ }
+
+ PrintAndLog("--simtype:%02x csn:%s", simType, sprint_hex(CSN, 8));
+ }
+
+ if(simType > 3)
+ {
+ PrintAndLog("Undefined simptype %d", simType);
+ return usage_hf_iclass_sim();
+ }
+
+ uint8_t numberOfCSNs=0;
if(simType == 2)
{
UsbCommand c = {CMD_SIMULATE_TAG_ICLASS, {simType,NUM_CSNS}};
UsbCommand resp = {0};
- /*uint8_t csns[8 * NUM_CSNS] = {
- 0x00,0x0B,0x0F,0xFF,0xF7,0xFF,0x12,0xE0 ,
- 0x00,0x13,0x94,0x7e,0x76,0xff,0x12,0xe0 ,
- 0x2a,0x99,0xac,0x79,0xec,0xff,0x12,0xe0 ,
- 0x17,0x12,0x01,0xfd,0xf7,0xff,0x12,0xe0 ,
- 0xcd,0x56,0x01,0x7c,0x6f,0xff,0x12,0xe0 ,
- 0x4b,0x5e,0x0b,0x72,0xef,0xff,0x12,0xe0 ,
- 0x00,0x73,0xd8,0x75,0x58,0xff,0x12,0xe0 ,
- 0x0c,0x90,0x32,0xf3,0x5d,0xff,0x12,0xe0 };
-*/
-
- uint8_t csns[8*NUM_CSNS] = {
- 0x00, 0x0B, 0x0F, 0xFF, 0xF7, 0xFF, 0x12, 0xE0,
- 0x00, 0x04, 0x0E, 0x08, 0xF7, 0xFF, 0x12, 0xE0,
- 0x00, 0x09, 0x0D, 0x05, 0xF7, 0xFF, 0x12, 0xE0,
- 0x00, 0x0A, 0x0C, 0x06, 0xF7, 0xFF, 0x12, 0xE0,
- 0x00, 0x0F, 0x0B, 0x03, 0xF7, 0xFF, 0x12, 0xE0,
- 0x00, 0x08, 0x0A, 0x0C, 0xF7, 0xFF, 0x12, 0xE0,
- 0x00, 0x0D, 0x09, 0x09, 0xF7, 0xFF, 0x12, 0xE0,
- 0x00, 0x0E, 0x08, 0x0A, 0xF7, 0xFF, 0x12, 0xE0,
- 0x00, 0x03, 0x07, 0x17, 0xF7, 0xFF, 0x12, 0xE0,
- 0x00, 0x3C, 0x06, 0xE0, 0xF7, 0xFF, 0x12, 0xE0,
- 0x00, 0x01, 0x05, 0x1D, 0xF7, 0xFF, 0x12, 0xE0,
- 0x00, 0x02, 0x04, 0x1E, 0xF7, 0xFF, 0x12, 0xE0,
- 0x00, 0x07, 0x03, 0x1B, 0xF7, 0xFF, 0x12, 0xE0,
- 0x00, 0x00, 0x02, 0x24, 0xF7, 0xFF, 0x12, 0xE0,
- 0x00, 0x05, 0x01, 0x21, 0xF7, 0xFF, 0x12, 0xE0 };
-
- memcpy(c.d.asBytes, csns, 8*NUM_CSNS);
-
+ uint8_t csns[8*NUM_CSNS] = {
+ 0x00, 0x0B, 0x0F, 0xFF, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x04, 0x0E, 0x08, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x09, 0x0D, 0x05, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x0A, 0x0C, 0x06, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x0F, 0x0B, 0x03, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x08, 0x0A, 0x0C, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x0D, 0x09, 0x09, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x0E, 0x08, 0x0A, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x03, 0x07, 0x17, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x3C, 0x06, 0xE0, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x01, 0x05, 0x1D, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x02, 0x04, 0x1E, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x07, 0x03, 0x1B, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x00, 0x02, 0x24, 0xF7, 0xFF, 0x12, 0xE0,
+ 0x00, 0x05, 0x01, 0x21, 0xF7, 0xFF, 0x12, 0xE0 };
+
+ memcpy(c.d.asBytes, csns, 8*NUM_CSNS);
+ clearCommandBuffer();
SendCommand(&c);
if (!WaitForResponseTimeout(CMD_ACK, &resp, -1)) {
PrintAndLog("Command timed out");
}
uint8_t num_mac_responses = resp.arg[1];
- PrintAndLog("Mac responses: %d MACs obtained (should be %d)", num_mac_responses, NUM_CSNS);
+ PrintAndLog("Mac responses: %d MACs obtained (should be %d)", num_mac_responses,NUM_CSNS);
size_t datalen = NUM_CSNS*24;
/*
void* dump = malloc(datalen);
memset(dump,0,datalen);//<-- Need zeroes for the CC-field
uint8_t i = 0;
- for(i = 0 ; i < NUM_CSNS ; i++)
- {
- memcpy(dump+i*24, csns+i*8,8); //CSN
+ for(i = 0 ; i < NUM_CSNS ; i++) {
+ memcpy(dump+i*24, csns+i*8, 8); //CSN
//8 zero bytes here...
//Then comes NR_MAC (eight bytes from the response)
- memcpy(dump+i*24+16,resp.d.asBytes+i*8,8);
-
+ memcpy(dump+i*24+16, resp.d.asBytes+i*8, 8);
}
/** Now, save to dumpfile **/
- saveFile("iclass_mac_attack", "bin", dump,datalen);
+ saveFile("iclass_mac_attack", "bin", dump, datalen);
free(dump);
- }else
- {
+ } else {
UsbCommand c = {CMD_SIMULATE_TAG_ICLASS, {simType,numberOfCSNs}};
memcpy(c.d.asBytes, CSN, 8);
+ clearCommandBuffer();
+ SendCommand(&c);
+ }
+ return 0;
+}
+
+int HFiClassReader(const char *Cmd, bool loop, bool verbose) {
+ bool tagFound = false;
+ UsbCommand c = {CMD_READER_ICLASS, {FLAG_ICLASS_READER_CSN |
+ FLAG_ICLASS_READER_CONF | FLAG_ICLASS_READER_AA}};
+ // loop in client not device - else on windows have a communication error
+ c.arg[0] |= FLAG_ICLASS_READER_ONLY_ONCE | FLAG_ICLASS_READER_ONE_TRY;
+ UsbCommand resp;
+ while(!ukbhit()){
+ clearCommandBuffer();
SendCommand(&c);
+ if (WaitForResponseTimeout(CMD_ACK,&resp, 4500)) {
+ uint8_t readStatus = resp.arg[0] & 0xff;
+ uint8_t *data = resp.d.asBytes;
+
+ if (verbose) PrintAndLog("Readstatus:%02x", readStatus);
+ if( readStatus == 0){
+ //Aborted
+ if (verbose) PrintAndLog("Quitting...");
+ return 0;
+ }
+ if( readStatus & FLAG_ICLASS_READER_CSN){
+ PrintAndLog("CSN: %s",sprint_hex(data,8));
+ tagFound = true;
+ }
+ if( readStatus & FLAG_ICLASS_READER_CC) PrintAndLog("CC: %s", sprint_hex(data+16, 8));
+ if( readStatus & FLAG_ICLASS_READER_CONF) printIclassDumpInfo(data);
+ if (tagFound && !loop) return 1;
+ } else {
+ if (verbose) PrintAndLog("Command execute timeout");
+ }
+ if (!loop) break;
+ }
+ return 0;
+}
+
+int CmdHFiClassReader(const char *Cmd) {
+ return HFiClassReader(Cmd, true, true);
+}
+
+int CmdHFiClassReader_Replay(const char *Cmd) {
+ uint8_t readerType = 0;
+ uint8_t MAC[4]={0x00, 0x00, 0x00, 0x00};
+
+ if (strlen(Cmd)<1) {
+ PrintAndLog("Usage: hf iclass replay <MAC>");
+ PrintAndLog(" sample: hf iclass replay 00112233");
+ return 0;
+ }
+
+ if (param_gethex(Cmd, 0, MAC, 8)) {
+ PrintAndLog("MAC must include 8 HEX symbols");
+ return 1;
+ }
+
+ UsbCommand c = {CMD_READER_ICLASS_REPLAY, {readerType}};
+ memcpy(c.d.asBytes, MAC, 4);
+ clearCommandBuffer();
+ SendCommand(&c);
+ return 0;
+}
+
+int iclassEmlSetMem(uint8_t *data, int blockNum, int blocksCount) {
+ UsbCommand c = {CMD_MIFARE_EML_MEMSET, {blockNum, blocksCount, 0}};
+ memcpy(c.d.asBytes, data, blocksCount * 16);
+ clearCommandBuffer();
+ SendCommand(&c);
+ return 0;
+}
+
+int hf_iclass_eload_usage(void) {
+ PrintAndLog("Loads iclass tag-dump into emulator memory on device");
+ PrintAndLog("Usage: hf iclass eload f <filename>");
+ PrintAndLog("");
+ PrintAndLog("Example: hf iclass eload f iclass_tagdump-aa162d30f8ff12f1.bin");
+ return 0;
+}
+
+int CmdHFiClassELoad(const char *Cmd) {
+
+ char opt = param_getchar(Cmd, 0);
+ if (strlen(Cmd)<1 || opt == 'h' || opt == 'H') return hf_iclass_eload_usage();
+
+ //File handling and reading
+ FILE *f;
+ char filename[FILE_PATH_SIZE];
+ if(opt == 'f' && param_getstr(Cmd, 1, filename) > 0) {
+ f = fopen(filename, "rb");
+ } else {
+ return hf_iclass_eload_usage();
+ }
+
+ if(!f) {
+ PrintAndLog("Failed to read from file '%s'", filename);
+ return 1;
+ }
+
+ fseek(f, 0, SEEK_END);
+ long fsize = ftell(f);
+ fseek(f, 0, SEEK_SET);
+
+ if (fsize < 0) {
+ prnlog("Error, when getting filesize");
+ fclose(f);
+ return 1;
+ }
+
+ uint8_t *dump = malloc(fsize);
+
+ size_t bytes_read = fread(dump, 1, fsize, f);
