FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
//spindelay(60); // greg - experiment to get rid of some of the 0 byte/failed reads
c = 0;
- getNext = FALSE;
+ getNext = false;
for(;;) {
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
AT91C_BASE_SSC->SSC_THR = 0x43;
// every other is Q. We just want power, so abs(I) + abs(Q) is
// close to what we want.
if(getNext) {
- int8_t r;
-
- if(b < 0) {
- r = -b;
- } else {
- r = b;
- }
- if(prev < 0) {
- r -= prev;
- } else {
- r += prev;
- }
+ uint8_t r = ABS(b) + ABS(prev);
dest[c++] = (uint8_t)r;
maxPos = i;
}
}
- // DbpString("SOF at %d, correlation %d", maxPos,max/(arraylen(FrameSOF)/skip));
+ // Dbprintf("SOF at %d, correlation %d", maxPos,max/(arraylen(FrameSOF)/skip));
int k = 0; // this will be our return value
corr1 *= 4;
if(corrEOF > corr1 && corrEOF > corr0) {
- // DbpString("EOF at %d", i);
+ // Dbprintf("EOF at %d", i);
break;
} else if(corr1 > corr0) {
i += arraylen(Logic1)/skip;
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
//spindelay(60); // greg - experiment to get rid of some of the 0 byte/failed reads
c = 0;
- getNext = FALSE;
+ getNext = false;
for(;;) {
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
AT91C_BASE_SSC->SSC_THR = 0x43;
// every other is Q. We just want power, so abs(I) + abs(Q) is
// close to what we want.
if(getNext) {
- int8_t r;
-
- if(b < 0) {
- r = -b;
- } else {
- r = b;
- }
- if(prev < 0) {
- r -= prev;
- } else {
- r += prev;
- }
+ uint8_t r = ABS(b) + ABS(prev);
dest[c++] = (uint8_t)r;
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
c = 0;
- getNext = FALSE;
+ getNext = false;
for(;;) {
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
AT91C_BASE_SSC->SSC_THR = 0x43;
// every other is Q. We just want power, so abs(I) + abs(Q) is
// close to what we want.
if(getNext) {
- int8_t r;
-
- if(b < 0) {
- r = -b;
- } else {
- r = b;
- }
- if(prev < 0) {
- r -= prev;
- } else {
- r += prev;
- }
+ uint8_t r = ABS(b) + ABS(prev);
dest[c++] = (uint8_t)r;
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
c = 0;
- getNext = FALSE;
+ getNext = false;
for(;;) {
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
AT91C_BASE_SSC->SSC_THR = 0x43;
// every other is Q. We just want power, so abs(I) + abs(Q) is
// close to what we want.
if(getNext) {
- int8_t r;
-
- if(b < 0) {
- r = -b;
- } else {
- r = b;
- }
- if(prev < 0) {
- r -= prev;
- } else {
- r += prev;
- }
+ uint8_t r = ABS(b) + ABS(prev);
dest[c++] = (uint8_t)r;
LED_C_OFF();
LED_D_OFF();
+ if (init) Iso15693InitReader();
+
int answerLen=0;
uint8_t *answer = BigBuf_get_addr() + 3660;
if (recv != NULL) memset(answer, 0, 100);
- if (init) Iso15693InitReader();
-
if (!speed) {
// low speed (1 out of 256)
CodeIso15693AsReader256(send, sendlen);
LED_C_OFF();
LED_D_OFF();
- uint8_t *answer1 = BigBuf_get_addr() + 3660;
- uint8_t *answer2 = BigBuf_get_addr() + 3760;
- uint8_t *answer3 = BigBuf_get_addr() + 3860;
-
int answerLen1 = 0;
int answerLen2 = 0;
int answerLen3 = 0;
int elapsed = 0;
uint8_t TagUID[8] = {0x00};
+ FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
+ uint8_t *answer1 = BigBuf_get_addr() + 3660;
+ uint8_t *answer2 = BigBuf_get_addr() + 3760;
+ uint8_t *answer3 = BigBuf_get_addr() + 3860;
// Blank arrays
memset(answer1, 0x00, 300);
- FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
-
SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
// Setup SSC
FpgaSetupSsc();
// Start from off (no field generated)
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
- SpinDelay(200);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ SpinDelay(200);
// Give the tags time to energize
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
LED_C_OFF();
LED_D_OFF();
- uint8_t *buf = BigBuf_get_addr() + 3660;
-
int answerLen1 = 0;
int samples = 0;
int tsamples = 0;
int wait = 0;
int elapsed = 0;
- memset(buf, 0x00, 100);
-
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
+ uint8_t *buf = BigBuf_get_addr() + 3660;
+ memset(buf, 0x00, 100);
+
SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
-
FpgaSetupSsc();
// Start from off (no field generated)
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
SpinDelay(200);
LED_A_OFF();