//-----------------------------------------------------------------------------\r
\r
#include "cmdhfmf.h"\r
-#include "./nonce2key/nonce2key.h"\r
+\r
+#include <inttypes.h>\r
+#include <string.h>\r
+#include <stdio.h>\r
+#include <stdlib.h>\r
+#include <ctype.h>\r
+#include "comms.h"\r
+#include "cmdmain.h"\r
+#include "cmdhfmfhard.h"\r
+#include "parity.h"\r
+#include "util.h"\r
+#include "util_posix.h"\r
+#include "usb_cmd.h"\r
+#include "ui.h"\r
+#include "mifare/mifarehost.h"\r
+#include "mifare.h"\r
+#include "mifare/mfkey.h"\r
+#include "hardnested/hardnested_bf_core.h"\r
+#include "cliparser/cliparser.h"\r
+#include "cmdhf14a.h"\r
+#include "mifare/mifaredefault.h"\r
+#include "mifare/mifare4.h"\r
+#include "mifare/mad.h"\r
+#include "mifare/ndef.h"\r
+#include "emv/dump.h"\r
+#include "protocols.h"\r
+\r
+#define NESTED_SECTOR_RETRY 10 // how often we try mfested() until we give up\r
\r
static int CmdHelp(const char *Cmd);\r
\r
int CmdHF14AMifare(const char *Cmd)\r
{\r
- uint32_t uid = 0;\r
- uint32_t nt = 0, nr = 0;\r
- uint64_t par_list = 0, ks_list = 0, r_key = 0;\r
- int16_t isOK = 0;\r
-\r
- UsbCommand c = {CMD_READER_MIFARE, {true, 0, 0}};\r
-\r
- // message\r
- printf("-------------------------------------------------------------------------\n");\r
- printf("Executing command. Expected execution time: 25sec on average :-)\n");\r
- printf("Press button on the proxmark3 device to abort both proxmark3 and client.\n");\r
- printf("-------------------------------------------------------------------------\n");\r
-\r
- \r
- start:\r
- clearCommandBuffer();\r
- SendCommand(&c);\r
- \r
- //flush queue\r
- while (ukbhit()) getchar();\r
-\r
- // wait cycle\r
- while (true) {\r
- printf(".");\r
- fflush(stdout);\r
- if (ukbhit()) {\r
- getchar();\r
- printf("\naborted via keyboard!\n");\r
- break;\r
- }\r
- \r
- UsbCommand resp;\r
- if (WaitForResponseTimeout(CMD_ACK, &resp, 1000)) {\r
- isOK = resp.arg[0];\r
- uid = (uint32_t)bytes_to_num(resp.d.asBytes + 0, 4);\r
- nt = (uint32_t)bytes_to_num(resp.d.asBytes + 4, 4);\r
- par_list = bytes_to_num(resp.d.asBytes + 8, 8);\r
- ks_list = bytes_to_num(resp.d.asBytes + 16, 8);\r
- nr = bytes_to_num(resp.d.asBytes + 24, 4);\r
- printf("\n\n");\r
- switch (isOK) {\r
- case -1 : PrintAndLog("Button pressed. Aborted.\n"); break;\r
- case -2 : PrintAndLog("Card is not vulnerable to Darkside attack (doesn't send NACK on authentication requests).\n"); break;\r
- case -3 : PrintAndLog("Card is not vulnerable to Darkside attack (its random number generator is not predictable).\n"); break;\r
- case -4 : PrintAndLog("Card is not vulnerable to Darkside attack (its random number generator seems to be based on the wellknown");\r
- PrintAndLog("generating polynomial with 16 effective bits only, but shows unexpected behaviour.\n"); break;\r
- default: ;\r
- }\r
- break;\r
- }\r
- } \r
-\r
- printf("\n");\r
- \r
- // error\r
- if (isOK != 1) return 1;\r
- \r
- // execute original function from util nonce2key\r
- if (nonce2key(uid, nt, nr, par_list, ks_list, &r_key)) {\r
- isOK = 2;\r
- PrintAndLog("Key not found (lfsr_common_prefix list is null). Nt=%08x", nt); \r
- PrintAndLog("Failing is expected to happen in 25%% of all cases. Trying again with a different reader nonce...");\r
- c.arg[0] = false;\r
- goto start;\r
- } else {\r
- isOK = 0;\r
- printf("------------------------------------------------------------------\n");\r
- PrintAndLog("Found valid key:%012"llx" \n", r_key);\r
+ int isOK = 0;\r
+ uint64_t key = 0;\r
+ isOK = mfDarkside(&key);\r
+ switch (isOK) {\r
+ case -1 : PrintAndLog("Button pressed. Aborted."); return 1;\r
+ case -2 : PrintAndLog("Card is not vulnerable to Darkside attack (doesn't send NACK on authentication requests)."); return 1;\r
+ case -3 : PrintAndLog("Card is not vulnerable to Darkside attack (its random number generator is not predictable)."); return 1;\r
+ case -4 : PrintAndLog("Card is not vulnerable to Darkside attack (its random number generator seems to be based on the wellknown");\r
+ PrintAndLog("generating polynomial with 16 effective bits only, but shows unexpected behaviour."); return 1;\r
+ case -5 : PrintAndLog("Aborted via keyboard."); return 1;\r
+ default : PrintAndLog("Found valid key:%012" PRIx64 "\n", key);\r
}\r
- \r
+\r
PrintAndLog("");\r
return 0;\r
}\r
\r
+\r
int CmdHF14AMfWrBl(const char *Cmd)\r
{\r
uint8_t blockNo = 0;\r
uint8_t keyType = 0;\r
uint8_t key[6] = {0, 0, 0, 0, 0, 0};\r
uint8_t bldata[16] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};\r
- \r
- char cmdp = 0x00;\r
+\r
+ char cmdp = 0x00;\r
\r
if (strlen(Cmd)<3) {\r
PrintAndLog("Usage: hf mf wrbl <block number> <key A/B> <key (12 hex symbols)> <block data (32 hex symbols)>");\r
PrintAndLog(" sample: hf mf wrbl 0 A FFFFFFFFFFFF 000102030405060708090A0B0C0D0E0F");\r
return 0;\r
- } \r
+ }\r
\r
blockNo = param_get8(Cmd, 0);\r
cmdp = param_getchar(Cmd, 1);\r
}\r
PrintAndLog("--block no:%d, key type:%c, key:%s", blockNo, keyType?'B':'A', sprint_hex(key, 6));\r
PrintAndLog("--data: %s", sprint_hex(bldata, 16));\r
- \r
- UsbCommand c = {CMD_MIFARE_WRITEBL, {blockNo, keyType, 0}};\r
+\r
+ UsbCommand c = {CMD_MIFARE_WRITEBL, {blockNo, keyType, 0}};\r
memcpy(c.d.asBytes, key, 6);\r
memcpy(c.d.asBytes + 10, bldata, 16);\r
- SendCommand(&c);\r
+ SendCommand(&c);\r
\r
UsbCommand resp;\r
if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
uint8_t blockNo = 0;\r
uint8_t keyType = 0;\r
uint8_t key[6] = {0, 0, 0, 0, 0, 0};\r
- \r
- char cmdp = 0x00;\r
+\r
+ char cmdp = 0x00;\r
\r
\r
if (strlen(Cmd)<3) {\r
PrintAndLog("Usage: hf mf rdbl <block number> <key A/B> <key (12 hex symbols)>");\r
PrintAndLog(" sample: hf mf rdbl 0 A FFFFFFFFFFFF ");\r
return 0;\r
- } \r
- \r
+ }\r
+\r
blockNo = param_get8(Cmd, 0);\r
cmdp = param_getchar(Cmd, 1);\r
if (cmdp == 0x00) {\r
return 1;\r
}\r
PrintAndLog("--block no:%d, key type:%c, key:%s ", blockNo, keyType?'B':'A', sprint_hex(key, 6));\r
- \r
- UsbCommand c = {CMD_MIFARE_READBL, {blockNo, keyType, 0}};\r
+\r
+ UsbCommand c = {CMD_MIFARE_READBL, {blockNo, keyType, 0}};\r
memcpy(c.d.asBytes, key, 6);\r
- SendCommand(&c);\r
+ SendCommand(&c);\r
\r
UsbCommand resp;\r
if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
uint8_t isOK = resp.arg[0] & 0xff;\r
uint8_t *data = resp.d.asBytes;\r
\r
- if (isOK)\r
+ if (isOK) {\r
PrintAndLog("isOk:%02x data:%s", isOK, sprint_hex(data, 16));\r
- else\r
+ } else {\r
PrintAndLog("isOk:%02x", isOK);\r
+ return 1;\r
+ }\r
+\r
+ if (mfIsSectorTrailer(blockNo) && (data[6] || data[7] || data[8])) {\r
+ PrintAndLogEx(NORMAL, "Trailer decoded:");\r
+ int bln = mfFirstBlockOfSector(mfSectorNum(blockNo));\r
+ int blinc = (mfNumBlocksPerSector(mfSectorNum(blockNo)) > 4) ? 5 : 1;\r
+ for (int i = 0; i < 4; i++) {\r
+ PrintAndLogEx(NORMAL, "Access block %d%s: %s", bln, ((blinc > 1) && (i < 3) ? "+" : "") , mfGetAccessConditionsDesc(i, &data[6]));\r
+ bln += blinc;\r
+ }\r
+ PrintAndLogEx(NORMAL, "UserData: %s", sprint_hex_inrow(&data[9], 1));\r
+ }\r
} else {\r
PrintAndLog("Command execute timeout");\r
+ return 2;\r
}\r
\r
- return 0;\r
+ return 0;\r
}\r
\r
int CmdHF14AMfRdSc(const char *Cmd)\r
uint8_t key[6] = {0, 0, 0, 0, 0, 0};\r
uint8_t isOK = 0;\r
uint8_t *data = NULL;\r
- char cmdp = 0x00;\r
+ char cmdp = 0x00;\r
\r
if (strlen(Cmd)<3) {\r
PrintAndLog("Usage: hf mf rdsc <sector number> <key A/B> <key (12 hex symbols)>");\r
PrintAndLog(" sample: hf mf rdsc 0 A FFFFFFFFFFFF ");\r
return 0;\r
- } \r
- \r
+ }\r
+\r
sectorNo = param_get8(Cmd, 0);\r
if (sectorNo > 39) {\r
PrintAndLog("Sector number must be less than 40");\r
return 1;\r
}\r
PrintAndLog("--sector no:%d key type:%c key:%s ", sectorNo, keyType?'B':'A', sprint_hex(key, 6));\r
- \r
+\r
UsbCommand c = {CMD_MIFARE_READSC, {sectorNo, keyType, 0}};\r
memcpy(c.d.asBytes, key, 6);\r
SendCommand(&c);\r
PrintAndLog("data : %s", sprint_hex(data + i * 16, 16));\r
}\r
PrintAndLog("trailer: %s", sprint_hex(data + (sectorNo<32?3:15) * 16, 16));\r
+\r
+ PrintAndLogEx(NORMAL, "Trailer decoded:");\r
+ int bln = mfFirstBlockOfSector(sectorNo);\r
+ int blinc = (mfNumBlocksPerSector(sectorNo) > 4) ? 5 : 1;\r
+ for (i = 0; i < 4; i++) {\r
+ PrintAndLogEx(NORMAL, "Access block %d%s: %s", bln, ((blinc > 1) && (i < 3) ? "+" : "") , mfGetAccessConditionsDesc(i, &(data + (sectorNo<32?3:15) * 16)[6]));\r
+ bln += blinc;\r
+ }\r
+ PrintAndLogEx(NORMAL, "UserData: %s", sprint_hex_inrow(&(data + (sectorNo<32?3:15) * 16)[9], 1));\r
}\r
} else {\r
PrintAndLog("Command execute timeout");\r
}\r
\r
- return 0;\r
+ return 0;\r
}\r
\r
uint8_t FirstBlockOfSector(uint8_t sectorNo)\r
}\r
}\r
\r
+static int ParamCardSizeSectors(const char c) {\r
+ int numSectors = 16;\r
+ switch (c) {\r
+ case '0' : numSectors = 5; break;\r
+ case '2' : numSectors = 32; break;\r
+ case '4' : numSectors = 40; break;\r
+ default: numSectors = 16;\r
+ }\r
+ return numSectors;\r
+}\r
+\r
+static int ParamCardSizeBlocks(const char c) {\r
+ int numBlocks = 16 * 4;\r
+ switch (c) {\r
+ case '0' : numBlocks = 5 * 4; break;\r
+ case '2' : numBlocks = 32 * 4; break;\r
+ case '4' : numBlocks = 32 * 4 + 8 * 16; break;\r
+ default: numBlocks = 16 * 4;\r
+ }\r
+ return numBlocks;\r
+}\r
+\r
int CmdHF14AMfDump(const char *Cmd)\r
{\r
uint8_t sectorNo, blockNo;\r
- \r
- uint8_t keyA[40][6];\r
- uint8_t keyB[40][6];\r
+\r
+ uint8_t keys[2][40][6];\r
uint8_t rights[40][4];\r
uint8_t carddata[256][16];\r
uint8_t numSectors = 16;\r
- \r
+\r
FILE *fin;\r
FILE *fout;\r
- \r
+\r
UsbCommand resp;\r
\r
char cmdp = param_getchar(Cmd, 0);\r
- switch (cmdp) {\r
- case '0' : numSectors = 5; break;\r
- case '1' : \r
- case '\0': numSectors = 16; break;\r
- case '2' : numSectors = 32; break;\r
- case '4' : numSectors = 40; break;\r
- default: numSectors = 16;\r
- } \r
- \r
- if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') {\r
- PrintAndLog("Usage: hf mf dump [card memory]");\r
+ numSectors = ParamCardSizeSectors(cmdp);\r
+\r
+ if (strlen(Cmd) > 3 || cmdp == 'h' || cmdp == 'H') {\r
+ PrintAndLog("Usage: hf mf dump [card memory] [k|m]");\r
PrintAndLog(" [card memory]: 0 = 320 bytes (Mifare Mini), 1 = 1K (default), 2 = 2K, 4 = 4K");\r
+ PrintAndLog(" k: Always try using both Key A and Key B for each sector, even if access bits would prohibit it");\r
+ PrintAndLog(" m: When missing access bits or keys, replace that block with NULL");\r
PrintAndLog("");\r
PrintAndLog("Samples: hf mf dump");\r
PrintAndLog(" hf mf dump 4");\r
+ PrintAndLog(" hf mf dump 4 m");\r
return 0;\r
}\r
- \r
+\r
+ char opts = param_getchar(Cmd, 1);\r
+ bool useBothKeysAlways = false;\r
+ if (opts == 'k' || opts == 'K') useBothKeysAlways = true;\r
+ bool nullMissingKeys = false;\r
+ if (opts == 'm' || opts == 'M') nullMissingKeys = true;\r
+\r