+ fclose(f);
+
+ printIclassDumpInfo(dump);
+ //Validate
+
+ if (bytes_read < fsize) {
+ prnlog("Error, could only read %d bytes (should be %d)",bytes_read, fsize );
+ free(dump);
+ return 1;
+ }
+ //Send to device
+ uint32_t bytes_sent = 0;
+ uint32_t bytes_remaining = bytes_read;
+
+ while(bytes_remaining > 0){
+ uint32_t bytes_in_packet = MIN(USB_CMD_DATA_SIZE, bytes_remaining);
+ UsbCommand c = {CMD_ICLASS_EML_MEMSET, {bytes_sent,bytes_in_packet,0}};
+ memcpy(c.d.asBytes, dump, bytes_in_packet);
+ clearCommandBuffer();
+ SendCommand(&c);
+ bytes_remaining -= bytes_in_packet;
+ bytes_sent += bytes_in_packet;
+ }
+ free(dump);
+ PrintAndLog("Sent %d bytes of data to device emulator memory", bytes_sent);
+ return 0;
+}
+
+static int readKeyfile(const char *filename, size_t len, uint8_t* buffer) {
+ FILE *f = fopen(filename, "rb");
+ if(!f) {
+ PrintAndLog("Failed to read from file '%s'", filename);
+ return 1;
+ }
+ fseek(f, 0, SEEK_END);
+ long fsize = ftell(f);
+ fseek(f, 0, SEEK_SET);
+ size_t bytes_read = fread(buffer, 1, len, f);
+ fclose(f);
+
+ if(fsize != len) {
+ PrintAndLog("Warning, file size is %d, expected %d", fsize, len);
+ return 1;
+ }
+
+ if(bytes_read != len) {
+ PrintAndLog("Warning, could only read %d bytes, expected %d" ,bytes_read, len);
+ return 1;
+ }
+ return 0;
+}
+
+int usage_hf_iclass_decrypt(void) {
+ PrintAndLog("Usage: hf iclass decrypt f <tagdump>");
+ PrintAndLog("");
+ PrintAndLog("OBS! In order to use this function, the file 'iclass_decryptionkey.bin' must reside");
+ PrintAndLog("in the working directory. The file should be 16 bytes binary data");
+ PrintAndLog("");
+ PrintAndLog("example: hf iclass decrypt f tagdump_12312342343.bin");
+ PrintAndLog("");
+ PrintAndLog("OBS! This is pretty stupid implementation, it tries to decrypt every block after block 6. ");
+ PrintAndLog("Correct behaviour would be to decrypt only the application areas where the key is valid,");
+ PrintAndLog("which is defined by the configuration block.");
+ return 1;
+}
+
+int CmdHFiClassDecrypt(const char *Cmd) {
+ uint8_t key[16] = { 0 };
+ if(readKeyfile("iclass_decryptionkey.bin", 16, key)) {
+ usage_hf_iclass_decrypt();
+ return 1;
+ }
+ PrintAndLog("Decryption file found... ");
+ char opt = param_getchar(Cmd, 0);
+ if (strlen(Cmd)<1 || opt == 'h' || opt == 'H') return usage_hf_iclass_decrypt();
+
+ //Open the tagdump-file
+ FILE *f;
+ char filename[FILE_PATH_SIZE];
+ if(opt == 'f' && param_getstr(Cmd, 1, filename) > 0) {
+ if ( (f = fopen(filename, "rb")) == NULL) {
+ PrintAndLog("Could not find file %s", filename);
+ return 1;
+ }
+ } else {
+ return usage_hf_iclass_decrypt();
+ }
+
+ fseek(f, 0, SEEK_END);
+ long fsize = ftell(f);
+ fseek(f, 0, SEEK_SET);
+ uint8_t enc_dump[8] = {0};
+ uint8_t *decrypted = malloc(fsize);
+ des3_context ctx = { DES_DECRYPT ,{ 0 } };
+ des3_set2key_dec( &ctx, key);
+ size_t bytes_read = fread(enc_dump, 1, 8, f);
+
+ //Use the first block (CSN) for filename
+ char outfilename[FILE_PATH_SIZE] = { 0 };
+ snprintf(outfilename,FILE_PATH_SIZE,"iclass_tagdump-%02x%02x%02x%02x%02x%02x%02x%02x-decrypted",
+ enc_dump[0],enc_dump[1],enc_dump[2],enc_dump[3],
+ enc_dump[4],enc_dump[5],enc_dump[6],enc_dump[7]);
+
+ size_t blocknum =0;
+ while(bytes_read == 8)
+ {
+ if(blocknum < 7) {
+ memcpy(decrypted+(blocknum*8), enc_dump, 8);
+ } else {
+ des3_crypt_ecb(&ctx, enc_dump,decrypted +(blocknum*8) );
+ }
+ printvar("decrypted block", decrypted +(blocknum*8), 8);
+ bytes_read = fread(enc_dump, 1, 8, f);
+ blocknum++;
+ }
+ fclose(f);
+ saveFile(outfilename,"bin", decrypted, blocknum*8);
+ free(decrypted);
+ return 0;
+}
+
+int usage_hf_iclass_encrypt(void) {
+ PrintAndLog("Usage: hf iclass encrypt <BlockData>");
+ PrintAndLog("");
+ PrintAndLog("OBS! In order to use this function, the file 'iclass_decryptionkey.bin' must reside");
+ PrintAndLog("in the working directory. The file should be 16 bytes binary data");
+ PrintAndLog("");
+ PrintAndLog("example: hf iclass encrypt 0102030405060708");
+ PrintAndLog("");
+ return 0;
+}
+
+static int iClassEncryptBlkData(uint8_t *blkData) {
+ uint8_t key[16] = { 0 };
+ if(readKeyfile("iclass_decryptionkey.bin", 16, key)) {
+ usage_hf_iclass_encrypt();
+ return 1;
+ }
+ PrintAndLog("Decryption file found... ");
+
+ uint8_t encryptedData[16];
+ uint8_t *encrypted = encryptedData;
+ des3_context ctx = { DES_DECRYPT ,{ 0 } };
+ des3_set2key_enc( &ctx, key);
+
+ des3_crypt_ecb(&ctx, blkData,encrypted);
+ //printvar("decrypted block", decrypted, 8);
+ memcpy(blkData,encrypted,8);
+
+ return 1;
+}
+
+int CmdHFiClassEncryptBlk(const char *Cmd) {
+ uint8_t blkData[8] = {0};
+ char opt = param_getchar(Cmd, 0);
+ if (strlen(Cmd)<1 || opt == 'h' || opt == 'H') return usage_hf_iclass_encrypt();
+
+ //get the bytes to encrypt
+ if (param_gethex(Cmd, 0, blkData, 16)) {
+ PrintAndLog("BlockData must include 16 HEX symbols");
+ return 0;
+ }
+ if (!iClassEncryptBlkData(blkData)) return 0;
+
+ printvar("encrypted block", blkData, 8);
+ return 1;
+}
+
+void Calc_wb_mac(uint8_t blockno, uint8_t *data, uint8_t *div_key, uint8_t MAC[4]) {
+ uint8_t WB[9];
+ WB[0] = blockno;
+ memcpy(WB + 1,data,8);
+ doMAC_N(WB,sizeof(WB),div_key,MAC);
+ //printf("Cal wb mac block [%02x][%02x%02x%02x%02x%02x%02x%02x%02x] : MAC [%02x%02x%02x%02x]",WB[0],WB[1],WB[2],WB[3],WB[4],WB[5],WB[6],WB[7],WB[8],MAC[0],MAC[1],MAC[2],MAC[3]);
+}
+
+static bool select_only(uint8_t *CSN, uint8_t *CCNR, bool use_credit_key, bool verbose) {
+ UsbCommand resp;
+
+ UsbCommand c = {CMD_READER_ICLASS, {0}};
+ c.arg[0] = FLAG_ICLASS_READER_ONLY_ONCE | FLAG_ICLASS_READER_CC | FLAG_ICLASS_READER_ONE_TRY;
+ if (use_credit_key)
+ c.arg[0] |= FLAG_ICLASS_READER_CEDITKEY;
+
+ clearCommandBuffer();
+ SendCommand(&c);
+ if (!WaitForResponseTimeout(CMD_ACK,&resp,4500)) {
+ PrintAndLog("Command execute timeout");
+ return false;
+ }
+
+ uint8_t isOK = resp.arg[0] & 0xff;
+ uint8_t *data = resp.d.asBytes;
+
+ memcpy(CSN,data,8);
+
+ if (CCNR!=NULL)
+ memcpy(CCNR,data+16,8);
+
+ if(isOK > 0) {
+ if (verbose) PrintAndLog("CSN: %s",sprint_hex(CSN,8));
+ }
+
+ if(isOK <= 1){
+ PrintAndLog("Failed to obtain CC! Aborting");
+ return false;
+ }
+ return true;
+}
+
+static bool select_and_auth(uint8_t *KEY, uint8_t *MAC, uint8_t *div_key, bool use_credit_key, bool elite, bool rawkey, bool verbose) {
+ uint8_t CSN[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t CCNR[12]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+
+ if (!select_only(CSN, CCNR, use_credit_key, verbose))
+ return false;
+
+ //get div_key
+ if(rawkey)
+ memcpy(div_key, KEY, 8);
+ else
+ HFiClassCalcDivKey(CSN, KEY, div_key, elite);
+
