Implemented new optimized version of MAC-calculation for iclass

[proxmark3-svn] / armsrc / lfops.c

diff --git a/armsrc/lfops.c b/armsrc/lfops.c
index 201a52f20e05c3395fb9ac2b138ef8c6553b3c71..e34eab35f5bc813f8201b699967db819ed9da556 100644 (file)
--- a/armsrc/lfops.c
+++ b/armsrc/lfops.c
@@ -15,130 +15,44 @@
 #include "crc16.h"
 #include "string.h"
 #include "lfdemod.h"
 #include "crc16.h"
 #include "string.h"
 #include "lfdemod.h"

+#include "lfsampling.h"

 
 
 /**
 
 
 /**

-* Does the sample acquisition. If threshold is specified, the actual sampling
-* is not commenced until the threshold has been reached.
-* @param trigger_threshold - the threshold
-* @param silent - is true, now outputs are made. If false, dbprints the status
-*/
-void DoAcquisition125k_internal(int trigger_threshold,bool silent)
-{
-    uint8_t *dest = BigBuf_get_addr();
-    int n = BigBuf_max_trace_len();
-    int i;
-
-    memset(dest, 0, n);
-    i = 0;
-    for(;;) {
-        if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
-            AT91C_BASE_SSC->SSC_THR = 0x43;
-            LED_D_ON();
-        }
-        if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
-            dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
-            LED_D_OFF();
-            if (trigger_threshold != -1 && dest[i] < trigger_threshold)
-                continue;
-            else
-                trigger_threshold = -1;
-            if (++i >= n) break;
-        }
-    }
-    if(!silent)
-    {
-        Dbprintf("buffer samples: %02x %02x %02x %02x %02x %02x %02x %02x ...",
-                 dest[0], dest[1], dest[2], dest[3], dest[4], dest[5], dest[6], dest[7]);
-
-    }
-}
-/**
-* Perform sample aquisition.
-*/
-void DoAcquisition125k(int trigger_threshold)
-{
-    DoAcquisition125k_internal(trigger_threshold, false);
-}
-
-/**
-* Setup the FPGA to listen for samples. This method downloads the FPGA bitstream
-* if not already loaded, sets divisor and starts up the antenna.
-* @param divisor : 1, 88> 255 or negative ==> 134.8 KHz
-*                                 0 or 95 ==> 125 KHz
-*
-**/
-void LFSetupFPGAForADC(int divisor, bool lf_field)
-{
-    FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
-    if ( (divisor == 1) || (divisor < 0) || (divisor > 255) )
-        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
-    else if (divisor == 0)
-        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-    else
-        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor);
-
-    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | (lf_field ? FPGA_LF_ADC_READER_FIELD : 0));
-
-    // Connect the A/D to the peak-detected low-frequency path.
-    SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
-    // Give it a bit of time for the resonant antenna to settle.
-    SpinDelay(50);
-    // Now set up the SSC to get the ADC samples that are now streaming at us.
-    FpgaSetupSsc();
-}
-/**
-* Initializes the FPGA, and acquires the samples.
-**/
-void AcquireRawAdcSamples125k(int divisor)
-{
-    LFSetupFPGAForADC(divisor, true);
-    // Now call the acquisition routine
-    DoAcquisition125k_internal(-1,false);
-}
-/**
-* Initializes the FPGA for snoop-mode, and acquires the samples.
-**/
-
-void SnoopLFRawAdcSamples(int divisor, int trigger_threshold)
-{
-    LFSetupFPGAForADC(divisor, false);
-    DoAcquisition125k(trigger_threshold);
-}
-
+ * Function to do a modulation and then get samples.
+ * @param delay_off
+ * @param period_0
+ * @param period_1
+ * @param command
+ */

 void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, uint8_t *command)
 {
 
 void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, uint8_t *command)
 {
 

-    /* Make sure the tag is reset */
-    FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
-    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-    SpinDelay(2500);
-
-

     int divisor_used = 95; // 125 KHz
     // see if 'h' was specified
 
     if (command[strlen((char *) command) - 1] == 'h')
         divisor_used = 88; // 134.8 KHz
 
     int divisor_used = 95; // 125 KHz
     // see if 'h' was specified
 
     if (command[strlen((char *) command) - 1] == 'h')
         divisor_used = 88; // 134.8 KHz
 