if ((fin = fopen("dumpkeys.bin","rb")) == NULL) {\r
PrintAndLog("Could not find file dumpkeys.bin");\r
return 1;\r
}\r
- \r
- // Read keys A from file\r
- for (sectorNo=0; sectorNo<numSectors; sectorNo++) {\r
- if (fread( keyA[sectorNo], 1, 6, fin ) == 0) {\r
- PrintAndLog("File reading error.");\r
- fclose(fin);\r
- return 2;\r
- }\r
- }\r
- \r
- // Read keys B from file\r
- for (sectorNo=0; sectorNo<numSectors; sectorNo++) {\r
- if (fread( keyB[sectorNo], 1, 6, fin ) == 0) {\r
- PrintAndLog("File reading error.");\r
- fclose(fin);\r
- return 2;\r
+\r
+ // Read keys from file\r
+ for (int group=0; group<=1; group++) {\r
+ for (sectorNo=0; sectorNo<numSectors; sectorNo++) {\r
+ size_t bytes_read = fread(keys[group][sectorNo], 1, 6, fin);\r
+ if (bytes_read != 6) {\r
+ PrintAndLog("File reading error.");\r
+ fclose(fin);\r
+ return 2;\r
+ }\r
}\r
}\r
- \r
+\r
fclose(fin);\r
\r
PrintAndLog("|-----------------------------------------|");\r
PrintAndLog("|------ Reading sector access bits...-----|");\r
PrintAndLog("|-----------------------------------------|");\r
- \r
+ uint8_t tries = 0;\r
for (sectorNo = 0; sectorNo < numSectors; sectorNo++) {\r
- UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + NumBlocksPerSector(sectorNo) - 1, 0, 0}};\r
- memcpy(c.d.asBytes, keyA[sectorNo], 6);\r
- SendCommand(&c);\r
+ for (tries = 0; tries < 3; tries++) {\r
+ UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + NumBlocksPerSector(sectorNo) - 1, 0, 0}};\r
+ // At least the Access Conditions can always be read with key A.\r
+ memcpy(c.d.asBytes, keys[0][sectorNo], 6);\r
+ SendCommand(&c);\r
\r
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
- uint8_t isOK = resp.arg[0] & 0xff;\r
- uint8_t *data = resp.d.asBytes;\r
- if (isOK){\r
- rights[sectorNo][0] = ((data[7] & 0x10)>>2) | ((data[8] & 0x1)<<1) | ((data[8] & 0x10)>>4); // C1C2C3 for data area 0\r
- rights[sectorNo][1] = ((data[7] & 0x20)>>3) | ((data[8] & 0x2)<<0) | ((data[8] & 0x20)>>5); // C1C2C3 for data area 1\r
- rights[sectorNo][2] = ((data[7] & 0x40)>>4) | ((data[8] & 0x4)>>1) | ((data[8] & 0x40)>>6); // C1C2C3 for data area 2\r
- rights[sectorNo][3] = ((data[7] & 0x80)>>5) | ((data[8] & 0x8)>>2) | ((data[8] & 0x80)>>7); // C1C2C3 for sector trailer\r
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ uint8_t isOK = resp.arg[0] & 0xff;\r
+ uint8_t *data = resp.d.asBytes;\r
+ if (isOK){\r
+ rights[sectorNo][0] = ((data[7] & 0x10)>>2) | ((data[8] & 0x1)<<1) | ((data[8] & 0x10)>>4); // C1C2C3 for data area 0\r
+ rights[sectorNo][1] = ((data[7] & 0x20)>>3) | ((data[8] & 0x2)<<0) | ((data[8] & 0x20)>>5); // C1C2C3 for data area 1\r
+ rights[sectorNo][2] = ((data[7] & 0x40)>>4) | ((data[8] & 0x4)>>1) | ((data[8] & 0x40)>>6); // C1C2C3 for data area 2\r
+ rights[sectorNo][3] = ((data[7] & 0x80)>>5) | ((data[8] & 0x8)>>2) | ((data[8] & 0x80)>>7); // C1C2C3 for sector trailer\r
+ break;\r
+ } else if (tries == 2) { // on last try set defaults\r
+ PrintAndLog("Could not get access rights for sector %2d. Trying with defaults...", sectorNo);\r
+ rights[sectorNo][0] = rights[sectorNo][1] = rights[sectorNo][2] = 0x00;\r
+ rights[sectorNo][3] = 0x01;\r
+ }\r
} else {\r
- PrintAndLog("Could not get access rights for sector %2d. Trying with defaults...", sectorNo);\r
+ PrintAndLog("Command execute timeout when trying to read access rights for sector %2d. Trying with defaults...", sectorNo);\r
rights[sectorNo][0] = rights[sectorNo][1] = rights[sectorNo][2] = 0x00;\r
rights[sectorNo][3] = 0x01;\r
}\r
- } else {\r
- PrintAndLog("Command execute timeout when trying to read access rights for sector %2d. Trying with defaults...", sectorNo);\r
- rights[sectorNo][0] = rights[sectorNo][1] = rights[sectorNo][2] = 0x00;\r
- rights[sectorNo][3] = 0x01;\r
}\r
}\r
- \r
+\r
PrintAndLog("|-----------------------------------------|");\r
PrintAndLog("|----- Dumping all blocks to file... -----|");\r
PrintAndLog("|-----------------------------------------|");\r
- \r
+\r
bool isOK = true;\r
for (sectorNo = 0; isOK && sectorNo < numSectors; sectorNo++) {\r
for (blockNo = 0; isOK && blockNo < NumBlocksPerSector(sectorNo); blockNo++) {\r
bool received = false;\r
- \r
- if (blockNo == NumBlocksPerSector(sectorNo) - 1) { // sector trailer. At least the Access Conditions can always be read with key A. \r
- UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + blockNo, 0, 0}};\r
- memcpy(c.d.asBytes, keyA[sectorNo], 6);\r
- SendCommand(&c);\r
- received = WaitForResponseTimeout(CMD_ACK,&resp,1500);\r
- } else { // data block. Check if it can be read with key A or key B\r
- uint8_t data_area = sectorNo<32?blockNo:blockNo/5;\r
- if ((rights[sectorNo][data_area] == 0x03) || (rights[sectorNo][data_area] == 0x05)) { // only key B would work\r
- UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + blockNo, 1, 0}};\r
- memcpy(c.d.asBytes, keyB[sectorNo], 6);\r
- SendCommand(&c);\r
- received = WaitForResponseTimeout(CMD_ACK,&resp,1500);\r
- } else if (rights[sectorNo][data_area] == 0x07) { // no key would work\r
- isOK = false;\r
- PrintAndLog("Access rights do not allow reading of sector %2d block %3d", sectorNo, blockNo);\r
- } else { // key A would work\r
+ for (tries = 0; tries < 3; tries++) {\r
+ if (blockNo == NumBlocksPerSector(sectorNo) - 1) { // sector trailer. At least the Access Conditions can always be read with key A.\r
UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + blockNo, 0, 0}};\r
- memcpy(c.d.asBytes, keyA[sectorNo], 6);\r
+ memcpy(c.d.asBytes, keys[0][sectorNo], 6);\r
SendCommand(&c);\r
received = WaitForResponseTimeout(CMD_ACK,&resp,1500);\r
+ } else if (useBothKeysAlways) {\r
+ // Always try both keys, even if access conditions wouldn't work.\r
+ for (int k=0; k<=1; k++) {\r
+ UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + blockNo, 1, 0}};\r
+ memcpy(c.d.asBytes, keys[k][sectorNo], 6);\r
+ SendCommand(&c);\r
+ received = WaitForResponseTimeout(CMD_ACK,&resp,1500);\r
+\r
+ // Don't try the other one on success.\r
+ if (resp.arg[0] & 0xff) break;\r
+ }\r
+ } else { // data block. Check if it can be read with key A or key B\r
+ uint8_t data_area = sectorNo<32?blockNo:blockNo/5;\r
+ if ((rights[sectorNo][data_area] == 0x03) || (rights[sectorNo][data_area] == 0x05)) { // only key B would work\r
+ UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + blockNo, 1, 0}};\r
+ memcpy(c.d.asBytes, keys[1][sectorNo], 6);\r
+ SendCommand(&c);\r
+ received = WaitForResponseTimeout(CMD_ACK,&resp,1500);\r
+ } else if (rights[sectorNo][data_area] == 0x07) { // no key would work\r
+ PrintAndLog("Access rights do not allow reading of sector %2d block %3d", sectorNo, blockNo);\r
+ if (nullMissingKeys) {\r
+ memset(resp.d.asBytes, 0, 16);\r
+ resp.arg[0] = 1;\r
+ PrintAndLog(" ... filling the block with NULL");\r
+ received = true;\r
+ } else {\r
+ isOK = false;\r
+ tries = 2;\r
+ }\r
+ } else { // key A would work\r
+ UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + blockNo, 0, 0}};\r
+ memcpy(c.d.asBytes, keys[0][sectorNo], 6);\r
+ SendCommand(&c);\r
+ received = WaitForResponseTimeout(CMD_ACK,&resp,1500);\r
+ }\r
+ }\r
+ if (received) {\r
+ isOK = resp.arg[0] & 0xff;\r
+ if (isOK) break;\r
}\r
}\r
\r
if (received) {\r
isOK = resp.arg[0] & 0xff;\r
uint8_t *data = resp.d.asBytes;\r
- if (blockNo == NumBlocksPerSector(sectorNo) - 1) { // sector trailer. Fill in the keys.\r
- data[0] = (keyA[sectorNo][0]);\r
- data[1] = (keyA[sectorNo][1]);\r
- data[2] = (keyA[sectorNo][2]);\r
- data[3] = (keyA[sectorNo][3]);\r
- data[4] = (keyA[sectorNo][4]);\r
- data[5] = (keyA[sectorNo][5]);\r
- data[10] = (keyB[sectorNo][0]);\r
- data[11] = (keyB[sectorNo][1]);\r
- data[12] = (keyB[sectorNo][2]);\r
- data[13] = (keyB[sectorNo][3]);\r
- data[14] = (keyB[sectorNo][4]);\r
- data[15] = (keyB[sectorNo][5]);\r
+ if (blockNo == NumBlocksPerSector(sectorNo) - 1) { // sector trailer. Fill in the keys.\r
+ memcpy(data, keys[0][sectorNo], 6);\r
+ memcpy(data + 10, keys[1][sectorNo], 6);\r
}\r
if (isOK) {\r
memcpy(carddata[FirstBlockOfSector(sectorNo) + blockNo], data, 16);\r
- PrintAndLog("Successfully read block %2d of sector %2d.", blockNo, sectorNo);\r
+ PrintAndLog("Successfully read block %2d of sector %2d.", blockNo, sectorNo);\r
} else {\r
PrintAndLog("Could not read block %2d of sector %2d", blockNo, sectorNo);\r
break;\r
}\r
\r
if (isOK) {\r
- if ((fout = fopen("dumpdata.bin","wb")) == NULL) { \r
+ if ((fout = fopen("dumpdata.bin","wb")) == NULL) {\r
PrintAndLog("Could not create file name dumpdata.bin");\r
return 1;\r
}\r
fclose(fout);\r
PrintAndLog("Dumped %d blocks (%d bytes) to file dumpdata.bin", numblocks, 16*numblocks);\r
}\r
- \r
+\r
return 0;\r
}\r
\r
uint8_t keyA[40][6];\r
uint8_t keyB[40][6];\r
uint8_t numSectors;\r
- \r
+\r
FILE *fdump;\r
FILE *fkeys;\r
\r
char cmdp = param_getchar(Cmd, 0);\r
switch (cmdp) {\r
case '0' : numSectors = 5; break;\r
- case '1' : \r
+ case '1' :\r
case '\0': numSectors = 16; break;\r
case '2' : numSectors = 32; break;\r
case '4' : numSectors = 40; break;\r
default: numSectors = 16;\r
- } \r
+ }\r
\r
if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') {\r
PrintAndLog("Usage: hf mf restore [card memory]");\r
PrintAndLog("Could not find file dumpkeys.bin");\r
return 1;\r
}\r
- \r
+\r
for (sectorNo = 0; sectorNo < numSectors; sectorNo++) {\r
- if (fread(keyA[sectorNo], 1, 6, fkeys) == 0) {\r
+ size_t bytes_read = fread(keyA[sectorNo], 1, 6, fkeys);\r
+ if (bytes_read != 6) {\r
PrintAndLog("File reading error (dumpkeys.bin).");\r
-\r
fclose(fkeys);\r
return 2;\r
}\r
}\r
\r
for (sectorNo = 0; sectorNo < numSectors; sectorNo++) {\r
- if (fread(keyB[sectorNo], 1, 6, fkeys) == 0) {\r
+ size_t bytes_read = fread(keyB[sectorNo], 1, 6, fkeys);\r
+ if (bytes_read != 6) {\r
PrintAndLog("File reading error (dumpkeys.bin).");\r
fclose(fkeys);\r
return 2;\r
if ((fdump = fopen("dumpdata.bin","rb")) == NULL) {\r
PrintAndLog("Could not find file dumpdata.bin");\r
return 1;\r
- } \r
+ }\r
PrintAndLog("Restoring dumpdata.bin to card");\r
\r
for (sectorNo = 0; sectorNo < numSectors; sectorNo++) {\r
for(blockNo = 0; blockNo < NumBlocksPerSector(sectorNo); blockNo++) {\r
UsbCommand c = {CMD_MIFARE_WRITEBL, {FirstBlockOfSector(sectorNo) + blockNo, keyType, 0}};\r
memcpy(c.d.asBytes, key, 6);\r
- \r
- if (fread(bldata, 1, 16, fdump) == 0) {\r
+\r
+ size_t bytes_read = fread(bldata, 1, 16, fdump);\r
+ if (bytes_read != 16) {\r
PrintAndLog("File reading error (dumpdata.bin).");\r
fclose(fdump);\r
return 2;\r
}\r
- \r
- if (blockNo == NumBlocksPerSector(sectorNo) - 1) { // sector trailer\r
+\r
+ if (blockNo == NumBlocksPerSector(sectorNo) - 1) { // sector trailer\r
bldata[0] = (keyA[sectorNo][0]);\r
bldata[1] = (keyA[sectorNo][1]);\r
bldata[2] = (keyA[sectorNo][2]);\r
bldata[13] = (keyB[sectorNo][3]);\r