+ PrintAndLog("Authing with %s: %02x%02x%02x%02x%02x%02x%02x%02x", rawkey ? "raw key" : "diversified key", div_key[0],div_key[1],div_key[2],div_key[3],div_key[4],div_key[5],div_key[6],div_key[7]);
+
+ doMAC(CCNR, div_key, MAC);
+ UsbCommand resp;
+ UsbCommand d = {CMD_ICLASS_AUTHENTICATION, {0}};
+ memcpy(d.d.asBytes, MAC, 4);
+ clearCommandBuffer();
+ SendCommand(&d);
+ if (!WaitForResponseTimeout(CMD_ACK,&resp,4500)) {
+ PrintAndLog("Auth Command execute timeout");
+ return false;
+ }
+ uint8_t isOK = resp.arg[0] & 0xff;
+ if (!isOK) {
+ PrintAndLog("Authentication error");
+ return false;
+ }
+ return true;
+}
+
+int usage_hf_iclass_dump(void) {
+ PrintAndLog("Usage: hf iclass dump f <fileName> k <Key> c <CreditKey> e|r\n");
+ PrintAndLog("Options:");
+ PrintAndLog(" f <filename> : specify a filename to save dump to");
+ PrintAndLog(" k <Key> : *Access Key as 16 hex symbols or 1 hex to select key from memory");
+ PrintAndLog(" c <CreditKey>: Credit Key as 16 hex symbols or 1 hex to select key from memory");
+ PrintAndLog(" e : If 'e' is specified, the key is interpreted as the 16 byte");
+ PrintAndLog(" Custom Key (KCus), which can be obtained via reader-attack");
+ PrintAndLog(" See 'hf iclass sim 2'. This key should be on iclass-format");
+ PrintAndLog(" r : If 'r' is specified, the key is interpreted as raw block 3/4");
+ PrintAndLog(" NOTE: * = required");
+ PrintAndLog("Samples:");
+ PrintAndLog(" hf iclass dump k 001122334455667B");
+ PrintAndLog(" hf iclass dump k AAAAAAAAAAAAAAAA c 001122334455667B");
+ PrintAndLog(" hf iclass dump k AAAAAAAAAAAAAAAA e");
+ return 0;
+}
+
+int CmdHFiClassReader_Dump(const char *Cmd) {
+
+ uint8_t MAC[4] = {0x00,0x00,0x00,0x00};
+ uint8_t div_key[8] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t c_div_key[8] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t blockno = 0;
+ uint8_t numblks = 0;
+ uint8_t maxBlk = 31;
+ uint8_t app_areas = 1;
+ uint8_t kb = 2;
+ uint8_t KEY[8] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t CreditKEY[8] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t keyNbr = 0;
+ uint8_t dataLen = 0;
+ uint8_t fileNameLen = 0;
+ char filename[FILE_PATH_SIZE]={0};
+ char tempStr[50] = {0};
+ bool have_debit_key = false;
+ bool have_credit_key = false;
+ bool use_credit_key = false;
+ bool elite = false;
+ bool rawkey = false;
+ bool errors = false;
+ uint8_t cmdp = 0;
+
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ case 'H':
+ return usage_hf_iclass_dump();
+ case 'c':
+ case 'C':
+ have_credit_key = true;
+ dataLen = param_getstr(Cmd, cmdp+1, tempStr);
+ if (dataLen == 16) {
+ errors = param_gethex(tempStr, 0, CreditKEY, dataLen);
+ } else if (dataLen == 1) {
+ keyNbr = param_get8(Cmd, cmdp+1);
+ if (keyNbr < ICLASS_KEYS_MAX) {
+ memcpy(CreditKEY, iClass_Key_Table[keyNbr], 8);
+ } else {
+ PrintAndLog("\nERROR: Credit KeyNbr is invalid\n");
+ errors = true;
+ }
+ } else {
+ PrintAndLog("\nERROR: Credit Key is incorrect length\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'e':
+ case 'E':
+ elite = true;
+ cmdp++;
+ break;
+ case 'f':
+ case 'F':
+ fileNameLen = param_getstr(Cmd, cmdp+1, filename);
+ if (fileNameLen < 1) {
+ PrintAndLog("No filename found after f");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'k':
+ case 'K':
+ have_debit_key = true;
+ dataLen = param_getstr(Cmd, cmdp+1, tempStr);
+ if (dataLen == 16) {
+ errors = param_gethex(tempStr, 0, KEY, dataLen);
+ } else if (dataLen == 1) {
+ keyNbr = param_get8(Cmd, cmdp+1);
+ if (keyNbr < ICLASS_KEYS_MAX) {
+ memcpy(KEY, iClass_Key_Table[keyNbr], 8);
+ } else {
+ PrintAndLog("\nERROR: Credit KeyNbr is invalid\n");
+ errors = true;
+ }
+ } else {
+ PrintAndLog("\nERROR: Credit Key is incorrect length\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'r':
+ case 'R':
+ rawkey = true;
+ cmdp++;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'\n", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ if(errors) return usage_hf_iclass_dump();
+ }
+
+ if (cmdp < 2) return usage_hf_iclass_dump();
+ // if no debit key given try credit key on AA1 (not for iclass but for some picopass this will work)
+ if (!have_debit_key && have_credit_key) use_credit_key = true;
+
+ //get config and first 3 blocks
+ UsbCommand c = {CMD_READER_ICLASS, {FLAG_ICLASS_READER_CSN |
+ FLAG_ICLASS_READER_CONF | FLAG_ICLASS_READER_ONLY_ONCE | FLAG_ICLASS_READER_ONE_TRY}};
+ UsbCommand resp;
+ uint8_t tag_data[255*8];
+
+ clearCommandBuffer();
+ SendCommand(&c);
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 4500)) {
+ PrintAndLog("Command execute timeout");
+ ul_switch_off_field();
+ return 0;
+ }
+ uint8_t readStatus = resp.arg[0] & 0xff;
+ uint8_t * data = resp.d.asBytes;
+
+ if(readStatus == 0){
+ PrintAndLog("No tag found...");
+ ul_switch_off_field();
+ return 0;
+ }
+
+ if( readStatus & (FLAG_ICLASS_READER_CSN|FLAG_ICLASS_READER_CONF|FLAG_ICLASS_READER_CC)){
+ memcpy(tag_data, data, 8*3);
+ blockno+=2; // 2 to force re-read of block 2 later. (seems to respond differently..)
+ numblks = data[8];
+ getMemConfig(data[13], data[12], &maxBlk, &app_areas, &kb);
+ // large memory - not able to dump pages currently
+ if (numblks > maxBlk) numblks = maxBlk;
+ }
+
+ ul_switch_off_field();
+ // authenticate debit key and get div_key - later store in dump block 3
+ if (!select_and_auth(KEY, MAC, div_key, use_credit_key, elite, rawkey, false)){
+ //try twice - for some reason it sometimes fails the first time...
+ if (!select_and_auth(KEY, MAC, div_key, use_credit_key, elite, rawkey, false)){
+ ul_switch_off_field();
+ return 0;
+ }
+ }
+
+ // begin dump
+ UsbCommand w = {CMD_ICLASS_DUMP, {blockno, numblks-blockno+1}};
+ clearCommandBuffer();
+ SendCommand(&w);
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 4500)) {
+ PrintAndLog("Command execute time-out 1");
+ ul_switch_off_field();
+ return 1;
+ }
+ uint32_t blocksRead = resp.arg[1];
+ uint8_t isOK = resp.arg[0] & 0xff;
+ if (!isOK && !blocksRead) {
+ PrintAndLog("Read Block Failed");
+ ul_switch_off_field();
+ return 0;
+ }
+ uint32_t startindex = resp.arg[2];
+ if (blocksRead*8 > sizeof(tag_data)-(blockno*8)) {
+ PrintAndLog("Data exceeded Buffer size!");
+ blocksRead = (sizeof(tag_data)/8) - blockno;
+ }
+ // response ok - now get bigbuf content of the dump
+ GetFromBigBuf(tag_data+(blockno*8), blocksRead*8, startindex);
+ WaitForResponse(CMD_ACK,NULL);
+ size_t gotBytes = blocksRead*8 + blockno*8;
+
+ // try AA2
+ if (have_credit_key) {
+ //turn off hf field before authenticating with different key
+ ul_switch_off_field();
+ memset(MAC,0,4);
+ // AA2 authenticate credit key and git c_div_key - later store in dump block 4
+ if (!select_and_auth(CreditKEY, MAC, c_div_key, true, false, false, false)){
+ //try twice - for some reason it sometimes fails the first time...