+       sample_config sc = { 0,0,1, divisor_used, 0};
+       setSamplingConfig(&sc);

 
 

-    FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used);
-    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-    // Give it a bit of time for the resonant antenna to settle.
-    SpinDelay(50);
+       /* Make sure the tag is reset */
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+       SpinDelay(2500);

 
 

-    // And a little more time for the tag to fully power up
-    SpinDelay(2000);
+       LFSetupFPGAForADC(sc.divisor, 1);

 
 

-    // Now set up the SSC to get the ADC samples that are now streaming at us.
-    FpgaSetupSsc();
+       // And a little more time for the tag to fully power up
+       SpinDelay(2000);

 
     // now modulate the reader field
     while(*command != '\0' && *command != ' ') {
         FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
         LED_D_OFF();
         SpinDelayUs(delay_off);
 
     // now modulate the reader field
     while(*command != '\0' && *command != ' ') {
         FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
         LED_D_OFF();
         SpinDelayUs(delay_off);

-        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used);
+               FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor);

 
         FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
         LED_D_ON();
 
         FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
         LED_D_ON();


@@ -150,14 +64,16 @@ void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1,
     FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
     LED_D_OFF();
     SpinDelayUs(delay_off);
     FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
     LED_D_OFF();
     SpinDelayUs(delay_off);

-    FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used);
+       FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor);

 
     FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
 
     // now do the read
 
     FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
 
     // now do the read

-    DoAcquisition125k(-1);
+       DoAcquisition_config(false);

 }
 
 }
 

+
+

 /* blank r/w tag data stream
 ...0000000000000000 01111111
 1010101010101010101010101010101010101010101010101010101010101010
 /* blank r/w tag data stream
 ...0000000000000000 01111111
 1010101010101010101010101010101010101010101010101010101010101010


@@ -178,7 +94,7 @@ void ReadTItag(void)
  #define FREQHI 134200
 
     signed char *dest = (signed char *)BigBuf_get_addr();
  #define FREQHI 134200
 
     signed char *dest = (signed char *)BigBuf_get_addr();

-    uint16_t n = BigBuf_max_trace_len();
+    uint16_t n = BigBuf_max_traceLen();

     // 128 bit shift register [shift3:shift2:shift1:shift0]
     uint32_t shift3 = 0, shift2 = 0, shift1 = 0, shift0 = 0;
 
     // 128 bit shift register [shift3:shift2:shift1:shift0]
     uint32_t shift3 = 0, shift2 = 0, shift1 = 0, shift0 = 0;
 


@@ -331,7 +247,7 @@ void AcquireTiType(void)
 
     // clear buffer
        uint32_t *BigBuf = (uint32_t *)BigBuf_get_addr();
 
     // clear buffer
        uint32_t *BigBuf = (uint32_t *)BigBuf_get_addr();

-    memset(BigBuf,0,BigBuf_max_trace_len()/sizeof(uint32_t));
+    memset(BigBuf,0,BigBuf_max_traceLen()/sizeof(uint32_t));

 
     // Set up the synchronous serial port
     AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DIN;
 
     // Set up the synchronous serial port
     AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DIN;


@@ -633,8 +549,8 @@ void CmdHIDsimTAG(int hi, int lo, int ledcontrol)
 void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
 {
     uint8_t *dest = BigBuf_get_addr();
 void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
 {
     uint8_t *dest = BigBuf_get_addr();