bldata[14] = (keyB[sectorNo][4]);\r
bldata[15] = (keyB[sectorNo][5]);\r
- } \r
- \r
+ }\r
+\r
PrintAndLog("Writing to block %3d: %s", FirstBlockOfSector(sectorNo) + blockNo, sprint_hex(bldata, 16));\r
- \r
+\r
memcpy(c.d.asBytes + 10, bldata, 16);\r
SendCommand(&c);\r
\r
}\r
}\r
}\r
- \r
+\r
fclose(fdump);\r
return 0;\r
}\r
\r
-int CmdHF14AMfNested(const char *Cmd)\r
-{\r
+//----------------------------------------------\r
+// Nested\r
+//----------------------------------------------\r
+\r
+static void parseParamTDS(const char *Cmd, const uint8_t indx, bool *paramT, bool *paramD, uint16_t *timeout) {\r
+ char ctmp3[4] = {0};\r
+ int len = param_getlength(Cmd, indx);\r
+ if (len > 0 && len < 4){\r
+ param_getstr(Cmd, indx, ctmp3, sizeof(ctmp3));\r
+\r
+ *paramT |= (ctmp3[0] == 't' || ctmp3[0] == 'T');\r
+ *paramD |= (ctmp3[0] == 'd' || ctmp3[0] == 'D');\r
+ bool paramS1 = *paramT || *paramD;\r
+\r
+ // slow and very slow\r
+ if (ctmp3[0] == 's' || ctmp3[0] == 'S' || ctmp3[1] == 's' || ctmp3[1] == 'S') {\r
+ *timeout = MF_CHKKEYS_SLOWTIMEOUT; // slow\r
+\r
+ if (!paramS1 && (ctmp3[1] == 's' || ctmp3[1] == 'S')) {\r
+ *timeout = MF_CHKKEYS_VERYSLOWTIMEOUT; // very slow\r
+ }\r
+ if (paramS1 && (ctmp3[2] == 's' || ctmp3[2] == 'S')) {\r
+ *timeout = MF_CHKKEYS_VERYSLOWTIMEOUT; // very slow\r
+ }\r
+ }\r
+ }\r
+}\r
+\r
+int CmdHF14AMfNested(const char *Cmd) {\r
int i, j, res, iterations;\r
- sector *e_sector = NULL;\r
+ sector_t *e_sector = NULL;\r
uint8_t blockNo = 0;\r
uint8_t keyType = 0;\r
uint8_t trgBlockNo = 0;\r
uint8_t trgKeyType = 0;\r
uint8_t SectorsCnt = 0;\r
uint8_t key[6] = {0, 0, 0, 0, 0, 0};\r
- uint8_t keyBlock[14*6];\r
+ uint8_t keyBlock[MifareDefaultKeysSize * 6];\r
uint64_t key64 = 0;\r
+ // timeout in units. (ms * 106) or us*0.106\r
+ uint16_t timeout14a = MF_CHKKEYS_DEFTIMEOUT; // fast by default\r
+\r
+ bool autosearchKey = false;\r
+\r
bool transferToEml = false;\r
- \r
bool createDumpFile = false;\r
FILE *fkeys;\r
uint8_t standart[6] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};\r
uint8_t tempkey[6] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};\r
- \r
+\r
char cmdp, ctmp;\r
\r
if (strlen(Cmd)<3) {\r
PrintAndLog("Usage:");\r
- PrintAndLog(" all sectors: hf mf nested <card memory> <block number> <key A/B> <key (12 hex symbols)> [t,d]");\r
+ PrintAndLog(" all sectors: hf mf nested <card memory> <block number> <key A/B> <key (12 hex symbols)> [t|d|s|ss]");\r
+ PrintAndLog(" all sectors autosearch key: hf mf nested <card memory> * [t|d|s|ss]");\r
PrintAndLog(" one sector: hf mf nested o <block number> <key A/B> <key (12 hex symbols)>");\r
PrintAndLog(" <target block number> <target key A/B> [t]");\r
+ PrintAndLog(" ");\r
PrintAndLog("card memory - 0 - MINI(320 bytes), 1 - 1K, 2 - 2K, 4 - 4K, <other> - 1K");\r
- PrintAndLog("t - transfer keys into emulator memory");\r
- PrintAndLog("d - write keys to binary file");\r
+ PrintAndLog("t - transfer keys to emulator memory");\r
+ PrintAndLog("d - write keys to binary file dumpkeys.bin");\r
+ PrintAndLog("s - Slow (1ms) check keys (required by some non standard cards)");\r
+ PrintAndLog("ss - Very slow (5ms) check keys");\r
PrintAndLog(" ");\r
PrintAndLog(" sample1: hf mf nested 1 0 A FFFFFFFFFFFF ");\r
PrintAndLog(" sample2: hf mf nested 1 0 A FFFFFFFFFFFF t ");\r
PrintAndLog(" sample3: hf mf nested 1 0 A FFFFFFFFFFFF d ");\r
PrintAndLog(" sample4: hf mf nested o 0 A FFFFFFFFFFFF 4 A");\r
+ PrintAndLog(" sample5: hf mf nested 1 * t");\r
+ PrintAndLog(" sample6: hf mf nested 1 * ss");\r
return 0;\r
- } \r
- \r
- cmdp = param_getchar(Cmd, 0);\r
- blockNo = param_get8(Cmd, 1);\r
- ctmp = param_getchar(Cmd, 2);\r
- \r
- if (ctmp != 'a' && ctmp != 'A' && ctmp != 'b' && ctmp != 'B') {\r
- PrintAndLog("Key type must be A or B");\r
- return 1;\r
- }\r
- \r
- if (ctmp != 'A' && ctmp != 'a') \r
- keyType = 1;\r
- \r
- if (param_gethex(Cmd, 3, key, 12)) {\r
- PrintAndLog("Key must include 12 HEX symbols");\r
- return 1;\r
}\r
- \r
+\r
+ // <card memory>\r
+ cmdp = param_getchar(Cmd, 0);\r
if (cmdp == 'o' || cmdp == 'O') {\r
cmdp = 'o';\r
- trgBlockNo = param_get8(Cmd, 4);\r
- ctmp = param_getchar(Cmd, 5);\r
+ SectorsCnt = 1;\r
+ } else {\r
+ SectorsCnt = ParamCardSizeSectors(cmdp);\r
+ }\r
+\r
+ // <block number>. number or autosearch key (*)\r
+ if (param_getchar(Cmd, 1) == '*') {\r
+ autosearchKey = true;\r
+\r
+ parseParamTDS(Cmd, 2, &transferToEml, &createDumpFile, &timeout14a);\r
+\r
+ PrintAndLog("--nested. sectors:%2d, block no:*, eml:%c, dmp=%c checktimeout=%d us",\r
+ SectorsCnt, transferToEml?'y':'n', createDumpFile?'y':'n', ((uint32_t)timeout14a * 1000) / 106);\r
+ } else {\r
+ blockNo = param_get8(Cmd, 1);\r
+\r
+ ctmp = param_getchar(Cmd, 2);\r
if (ctmp != 'a' && ctmp != 'A' && ctmp != 'b' && ctmp != 'B') {\r
- PrintAndLog("Target key type must be A or B");\r
+ PrintAndLog("Key type must be A or B");\r
return 1;\r
}\r
- if (ctmp != 'A' && ctmp != 'a') \r
- trgKeyType = 1;\r
- } else {\r
- \r
- switch (cmdp) {\r
- case '0': SectorsCnt = 05; break;\r
- case '1': SectorsCnt = 16; break;\r
- case '2': SectorsCnt = 32; break;\r
- case '4': SectorsCnt = 40; break;\r
- default: SectorsCnt = 16;\r
- }\r
- }\r
-\r
- ctmp = param_getchar(Cmd, 4);\r
- if (ctmp == 't' || ctmp == 'T') transferToEml = true;\r
- else if (ctmp == 'd' || ctmp == 'D') createDumpFile = true;\r
- \r
- ctmp = param_getchar(Cmd, 6);\r
- transferToEml |= (ctmp == 't' || ctmp == 'T');\r
- transferToEml |= (ctmp == 'd' || ctmp == 'D');\r
- \r
- if (cmdp == 'o') {\r
+\r
+ if (ctmp != 'A' && ctmp != 'a')\r
+ keyType = 1;\r
+\r
+ if (param_gethex(Cmd, 3, key, 12)) {\r
+ PrintAndLog("Key must include 12 HEX symbols");\r
+ return 1;\r
+ }\r
+\r
+ // check if we can authenticate to sector\r
+ res = mfCheckKeys(blockNo, keyType, timeout14a, true, 1, key, &key64);\r
+ if (res) {\r
+ PrintAndLog("Can't authenticate to block:%3d key type:%c key:%s", blockNo, keyType?'B':'A', sprint_hex(key, 6));\r
+ return 3;\r
+ }\r
+\r
+ // one sector nested\r
+ if (cmdp == 'o') {\r
+ trgBlockNo = param_get8(Cmd, 4);\r
+\r
+ ctmp = param_getchar(Cmd, 5);\r
+ if (ctmp != 'a' && ctmp != 'A' && ctmp != 'b' && ctmp != 'B') {\r
+ PrintAndLog("Target key type must be A or B");\r
+ return 1;\r
+ }\r
+ if (ctmp != 'A' && ctmp != 'a')\r
+ trgKeyType = 1;\r
+\r
+ parseParamTDS(Cmd, 6, &transferToEml, &createDumpFile, &timeout14a);\r
+ } else {\r
+ parseParamTDS(Cmd, 4, &transferToEml, &createDumpFile, &timeout14a);\r
+ }\r
+\r
+ PrintAndLog("--nested. sectors:%2d, block no:%3d, key type:%c, eml:%c, dmp=%c checktimeout=%d us",\r
+ SectorsCnt, blockNo, keyType?'B':'A', transferToEml?'y':'n', createDumpFile?'y':'n', ((uint32_t)timeout14a * 1000) / 106);\r
+ }\r
+\r
+ // one-sector nested\r
+ if (cmdp == 'o') { // ------------------------------------ one sector working\r
PrintAndLog("--target block no:%3d, target key type:%c ", trgBlockNo, trgKeyType?'B':'A');\r
- int16_t isOK = mfnested(blockNo, keyType, key, trgBlockNo, trgKeyType, keyBlock, true);\r
- if (isOK) {\r
+ int16_t isOK = mfnested(blockNo, keyType, timeout14a, key, trgBlockNo, trgKeyType, keyBlock, true);\r
+ if (isOK < 0) {\r
switch (isOK) {\r
case -1 : PrintAndLog("Error: No response from Proxmark.\n"); break;\r
case -2 : PrintAndLog("Button pressed. Aborted.\n"); break;\r
case -3 : PrintAndLog("Tag isn't vulnerable to Nested Attack (random numbers are not predictable).\n"); break;\r
- default : PrintAndLog("Unknown Error.\n");\r
+ default : PrintAndLog("Unknown Error (%d)\n", isOK);\r
}\r
return 2;\r
}\r
key64 = bytes_to_num(keyBlock, 6);\r
- if (key64) {\r
- PrintAndLog("Found valid key:%012"llx, key64);\r
+ if (!isOK) {\r
+ PrintAndLog("Found valid key:%012" PRIx64, key64);\r
\r
// transfer key to the emulator\r
if (transferToEml) {\r
uint8_t sectortrailer;\r
- if (trgBlockNo < 32*4) { // 4 block sector\r
- sectortrailer = (trgBlockNo & 0x03) + 3;\r
- } else { // 16 block sector\r
- sectortrailer = (trgBlockNo & 0x0f) + 15;\r
+ if (trgBlockNo < 32*4) { // 4 block sector\r
+ sectortrailer = trgBlockNo | 0x03;\r
+ } else { // 16 block sector\r
+ sectortrailer = trgBlockNo | 0x0f;\r
}\r
mfEmlGetMem(keyBlock, sectortrailer, 1);\r
- \r
+\r
if (!trgKeyType)\r
num_to_bytes(key64, 6, keyBlock);\r
else\r
num_to_bytes(key64, 6, &keyBlock[10]);\r
- mfEmlSetMem(keyBlock, sectortrailer, 1); \r
+ mfEmlSetMem(keyBlock, sectortrailer, 1);\r
+ PrintAndLog("Key transferred to emulator memory.");\r
}\r
} else {\r
PrintAndLog("No valid key found");\r
}\r
}\r
else { // ------------------------------------ multiple sectors working\r
- clock_t time1;\r
- time1 = clock();\r
+ uint64_t msclock1;\r
+ msclock1 = msclock();\r
\r
- e_sector = calloc(SectorsCnt, sizeof(sector));\r
+ e_sector = calloc(SectorsCnt, sizeof(sector_t));\r
if (e_sector == NULL) return 1;\r
- \r
+\r
//test current key and additional standard keys first\r
- memcpy(keyBlock, key, 6);\r
- num_to_bytes(0xffffffffffff, 6, (uint8_t*)(keyBlock + 1 * 6));\r
- num_to_bytes(0x000000000000, 6, (uint8_t*)(keyBlock + 2 * 6));\r
- num_to_bytes(0xa0a1a2a3a4a5, 6, (uint8_t*)(keyBlock + 3 * 6));\r
- num_to_bytes(0xb0b1b2b3b4b5, 6, (uint8_t*)(keyBlock + 4 * 6));\r
- num_to_bytes(0xaabbccddeeff, 6, (uint8_t*)(keyBlock + 5 * 6));\r
- num_to_bytes(0x4d3a99c351dd, 6, (uint8_t*)(keyBlock + 6 * 6));\r
- num_to_bytes(0x1a982c7e459a, 6, (uint8_t*)(keyBlock + 7 * 6));\r
- num_to_bytes(0xd3f7d3f7d3f7, 6, (uint8_t*)(keyBlock + 8 * 6));\r
- num_to_bytes(0x714c5c886e97, 6, (uint8_t*)(keyBlock + 9 * 6));\r
- num_to_bytes(0x587ee5f9350f, 6, (uint8_t*)(keyBlock + 10 * 6));\r
- num_to_bytes(0xa0478cc39091, 6, (uint8_t*)(keyBlock + 11 * 6));\r
- num_to_bytes(0x533cb6c723f6, 6, (uint8_t*)(keyBlock + 12 * 6));\r
- num_to_bytes(0x8fd0a4f256e9, 6, (uint8_t*)(keyBlock + 13 * 6));\r
+ for (int defaultKeyCounter = 0; defaultKeyCounter < MifareDefaultKeysSize; defaultKeyCounter++){\r
+ num_to_bytes(MifareDefaultKeys[defaultKeyCounter], 6, (uint8_t*)(keyBlock + defaultKeyCounter * 6));\r
+ }\r
\r
PrintAndLog("Testing known keys. Sector count=%d", SectorsCnt);\r
- for (i = 0; i < SectorsCnt; i++) {\r
- for (j = 0; j < 2; j++) {\r
- if (e_sector[i].foundKey[j]) continue;\r
- \r
- res = mfCheckKeys(FirstBlockOfSector(i), j, true, 6, keyBlock, &key64);\r
- \r
- if (!res) {\r
- e_sector[i].Key[j] = key64;\r
- e_sector[i].foundKey[j] = 1;\r
+ mfCheckKeysSec(SectorsCnt, 2, timeout14a, true, true, true, MifareDefaultKeysSize, keyBlock, e_sector);\r
+\r
+ // get known key from array\r
+ bool keyFound = false;\r
+ if (autosearchKey) {\r
+ for (i = 0; i < SectorsCnt; i++) {\r
+ for (j = 0; j < 2; j++) {\r
+ if (e_sector[i].foundKey[j]) {\r
+ // get known key\r
+ blockNo = i * 4;\r
+ keyType = j;\r
+ num_to_bytes(e_sector[i].Key[j], 6, key);\r