+ if (!select_and_auth(CreditKEY, MAC, c_div_key, true, false, false, false)){
+ ul_switch_off_field();
+ return 0;
+ }
+ }
+ // do we still need to read more block? (aa2 enabled?)
+ if (maxBlk > blockno+numblks+1) {
+ // setup dump and start
+ w.arg[0] = blockno + blocksRead;
+ w.arg[1] = maxBlk - (blockno + blocksRead);
+ clearCommandBuffer();
+ SendCommand(&w);
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 4500)) {
+ PrintAndLog("Command execute timeout 2");
+ ul_switch_off_field();
+ return 0;
+ }
+ uint8_t isOK = resp.arg[0] & 0xff;
+ blocksRead = resp.arg[1];
+ if (!isOK && !blocksRead) {
+ PrintAndLog("Read Block Failed 2");
+ ul_switch_off_field();
+ return 0;
+ }
+
+ startindex = resp.arg[2];
+ if (blocksRead*8 > sizeof(tag_data)-gotBytes) {
+ PrintAndLog("Data exceeded Buffer size!");
+ blocksRead = (sizeof(tag_data) - gotBytes)/8;
+ }
+ // get dumped data from bigbuf
+ GetFromBigBuf(tag_data+gotBytes, blocksRead*8, startindex);
+ WaitForResponse(CMD_ACK,NULL);
+
+ gotBytes += blocksRead*8;
+ } else { //field is still on - turn it off...
+ ul_switch_off_field();
+ }
}
- return 0;
-}
-
-int CmdHFiClassReader(const char *Cmd)
-{
- UsbCommand c = {CMD_READER_ICLASS, {0}};
- SendCommand(&c);
- UsbCommand resp;
- while(!ukbhit()){
- if (WaitForResponseTimeout(CMD_ACK,&resp,4500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- uint8_t * data = resp.d.asBytes;
-
- PrintAndLog("isOk:%02x", isOK);
- if( isOK == 0){
- //Aborted
- PrintAndLog("Quitting...");
- return 0;
- }
- if(isOK > 0)
- {
- PrintAndLog("CSN: %s",sprint_hex(data,8));
- }
- if(isOK >= 1)
- {
- PrintAndLog("CC: %s",sprint_hex(data+8,8));
- }else{
- PrintAndLog("No CC obtained");
- }
- } else {
- PrintAndLog("Command execute timeout");
- }
- }
-
- return 0;
-}
-
-int CmdHFiClassReader_Replay(const char *Cmd)
-{
- uint8_t readerType = 0;
- uint8_t MAC[4]={0x00, 0x00, 0x00, 0x00};
-
- if (strlen(Cmd)<1) {
- PrintAndLog("Usage: hf iclass replay <MAC>");
- PrintAndLog(" sample: hf iclass replay 00112233");
+ // add diversified keys to dump
+ if (have_debit_key) memcpy(tag_data+(3*8),div_key,8);
+ if (have_credit_key) memcpy(tag_data+(4*8),c_div_key,8);
+ // print the dump
+ printf("CSN |00| %s |\n", sprint_hex(tag_data, 8));
+ printf("CSN |00| %s |\n", sprint_hex(tag_data, 8));
+ printIclassDumpContents(tag_data, 1, (gotBytes/8)-1, gotBytes-8);
+
+ if (filename[0] == 0){
+ snprintf(filename, FILE_PATH_SIZE,"iclass_tagdump-%02x%02x%02x%02x%02x%02x%02x%02x",
+ tag_data[0],tag_data[1],tag_data[2],tag_data[3],
+ tag_data[4],tag_data[5],tag_data[6],tag_data[7]);
+ }
+
+ // save the dump to .bin file
+ PrintAndLog("Saving dump file - %d blocks read", gotBytes/8);
+ saveFile(filename, "bin", tag_data, gotBytes);
+ return 1;
+}
+
+static int WriteBlock(uint8_t blockno, uint8_t *bldata, uint8_t *KEY, bool use_credit_key, bool elite, bool rawkey, bool verbose) {
+ uint8_t MAC[4]={0x00,0x00,0x00,0x00};
+ uint8_t div_key[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ if (!select_and_auth(KEY, MAC, div_key, use_credit_key, elite, rawkey, verbose))
+ return 0;
+
+ UsbCommand resp;
+
+ Calc_wb_mac(blockno,bldata,div_key,MAC);
+ UsbCommand w = {CMD_ICLASS_WRITEBLOCK, {blockno}};
+ memcpy(w.d.asBytes, bldata, 8);
+ memcpy(w.d.asBytes + 8, MAC, 4);
+
+ clearCommandBuffer();
+ SendCommand(&w);
+ if (!WaitForResponseTimeout(CMD_ACK,&resp,4500)) {
+ PrintAndLog("Write Command execute timeout");
+ return 0;
+ }
+ uint8_t isOK = resp.arg[0] & 0xff;
+ if (!isOK) {
+ PrintAndLog("Write Block Failed");
+ return 0;
+ }
+ PrintAndLog("Write Block Successful");
+ return 1;
+}
+
+int usage_hf_iclass_writeblock(void) {
+ PrintAndLog("Options:");
+ PrintAndLog(" b <Block> : The block number as 2 hex symbols");
+ PrintAndLog(" d <data> : Set the Data to write as 16 hex symbols");
+ PrintAndLog(" k <Key> : Access Key as 16 hex symbols or 1 hex to select key from memory");
+ PrintAndLog(" c : If 'c' is specified, the key set is assumed to be the credit key\n");
+ PrintAndLog(" e : If 'e' is specified, elite computations applied to key");
+ PrintAndLog(" r : If 'r' is specified, no computations applied to key");
+ PrintAndLog("Samples:");
+ PrintAndLog(" hf iclass writeblk b 0A d AAAAAAAAAAAAAAAA k 001122334455667B");
+ PrintAndLog(" hf iclass writeblk b 1B d AAAAAAAAAAAAAAAA k 001122334455667B c");
+ PrintAndLog(" hf iclass writeblk b 0A d AAAAAAAAAAAAAAAA n 0");
return 0;
- }
-
- if (param_gethex(Cmd, 0, MAC, 8)) {
- PrintAndLog("MAC must include 8 HEX symbols");
- return 1;
- }
-
- UsbCommand c = {CMD_READER_ICLASS_REPLAY, {readerType}};
- memcpy(c.d.asBytes, MAC, 4);
- SendCommand(&c);
-
- return 0;
-}
-
-int CmdHFiClassReader_Dump(const char *Cmd)
-{
- uint8_t readerType = 0;
- uint8_t MAC[4]={0x00,0x00,0x00,0x00};
- uint8_t KEY[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
- uint8_t CSN[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
- uint8_t CCNR[12]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
- //uint8_t CC_temp[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
- uint8_t div_key[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
- uint8_t keytable[128] = {0};
- int elite = 0;
- uint8_t *used_key;
- int i;
- if (strlen(Cmd)<1)
- {
- PrintAndLog("Usage: hf iclass dump <Key> [e]");
- PrintAndLog(" Key - A 16 byte master key");
- PrintAndLog(" e - If 'e' is specified, the key is interpreted as the 16 byte");
- PrintAndLog(" Custom Key (KCus), which can be obtained via reader-attack");
- PrintAndLog(" See 'hf iclass sim 2'. This key should be on iclass-format");
- PrintAndLog(" sample: hf iclass dump 0011223344556677");
-
-
- return 0;
- }
-
- if (param_gethex(Cmd, 0, KEY, 16))
- {
- PrintAndLog("KEY must include 16 HEX symbols");
- return 1;
- }
-
- if (param_getchar(Cmd, 1) == 'e')
- {
- PrintAndLog("Elite switch on");
- elite = 1;
-
- //calc h2
- hash2(KEY, keytable);
- printarr_human_readable("keytable", keytable, 128);
-
- }
-
- UsbCommand resp;
- uint8_t key_sel[8] = {0};
- uint8_t key_sel_p[8] = { 0 };
-
- //HACK -- Below is for testing without access to a tag
- uint8_t fake_dummy_test = false;
- if(fake_dummy_test)
- {
- uint8_t xdata[16] = {0x01,0x02,0x03,0x04,0xF7,0xFF,0x12,0xE0, //CSN from http://www.proxmark.org/forum/viewtopic.php?pid=11230#p11230
- 0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF}; // Just a random CC. Would be good to add a real testcase here
- memcpy(resp.d.asBytes,xdata, 16);
- resp.arg[0] = 2;
- }
-
- //End hack
-
-
- UsbCommand c = {CMD_READER_ICLASS, {0}};
- c.arg[0] = FLAG_ICLASS_READER_ONLY_ONCE| FLAG_ICLASS_READER_GET_CC;
- if(!fake_dummy_test)
- SendCommand(&c);
-
-
-
- if (fake_dummy_test || WaitForResponseTimeout(CMD_ACK,&resp,4500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- uint8_t * data = resp.d.asBytes;
-
- memcpy(CSN,data,8);
- memcpy(CCNR,data+8,8);
-
- PrintAndLog("isOk:%02x", isOK);
-
- if(isOK > 0)
- {
- PrintAndLog("CSN: %s",sprint_hex(CSN,8));
- }
- if(isOK > 1)
- {
- if(elite)
- {
- //Get the key index (hash1)
- uint8_t key_index[8] = {0};
-
- hash1(CSN, key_index);
- printvar("hash1", key_index,8);
- for(i = 0; i < 8 ; i++)
- key_sel[i] = keytable[key_index[i]] & 0xFF;
- PrintAndLog("Pre-fortified 'permuted' HS key that would be needed by an iclass reader to talk to above CSN:");
- printvar("k_sel", key_sel,8);
- //Permute from iclass format to standard format
- permutekey_rev(key_sel,key_sel_p);
- used_key = key_sel_p;
- }else{
- //Perhaps this should also be permuted to std format?