-
-    size_t size=sizeof(BigBuf); 
+    const size_t sizeOfBigBuff = BigBuf_max_traceLen();
+    size_t size = 0; 

     uint32_t hi2=0, hi=0, lo=0;
     int idx=0;
     // Configure to go in 125Khz listen mode
     uint32_t hi2=0, hi=0, lo=0;
     int idx=0;
     // Configure to go in 125Khz listen mode


@@ -645,12 +561,9 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
         WDT_HIT();
         if (ledcontrol) LED_A_ON();
 
         WDT_HIT();
         if (ledcontrol) LED_A_ON();
 

-        DoAcquisition125k_internal(-1,true);
-        // FSK demodulator
-               idx = HIDdemodFSK(dest, BigBuf_max_trace_len(), &hi2, &hi, &lo);
-        WDT_HIT();
-        size = sizeof(BigBuf);
-
+               DoAcquisition_default(-1,true);
+               // FSK demodulator
+        size = sizeOfBigBuff;  //variable size will change after demod so re initialize it before use

                idx = HIDdemodFSK(dest, &size, &hi2, &hi, &lo);
         
                if (idx>0 && lo>0){
                idx = HIDdemodFSK(dest, &size, &hi2, &hi, &lo);
         
                if (idx>0 && lo>0){


@@ -709,6 +622,8 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
             }
             if (findone){
                 if (ledcontrol)        LED_A_OFF();
             }
             if (findone){
                 if (ledcontrol)        LED_A_OFF();

+                *high = hi;
+                *low = lo;

                 return;
             }
             // reset
                 return;
             }
             // reset


@@ -725,7 +640,7 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol)
     uint8_t *dest = BigBuf_get_addr();
 
        size_t size=0, idx=0;
     uint8_t *dest = BigBuf_get_addr();
 
        size_t size=0, idx=0;

-    int clk=0, invert=0, errCnt=0;
+    int clk=0, invert=0, errCnt=0, maxErr=20;

     uint64_t lo=0;
     // Configure to go in 125Khz listen mode
     LFSetupFPGAForADC(95, true);
     uint64_t lo=0;
     // Configure to go in 125Khz listen mode
     LFSetupFPGAForADC(95, true);


@@ -735,11 +650,11 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol)
         WDT_HIT();
         if (ledcontrol) LED_A_ON();
 
         WDT_HIT();
         if (ledcontrol) LED_A_ON();
 

-        DoAcquisition125k_internal(-1,true);
-        size  = BigBuf_max_trace_len();
+               DoAcquisition_default(-1,true);
+               size  = BigBuf_max_traceLen();

         //Dbprintf("DEBUG: Buffer got");
                //askdemod and manchester decode
         //Dbprintf("DEBUG: Buffer got");
                //askdemod and manchester decode

-               errCnt = askmandemod(dest, &size, &clk, &invert);
+               errCnt = askmandemod(dest, &size, &clk, &invert, maxErr);

         //Dbprintf("DEBUG: ASK Got");
         WDT_HIT();
 
         //Dbprintf("DEBUG: ASK Got");
         WDT_HIT();
 


@@ -756,6 +671,8 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol)
             }
             if (findone){
                 if (ledcontrol)        LED_A_OFF();
             }
             if (findone){
                 if (ledcontrol)        LED_A_OFF();

+                *high=lo>>32;
+                *low=lo & 0xFFFFFFFF;

                 return;
             }
         } else{
                 return;
             }
         } else{


@@ -786,10 +703,10 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
     while(!BUTTON_PRESS()) {
         WDT_HIT();
         if (ledcontrol) LED_A_ON();
     while(!BUTTON_PRESS()) {
         WDT_HIT();
         if (ledcontrol) LED_A_ON();

-        DoAcquisition125k_internal(-1,true);
-        //fskdemod and get start index
+               DoAcquisition_default(-1,true);
+               //fskdemod and get start index