+ keyFound = true;\r
+ break;\r
+ }\r
}\r
+ if (keyFound) break;\r
}\r
+\r
+ // Can't found a key....\r
+ if (!keyFound) {\r
+ PrintAndLog("Can't found any of the known keys.");\r
+ free(e_sector);\r
+ return 4;\r
+ }\r
+ PrintAndLog("--auto key. block no:%3d, key type:%c key:%s", blockNo, keyType?'B':'A', sprint_hex(key, 6));\r
}\r
- \r
+\r
// nested sectors\r
iterations = 0;\r
PrintAndLog("nested...");\r
bool calibrate = true;\r
for (i = 0; i < NESTED_SECTOR_RETRY; i++) {\r
for (uint8_t sectorNo = 0; sectorNo < SectorsCnt; sectorNo++) {\r
- for (trgKeyType = 0; trgKeyType < 2; trgKeyType++) { \r
+ for (trgKeyType = 0; trgKeyType < 2; trgKeyType++) {\r
if (e_sector[sectorNo].foundKey[trgKeyType]) continue;\r
PrintAndLog("-----------------------------------------------");\r
- int16_t isOK = mfnested(blockNo, keyType, key, FirstBlockOfSector(sectorNo), trgKeyType, keyBlock, calibrate);\r
- if(isOK) {\r
+ int16_t isOK = mfnested(blockNo, keyType, timeout14a, key, FirstBlockOfSector(sectorNo), trgKeyType, keyBlock, calibrate);\r
+ if(isOK < 0) {\r
switch (isOK) {\r
case -1 : PrintAndLog("Error: No response from Proxmark.\n"); break;\r
case -2 : PrintAndLog("Button pressed. Aborted.\n"); break;\r
case -3 : PrintAndLog("Tag isn't vulnerable to Nested Attack (random numbers are not predictable).\n"); break;\r
- default : PrintAndLog("Unknown Error.\n");\r
+ default : PrintAndLog("Unknown Error (%d)\n", isOK);\r
}\r
free(e_sector);\r
return 2;\r
} else {\r
calibrate = false;\r
}\r
- \r
+\r
iterations++;\r
\r
key64 = bytes_to_num(keyBlock, 6);\r
- if (key64) {\r
- PrintAndLog("Found valid key:%012"llx, key64);\r
+ if (!isOK) {\r
+ PrintAndLog("Found valid key:%012" PRIx64, key64);\r
e_sector[sectorNo].foundKey[trgKeyType] = 1;\r
e_sector[sectorNo].Key[trgKeyType] = key64;\r
+\r
+ // try to check this key as a key to the other sectors\r
+ mfCheckKeysSec(SectorsCnt, 2, timeout14a, true, true, true, 1, keyBlock, e_sector);\r
}\r
}\r
}\r
}\r
\r
- printf("Time in nested: %1.3f (%1.3f sec per key)\n\n", ((float)clock() - time1)/CLOCKS_PER_SEC, ((float)clock() - time1)/iterations/CLOCKS_PER_SEC);\r
- \r
- PrintAndLog("-----------------------------------------------\nIterations count: %d\n\n", iterations);\r
- //print them\r
+ // print nested statistic\r
+ PrintAndLog("\n\n-----------------------------------------------\nNested statistic:\nIterations count: %d", iterations);\r
+ PrintAndLog("Time in nested: %1.3f (%1.3f sec per key)", ((float)(msclock() - msclock1))/1000.0, ((float)(msclock() - msclock1))/iterations/1000.0);\r
+\r
+ // print result\r
PrintAndLog("|---|----------------|---|----------------|---|");\r
PrintAndLog("|sec|key A |res|key B |res|");\r
PrintAndLog("|---|----------------|---|----------------|---|");\r
for (i = 0; i < SectorsCnt; i++) {\r
- PrintAndLog("|%03d| %012"llx" | %d | %012"llx" | %d |", i,\r
+ PrintAndLog("|%03d| %012" PRIx64 " | %d | %012" PRIx64 " | %d |", i,\r
e_sector[i].Key[0], e_sector[i].foundKey[0], e_sector[i].Key[1], e_sector[i].foundKey[1]);\r
}\r
PrintAndLog("|---|----------------|---|----------------|---|");\r
- \r
- // transfer them to the emulator\r
+\r
+ // transfer keys to the emulator memory\r
if (transferToEml) {\r
for (i = 0; i < SectorsCnt; i++) {\r
mfEmlGetMem(keyBlock, FirstBlockOfSector(i) + NumBlocksPerSector(i) - 1, 1);\r
if (e_sector[i].foundKey[1])\r
num_to_bytes(e_sector[i].Key[1], 6, &keyBlock[10]);\r
mfEmlSetMem(keyBlock, FirstBlockOfSector(i) + NumBlocksPerSector(i) - 1, 1);\r
- } \r
+ }\r
+ PrintAndLog("Keys transferred to emulator memory.");\r
}\r
- \r
+\r
// Create dump file\r
if (createDumpFile) {\r
- if ((fkeys = fopen("dumpkeys.bin","wb")) == NULL) { \r
+ if ((fkeys = fopen("dumpkeys.bin","wb")) == NULL) {\r
PrintAndLog("Could not create file dumpkeys.bin");\r
free(e_sector);\r
return 1;\r
}\r
fclose(fkeys);\r
}\r
- \r
+\r
free(e_sector);\r
}\r
return 0;\r
}\r
\r
-int CmdHF14AMfChk(const char *Cmd)\r
+\r
+int CmdHF14AMfNestedHard(const char *Cmd)\r
{\r
+ uint8_t blockNo = 0;\r
+ uint8_t keyType = 0;\r
+ uint8_t trgBlockNo = 0;\r
+ uint8_t trgKeyType = 0;\r
+ uint8_t key[6] = {0, 0, 0, 0, 0, 0};\r
+ uint8_t trgkey[6] = {0, 0, 0, 0, 0, 0};\r
+\r
+ char ctmp;\r
+ ctmp = param_getchar(Cmd, 0);\r
+\r
+ if (ctmp != 'R' && ctmp != 'r' && ctmp != 'T' && ctmp != 't' && strlen(Cmd) < 20) {\r
+ PrintAndLog("Usage:");\r
+ PrintAndLog(" hf mf hardnested <block number> <key A|B> <key (12 hex symbols)>");\r
+ PrintAndLog(" <target block number> <target key A|B> [known target key (12 hex symbols)] [w] [s]");\r
+ PrintAndLog(" or hf mf hardnested r [known target key]");\r
+ PrintAndLog(" ");\r
+ PrintAndLog("Options: ");\r
+ PrintAndLog(" w: Acquire nonces and write them to binary file nonces.bin");\r
+ PrintAndLog(" s: Slower acquisition (required by some non standard cards)");\r
+ PrintAndLog(" r: Read nonces.bin and start attack");\r
+ PrintAndLog(" iX: set type of SIMD instructions. Without this flag programs autodetect it.");\r
+ PrintAndLog(" i5: AVX512");\r
+ PrintAndLog(" i2: AVX2");\r
+ PrintAndLog(" ia: AVX");\r
+ PrintAndLog(" is: SSE2");\r
+ PrintAndLog(" im: MMX");\r
+ PrintAndLog(" in: none (use CPU regular instruction set)");\r
+ PrintAndLog(" ");\r
+ PrintAndLog(" sample1: hf mf hardnested 0 A FFFFFFFFFFFF 4 A");\r
+ PrintAndLog(" sample2: hf mf hardnested 0 A FFFFFFFFFFFF 4 A w");\r
+ PrintAndLog(" sample3: hf mf hardnested 0 A FFFFFFFFFFFF 4 A w s");\r
+ PrintAndLog(" sample4: hf mf hardnested r");\r
+ PrintAndLog(" ");\r
+ PrintAndLog("Add the known target key to check if it is present in the remaining key space:");\r
+ PrintAndLog(" sample5: hf mf hardnested 0 A A0A1A2A3A4A5 4 A FFFFFFFFFFFF");\r
+ return 0;\r
+ }\r
+\r
+ bool know_target_key = false;\r
+ bool nonce_file_read = false;\r
+ bool nonce_file_write = false;\r
+ bool slow = false;\r
+ int tests = 0;\r
+\r
+\r
+ uint16_t iindx = 0;\r
+ if (ctmp == 'R' || ctmp == 'r') {\r
+ nonce_file_read = true;\r
+ iindx = 1;\r
+ if (!param_gethex(Cmd, 1, trgkey, 12)) {\r
+ know_target_key = true;\r
+ iindx = 2;\r
+ }\r
+ } else if (ctmp == 'T' || ctmp == 't') {\r
+ tests = param_get32ex(Cmd, 1, 100, 10);\r
+ iindx = 2;\r
+ if (!param_gethex(Cmd, 2, trgkey, 12)) {\r
+ know_target_key = true;\r
+ iindx = 3;\r
+ }\r
+ } else {\r
+ blockNo = param_get8(Cmd, 0);\r
+ ctmp = param_getchar(Cmd, 1);\r
+ if (ctmp != 'a' && ctmp != 'A' && ctmp != 'b' && ctmp != 'B') {\r
+ PrintAndLog("Key type must be A or B");\r
+ return 1;\r
+ }\r
+ if (ctmp != 'A' && ctmp != 'a') {\r
+ keyType = 1;\r
+ }\r
+\r
+ if (param_gethex(Cmd, 2, key, 12)) {\r
+ PrintAndLog("Key must include 12 HEX symbols");\r
+ return 1;\r
+ }\r
+\r
+ trgBlockNo = param_get8(Cmd, 3);\r
+ ctmp = param_getchar(Cmd, 4);\r
+ if (ctmp != 'a' && ctmp != 'A' && ctmp != 'b' && ctmp != 'B') {\r
+ PrintAndLog("Target key type must be A or B");\r
+ return 1;\r
+ }\r
+ if (ctmp != 'A' && ctmp != 'a') {\r
+ trgKeyType = 1;\r
+ }\r
+\r
+ uint16_t i = 5;\r
+\r
+ if (!param_gethex(Cmd, 5, trgkey, 12)) {\r
+ know_target_key = true;\r
+ i++;\r
+ }\r
+ iindx = i;\r
+\r
+ while ((ctmp = param_getchar(Cmd, i))) {\r
+ if (ctmp == 's' || ctmp == 'S') {\r
+ slow = true;\r
+ } else if (ctmp == 'w' || ctmp == 'W') {\r
+ nonce_file_write = true;\r
+ } else if (param_getlength(Cmd, i) == 2 && ctmp == 'i') {\r
+ iindx = i;\r
+ } else {\r
+ PrintAndLog("Possible options are w , s and/or iX");\r
+ return 1;\r
+ }\r
+ i++;\r
+ }\r
+ }\r
+\r
+ SetSIMDInstr(SIMD_AUTO);\r
+ if (iindx > 0) {\r
+ while ((ctmp = param_getchar(Cmd, iindx))) {\r
+ if (param_getlength(Cmd, iindx) == 2 && ctmp == 'i') {\r
+ switch(param_getchar_indx(Cmd, 1, iindx)) {\r
+ case '5':\r
+ SetSIMDInstr(SIMD_AVX512);\r
+ break;\r
+ case '2':\r
+ SetSIMDInstr(SIMD_AVX2);\r
+ break;\r
+ case 'a':\r
+ SetSIMDInstr(SIMD_AVX);\r
+ break;\r
+ case 's':\r
+ SetSIMDInstr(SIMD_SSE2);\r
+ break;\r
+ case 'm':\r
+ SetSIMDInstr(SIMD_MMX);\r
+ break;\r
+ case 'n':\r
+ SetSIMDInstr(SIMD_NONE);\r
+ break;\r
+ default:\r
+ PrintAndLog("Unknown SIMD type. %c", param_getchar_indx(Cmd, 1, iindx));\r
+ return 1;\r
+ }\r
+ }\r
+ iindx++;\r
+ }\r
+ }\r
+\r
+ PrintAndLog("--target block no:%3d, target key type:%c, known target key: 0x%02x%02x%02x%02x%02x%02x%s, file action: %s, Slow: %s, Tests: %d ",\r
+ trgBlockNo,\r
+ trgKeyType?'B':'A',\r
+ trgkey[0], trgkey[1], trgkey[2], trgkey[3], trgkey[4], trgkey[5],\r
+ know_target_key?"":" (not set)",\r
+ nonce_file_write?"write":nonce_file_read?"read":"none",\r
+ slow?"Yes":"No",\r
+ tests);\r
+\r
+ int16_t isOK = mfnestedhard(blockNo, keyType, key, trgBlockNo, trgKeyType, know_target_key?trgkey:NULL, nonce_file_read, nonce_file_write, slow, tests);\r
+\r
+ if (isOK) {\r
+ switch (isOK) {\r
+ case 1 : PrintAndLog("Error: No response from Proxmark.\n"); break;\r
+ case 2 : PrintAndLog("Button pressed. Aborted.\n"); break;\r
+ default : break;\r
+ }\r
+ return 2;\r
+ }\r
+\r
+ return 0;\r
+}\r
+\r
+\r
+int CmdHF14AMfChk(const char *Cmd) {\r
+\r
if (strlen(Cmd)<3) {\r
- PrintAndLog("Usage: hf mf chk <block number>|<*card memory> <key type (A/B/?)> [t|d] [<key (12 hex symbols)>] [<dic (*.dic)>]");\r
+ PrintAndLog("Usage: hf mf chk <block number>|<*card memory> <key type (A/B/?)> [t|d|s|ss] [<key (12 hex symbols)>] [<dic (*.dic)>]");\r
PrintAndLog(" * - all sectors");\r
PrintAndLog("card memory - 0 - MINI(320 bytes), 1 - 1K, 2 - 2K, 4 - 4K, <other> - 1K");\r
- PrintAndLog("d - write keys to binary file\n");\r
- PrintAndLog("t - write keys to emulator memory");\r
+ PrintAndLog("d - write keys to binary file (not used when <block number> supplied)");\r
+ PrintAndLog("t - write keys to emulator memory");\r
+ PrintAndLog("s - slow execute. timeout 1ms");\r
+ PrintAndLog("ss - very slow execute. timeout 5ms");\r
PrintAndLog(" sample: hf mf chk 0 A 1234567890ab keys.dic");\r
PrintAndLog(" hf mf chk *1 ? t");\r
PrintAndLog(" hf mf chk *1 ? d");\r
+ PrintAndLog(" hf mf chk *1 ? s");\r
+ PrintAndLog(" hf mf chk *1 ? dss");\r
return 0;\r
- } \r
+ }\r
\r
- FILE * f;\r
- char filename[FILE_PATH_SIZE]={0};\r
- char buf[13];\r
- uint8_t *keyBlock = NULL, *p;\r
- uint8_t stKeyBlock = 20;\r
- \r
- int i, res;\r
- int keycnt = 0;\r
- char ctmp = 0x00;\r
- uint8_t blockNo = 0;\r
- uint8_t SectorsCnt = 1;\r
- uint8_t keyType = 0;\r
- uint64_t key64 = 0;\r
- \r
- int transferToEml = 0;\r
- int createDumpFile = 0;\r
+ FILE * f;\r
+ char filename[FILE_PATH_SIZE]={0};\r
+ char buf[13];\r
+ uint8_t *keyBlock = NULL, *p;\r
+ uint16_t stKeyBlock = 20;\r
+ int i, res;\r
+ int keycnt = 0;\r
+ char ctmp = 0x00;\r
+ int clen = 0;\r
+ uint8_t blockNo = 0;\r
+ uint8_t SectorsCnt = 0;\r
+ uint8_t keyType = 0;\r
+ uint64_t key64 = 0;\r
+ // timeout in units. (ms * 106)/10 or us*0.0106\r
+ uint16_t timeout14a = MF_CHKKEYS_DEFTIMEOUT; // fast by default\r