- // Something like the code below? I have no std system
- // to test this with /Martin
-
- //uint8_t key_sel_p[8] = { 0 };
- //permutekey_rev(KEY,key_sel_p);
- //used_key = key_sel_p;
-
- used_key = KEY;
-
- }
-
- PrintAndLog("Pre-fortified key that would be needed by the OmniKey reader to talk to above CSN:");
- printvar("Used key",used_key,8);
- diversifyKey(CSN,used_key, div_key);
- PrintAndLog("Hash0, a.k.a diversified key, that is computed using Ksel and stored in the card (Block 3):");
- printvar("Div key", div_key, 8);
- printvar("CC_NR:",CCNR,12);
- doMAC(CCNR,12,div_key, MAC);
- printvar("MAC", MAC, 4);
-
- UsbCommand d = {CMD_READER_ICLASS_REPLAY, {readerType}};
- memcpy(d.d.asBytes, MAC, 4);
- if(!fake_dummy_test) SendCommand(&d);
-
- }else{
- PrintAndLog("Failed to obtain CC! Aborting");
- }
- } else {
- PrintAndLog("Command execute timeout");
- }
-
- return 0;
-}
-
-int CmdHFiClass_iso14443A_write(const char *Cmd)
-{
- uint8_t readerType = 0;
- uint8_t MAC[4]={0x00,0x00,0x00,0x00};
- uint8_t KEY[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
- uint8_t CSN[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
- uint8_t CCNR[12]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
- uint8_t div_key[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
-
- uint8_t blockNo=0;
- uint8_t bldata[8]={0};
-
- if (strlen(Cmd)<3)
- {
- PrintAndLog("Usage: hf iclass write <Key> <Block> <Data>");
- PrintAndLog(" sample: hf iclass write 0011223344556677 10 AAAAAAAAAAAAAAAA");
- return 0;
- }
-
- if (param_gethex(Cmd, 0, KEY, 16))
- {
- PrintAndLog("KEY must include 16 HEX symbols");
- return 1;
- }
-
- blockNo = param_get8(Cmd, 1);
- if (blockNo>32)
- {
- PrintAndLog("Error: Maximum number of blocks is 32 for iClass 2K Cards!");
- return 1;
- }
- if (param_gethex(Cmd, 2, bldata, 8))
- {
- PrintAndLog("Block data must include 8 HEX symbols");
- return 1;
- }
-
- UsbCommand c = {CMD_ICLASS_ISO14443A_WRITE, {0}};
- SendCommand(&c);
- UsbCommand resp;
-
- if (WaitForResponseTimeout(CMD_ACK,&resp,4500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- uint8_t * data = resp.d.asBytes;
-
- memcpy(CSN,data,8);
- memcpy(CCNR,data+8,8);
- PrintAndLog("DEBUG: %s",sprint_hex(CSN,8));
- PrintAndLog("DEBUG: %s",sprint_hex(CCNR,8));
- PrintAndLog("isOk:%02x", isOK);
- } else {
- PrintAndLog("Command execute timeout");
- }
-
- diversifyKey(CSN,KEY, div_key);
-
- PrintAndLog("Div Key: %s",sprint_hex(div_key,8));
- doMAC(CCNR, 12,div_key, MAC);
-
- UsbCommand c2 = {CMD_ICLASS_ISO14443A_WRITE, {readerType,blockNo}};
- memcpy(c2.d.asBytes, bldata, 8);
- memcpy(c2.d.asBytes+8, MAC, 4);
- SendCommand(&c2);
-
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- uint8_t * data = resp.d.asBytes;
-
- if (isOK)
- PrintAndLog("isOk:%02x data:%s", isOK, sprint_hex(data, 4));
- else
- PrintAndLog("isOk:%02x", isOK);
- } else {
- PrintAndLog("Command execute timeout");
- }
- return 0;
-}
-int CmdHFiClass_loclass(const char *Cmd)
-{
+}
+
+int CmdHFiClass_WriteBlock(const char *Cmd) {
+ uint8_t blockno=0;
+ uint8_t bldata[8]={0,0,0,0,0,0,0,0};
+ uint8_t KEY[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t keyNbr = 0;
+ uint8_t dataLen = 0;
+ char tempStr[50] = {0};
+ bool use_credit_key = false;
+ bool elite = false;
+ bool rawkey= false;
+ bool errors = false;
+ uint8_t cmdp = 0;
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ case 'H':
+ return usage_hf_iclass_writeblock();
+ case 'b':
+ case 'B':
+ if (param_gethex(Cmd, cmdp+1, &blockno, 2)) {
+ PrintAndLog("Block No must include 2 HEX symbols\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'c':
+ case 'C':
+ use_credit_key = true;
+ cmdp++;
+ break;
+ case 'd':
+ case 'D':
+ if (param_gethex(Cmd, cmdp+1, bldata, 16))
+ {
+ PrintAndLog("KEY must include 16 HEX symbols\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'e':
+ case 'E':
+ elite = true;
+ cmdp++;
+ break;
+ case 'k':
+ case 'K':
+ dataLen = param_getstr(Cmd, cmdp+1, tempStr);
+ if (dataLen == 16) {
+ errors = param_gethex(tempStr, 0, KEY, dataLen);
+ } else if (dataLen == 1) {
+ keyNbr = param_get8(Cmd, cmdp+1);
+ if (keyNbr < ICLASS_KEYS_MAX) {
+ memcpy(KEY, iClass_Key_Table[keyNbr], 8);
+ } else {
+ PrintAndLog("\nERROR: Credit KeyNbr is invalid\n");
+ errors = true;
+ }
+ } else {
+ PrintAndLog("\nERROR: Credit Key is incorrect length\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'r':
+ case 'R':
+ rawkey = true;
+ cmdp++;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'\n", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ if(errors) return usage_hf_iclass_writeblock();
+ }
+
+ if (cmdp < 6) return usage_hf_iclass_writeblock();
+ int ans = WriteBlock(blockno, bldata, KEY, use_credit_key, elite, rawkey, true);
+ ul_switch_off_field();
+ return ans;
+}
+
+int usage_hf_iclass_clone(void) {
+ PrintAndLog("Usage: hf iclass clone f <tagfile.bin> b <first block> l <last block> k <KEY> c e|r");
+ PrintAndLog("Options:");
+ PrintAndLog(" f <filename>: specify a filename to clone from");
+ PrintAndLog(" b <Block> : The first block to clone as 2 hex symbols");
+ PrintAndLog(" l <Last Blk>: Set the Data to write as 16 hex symbols");
+ PrintAndLog(" k <Key> : Access Key as 16 hex symbols or 1 hex to select key from memory");
+ PrintAndLog(" c : If 'c' is specified, the key set is assumed to be the credit key\n");
+ PrintAndLog(" e : If 'e' is specified, elite computations applied to key");
+ PrintAndLog(" r : If 'r' is specified, no computations applied to key");
+ PrintAndLog("Samples:");
+ PrintAndLog(" hf iclass clone f iclass_tagdump-121345.bin b 06 l 1A k 1122334455667788 e");
+ PrintAndLog(" hf iclass clone f iclass_tagdump-121345.bin b 05 l 19 k 0");
+ PrintAndLog(" hf iclass clone f iclass_tagdump-121345.bin b 06 l 19 k 0 e");
+ return -1;
+}
+
+int CmdHFiClassCloneTag(const char *Cmd) {
+ char filename[FILE_PATH_SIZE] = { 0x00 };
+ char tempStr[50]={0};
+ uint8_t KEY[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t keyNbr = 0;
+ uint8_t fileNameLen = 0;
+ uint8_t startblock = 0;
+ uint8_t endblock = 0;
+ uint8_t dataLen = 0;
+ bool use_credit_key = false;
+ bool elite = false;
+ bool rawkey = false;
+ bool errors = false;
+ uint8_t cmdp = 0;
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ case 'H':
+ return usage_hf_iclass_clone();
+ case 'b':
+ case 'B':
+ if (param_gethex(Cmd, cmdp+1, &startblock, 2)) {
+ PrintAndLog("Start Block No must include 2 HEX symbols\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'c':
+ case 'C':
+ use_credit_key = true;
+ cmdp++;
+ break;
+ case 'e':
+ case 'E':
+ elite = true;
+ cmdp++;
+ break;
+ case 'f':
+ case 'F':
+ fileNameLen = param_getstr(Cmd, cmdp+1, filename);
+ if (fileNameLen < 1) {
+ PrintAndLog("No filename found after f");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'k':
+ case 'K':
+ dataLen = param_getstr(Cmd, cmdp+1, tempStr);
+ if (dataLen == 16) {
+ errors = param_gethex(tempStr, 0, KEY, dataLen);
+ } else if (dataLen == 1) {
+ keyNbr = param_get8(Cmd, cmdp+1);
+ if (keyNbr < ICLASS_KEYS_MAX) {
+ memcpy(KEY, iClass_Key_Table[keyNbr], 8);
+ } else {