         WDT_HIT();
         WDT_HIT();

-        idx = IOdemodFSK(dest, BigBuf_max_trace_len());
+        idx = IOdemodFSK(dest, BigBuf_max_traceLen());

         if (idx>0){
             //valid tag found
 
         if (idx>0){
             //valid tag found
 


@@ -822,6 +739,8 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
             if (findone){
                 if (ledcontrol)        LED_A_OFF();
                 //LED_A_OFF();
             if (findone){
                 if (ledcontrol)        LED_A_OFF();
                 //LED_A_OFF();

+                *high=code;
+                *low=code2;

                 return;
             }
             code=code2=0;
                 return;
             }
             code=code2=0;


@@ -965,7 +884,7 @@ void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode)
     //int m=0, i=0; //enio adjustment 12/10/14
     uint32_t m=0, i=0;
     FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
     //int m=0, i=0; //enio adjustment 12/10/14
     uint32_t m=0, i=0;
     FpgaDownloadAndGo(FPGA_BITSTREAM_LF);

-    m = BigBuf_max_trace_len();
+    m = BigBuf_max_traceLen();

     // Clear destination buffer before sending the command
     memset(dest, 128, m);
     // Connect the A/D to the peak-detected low-frequency path.
     // Clear destination buffer before sending the command
     memset(dest, 128, m);
     // Connect the A/D to the peak-detected low-frequency path.


@@ -1030,7 +949,7 @@ void T55xxReadTrace(void){
     int m=0, i=0;
 
     FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
     int m=0, i=0;
 
     FpgaDownloadAndGo(FPGA_BITSTREAM_LF);

-    m = BigBuf_max_trace_len();
+    m = BigBuf_max_traceLen();

     // Clear destination buffer before sending the command
     memset(dest, 128, m);
     // Connect the A/D to the peak-detected low-frequency path.
     // Clear destination buffer before sending the command
     memset(dest, 128, m);
     // Connect the A/D to the peak-detected low-frequency path.


@@ -1381,7 +1300,7 @@ int DemodPCF7931(uint8_t **outBlocks) {
     uint8_t BitStream[256];
     uint8_t Blocks[8][16];
     uint8_t *GraphBuffer = BigBuf_get_addr();
     uint8_t BitStream[256];
     uint8_t Blocks[8][16];
     uint8_t *GraphBuffer = BigBuf_get_addr();

-    int GraphTraceLen = BigBuf_max_trace_len();
+    int GraphTraceLen = BigBuf_max_traceLen();

     int i, j, lastval, bitidx, half_switch;
     int clock = 64;
     int tolerance = clock / 8;
     int i, j, lastval, bitidx, half_switch;
     int clock = 64;
     int tolerance = clock / 8;


@@ -1391,7 +1310,9 @@ int DemodPCF7931(uint8_t **outBlocks) {
     int lmin=128, lmax=128;
     uint8_t dir;
 
     int lmin=128, lmax=128;
     uint8_t dir;
 

-    AcquireRawAdcSamples125k(0);
+       LFSetupFPGAForADC(95, true);
+       DoAcquisition_default(0, 0);
+

 
     lmin = 64;
     lmax = 192;
 
     lmin = 64;
     lmax = 192;


@@ -1808,7 +1729,7 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
     fwd_bit_count = Prepare_Cmd( FWD_CMD_READ );
     fwd_bit_count += Prepare_Addr( Address );
 
     fwd_bit_count = Prepare_Cmd( FWD_CMD_READ );
     fwd_bit_count += Prepare_Addr( Address );
 

-    m = BigBuf_max_trace_len();
+    m = BigBuf_max_traceLen();

     // Clear destination buffer before sending the command
     memset(dest, 128, m);
     // Connect the A/D to the peak-detected low-frequency path.
     // Clear destination buffer before sending the command
     memset(dest, 128, m);
     // Connect the A/D to the peak-detected low-frequency path.