+ bool param3InUse = false;\r
+ bool transferToEml = 0;\r
+ bool createDumpFile = 0;\r
+ bool singleBlock = false; // Flag to ID if a single or multi key check\r
+ uint8_t keyFoundCount = 0; // Counter to display the number of keys found/transfered to emulator\r
+\r
+ sector_t *e_sector = NULL;\r
\r
keyBlock = calloc(stKeyBlock, 6);\r
if (keyBlock == NULL) return 1;\r
\r
- uint64_t defaultKeys[] =\r
- {\r
- 0xffffffffffff, // Default key (first key used by program if no user defined key)\r
- 0x000000000000, // Blank key\r
- 0xa0a1a2a3a4a5, // NFCForum MAD key\r
- 0xb0b1b2b3b4b5,\r
- 0xaabbccddeeff,\r
- 0x4d3a99c351dd,\r
- 0x1a982c7e459a,\r
- 0xd3f7d3f7d3f7,\r
- 0x714c5c886e97,\r
- 0x587ee5f9350f,\r
- 0xa0478cc39091,\r
- 0x533cb6c723f6,\r
- 0x8fd0a4f256e9\r
- };\r
- int defaultKeysSize = sizeof(defaultKeys) / sizeof(uint64_t);\r
-\r
- for (int defaultKeyCounter = 0; defaultKeyCounter < defaultKeysSize; defaultKeyCounter++)\r
- {\r
- num_to_bytes(defaultKeys[defaultKeyCounter], 6, (uint8_t*)(keyBlock + defaultKeyCounter * 6));\r
+ int defaultKeysSize = MifareDefaultKeysSize;\r
+ for (int defaultKeyCounter = 0; defaultKeyCounter < defaultKeysSize; defaultKeyCounter++){\r
+ num_to_bytes(MifareDefaultKeys[defaultKeyCounter], 6, (uint8_t*)(keyBlock + defaultKeyCounter * 6));\r
}\r
- \r
+\r
if (param_getchar(Cmd, 0)=='*') {\r
- blockNo = 3;\r
- switch(param_getchar(Cmd+1, 0)) {\r
- case '0': SectorsCnt = 5; break;\r
- case '1': SectorsCnt = 16; break;\r
- case '2': SectorsCnt = 32; break;\r
- case '4': SectorsCnt = 40; break;\r
- default: SectorsCnt = 16;\r
+ SectorsCnt = ParamCardSizeSectors(param_getchar(Cmd + 1, 0));\r
+ } else { \r
+ blockNo = param_get8(Cmd, 0);\r
+ // Singe Key check, so Set Sector count to cover sectors (1 to sector that contains the block)\r
+ // 1 and 2 Cards : Sector = blockNo/4 + 1\r
+ // Sectors 0 - 31 : 4 blocks per sector : Blocks 0 - 127\r
+ // Sectors 32 - 39 : 16 blocks per sector : Blocks 128 - 255 (4K)\r
+ if (blockNo < 128) {\r
+ SectorsCnt = (blockNo / 4) + 1;\r
+ } else {\r
+ SectorsCnt = 32 + ((blockNo-128)/16) + 1;\r
}\r
+ singleBlock = true; // Set flag for single key check\r
}\r
- else\r
- blockNo = param_get8(Cmd, 0);\r
- \r
+\r
ctmp = param_getchar(Cmd, 1);\r
- switch (ctmp) { \r
- case 'a': case 'A':\r
- keyType = !0;\r
- break;\r
- case 'b': case 'B':\r
- keyType = !1;\r
- break;\r
- case '?':\r
- keyType = 2;\r
- break;\r
- default:\r
- PrintAndLog("Key type must be A , B or ?");\r
+ clen = param_getlength(Cmd, 1);\r
+ if (clen == 1) {\r
+ switch (ctmp) {\r
+ case 'a': case 'A':\r
+ keyType = 0;\r
+ break;\r
+ case 'b': case 'B':\r
+ keyType = 1;\r
+ break;\r
+ case '?':\r
+ keyType = 2;\r
+ break;\r
+ default:\r
+ PrintAndLog("Key type must be A , B or ?");\r
+ free(keyBlock);\r
+ return 1;\r
+ };\r
+ }\r
+\r
+ parseParamTDS(Cmd, 2, &transferToEml, &createDumpFile, &timeout14a);\r
+\r
+ if (singleBlock & createDumpFile) {\r
+ PrintAndLog (" block key check (<block no>) and write to dump file (d) combination is not supported ");\r
+ PrintAndLog (" please remove option d and try again");\r
return 1;\r
- };\r
- \r
- ctmp = param_getchar(Cmd, 2);\r
- if (ctmp == 't' || ctmp == 'T') transferToEml = 1;\r
- else if (ctmp == 'd' || ctmp == 'D') createDumpFile = 1;\r
- \r
- for (i = transferToEml || createDumpFile; param_getchar(Cmd, 2 + i); i++) {\r
+ }\r
+\r
+ param3InUse = transferToEml | createDumpFile | (timeout14a != MF_CHKKEYS_DEFTIMEOUT);\r
+\r
+ PrintAndLog("--chk keys. sectors:%2d, block no:%3d, key type:%c, eml:%c, dmp=%c checktimeout=%d us",\r
+ SectorsCnt, blockNo, keyType==0?'A':keyType==1?'B':'?', transferToEml?'y':'n', createDumpFile?'y':'n', ((uint32_t)timeout14a * 1000) / 106);\r
+\r
+ for (i = param3InUse; param_getchar(Cmd, 2 + i); i++) {\r
if (!param_gethex(Cmd, 2 + i, keyBlock + 6 * keycnt, 12)) {\r
if ( stKeyBlock - keycnt < 2) {\r
p = realloc(keyBlock, 6*(stKeyBlock+=10));\r
keyBlock = p;\r
}\r
PrintAndLog("chk key[%2d] %02x%02x%02x%02x%02x%02x", keycnt,\r
- (keyBlock + 6*keycnt)[0],(keyBlock + 6*keycnt)[1], (keyBlock + 6*keycnt)[2],\r
- (keyBlock + 6*keycnt)[3], (keyBlock + 6*keycnt)[4], (keyBlock + 6*keycnt)[5], 6);\r
+ (keyBlock + 6*keycnt)[0], (keyBlock + 6*keycnt)[1], (keyBlock + 6*keycnt)[2],\r
+ (keyBlock + 6*keycnt)[3], (keyBlock + 6*keycnt)[4], (keyBlock + 6*keycnt)[5], 6);\r
keycnt++;\r
} else {\r
// May be a dic file\r
- if ( param_getstr(Cmd, 2 + i,filename) >= FILE_PATH_SIZE ) {\r
+ if ( param_getstr(Cmd, 2 + i, filename, sizeof(filename)) >= FILE_PATH_SIZE ) {\r
PrintAndLog("File name too long");\r
free(keyBlock);\r
return 2;\r
}\r
- \r
- if ( (f = fopen( filename , "r")) ) {\r
- while( fgets(buf, sizeof(buf), f) ){\r
+\r
+ if ((f = fopen( filename , "r"))) {\r
+ while (fgets(buf, sizeof(buf), f)) {\r
if (strlen(buf) < 12 || buf[11] == '\n')\r
continue;\r
- \r
+\r
while (fgetc(f) != '\n' && !feof(f)) ; //goto next line\r
- \r
- if( buf[0]=='#' ) continue; //The line start with # is comment, skip\r
\r
- if (!isxdigit(buf[0])){\r
- PrintAndLog("File content error. '%s' must include 12 HEX symbols",buf);\r
+ if( buf[0]=='#' ) continue; //The line start with # is comment, skip\r
+\r
+ bool content_error = false;\r
+ for (int i = 0; i < 12; i++) {\r
+ if (!isxdigit((unsigned char)buf[i])) {\r
+ content_error = true;\r
+ }\r
+ }\r
+ if (content_error) {\r
+ PrintAndLog("File content error. '%s' must include 12 HEX symbols", buf);\r
continue;\r
}\r
- \r
+\r
buf[12] = 0;\r
\r
- if ( stKeyBlock - keycnt < 2) {\r
+ if (stKeyBlock - keycnt < 2) {\r
p = realloc(keyBlock, 6*(stKeyBlock+=10));\r
if (!p) {\r
PrintAndLog("Cannot allocate memory for defKeys");\r
free(keyBlock);\r
+ fclose(f);\r
return 2;\r
}\r
keyBlock = p;\r
}\r
memset(keyBlock + 6 * keycnt, 0, 6);\r
num_to_bytes(strtoll(buf, NULL, 16), 6, keyBlock + 6*keycnt);\r
- PrintAndLog("chk custom key[%2d] %012"llx, keycnt, bytes_to_num(keyBlock + 6*keycnt, 6));\r
+ PrintAndLog("chk custom key[%2d] %012" PRIx64 , keycnt, bytes_to_num(keyBlock + 6*keycnt, 6));\r
keycnt++;\r
memset(buf, 0, sizeof(buf));\r
}\r
PrintAndLog("File: %s: not found or locked.", filename);\r
free(keyBlock);\r
return 1;\r
- \r
}\r
}\r
}\r
- \r
+\r
+ // fill with default keys\r
if (keycnt == 0) {\r
PrintAndLog("No key specified, trying default keys");\r
for (;keycnt < defaultKeysSize; keycnt++)\r
PrintAndLog("chk default key[%2d] %02x%02x%02x%02x%02x%02x", keycnt,\r
- (keyBlock + 6*keycnt)[0],(keyBlock + 6*keycnt)[1], (keyBlock + 6*keycnt)[2],\r
- (keyBlock + 6*keycnt)[3], (keyBlock + 6*keycnt)[4], (keyBlock + 6*keycnt)[5], 6);\r
+ (keyBlock + 6*keycnt)[0], (keyBlock + 6*keycnt)[1], (keyBlock + 6*keycnt)[2],\r
+ (keyBlock + 6*keycnt)[3], (keyBlock + 6*keycnt)[4], (keyBlock + 6*keycnt)[5], 6);\r
}\r
- \r
+\r
// initialize storage for found keys\r
- bool validKey[2][40];\r
- uint8_t foundKey[2][40][6];\r
- for (uint16_t t = 0; t < 2; t++) {\r
+ e_sector = calloc(SectorsCnt, sizeof(sector_t));\r
+ if (e_sector == NULL) {\r
+ free(keyBlock);\r
+ return 1;\r
+ }\r
+ for (uint8_t keyAB = 0; keyAB < 2; keyAB++) {\r
for (uint16_t sectorNo = 0; sectorNo < SectorsCnt; sectorNo++) {\r
- validKey[t][sectorNo] = false;\r
- for (uint16_t i = 0; i < 6; i++) {\r
- foundKey[t][sectorNo][i] = 0xff;\r
- }\r
+ e_sector[sectorNo].Key[keyAB] = 0xffffffffffff;\r
+ e_sector[sectorNo].foundKey[keyAB] = 0;\r
}\r
}\r
- \r
- for ( int t = !keyType; t < 2; keyType==2?(t++):(t=2) ) {\r
- int b=blockNo;\r
- for (int i = 0; i < SectorsCnt; ++i) {\r
- PrintAndLog("--sector:%2d, block:%3d, key type:%C, key count:%2d ", i, b, t?'B':'A', keycnt);\r
- uint32_t max_keys = keycnt>USB_CMD_DATA_SIZE/6?USB_CMD_DATA_SIZE/6:keycnt;\r
- for (uint32_t c = 0; c < keycnt; c+=max_keys) {\r
- uint32_t size = keycnt-c>max_keys?max_keys:keycnt-c;\r
- res = mfCheckKeys(b, t, true, size, &keyBlock[6*c], &key64);\r
- if (res != 1) {\r
- if (!res) {\r
- PrintAndLog("Found valid key:[%012"llx"]",key64);\r
- num_to_bytes(key64, 6, foundKey[t][i]);\r
- validKey[t][i] = true;\r
- } \r
+ printf("\n");\r
+\r
+ bool foundAKey = false;\r
+ bool clearTraceLog = true;\r
+ uint32_t max_keys = keycnt > USB_CMD_DATA_SIZE / 6 ? USB_CMD_DATA_SIZE / 6 : keycnt;\r
+\r
+ // !SingleKey, so all key check (if SectorsCnt > 0)\r
+ if (!singleBlock) {\r
+ PrintAndLog("To cancel this operation press the button on the proxmark...");\r
+ printf("--");\r
+ for (uint32_t c = 0; c < keycnt; c += max_keys) {\r
+\r
+ uint32_t size = keycnt-c > max_keys ? max_keys : keycnt-c;\r
+ bool init = (c == 0);\r
+ bool drop_field = (c + size == keycnt);\r
+ res = mfCheckKeysSec(SectorsCnt, keyType, timeout14a, clearTraceLog, init, drop_field, size, &keyBlock[6 * c], e_sector); // timeout is (ms * 106)/10 or us*0.0106\r
+ clearTraceLog = false;\r
+\r
+ if (res != 1) {\r
+ if (!res) {\r
+ printf("o");\r
+ foundAKey = true;\r
} else {\r
- PrintAndLog("Command execute timeout");\r
+ printf(".");\r
}\r
+ } else {\r
+ printf("\n");\r
+ PrintAndLog("Command execute timeout");\r
}\r
- b<127?(b+=4):(b+=16); \r
}\r
+ } else {\r
+ int keyAB = keyType;\r
+ do {\r
+ res = mfCheckKeys(blockNo, keyAB & 0x01, timeout14a, true, keycnt, keyBlock, &key64);\r
+ clearTraceLog = false;\r
+\r
+ if (res != 1) {\r
+ if (!res) {\r
+ // Use the common format below\r
+ // PrintAndLog("Found valid key:[%d:%c]%012" PRIx64, blockNo, (keyAB & 0x01)?'B':'A', key64);\r
+ foundAKey = true;\r
+\r
+ // Store the Single Key for display list\r
+ // For a single block check, SectorsCnt = Sector that contains the block\r
+ e_sector[SectorsCnt-1].foundKey[(keyAB & 0x01)] = true; // flag key found\r
+ e_sector[SectorsCnt-1].Key[(keyAB & 0x01)] = key64; // Save key data\r
+\r
+ }\r
+ } else {\r
+ PrintAndLog("Command execute timeout");\r
+ }\r
+ } while(--keyAB > 0);\r
+ }\r
+\r
+ // print result\r
+ if (foundAKey) {\r
+ PrintAndLog("");\r
+ PrintAndLog("|---|----------------|----------------|");\r
+ PrintAndLog("|sec|key A |key B |");\r
+ PrintAndLog("|---|----------------|----------------|");\r
+ for (i = 0; i < SectorsCnt; i++) {\r
+ // If a block key check, only print a line if a key was found.\r
+ if (!singleBlock || e_sector[i].foundKey[0] || e_sector[i].foundKey[1]) {\r
+ char keyAString[13] = " ? ";\r
+ char keyBString[13] = " ? ";\r
+ if (e_sector[i].foundKey[0]) {\r
+ sprintf(keyAString, "%012" PRIx64, e_sector[i].Key[0]);\r
+ }\r
+ if (e_sector[i].foundKey[1]) {\r
+ sprintf(keyBString, "%012" PRIx64, e_sector[i].Key[1]);\r
+ }\r
+ PrintAndLog("|%03d| %s | %s |", i, keyAString, keyBString);\r
+ }\r
+ }\r
+ PrintAndLog("|---|----------------|----------------|");\r
+ } else {\r
+ PrintAndLog("");\r
+ PrintAndLog("No valid keys found.");\r
}\r
\r
if (transferToEml) {\r
uint8_t block[16];\r
for (uint16_t sectorNo = 0; sectorNo < SectorsCnt; sectorNo++) {\r