+ PrintAndLog("\nERROR: Credit KeyNbr is invalid\n");
+ errors = true;
+ }
+ } else {
+ PrintAndLog("\nERROR: Credit Key is incorrect length\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'l':
+ case 'L':
+ if (param_gethex(Cmd, cmdp+1, &endblock, 2)) {
+ PrintAndLog("Start Block No must include 2 HEX symbols\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'r':
+ case 'R':
+ rawkey = true;
+ cmdp++;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'\n", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ if(errors) return usage_hf_iclass_clone();
+ }
+
+ if (cmdp < 8) return usage_hf_iclass_clone();
+
+ FILE *f;
+
+ iclass_block_t tag_data[USB_CMD_DATA_SIZE/12];
+
+ if ((endblock-startblock+1)*12 > USB_CMD_DATA_SIZE) {
+ PrintAndLog("Trying to write too many blocks at once. Max: %d", USB_CMD_DATA_SIZE/8);
+ }
+ // file handling and reading
+ f = fopen(filename,"rb");
+ if(!f) {
+ PrintAndLog("Failed to read from file '%s'", filename);
+ return 1;
+ }
+
+ if (startblock<5) {
+ PrintAndLog("You cannot write key blocks this way. yet... make your start block > 4");
+ fclose(f);
+ return 0;
+ }
+ // now read data from the file from block 6 --- 19
+ // ok we will use this struct [data 8 bytes][MAC 4 bytes] for each block calculate all mac number for each data
+ // then copy to usbcommand->asbytes; the max is 32 - 6 = 24 block 12 bytes each block 288 bytes then we can only accept to clone 21 blocks at the time,
+ // else we have to create a share memory
+ int i;
+ fseek(f,startblock*8,SEEK_SET);
+ size_t bytes_read = fread(tag_data,sizeof(iclass_block_t),endblock - startblock + 1,f);
+ if ( bytes_read == 0){
+ PrintAndLog("File reading error.");
+ fclose(f);
+ return 2;
+ }
+
+ uint8_t MAC[4]={0x00,0x00,0x00,0x00};
+ uint8_t div_key[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+
+ if (!select_and_auth(KEY, MAC, div_key, use_credit_key, elite, rawkey, true))
+ return 0;
+
+ UsbCommand w = {CMD_ICLASS_CLONE,{startblock,endblock}};
+ uint8_t *ptr;
+ // calculate all mac for every the block we will write
+ for (i = startblock; i <= endblock; i++){
+ Calc_wb_mac(i,tag_data[i - startblock].d,div_key,MAC);
+ // usb command d start pointer = d + (i - 6) * 12
+ // memcpy(pointer,tag_data[i - 6],8) 8 bytes
+ // memcpy(pointer + 8,mac,sizoof(mac) 4 bytes;
+ // next one
+ ptr = w.d.asBytes + (i - startblock) * 12;
+ memcpy(ptr, &(tag_data[i - startblock].d[0]), 8);
+ memcpy(ptr + 8,MAC, 4);
+ }
+ uint8_t p[12];
+ for (i = 0; i <= endblock - startblock;i++){
+ memcpy(p,w.d.asBytes + (i * 12),12);
+ printf("Block |%02x|",i + startblock);
+ printf(" %02x%02x%02x%02x%02x%02x%02x%02x |",p[0],p[1],p[2],p[3],p[4],p[5],p[6],p[7]);
+ printf(" MAC |%02x%02x%02x%02x|\n",p[8],p[9],p[10],p[11]);
+ }
+ UsbCommand resp;
+ clearCommandBuffer();
+ SendCommand(&w);
+ if (!WaitForResponseTimeout(CMD_ACK,&resp,4500)) {
+ PrintAndLog("Command execute timeout");
+ return 0;
+ }
+ return 1;
+}
+
+static int ReadBlock(uint8_t *KEY, uint8_t blockno, uint8_t keyType, bool elite, bool rawkey, bool verbose) {
+ uint8_t MAC[4]={0x00,0x00,0x00,0x00};
+ uint8_t div_key[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+
+ if (!select_and_auth(KEY, MAC, div_key, (keyType==0x18), elite, rawkey, verbose))
+ return 0;
+
+ UsbCommand resp;
+ UsbCommand w = {CMD_ICLASS_READBLOCK, {blockno}};
+ clearCommandBuffer();
+ SendCommand(&w);
+ if (!WaitForResponseTimeout(CMD_ACK,&resp,4500)) {
+ PrintAndLog("Command execute timeout");
+ return 0;
+ }
+
+ uint8_t isOK = resp.arg[0] & 0xff;
+ if (!isOK) {
+ PrintAndLog("Read Block Failed");
+ return 0;
+ }
+ //data read is stored in: resp.d.asBytes[0-15]
+ if (verbose) PrintAndLog("Block %02X: %s\n",blockno, sprint_hex(resp.d.asBytes,8));
+ return 1;
+}
+
+int usage_hf_iclass_readblock(void) {
+ PrintAndLog("Usage: hf iclass readblk b <Block> k <Key> c e|r\n");
+ PrintAndLog("Options:");
+ PrintAndLog(" b <Block> : The block number as 2 hex symbols");
+ PrintAndLog(" k <Key> : Access Key as 16 hex symbols or 1 hex to select key from memory");
+ PrintAndLog(" c : If 'c' is specified, the key set is assumed to be the credit key\n");
+ PrintAndLog(" e : If 'e' is specified, elite computations applied to key");
+ PrintAndLog(" r : If 'r' is specified, no computations applied to key");
+ PrintAndLog("Samples:");
+ PrintAndLog(" hf iclass readblk b 06 k 0011223344556677");
+ PrintAndLog(" hf iclass readblk b 1B k 0011223344556677 c");
+ PrintAndLog(" hf iclass readblk b 0A k 0");
+ return 0;
+}
+
+int CmdHFiClass_ReadBlock(const char *Cmd) {
+ uint8_t blockno=0;
+ uint8_t keyType = 0x88; //debit key
+ uint8_t KEY[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t keyNbr = 0;
+ uint8_t dataLen = 0;
+ char tempStr[50] = {0};
+ bool elite = false;
+ bool rawkey = false;
+ bool errors = false;
+ uint8_t cmdp = 0;
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ case 'H':
+ return usage_hf_iclass_readblock();
+ case 'b':
+ case 'B':
+ if (param_gethex(Cmd, cmdp+1, &blockno, 2)) {
+ PrintAndLog("Block No must include 2 HEX symbols\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'c':
+ case 'C':
+ keyType = 0x18;
+ cmdp++;
+ break;
+ case 'e':
+ case 'E':
+ elite = true;
+ cmdp++;
+ break;
+ case 'k':
+ case 'K':
+ dataLen = param_getstr(Cmd, cmdp+1, tempStr);
+ if (dataLen == 16) {
+ errors = param_gethex(tempStr, 0, KEY, dataLen);
+ } else if (dataLen == 1) {
+ keyNbr = param_get8(Cmd, cmdp+1);
+ if (keyNbr < ICLASS_KEYS_MAX) {
+ memcpy(KEY, iClass_Key_Table[keyNbr], 8);
+ } else {
+ PrintAndLog("\nERROR: Credit KeyNbr is invalid\n");
+ errors = true;
+ }
+ } else {
+ PrintAndLog("\nERROR: Credit Key is incorrect length\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'r':
+ case 'R':
+ rawkey = true;
+ cmdp++;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'\n", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ if(errors) return usage_hf_iclass_readblock();
+ }
+
+ if (cmdp < 4) return usage_hf_iclass_readblock();
+
+ return ReadBlock(KEY, blockno, keyType, elite, rawkey, true);
+}
+
+int CmdHFiClass_loclass(const char *Cmd) {
char opt = param_getchar(Cmd, 0);
if (strlen(Cmd)<1 || opt == 'h') {
PrintAndLog("f <filename> Bruteforce iclass dumpfile");
PrintAndLog(" An iclass dumpfile is assumed to consist of an arbitrary number of");
PrintAndLog(" malicious CSNs, and their protocol responses");
- PrintAndLog(" The the binary format of the file is expected to be as follows: ");
+ PrintAndLog(" The binary format of the file is expected to be as follows: ");
PrintAndLog(" <8 byte CSN><8 byte CC><4 byte NR><4 byte MAC>");
PrintAndLog(" <8 byte CSN><8 byte CC><4 byte NR><4 byte MAC>");
PrintAndLog(" <8 byte CSN><8 byte CC><4 byte NR><4 byte MAC>");
return 0;
}
char fileName[255] = {0};
- if(opt == 'f')
- {
- if(param_getstr(Cmd, 1, fileName) > 0)
- {
- return bruteforceFileNoKeys(fileName);
- }else
- {
- PrintAndLog("You must specify a filename");
- }
+ if(opt == 'f') {
+ if(param_getstr(Cmd, 1, fileName) > 0) {
+ return bruteforceFileNoKeys(fileName);
+ } else {
+ PrintAndLog("You must specify a filename");
+ // no return?