- if (validKey[0][sectorNo] || validKey[1][sectorNo]) {\r
+ if (e_sector[sectorNo].foundKey[0] || e_sector[sectorNo].foundKey[1]) {\r
mfEmlGetMem(block, FirstBlockOfSector(sectorNo) + NumBlocksPerSector(sectorNo) - 1, 1);\r
for (uint16_t t = 0; t < 2; t++) {\r
- if (validKey[t][sectorNo]) {\r
- memcpy(block + t*10, foundKey[t][sectorNo], 6);\r
+ if (e_sector[sectorNo].foundKey[t]) {\r
+ num_to_bytes(e_sector[sectorNo].Key[t], 6, block + t * 10);\r
+ keyFoundCount++; // Key found count for information\r
}\r
}\r
mfEmlSetMem(block, FirstBlockOfSector(sectorNo) + NumBlocksPerSector(sectorNo) - 1, 1);\r
}\r
}\r
- PrintAndLog("Found keys have been transferred to the emulator memory");\r
+ // Updated to show the actual number of keys found/transfered.\r
+ PrintAndLog("%d keys(s) found have been transferred to the emulator memory",keyFoundCount);\r
}\r
\r
- if (createDumpFile) {\r
+ if (createDumpFile && !singleBlock) {\r
FILE *fkeys = fopen("dumpkeys.bin","wb");\r
- if (fkeys == NULL) { \r
+ if (fkeys == NULL) {\r
PrintAndLog("Could not create file dumpkeys.bin");\r
+ free(e_sector);\r
free(keyBlock);\r
return 1;\r
}\r
- for (uint16_t t = 0; t < 2; t++) {\r
- fwrite(foundKey[t], 1, 6*SectorsCnt, fkeys);\r
+ uint8_t mkey[6];\r
+ for (uint8_t t = 0; t < 2; t++) {\r
+ for (uint8_t sectorNo = 0; sectorNo < SectorsCnt; sectorNo++) {\r
+ num_to_bytes(e_sector[sectorNo].Key[t], 6, mkey);\r
+ fwrite(mkey, 1, 6, fkeys);\r
+ }\r
}\r
fclose(fkeys);\r
PrintAndLog("Found keys have been dumped to file dumpkeys.bin. 0xffffffffffff has been inserted for unknown keys.");\r
}\r
\r
+ free(e_sector);\r
free(keyBlock);\r
PrintAndLog("");\r
return 0;\r
}\r
\r
+\r
void readerAttack(nonces_t ar_resp[], bool setEmulatorMem, bool doStandardAttack) {\r
- #define ATTACK_KEY_COUNT 8 // keep same as define in iso14443a.c -> Mifare1ksim()\r
+ #define ATTACK_KEY_COUNT 7 // keep same as define in iso14443a.c -> Mifare1ksim()\r
+ // cannot be more than 7 or it will overrun c.d.asBytes(512)\r
uint64_t key = 0;\r
typedef struct {\r
uint64_t keyA;\r
st_t sector_trailer[ATTACK_KEY_COUNT];\r
memset(sector_trailer, 0x00, sizeof(sector_trailer));\r
\r
- uint8_t stSector[ATTACK_KEY_COUNT];\r
+ uint8_t stSector[ATTACK_KEY_COUNT];\r
memset(stSector, 0x00, sizeof(stSector));\r
uint8_t key_cnt[ATTACK_KEY_COUNT];\r
memset(key_cnt, 0x00, sizeof(key_cnt));\r
}\r
}\r
}\r
- } else if (tryMfk32_moebius(ar_resp[i+ATTACK_KEY_COUNT], &key)) {\r
+ } else if (mfkey32_moebius(ar_resp[i+ATTACK_KEY_COUNT], &key)) {\r
uint8_t sectorNum = ar_resp[i+ATTACK_KEY_COUNT].sector;\r
uint8_t keyType = ar_resp[i+ATTACK_KEY_COUNT].keytype;\r
\r
- PrintAndLog("M-Found Key%s for sector %02d: [%012"llx"]"\r
+ PrintAndLog("M-Found Key%s for sector %02d: [%012" PRIx64 "]"\r
, keyType ? "B" : "A"\r
, sectorNum\r
, key\r
if (setEmulatorMem) {\r
for (uint8_t i = 0; i<ATTACK_KEY_COUNT; i++) {\r
if (key_cnt[i]>0) {\r
- uint8_t memBlock[16];\r
+ uint8_t memBlock[16];\r
memset(memBlock, 0x00, sizeof(memBlock));\r
char cmd1[36];\r
memset(cmd1,0x00,sizeof(cmd1));\r
PrintAndLog("block data must include 32 HEX symbols");\r
return;\r
}\r
- \r
+\r
UsbCommand c = {CMD_MIFARE_EML_MEMSET, {(stSector[i]*4+3), 1, 0}};\r
memcpy(c.d.asBytes, memBlock, 16);\r
clearCommandBuffer();\r
- SendCommand(&c); \r
+ SendCommand(&c);\r
}\r
}\r
}\r
}*/\r
}\r
\r
-int usage_hf14_mf1ksim(void) {\r
- PrintAndLog("Usage: hf mf sim h u <uid (8, 14, or 20 hex symbols)> n <numreads> i x");\r
+int usage_hf14_mfsim(void) {\r
+ PrintAndLog("Usage: hf mf sim [h] [*<card memory>] [u <uid (8, 14, or 20 hex symbols)>] [n <numreads>] [i] [x]");\r
PrintAndLog("options:");\r
- PrintAndLog(" h this help");\r
- PrintAndLog(" u (Optional) UID 4,7 or 10 bytes. If not specified, the UID 4B from emulator memory will be used");\r
+ PrintAndLog(" h (Optional) this help");\r
+ PrintAndLog(" card memory: 0 - MINI(320 bytes), 1 - 1K, 2 - 2K, 4 - 4K, <other, default> - 1K");\r
+ PrintAndLog(" u (Optional) UID 4 or 7 bytes. If not specified, the UID 4B from emulator memory will be used");\r
PrintAndLog(" n (Optional) Automatically exit simulation after <numreads> blocks have been read by reader. 0 = infinite");\r
PrintAndLog(" i (Optional) Interactive, means that console will not be returned until simulation finishes or is aborted");\r
PrintAndLog(" x (Optional) Crack, performs the 'reader attack', nr/ar attack against a legitimate reader, fishes out the key(s)");\r
PrintAndLog(" r (Optional) Generate random nonces instead of sequential nonces. Standard reader attack won't work with this option, only moebius attack works.");\r
PrintAndLog("samples:");\r
PrintAndLog(" hf mf sim u 0a0a0a0a");\r
+ PrintAndLog(" hf mf sim *4");\r
PrintAndLog(" hf mf sim u 11223344556677");\r
- PrintAndLog(" hf mf sim u 112233445566778899AA");\r
PrintAndLog(" hf mf sim f uids.txt");\r
PrintAndLog(" hf mf sim u 0a0a0a0a e");\r
- \r
+\r
return 0;\r
}\r
\r
-int CmdHF14AMf1kSim(const char *Cmd) {\r
+int CmdHF14AMfSim(const char *Cmd) {\r
UsbCommand resp;\r
- uint8_t uid[10] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0};\r
+ uint8_t uid[7] = {0};\r
uint8_t exitAfterNReads = 0;\r
uint8_t flags = 0;\r
int uidlen = 0;\r
- uint8_t pnr = 0;\r
bool setEmulatorMem = false;\r
bool attackFromFile = false;\r
FILE *f;\r
\r
uint8_t cmdp = 0;\r
bool errors = false;\r
+ uint8_t cardsize = '1';\r
\r
while(param_getchar(Cmd, cmdp) != 0x00) {\r
switch(param_getchar(Cmd, cmdp)) {\r
+ case '*':\r
+ cardsize = param_getchar(Cmd + 1, cmdp);\r
+ switch(cardsize) {\r
+ case '0':\r
+ case '1':\r
+ case '2':\r
+ case '4': break;\r
+ default: cardsize = '1';\r
+ }\r
+ cmdp++;\r
+ break;\r
case 'e':\r
case 'E':\r
setEmulatorMem = true;\r
break;\r
case 'f':\r
case 'F':\r
- len = param_getstr(Cmd, cmdp+1, filename);\r
+ len = param_getstr(Cmd, cmdp+1, filename, sizeof(filename));\r
if (len < 1) {\r
PrintAndLog("error no filename found");\r
return 0;\r
break;\r
case 'h':\r
case 'H':\r
- return usage_hf14_mf1ksim();\r
+ return usage_hf14_mfsim();\r
case 'i':\r
case 'I':\r
flags |= FLAG_INTERACTIVE;\r
break;\r
case 'n':\r
case 'N':\r
- exitAfterNReads = param_get8(Cmd, pnr+1);\r
+ exitAfterNReads = param_get8(Cmd, cmdp+1);\r
cmdp += 2;\r
break;\r
case 'r':\r
break;\r
case 'u':\r
case 'U':\r
- param_gethex_ex(Cmd, cmdp+1, uid, &uidlen);\r
- switch(uidlen) {\r
- case 20: flags = FLAG_10B_UID_IN_DATA; break; //not complete\r
+ uidlen = 14;\r
+ if (param_gethex_ex(Cmd, cmdp+1, uid, &uidlen)) {\r
+ return usage_hf14_mfsim();\r
+ }\r
+ switch (uidlen) {\r
case 14: flags = FLAG_7B_UID_IN_DATA; break;\r
case 8: flags = FLAG_4B_UID_IN_DATA; break;\r
- default: return usage_hf14_mf1ksim();\r
+ default: return usage_hf14_mfsim();\r
}\r
cmdp += 2;\r
break;\r
if(errors) break;\r
}\r
//Validations\r
- if(errors) return usage_hf14_mf1ksim();\r
+ if(errors) return usage_hf14_mfsim();\r
\r
//get uid from file\r
if (attackFromFile) {\r
memset(buf, 0, sizeof(buf));\r
memset(uid, 0, sizeof(uid));\r
\r
- if (fgets(buf, sizeof(buf), f) == NULL) { \r
+ if (fgets(buf, sizeof(buf), f) == NULL) {\r
if (count > 0) break;\r
- \r
+\r
PrintAndLog("File reading error.");\r
fclose(f);\r
return 2;\r
\r
uidlen = strlen(buf)-1;\r
switch(uidlen) {\r
- case 20: flags |= FLAG_10B_UID_IN_DATA; break; //not complete\r
case 14: flags |= FLAG_7B_UID_IN_DATA; break;\r
case 8: flags |= FLAG_4B_UID_IN_DATA; break;\r
- default: \r
+ default:\r
PrintAndLog("uid in file wrong length at %d (length: %d) [%s]",count, uidlen, buf);\r
fclose(f);\r
return 2;\r
for (uint8_t i = 0; i < uidlen; i += 2) {\r
sscanf(&buf[i], "%02x", (unsigned int *)&uid[i / 2]);\r
}\r
- \r
- PrintAndLog("mf 1k sim uid: %s, numreads:%d, flags:%d (0x%02x) - press button to abort",\r
- flags & FLAG_4B_UID_IN_DATA ? sprint_hex(uid,4):\r
- flags & FLAG_7B_UID_IN_DATA ? sprint_hex(uid,7): \r
- flags & FLAG_10B_UID_IN_DATA ? sprint_hex(uid,10): "N/A"\r
- , exitAfterNReads, flags, flags);\r
-\r
- UsbCommand c = {CMD_SIMULATE_MIFARE_CARD, {flags, exitAfterNReads,0}};\r
+\r
+ PrintAndLog("mf sim cardsize: %s, uid: %s, numreads:%d, flags:%d (0x%02x) - press button to abort",\r
+ cardsize == '0' ? "Mini" :\r
+ cardsize == '2' ? "2K" :\r
+ cardsize == '4' ? "4K" : "1K",\r
+ flags & FLAG_4B_UID_IN_DATA ? sprint_hex(uid,4):\r
+ flags & FLAG_7B_UID_IN_DATA ? sprint_hex(uid,7): "N/A",\r
+ exitAfterNReads,\r
+ flags,\r
+ flags);\r
+\r
+ UsbCommand c = {CMD_SIMULATE_MIFARE_CARD, {flags, exitAfterNReads, cardsize}};\r
memcpy(c.d.asBytes, uid, sizeof(uid));\r
clearCommandBuffer();\r
SendCommand(&c);\r
\r
- while(! WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ while (! WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
//We're waiting only 1.5 s at a time, otherwise we get the\r
// annoying message about "Waiting for a response... "\r
}\r
count++;\r
}\r
fclose(f);\r
- } else { //not from file\r
\r
- PrintAndLog("mf 1k sim uid: %s, numreads:%d, flags:%d (0x%02x) ",\r
- flags & FLAG_4B_UID_IN_DATA ? sprint_hex(uid,4):\r
- flags & FLAG_7B_UID_IN_DATA ? sprint_hex(uid,7): \r
- flags & FLAG_10B_UID_IN_DATA ? sprint_hex(uid,10): "N/A"\r
- , exitAfterNReads, flags, flags);\r
+ } else { //not from file\r
\r
- UsbCommand c = {CMD_SIMULATE_MIFARE_CARD, {flags, exitAfterNReads,0}};\r
+ PrintAndLog("mf sim cardsize: %s, uid: %s, numreads:%d, flags:%d (0x%02x) ",\r
+ cardsize == '0' ? "Mini" :\r
+ cardsize == '2' ? "2K" :\r
+ cardsize == '4' ? "4K" : "1K",\r
+ flags & FLAG_4B_UID_IN_DATA ? sprint_hex(uid,4):\r
+ flags & FLAG_7B_UID_IN_DATA ? sprint_hex(uid,7): "N/A",\r
+ exitAfterNReads,\r
+ flags,\r
+ flags);\r
+\r
+ UsbCommand c = {CMD_SIMULATE_MIFARE_CARD, {flags, exitAfterNReads, cardsize}};\r
memcpy(c.d.asBytes, uid, sizeof(uid));\r
clearCommandBuffer();\r
SendCommand(&c);\r
\r
if(flags & FLAG_INTERACTIVE) {\r
PrintAndLog("Press pm3-button to abort simulation");\r
- while(! WaitForResponseTimeout(CMD_ACK,&resp,1500)) {\r
+ while(! WaitForResponseTimeout(CMD_ACK, &resp, 1500)) {\r
//We're waiting only 1.5 s at a time, otherwise we get the\r
// annoying message about "Waiting for a response... "\r
}\r
PrintAndLog(" 4 - print even debug messages in timing critical functions");\r
PrintAndLog(" Note: this option therefore may cause malfunction itself");\r
return 0;\r
- } \r
+ }\r
\r
- UsbCommand c = {CMD_MIFARE_SET_DBGMODE, {dbgMode, 0, 0}};\r
- SendCommand(&c);\r
+ UsbCommand c = {CMD_MIFARE_SET_DBGMODE, {dbgMode, 0, 0}};\r
+ SendCommand(&c);\r
\r
- return 0;\r
+ return 0;\r
}\r
\r
int CmdHF14AMfEGet(const char *Cmd)\r
PrintAndLog("Usage: hf mf eget <block number>");\r
PrintAndLog(" sample: hf mf eget 0 ");\r
return 0;\r
- } \r
- \r
+ }\r
+\r
blockNo = param_get8(Cmd, 0);\r
\r
PrintAndLog(" ");\r
PrintAndLog("Command execute timeout");\r
}\r
\r
- return 0;\r
+ return 0;\r
}\r
\r
int CmdHF14AMfEClear(const char *Cmd)\r
PrintAndLog("Usage: hf mf eclr");\r
PrintAndLog("It set card emulator memory to empty data blocks and key A/B FFFFFFFFFFFF \n");\r
return 0;\r
- } \r
+ }\r
\r
- UsbCommand c = {CMD_MIFARE_EML_MEMCLR, {0, 0, 0}};\r
- SendCommand(&c);\r
- return 0;\r
+ UsbCommand c = {CMD_MIFARE_EML_MEMCLR, {0, 0, 0}};\r
+ SendCommand(&c);\r
+ return 0;\r
}\r
\r
\r
PrintAndLog("Usage: hf mf eset <block number> <block data (32 hex symbols)>");\r
PrintAndLog(" sample: hf mf eset 1 000102030405060708090a0b0c0d0e0f ");\r
return 0;\r
- } \r
- \r
+ }\r
+\r
blockNo = param_get8(Cmd, 0);\r
- \r
+\r
if (param_gethex(Cmd, 1, memBlock, 32)) {\r
PrintAndLog("block data must include 32 HEX symbols");\r
return 1;\r
}\r
- \r
+\r
// 1 - blocks count\r
- UsbCommand c = {CMD_MIFARE_EML_MEMSET, {blockNo, 1, 0}};\r
- memcpy(c.d.asBytes, memBlock, 16);\r
- SendCommand(&c);\r
- return 0;\r
+ return mfEmlSetMem(memBlock, blockNo, 1);\r
}\r
\r
\r
uint8_t buf8[64] = {0x00};\r
int i, len, blockNum, numBlocks;\r
int nameParamNo = 1;\r
- \r
+\r
char ctmp = param_getchar(Cmd, 0);\r
- \r
+\r
if ( ctmp == 'h' || ctmp == 0x00) {\r
PrintAndLog("It loads emul dump from the file `filename.eml`");\r
PrintAndLog("Usage: hf mf eload [card memory] <file name w/o `.eml`>");\r
PrintAndLog(" sample: hf mf eload filename");\r
PrintAndLog(" hf mf eload 4 filename");\r
return 0;\r
- } \r
+ }\r
\r
switch (ctmp) {\r
case '0' : numBlocks = 5*4; break;\r
- case '1' : \r
+ case '1' :\r
case '\0': numBlocks = 16*4; break;\r
case '2' : numBlocks = 32*4; break;\r
case '4' : numBlocks = 256; break;\r
}\r
}\r
\r
- len = param_getstr(Cmd,nameParamNo,filename);\r
- \r
- if (len > FILE_PATH_SIZE - 4) len = FILE_PATH_SIZE - 4;\r
+ len = param_getstr(Cmd, nameParamNo, filename, sizeof(filename));\r
+\r
+ if (len > FILE_PATH_SIZE - 5) len = FILE_PATH_SIZE - 5;\r
\r
fnameptr += len;\r
\r
- sprintf(fnameptr, ".eml"); \r
- \r
+ sprintf(fnameptr, ".eml");\r
+\r
// open file\r
f = fopen(filename, "r");\r
if (f == NULL) {\r
PrintAndLog("File %s not found or locked", filename);\r
return 1;\r
}\r
- \r
+\r
blockNum = 0;\r
while(!feof(f)){\r
memset(buf, 0, sizeof(buf));\r
- \r
+\r
if (fgets(buf, sizeof(buf), f) == NULL) {\r
- \r
+\r
if (blockNum >= numBlocks) break;\r
- \r
+\r
PrintAndLog("File reading error.");\r
fclose(f);\r
return 2;\r
}\r
- \r
+\r
if (strlen(buf) < 32){\r
if(strlen(buf) && feof(f))\r
break;\r
fclose(f);\r
return 2;\r
}\r
- \r
+\r
for (i = 0; i < 32; i += 2) {\r
sscanf(&buf[i], "%02x", (unsigned int *)&buf8[i / 2]);\r
}\r
- \r
+\r
if (mfEmlSetMem(buf8, blockNum, 1)) {\r
PrintAndLog("Cant set emul block: %3d", blockNum);\r
fclose(f);\r
}\r
printf(".");\r
blockNum++;\r
- \r
+\r
if (blockNum >= numBlocks) break;\r
}\r
fclose(f);\r
printf("\n");\r
- \r
+\r
if ((blockNum != numBlocks)) {\r
PrintAndLog("File content error. Got %d must be %d blocks.",blockNum, numBlocks);\r
return 4;\r
uint8_t buf[64];\r
int i, j, len, numBlocks;\r
int nameParamNo = 1;\r
- \r
+\r
memset(filename, 0, sizeof(filename));\r
memset(buf, 0, sizeof(buf));\r
\r
char ctmp = param_getchar(Cmd, 0);\r
- \r
+\r
if ( ctmp == 'h' || ctmp == 'H') {\r
PrintAndLog("It saves emul dump into the file `filename.eml` or `cardID.eml`");\r
PrintAndLog(" Usage: hf mf esave [card memory] [file name w/o `.eml`]");\r
PrintAndLog(" hf mf esave 4");\r
PrintAndLog(" hf mf esave 4 filename");\r
return 0;\r
- } \r
+ }\r
\r
switch (ctmp) {\r
case '0' : numBlocks = 5*4; break;\r
- case '1' : \r
+ case '1' :\r
case '\0': numBlocks = 16*4; break;\r
case '2' : numBlocks = 32*4; break;\r
case '4' : numBlocks = 256; break;\r
}\r
}\r
\r
- len = param_getstr(Cmd,nameParamNo,filename);\r
- \r
- if (len > FILE_PATH_SIZE - 4) len = FILE_PATH_SIZE - 4;\r
- \r
+ len = param_getstr(Cmd,nameParamNo,filename,sizeof(filename));\r
+\r
+ if (len > FILE_PATH_SIZE - 5) len = FILE_PATH_SIZE - 5;\r
+\r
// user supplied filename?\r
if (len < 1) {\r
// get filename (UID from memory)\r
}\r
\r
// add file extension\r
- sprintf(fnameptr, ".eml"); \r
- \r
+ sprintf(fnameptr, ".eml");\r
+\r
// open file\r
f = fopen(filename, "w+");\r
\r
PrintAndLog("Can't open file %s ", filename);\r
return 1;\r
}\r
- \r
+\r
// put hex\r
for (i = 0; i < numBlocks; i++) {\r
if (mfEmlGetMem(buf, i, 1)) {\r
break;\r
}\r
for (j = 0; j < 16; j++)\r
- fprintf(f, "%02X", buf[j]); \r
+ fprintf(f, "%02X", buf[j]);\r
fprintf(f,"\n");\r
}\r
fclose(f);\r
- \r
+\r
PrintAndLog("Saved %d blocks to file: %s", numBlocks, filename);\r
- \r
- return 0;\r
+\r
+ return 0;\r
}\r
\r
\r
{\r
uint8_t keyType = 0;\r
uint8_t numSectors = 16;\r
- \r
+\r
if (strlen(Cmd) < 1 || param_getchar(Cmd, 0) == 'h') {\r
PrintAndLog("Usage: hf mf ecfill <key A/B> [card memory]");\r
PrintAndLog(" [card memory]: 0 = 320 bytes (Mifare Mini), 1 = 1K (default), 2 = 2K, 4 = 4K");\r
PrintAndLog("Read card and transfer its data to emulator memory.");\r
PrintAndLog("Keys must be laid in the emulator memory. \n");\r
return 0;\r
- } \r
+ }\r
\r
char ctmp = param_getchar(Cmd, 0);\r
if (ctmp != 'a' && ctmp != 'A' && ctmp != 'b' && ctmp != 'B') {\r
ctmp = param_getchar(Cmd, 1);\r
switch (ctmp) {\r
case '0' : numSectors = 5; break;\r
- case '1' : \r
+ case '1' :\r
case '\0': numSectors = 16; break;\r
case '2' : numSectors = 32; break;\r
case '4' : numSectors = 40; break;\r
default: numSectors = 16;\r
- } \r
+ }\r
\r
- printf("--params: numSectors: %d, keyType:%d", numSectors, keyType);\r
+ printf("--params: numSectors: %d, keyType:%d\n", numSectors, keyType);\r
UsbCommand c = {CMD_MIFARE_EML_CARDLOAD, {numSectors, keyType, 0}};\r
SendCommand(&c);\r
return 0;\r
int CmdHF14AMfEKeyPrn(const char *Cmd)\r
{\r
int i;\r
- uint8_t numSectors;\r
+ uint8_t numSectors = 16;\r
uint8_t data[16];\r
uint64_t keyA, keyB;\r
- \r
+ bool createDumpFile = false;\r
+\r
if (param_getchar(Cmd, 0) == 'h') {\r
PrintAndLog("It prints the keys loaded in the emulator memory");\r
- PrintAndLog("Usage: hf mf ekeyprn [card memory]");\r
+ PrintAndLog("Usage: hf mf ekeyprn [card memory] [d]");\r
PrintAndLog(" [card memory]: 0 = 320 bytes (Mifare Mini), 1 = 1K (default), 2 = 2K, 4 = 4K");\r
+ PrintAndLog(" [d] : write keys to binary file dumpkeys.bin");\r
PrintAndLog("");\r
PrintAndLog(" sample: hf mf ekeyprn 1");\r
return 0;\r
- } \r
+ }\r
+\r
+ uint8_t cmdp = 0;\r
+ while (param_getchar(Cmd, cmdp) != 0x00) {\r
+ switch (param_getchar(Cmd, cmdp)) {\r
+ case '0' : numSectors = 5; break;\r
+ case '1' :\r
+ case '\0': numSectors = 16; break;\r
+ case '2' : numSectors = 32; break;\r
+ case '4' : numSectors = 40; break;\r
+ case 'd' :\r
+ case 'D' : createDumpFile = true; break;\r
+ }\r
+ cmdp++;\r
+ }\r
\r
- char cmdp = param_getchar(Cmd, 0);\r
- \r
- switch (cmdp) {\r
- case '0' : numSectors = 5; break;\r
- case '1' : \r
- case '\0': numSectors = 16; break;\r
- case '2' : numSectors = 32; break;\r
- case '4' : numSectors = 40; break;\r
- default: numSectors = 16;\r
- } \r
- \r
PrintAndLog("|---|----------------|----------------|");\r
PrintAndLog("|sec|key A |key B |");\r
PrintAndLog("|---|----------------|----------------|");\r
}\r
keyA = bytes_to_num(data, 6);\r
keyB = bytes_to_num(data + 10, 6);\r
- PrintAndLog("|%03d| %012"llx" | %012"llx" |", i, keyA, keyB);\r
+ PrintAndLog("|%03d| %012" PRIx64 " | %012" PRIx64 " |", i, keyA, keyB);\r
}\r
PrintAndLog("|---|----------------|----------------|");\r
- \r
+\r
+ // Create dump file\r
+ if (createDumpFile) {\r
+ FILE *fkeys;\r
+ if ((fkeys = fopen("dumpkeys.bin","wb")) == NULL) {\r
+ PrintAndLog("Could not create file dumpkeys.bin");\r
+ return 1;\r
+ }\r
+ PrintAndLog("Printing keys to binary file dumpkeys.bin...");\r
+ for(i = 0; i < numSectors; i++) {\r
+ if (mfEmlGetMem(data, FirstBlockOfSector(i) + NumBlocksPerSector(i) - 1, 1)) {\r
+ PrintAndLog("error get block %d", FirstBlockOfSector(i) + NumBlocksPerSector(i) - 1);\r
+ break;\r
+ }\r
+ fwrite(data, 1, 6, fkeys);\r
+ }\r
+ for(i = 0; i < numSectors; i++) {\r
+ if (mfEmlGetMem(data, FirstBlockOfSector(i) + NumBlocksPerSector(i) - 1, 1)) {\r
+ PrintAndLog("error get block %d", FirstBlockOfSector(i) + NumBlocksPerSector(i) - 1);\r
+ break;\r
+ }\r
+ fwrite(data+10, 1, 6, fkeys);\r
+ }\r
+ fclose(fkeys);\r
+ }\r
+\r
return 0;\r
}\r
\r
\r
int CmdHF14AMfCSetUID(const char *Cmd)\r
{\r
- uint8_t wipeCard = 0;\r
uint8_t uid[8] = {0x00};\r
uint8_t oldUid[8] = {0x00};\r
uint8_t atqa[2] = {0x00};\r
uint8_t sak[1] = {0x00};\r
- uint8_t atqaPresent = 1;\r
+ uint8_t atqaPresent = 0;\r
int res;\r
- char ctmp;\r
- int argi=0;\r
\r
- if (strlen(Cmd) < 1 || param_getchar(Cmd, argi) == 'h') {\r
- PrintAndLog("Usage: hf mf csetuid <UID 8 hex symbols> [ATQA 4 hex symbols SAK 2 hex symbols] [w]");\r
- PrintAndLog("sample: hf mf csetuid 01020304");\r
- PrintAndLog("sample: hf mf csetuid 01020304 0004 08 w");\r
- PrintAndLog("Set UID, ATQA, and SAK for magic Chinese card (only works with such cards)");\r
- PrintAndLog("If you also want to wipe the card then add 'w' at the end of the command line.");\r
- return 0;\r
- }\r
+ uint8_t needHelp = 0;\r
+ char cmdp = 1;\r
\r
- if (param_getchar(Cmd, argi) && param_gethex(Cmd, argi, uid, 8)) {\r
+ if (param_getchar(Cmd, 0) && param_gethex(Cmd, 0, uid, 8)) {\r
PrintAndLog("UID must include 8 HEX symbols");\r
return 1;\r
}\r
- argi++;\r
\r
- ctmp = param_getchar(Cmd, argi);\r
- if (ctmp == 'w' || ctmp == 'W') {\r
- wipeCard = 1;\r
- atqaPresent = 0;\r
- }\r
+ if (param_getlength(Cmd, 1) > 1 && param_getlength(Cmd, 2) > 1) {\r
+ atqaPresent = 1;\r
+ cmdp = 3;\r
\r
- if (atqaPresent) {\r
- if (param_getchar(Cmd, argi)) {\r
- if (param_gethex(Cmd, argi, atqa, 4)) {\r
- PrintAndLog("ATQA must include 4 HEX symbols");\r
- return 1;\r
- }\r
- argi++;\r
- if (!param_getchar(Cmd, argi) || param_gethex(Cmd, argi, sak, 2)) {\r
- PrintAndLog("SAK must include 2 HEX symbols");\r
- return 1;\r
- }\r
- argi++;\r
- } else\r
- atqaPresent = 0;\r
+ if (param_gethex(Cmd, 1, atqa, 4)) {\r
+ PrintAndLog("ATQA must include 4 HEX symbols");\r
+ return 1;\r
+ }\r
+\r
+ if (param_gethex(Cmd, 2, sak, 2)) {\r
+ PrintAndLog("SAK must include 2 HEX symbols");\r
+ return 1;\r
+ }\r
}\r
\r
- if(!wipeCard) {\r
- ctmp = param_getchar(Cmd, argi);\r
- if (ctmp == 'w' || ctmp == 'W') {\r
- wipeCard = 1;\r
+ while(param_getchar(Cmd, cmdp) != 0x00)\r
+ {\r
+ switch(param_getchar(Cmd, cmdp))\r
+ {\r
+ case 'h':\r
+ case 'H':\r
+ needHelp = 1;\r
+ break;\r
+ default:\r
+ PrintAndLog("ERROR: Unknown parameter '%c'", param_getchar(Cmd, cmdp));\r
+ needHelp = 1;\r
+ break;\r
}\r
+ cmdp++;\r
}\r
\r
- PrintAndLog("--wipe card:%s uid:%s", (wipeCard)?"YES":"NO", sprint_hex(uid, 4));\r
+ if (strlen(Cmd) < 1 || needHelp) {\r
+ PrintAndLog("");\r
+ PrintAndLog("Usage: hf mf csetuid <UID 8 hex symbols> [ATQA 4 hex symbols SAK 2 hex symbols]");\r
+ PrintAndLog("sample: hf mf csetuid 01020304");\r