+ }
}
- else if(opt == 't')
- {
+ else if(opt == 't') {
int errors = testCipherUtils();
errors += testMAC();
errors += doKeyTests(0);
errors += testElite();
- if(errors)
+ if(errors) prnlog("OBS! There were errors!!!");
+ return errors;
+ }
+ return 0;
+}
+
+void printIclassDumpContents(uint8_t *iclass_dump, uint8_t startblock, uint8_t endblock, size_t filesize) {
+ uint8_t blockdata[8];
+ uint8_t mem_config;
+ memcpy(&mem_config, iclass_dump + 13,1);
+ uint8_t maxmemcount;
+ uint8_t filemaxblock = filesize / 8;
+
+ if (mem_config & 0x80)
+ maxmemcount = 255;
+ else
+ maxmemcount = 31;
+ //PrintAndLog ("endblock: %d, filesize: %d, maxmemcount: %d, filemaxblock: %d", endblock,filesize, maxmemcount, filemaxblock);
+
+ if (startblock == 0)
+ startblock = 6;
+
+ if ((endblock > maxmemcount) || (endblock == 0))
+ endblock = maxmemcount;
+
+ if (endblock > filemaxblock)
+ endblock = filemaxblock;
+
+ int i = startblock;
+ int j;
+ while (i <= endblock){
+ printf("Block |%02X| ",i);
+ memcpy(blockdata, iclass_dump + (i * 8), 8);
+ for (j = 0;j < 8;j++)
+ printf("%02X ", blockdata[j]);
+ printf("|\n");
+ i++;
+ }
+}
+
+int usage_hf_iclass_readtagfile() {
+ PrintAndLog("Usage: hf iclass readtagfile <filename> [startblock] [endblock]");
+ return 1;
+}
+
+int CmdHFiClassReadTagFile(const char *Cmd) {
+ int startblock = 0;
+ int endblock = 0;
+ char tempnum[5];
+ FILE *f;
+ char filename[FILE_PATH_SIZE];
+ if (param_getstr(Cmd, 0, filename) < 1)
+ return usage_hf_iclass_readtagfile();
+
+ if (param_getstr(Cmd,1,(char *)&tempnum) < 1)
+ startblock = 0;
+ else
+ sscanf(tempnum,"%d",&startblock);
+
+ if (param_getstr(Cmd,2,(char *)&tempnum) < 1)
+ endblock = 0;
+ else
+ sscanf(tempnum,"%d",&endblock);
+
+ // file handling and reading
+ f = fopen(filename,"rb");
+ if(!f) {
+ PrintAndLog("Failed to read from file '%s'", filename);
+ return 1;
+ }
+ fseek(f, 0, SEEK_END);
+ long fsize = ftell(f);
+ fseek(f, 0, SEEK_SET);
+
+ if ( fsize < 0 ) {
+ PrintAndLog("Error, when getting filesize");
+ fclose(f);
+ return 1;
+ }
+
+ uint8_t *dump = malloc(fsize);
+ size_t bytes_read = fread(dump, 1, fsize, f);
+ fclose(f);
+
+ uint8_t *csn = dump;
+ printf("CSN [00] | %s |\n", sprint_hex(csn, 8) );
+ printIclassDumpContents(dump,startblock,endblock,bytes_read);
+ free(dump);
+ return 0;
+}
+
+/*
+uint64_t xorcheck(uint64_t sdiv,uint64_t hdiv) {
+ uint64_t new_div = 0x00;
+ new_div ^= sdiv;
+ new_div ^= hdiv;
+ return new_div;
+}
+
+uint64_t hexarray_to_uint64(uint8_t *key) {
+ char temp[17];
+ uint64_t uint_key;
+ for (int i = 0;i < 8;i++)
+ sprintf(&temp[(i *2)],"%02X",key[i]);
+ temp[16] = '\0';
+ if (sscanf(temp,"%016"llX,&uint_key) < 1)
+ return 0;
+ return uint_key;
+}
+*/
+void HFiClassCalcDivKey(uint8_t *CSN, uint8_t *KEY, uint8_t *div_key, bool elite){
+ uint8_t keytable[128] = {0};
+ uint8_t key_index[8] = {0};
+ if (elite) {
+ uint8_t key_sel[8] = { 0 };
+ uint8_t key_sel_p[8] = { 0 };
+ hash2(KEY, keytable);
+ hash1(CSN, key_index);
+ for(uint8_t i = 0; i < 8 ; i++)
+ key_sel[i] = keytable[key_index[i]] & 0xFF;
+
+ //Permute from iclass format to standard format
+ permutekey_rev(key_sel, key_sel_p);
+ diversifyKey(CSN, key_sel_p, div_key);
+ } else {
+ diversifyKey(CSN, KEY, div_key);
+ }
+}
+
+//when told CSN, oldkey, newkey, if new key is elite (elite), and if old key was elite (oldElite)
+//calculate and return xor_div_key (ready for a key write command)
+//print all div_keys if verbose
+static void HFiClassCalcNewKey(uint8_t *CSN, uint8_t *OLDKEY, uint8_t *NEWKEY, uint8_t *xor_div_key, bool elite, bool oldElite, bool verbose){
+ uint8_t old_div_key[8] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t new_div_key[8] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ //get old div key
+ HFiClassCalcDivKey(CSN, OLDKEY, old_div_key, oldElite);
+ //get new div key
+ HFiClassCalcDivKey(CSN, NEWKEY, new_div_key, elite);
+
+ for (uint8_t i = 0; i < sizeof(old_div_key); i++){
+ xor_div_key[i] = old_div_key[i] ^ new_div_key[i];
+ }
+ if (verbose) {
+ printf("Old Div Key : %s\n",sprint_hex(old_div_key,8));
+ printf("New Div Key : %s\n",sprint_hex(new_div_key,8));
+ printf("Xor Div Key : %s\n",sprint_hex(xor_div_key,8));
+ }
+}
+
+int usage_hf_iclass_calc_newkey(void) {
+ PrintAndLog("HELP : Manage iClass Keys in client memory:\n");
+ PrintAndLog("Usage: hf iclass calc_newkey o <Old key> n <New key> s [csn] e");
+ PrintAndLog(" Options:");
+ PrintAndLog(" o <oldkey> : *specify a key as 16 hex symbols or a key number as 1 symbol");
+ PrintAndLog(" n <newkey> : *specify a key as 16 hex symbols or a key number as 1 symbol");
+ PrintAndLog(" s <csn> : specify a card Serial number to diversify the key (if omitted will attempt to read a csn)");
+ PrintAndLog(" e : specify new key as elite calc");
+ PrintAndLog(" ee : specify old and new key as elite calc");
+ PrintAndLog("Samples:");
+ PrintAndLog(" e key to e key given csn : hf iclass calcnewkey o 1122334455667788 n 2233445566778899 s deadbeafdeadbeaf ee");
+ PrintAndLog(" std key to e key read csn: hf iclass calcnewkey o 1122334455667788 n 2233445566778899 e");
+ PrintAndLog(" std to std read csn : hf iclass calcnewkey o 1122334455667788 n 2233445566778899");
+ PrintAndLog("NOTE: * = required\n");
+
+ return 1;
+}
+
+int CmdHFiClassCalcNewKey(const char *Cmd) {
+ uint8_t OLDKEY[8] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t NEWKEY[8] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t xor_div_key[8] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t CSN[8] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t CCNR[12] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t keyNbr = 0;
+ uint8_t dataLen = 0;
+ char tempStr[50] = {0};
+ bool givenCSN = false;
+ bool oldElite = false;
+ bool elite = false;
+ bool errors = false;
+ uint8_t cmdp = 0;
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
{
- prnlog("OBS! There were errors!!!");
+ case 'h':
+ case 'H':
+ return usage_hf_iclass_calc_newkey();
+ case 'e':
+ case 'E':
+ dataLen = param_getstr(Cmd, cmdp, tempStr);
+ if (dataLen==2)
+ oldElite = true;
+ elite = true;
+ cmdp++;
+ break;
+ case 'n':
+ case 'N':
+ dataLen = param_getstr(Cmd, cmdp+1, tempStr);
+ if (dataLen == 16) {
+ errors = param_gethex(tempStr, 0, NEWKEY, dataLen);
+ } else if (dataLen == 1) {
+ keyNbr = param_get8(Cmd, cmdp+1);
+ if (keyNbr < ICLASS_KEYS_MAX) {
+ memcpy(NEWKEY, iClass_Key_Table[keyNbr], 8);
+ } else {
+ PrintAndLog("\nERROR: NewKey Nbr is invalid\n");
+ errors = true;
+ }
+ } else {
+ PrintAndLog("\nERROR: NewKey is incorrect length\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'o':
+ case 'O':
+ dataLen = param_getstr(Cmd, cmdp+1, tempStr);
+ if (dataLen == 16) {
+ errors = param_gethex(tempStr, 0, OLDKEY, dataLen);
+ } else if (dataLen == 1) {
+ keyNbr = param_get8(Cmd, cmdp+1);
+ if (keyNbr < ICLASS_KEYS_MAX) {
+ memcpy(OLDKEY, iClass_Key_Table[keyNbr], 8);
+ } else {
+ PrintAndLog("\nERROR: Credit KeyNbr is invalid\n");
+ errors = true;
+ }
+ } else {
+ PrintAndLog("\nERROR: Credit Key is incorrect length\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 's':
+ case 'S':
+ givenCSN = true;
+ if (param_gethex(Cmd, cmdp+1, CSN, 16))
+ return usage_hf_iclass_calc_newkey();
+ cmdp += 2;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'\n", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
}
- return errors;
+ if(errors) return usage_hf_iclass_calc_newkey();
}
+ if (cmdp < 4) return usage_hf_iclass_calc_newkey();
+
+ if (!givenCSN)
+ if (!select_only(CSN, CCNR, false, true))
+ return 0;
+
+ HFiClassCalcNewKey(CSN, OLDKEY, NEWKEY, xor_div_key, elite, oldElite, true);
+ return 0;
+}
+
+static int loadKeys(char *filename) {
+ FILE *f;
+ f = fopen(filename,"rb");
+ if(!f) {
+ PrintAndLog("Failed to read from file '%s'", filename);
+ return 0;
+ }
+ fseek(f, 0, SEEK_END);
+ long fsize = ftell(f);
+ fseek(f, 0, SEEK_SET);
+
+ if ( fsize < 0 ) {
+ PrintAndLog("Error, when getting filesize");
+ fclose(f);
+ return 1;
+ }
+
+ uint8_t *dump = malloc(fsize);
+
+ size_t bytes_read = fread(dump, 1, fsize, f);
+ fclose(f);
+ if (bytes_read > ICLASS_KEYS_MAX * 8){
+ PrintAndLog("File is too long to load - bytes: %u", bytes_read);
+ free(dump);
+ return 0;
+ }
+ uint8_t i = 0;
+ for (; i < bytes_read/8; i++){
+ memcpy(iClass_Key_Table[i],dump+(i*8),8);
+ }
+ free(dump);
+ PrintAndLog("%u keys loaded", i);
+ return 1;
+}
+
+static int saveKeys(char *filename) {
+ FILE *f;
+ f = fopen(filename,"wb");
+ if (f == NULL) {
+ printf("error opening file %s\n",filename);
+ return 0;
+ }
+ for (uint8_t i = 0; i < ICLASS_KEYS_MAX; i++){
+ if (fwrite(iClass_Key_Table[i],8,1,f) != 1){
+ PrintAndLog("save key failed to write to file: %s", filename);
+ break;
+ }
+ }
+ fclose(f);
+ return 0;
+}
+
+static int printKeys(void) {
+ PrintAndLog("");
+ for (uint8_t i = 0; i < ICLASS_KEYS_MAX; i++){
+ PrintAndLog("%u: %s", i, sprint_hex(iClass_Key_Table[i],8));
+ }
+ PrintAndLog("");
+ return 0;
+}
+
+int usage_hf_iclass_managekeys(void) {
+ PrintAndLog("HELP : Manage iClass Keys in client memory:\n");
+ PrintAndLog("Usage: hf iclass managekeys n [keynbr] k [key] f [filename] s l p\n");
+ PrintAndLog(" Options:");
+ PrintAndLog(" n <keynbr> : specify the keyNbr to set in memory");
+ PrintAndLog(" k <key> : set a key in memory");
+ PrintAndLog(" f <filename>: specify a filename to use with load or save operations");
+ PrintAndLog(" s : save keys in memory to file specified by filename");
+ PrintAndLog(" l : load keys to memory from file specified by filename");
+ PrintAndLog(" p : print keys loaded into memory\n");
+ PrintAndLog("Samples:");
+ PrintAndLog(" set key : hf iclass managekeys n 0 k 1122334455667788");
+ PrintAndLog(" save key file: hf iclass managekeys f mykeys.bin s");
+ PrintAndLog(" load key file: hf iclass managekeys f mykeys.bin l");
+ PrintAndLog(" print keys : hf iclass managekeys p\n");
return 0;
}
-static command_t CommandTable[] =
-{
- {"help", CmdHelp, 1, "This help"},
- {"list", CmdHFiClassList, 0, "[Deprecated] List iClass history"},
- {"snoop", CmdHFiClassSnoop, 0, "Eavesdrop iClass communication"},
- {"sim", CmdHFiClassSim, 0, "Simulate iClass tag"},
- {"reader",CmdHFiClassReader, 0, "Read an iClass tag"},
- {"replay", CmdHFiClassReader_Replay, 0, "Read an iClass tag via Reply Attack"},
- {"dump", CmdHFiClassReader_Dump, 0, "Authenticate and Dump iClass tag"},
- {"write", CmdHFiClass_iso14443A_write, 0, "Authenticate and Write iClass block"},
- {"loclass", CmdHFiClass_loclass, 1, "Use loclass to perform bruteforce of reader attack dump"},
- {NULL, NULL, 0, NULL}
+int CmdHFiClassManageKeys(const char *Cmd) {
+ uint8_t keyNbr = 0;
+ uint8_t dataLen = 0;
+ uint8_t KEY[8] = {0};
+ char filename[FILE_PATH_SIZE];
+ uint8_t fileNameLen = 0;
+ bool errors = false;
+ uint8_t operation = 0;
+ char tempStr[20];
+ uint8_t cmdp = 0;
+
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ case 'H':
+ return usage_hf_iclass_managekeys();
+ case 'f':
+ case 'F':
+ fileNameLen = param_getstr(Cmd, cmdp+1, filename);
+ if (fileNameLen < 1) {
+ PrintAndLog("No filename found after f");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'n':
+ case 'N':
+ keyNbr = param_get8(Cmd, cmdp+1);
+ if (keyNbr == 0) {
+ PrintAndLog("Wrong block number");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'k':
+ case 'K':
+ operation += 3; //set key
+ dataLen = param_getstr(Cmd, cmdp+1, tempStr);
+ if (dataLen == 16) { //ul-c or ev1/ntag key length
+ errors = param_gethex(tempStr, 0, KEY, dataLen);
+ } else {
+ PrintAndLog("\nERROR: Key is incorrect length\n");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'p':
+ case 'P':
+ operation += 4; //print keys in memory
+ cmdp++;
+ break;
+ case 'l':
+ case 'L':
+ operation += 5; //load keys from file
+ cmdp++;
+ break;
+ case 's':
+ case 'S':
+ operation += 6; //save keys to file
+ cmdp++;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'\n", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ if(errors) return usage_hf_iclass_managekeys();
+ }
+ if (operation == 0){
+ PrintAndLog("no operation specified (load, save, or print)\n");
+ return usage_hf_iclass_managekeys();
+ }
+ if (operation > 6){
+ PrintAndLog("Too many operations specified\n");
+ return usage_hf_iclass_managekeys();
+ }
+ if (operation > 4 && fileNameLen == 0){
+ PrintAndLog("You must enter a filename when loading or saving\n");
+ return usage_hf_iclass_managekeys();
+ }
+
+ switch (operation){
+ case 3: memcpy(iClass_Key_Table[keyNbr], KEY, 8); return 1;
+ case 4: return printKeys();
+ case 5: return loadKeys(filename);
+ case 6: return saveKeys(filename);
+ break;
+ }
+ return 0;
+}
+
+static command_t CommandTable[] = {
+ {"help", CmdHelp, 1, "This help"},
+ {"calcnewkey", CmdHFiClassCalcNewKey, 1, "[options..] Calc Diversified keys (blocks 3 & 4) to write new keys"},
+ {"clone", CmdHFiClassCloneTag, 0, "[options..] Authenticate and Clone from iClass bin file"},
+ {"decrypt", CmdHFiClassDecrypt, 1, "[f <fname>] Decrypt tagdump" },
+ {"dump", CmdHFiClassReader_Dump, 0, "[options..] Authenticate and Dump iClass tag's AA1"},
+ {"eload", CmdHFiClassELoad, 0, "[f <fname>] (experimental) Load data into iClass emulator memory"},
+ {"encryptblk", CmdHFiClassEncryptBlk, 1, "<BlockData> Encrypt given block data"},
+ {"list", CmdHFiClassList, 0, " (Deprecated) List iClass history"},
+ {"loclass", CmdHFiClass_loclass, 1, "[options..] Use loclass to perform bruteforce of reader attack dump"},
+ {"managekeys", CmdHFiClassManageKeys, 1, "[options..] Manage the keys to use with iClass"},
+ {"readblk", CmdHFiClass_ReadBlock, 0, "[options..] Authenticate and Read iClass block"},
+ {"reader",CmdHFiClassReader, 0, "Read an iClass tag"},
+ {"readtagfile", CmdHFiClassReadTagFile, 1, "[options..] Display Content from tagfile"},
+ {"replay", CmdHFiClassReader_Replay, 0, "<mac> Read an iClass tag via Reply Attack"},
+ {"sim", CmdHFiClassSim, 0, "[options..] Simulate iClass tag"},
+ {"snoop", CmdHFiClassSnoop, 0, " Eavesdrop iClass communication"},
+ {"writeblk", CmdHFiClass_WriteBlock, 0, "[options..] Authenticate and Write iClass block"},
+ {NULL, NULL, 0, NULL}
};
-int CmdHFiClass(const char *Cmd)
-{
- CmdsParse(CommandTable, Cmd);
- return 0;
+int CmdHFiClass(const char *Cmd) {
+ clearCommandBuffer();
+ CmdsParse(CommandTable, Cmd);
+ return 0;
}
-int CmdHelp(const char *Cmd)
-{
- CmdsHelp(CommandTable);
+int CmdHelp(const char *Cmd) {
+ CmdsHelp(CommandTable);
return 0;
}
projects / proxmark3-svn / blobdiff