+ PrintAndLog("sample: hf mf csetuid 01020304 0004 08");\r
+ PrintAndLog("Set UID, ATQA, and SAK for magic Chinese card (only works with such cards)");\r
+ return 0;\r
+ }\r
+\r
+ PrintAndLog("uid:%s", sprint_hex(uid, 4));\r
+ if (atqaPresent) {\r
+ PrintAndLog("--atqa:%s sak:%02x", sprint_hex(atqa, 2), sak[0]);\r
+ }\r
\r
- res = mfCSetUID(uid, (atqaPresent)?atqa:NULL, (atqaPresent)?sak:NULL, oldUid, wipeCard);\r
+ res = mfCSetUID(uid, (atqaPresent)?atqa:NULL, (atqaPresent)?sak:NULL, oldUid);\r
if (res) {\r
- PrintAndLog("Can't set UID. error=%d", res);\r
+ PrintAndLog("Can't set UID. Error=%d", res);\r
return 1;\r
}\r
- \r
+\r
PrintAndLog("old UID:%s", sprint_hex(oldUid, 4));\r
PrintAndLog("new UID:%s", sprint_hex(uid, 4));\r
return 0;\r
}\r
\r
+int CmdHF14AMfCWipe(const char *Cmd)\r
+{\r
+ int res, gen = 0;\r
+ int numBlocks = 16 * 4;\r
+ bool wipeCard = false;\r
+ bool fillCard = false;\r
+\r
+ if (strlen(Cmd) < 1 || param_getchar(Cmd, 0) == 'h') {\r
+ PrintAndLog("Usage: hf mf cwipe [card size] [w] [f]");\r
+ PrintAndLog("sample: hf mf cwipe 1 w f");\r
+ PrintAndLog("[card size]: 0 = 320 bytes (Mifare Mini), 1 = 1K (default), 2 = 2K, 4 = 4K");\r
+ PrintAndLog("w - Wipe magic Chinese card (only works with gen:1a cards)");\r
+ PrintAndLog("f - Fill the card with default data and keys (works with gen:1a and gen:1b cards only)");\r
+ return 0;\r
+ }\r
+\r
+ gen = mfCIdentify();\r
+ if ((gen != 1) && (gen != 2))\r
+ return 1;\r
+\r
+ numBlocks = ParamCardSizeBlocks(param_getchar(Cmd, 0));\r
+\r
+ char cmdp = 0;\r
+ while(param_getchar(Cmd, cmdp) != 0x00){\r
+ switch(param_getchar(Cmd, cmdp)) {\r
+ case 'w':\r
+ case 'W':\r
+ wipeCard = 1;\r
+ break;\r
+ case 'f':\r
+ case 'F':\r
+ fillCard = 1;\r
+ break;\r
+ default:\r
+ break;\r
+ }\r
+ cmdp++;\r
+ }\r
+\r
+ if (!wipeCard && !fillCard)\r
+ wipeCard = true;\r
+\r
+ PrintAndLog("--blocks count:%2d wipe:%c fill:%c", numBlocks, (wipeCard)?'y':'n', (fillCard)?'y':'n');\r
+\r
+ if (gen == 2) {\r
+ /* generation 1b magic card */\r
+ if (wipeCard) {\r
+ PrintAndLog("WARNING: can't wipe magic card 1b generation");\r
+ }\r
+ res = mfCWipe(numBlocks, true, false, fillCard);\r
+ } else {\r
+ /* generation 1a magic card by default */\r
+ res = mfCWipe(numBlocks, false, wipeCard, fillCard);\r
+ }\r
+\r
+ if (res) {\r
+ PrintAndLog("Can't wipe. error=%d", res);\r
+ return 1;\r
+ }\r
+ PrintAndLog("OK");\r
+ return 0;\r
+}\r
+\r
int CmdHF14AMfCSetBlk(const char *Cmd)\r
{\r
uint8_t memBlock[16] = {0x00};\r
uint8_t blockNo = 0;\r
- bool wipeCard = FALSE;\r
- int res;\r
+ bool wipeCard = false;\r
+ int res, gen = 0;\r
\r
if (strlen(Cmd) < 1 || param_getchar(Cmd, 0) == 'h') {\r
PrintAndLog("Usage: hf mf csetblk <block number> <block data (32 hex symbols)> [w]");\r
PrintAndLog("Set block data for magic Chinese card (only works with such cards)");\r
PrintAndLog("If you also want wipe the card then add 'w' at the end of the command line");\r
return 0;\r
- } \r
+ }\r
+\r
+ gen = mfCIdentify();\r
+ if ((gen != 1) && (gen != 2))\r
+ return 1;\r
\r
blockNo = param_get8(Cmd, 0);\r
\r
wipeCard = (ctmp == 'w' || ctmp == 'W');\r
PrintAndLog("--block number:%2d data:%s", blockNo, sprint_hex(memBlock, 16));\r
\r
- res = mfCSetBlock(blockNo, memBlock, NULL, wipeCard, CSETBLOCK_SINGLE_OPER);\r
+ if (gen == 2) {\r
+ /* generation 1b magic card */\r
+ res = mfCSetBlock(blockNo, memBlock, NULL, wipeCard, CSETBLOCK_SINGLE_OPER | CSETBLOCK_MAGIC_1B);\r
+ } else {\r
+ /* generation 1a magic card by default */\r
+ res = mfCSetBlock(blockNo, memBlock, NULL, wipeCard, CSETBLOCK_SINGLE_OPER);\r
+ }\r
+\r
if (res) {\r
PrintAndLog("Can't write block. error=%d", res);\r
return 1;\r
FILE * f;\r
char filename[FILE_PATH_SIZE] = {0x00};\r
char * fnameptr = filename;\r
- char buf[64] = {0x00};\r
- uint8_t buf8[64] = {0x00};\r
+ char buf[256] = {0x00};\r
+ uint8_t buf8[256] = {0x00};\r
uint8_t fillFromEmulator = 0;\r
- int i, len, blockNum, flags=0;\r
- \r
+ int i, len, blockNum, flags = 0, gen = 0, numblock = 64;\r
+\r
if (param_getchar(Cmd, 0) == 'h' || param_getchar(Cmd, 0)== 0x00) {\r
PrintAndLog("It loads magic Chinese card from the file `filename.eml`");\r
- PrintAndLog("or from emulator memory (option `e`)");\r
- PrintAndLog("Usage: hf mf cload <file name w/o `.eml`>");\r
- PrintAndLog(" or: hf mf cload e ");\r
- PrintAndLog(" sample: hf mf cload filename");\r
+ PrintAndLog("or from emulator memory (option `e`). 4K card: (option `4`)");\r
+ PrintAndLog("Usage: hf mf cload [file name w/o `.eml`][e][4]");\r
+ PrintAndLog(" or: hf mf cload e [4]");\r
+ PrintAndLog("Sample: hf mf cload filename");\r
+ PrintAndLog(" hf mf cload filname 4");\r
+ PrintAndLog(" hf mf cload e");\r
+ PrintAndLog(" hf mf cload e 4");\r
return 0;\r
- } \r
+ }\r
\r
char ctmp = param_getchar(Cmd, 0);\r
if (ctmp == 'e' || ctmp == 'E') fillFromEmulator = 1;\r
- \r
+ ctmp = param_getchar(Cmd, 1);\r
+ if (ctmp == '4') numblock = 256;\r
+\r
+ gen = mfCIdentify();\r
+ PrintAndLog("Loading magic mifare %dK", numblock == 256 ? 4:1);\r
+\r
if (fillFromEmulator) {\r
- for (blockNum = 0; blockNum < 16 * 4; blockNum += 1) {\r
+ for (blockNum = 0; blockNum < numblock; blockNum += 1) {\r
if (mfEmlGetMem(buf8, blockNum, 1)) {\r
PrintAndLog("Cant get block: %d", blockNum);\r
return 2;\r
}\r
- if (blockNum == 0) flags = CSETBLOCK_INIT_FIELD + CSETBLOCK_WUPC; // switch on field and send magic sequence\r
- if (blockNum == 1) flags = 0; // just write\r
- if (blockNum == 16 * 4 - 1) flags = CSETBLOCK_HALT + CSETBLOCK_RESET_FIELD; // Done. Magic Halt and switch off field.\r
+ if (blockNum == 0) flags = CSETBLOCK_INIT_FIELD + CSETBLOCK_WUPC; // switch on field and send magic sequence\r
+ if (blockNum == 1) flags = 0; // just write\r
+ if (blockNum == numblock - 1) flags = CSETBLOCK_HALT + CSETBLOCK_RESET_FIELD; // Done. Magic Halt and switch off field.\r
\r
+ if (gen == 2)\r
+ /* generation 1b magic card */\r
+ flags |= CSETBLOCK_MAGIC_1B;\r
if (mfCSetBlock(blockNum, buf8, NULL, 0, flags)) {\r
PrintAndLog("Cant set magic card block: %d", blockNum);\r
return 3;\r
}\r
return 0;\r
} else {\r
- len = strlen(Cmd);\r
- if (len > FILE_PATH_SIZE - 4) len = FILE_PATH_SIZE - 4;\r
+ param_getstr(Cmd, 0, filename, sizeof(filename));\r
+\r
+ len = strlen(filename);\r
+ if (len > FILE_PATH_SIZE - 5) len = FILE_PATH_SIZE - 5;\r
\r
- memcpy(filename, Cmd, len);\r
+ //memcpy(filename, Cmd, len);\r
fnameptr += len;\r
\r
- sprintf(fnameptr, ".eml"); \r
- \r
+ sprintf(fnameptr, ".eml");\r
+\r
// open file\r
f = fopen(filename, "r");\r
if (f == NULL) {\r
PrintAndLog("File not found or locked.");\r
return 1;\r
}\r
- \r
+\r
blockNum = 0;\r
while(!feof(f)){\r
- \r
+\r
memset(buf, 0, sizeof(buf));\r
- \r
+\r
if (fgets(buf, sizeof(buf), f) == NULL) {\r
fclose(f);\r
PrintAndLog("File reading error.");\r
for (i = 0; i < 32; i += 2)\r
sscanf(&buf[i], "%02x", (unsigned int *)&buf8[i / 2]);\r
\r
- if (blockNum == 0) flags = CSETBLOCK_INIT_FIELD + CSETBLOCK_WUPC; // switch on field and send magic sequence\r
- if (blockNum == 1) flags = 0; // just write\r
- if (blockNum == 16 * 4 - 1) flags = CSETBLOCK_HALT + CSETBLOCK_RESET_FIELD; // Done. Switch off field.\r
+ if (blockNum == 0) flags = CSETBLOCK_INIT_FIELD + CSETBLOCK_WUPC; // switch on field and send magic sequence\r
+ if (blockNum == 1) flags = 0; // just write\r
+ if (blockNum == numblock - 1) flags = CSETBLOCK_HALT + CSETBLOCK_RESET_FIELD; // Done. Switch off field.\r
\r
+ if (gen == 2)\r
+ /* generation 1b magic card */\r
+ flags |= CSETBLOCK_MAGIC_1B;\r
if (mfCSetBlock(blockNum, buf8, NULL, 0, flags)) {\r
PrintAndLog("Can't set magic card block: %d", blockNum);\r
+ fclose(f);\r
return 3;\r
}\r
blockNum++;\r
- \r
- if (blockNum >= 16 * 4) break; // magic card type - mifare 1K\r
+\r
+ if (blockNum >= numblock) break; // magic card type - mifare 1K 64 blocks, mifare 4k 256 blocks\r
}\r
fclose(f);\r
- \r
- if (blockNum != 16 * 4 && blockNum != 32 * 4 + 8 * 16){\r
- PrintAndLog("File content error. There must be 64 blocks");\r
+\r
+ //if (blockNum != 16 * 4 && blockNum != 32 * 4 + 8 * 16){\r
+ if (blockNum != numblock){\r
+ PrintAndLog("File content error. There must be %d blocks", numblock);\r
return 4;\r
}\r
PrintAndLog("Loaded from file: %s", filename);\r
int CmdHF14AMfCGetBlk(const char *Cmd) {\r
uint8_t memBlock[16];\r
uint8_t blockNo = 0;\r
- int res;\r
+ int res, gen = 0;\r
memset(memBlock, 0x00, sizeof(memBlock));\r
\r
if (strlen(Cmd) < 1 || param_getchar(Cmd, 0) == 'h') {\r
PrintAndLog("sample: hf mf cgetblk 1");\r
PrintAndLog("Get block data from magic Chinese card (only works with such cards)\n");\r
return 0;\r
- } \r
+ }\r
+\r
+ gen = mfCIdentify();\r
\r
blockNo = param_get8(Cmd, 0);\r
\r
PrintAndLog("--block number:%2d ", blockNo);\r
\r
- res = mfCGetBlock(blockNo, memBlock, CSETBLOCK_SINGLE_OPER);\r
+ if (gen == 2) {\r
+ /* generation 1b magic card */\r
+ res = mfCGetBlock(blockNo, memBlock, CSETBLOCK_SINGLE_OPER | CSETBLOCK_MAGIC_1B);\r
+ } else {\r
+ /* generation 1a magic card by default */\r
+ res = mfCGetBlock(blockNo, memBlock, CSETBLOCK_SINGLE_OPER);\r
+ }\r
if (res) {\r
PrintAndLog("Can't read block. error=%d", res);\r
return 1;\r
}\r
- \r
+\r
PrintAndLog("block data:%s", sprint_hex(memBlock, 16));\r
+\r
+ if (mfIsSectorTrailer(blockNo)) {\r
+ PrintAndLogEx(NORMAL, "Trailer decoded:");\r
+ PrintAndLogEx(NORMAL, "Key A: %s", sprint_hex_inrow(memBlock, 6));\r
+ PrintAndLogEx(NORMAL, "Key B: %s", sprint_hex_inrow(&memBlock[10], 6));\r
+ int bln = mfFirstBlockOfSector(mfSectorNum(blockNo));\r
+ int blinc = (mfNumBlocksPerSector(mfSectorNum(blockNo)) > 4) ? 5 : 1;\r
+ for (int i = 0; i < 4; i++) {\r
+ PrintAndLogEx(NORMAL, "Access block %d%s: %s", bln, ((blinc > 1) && (i < 3) ? "+" : "") , mfGetAccessConditionsDesc(i, &memBlock[6]));\r
+ bln += blinc;\r
+ }\r
+ PrintAndLogEx(NORMAL, "UserData: %s", sprint_hex_inrow(&memBlock[9], 1));\r
+ }\r
+\r
return 0;\r
}\r
\r
-\r
int CmdHF14AMfCGetSc(const char *Cmd) {\r
uint8_t memBlock[16] = {0x00};\r
uint8_t sectorNo = 0;\r
- int i, res, flags;\r
+ int i, res, flags, gen = 0, baseblock = 0, sect_size = 4;\r
\r
if (strlen(Cmd) < 1 || param_getchar(Cmd, 0) == 'h') {\r
PrintAndLog("Usage: hf mf cgetsc <sector number>");\r
PrintAndLog("sample: hf mf cgetsc 0");\r
PrintAndLog("Get sector data from magic Chinese card (only works with such cards)\n");\r
return 0;\r
- } \r
+ }\r
\r
sectorNo = param_get8(Cmd, 0);\r
- if (sectorNo > 15) {\r
- PrintAndLog("Sector number must be in [0..15] as in MIFARE classic.");\r
+\r
+ if (sectorNo > 39) {\r
+ PrintAndLog("Sector number must be in [0..15] in MIFARE classic 1k and [0..39] in MIFARE classic 4k.");\r
return 1;\r
}\r
\r
PrintAndLog("--sector number:%d ", sectorNo);\r
\r
+ gen = mfCIdentify();\r
+\r
flags = CSETBLOCK_INIT_FIELD + CSETBLOCK_WUPC;\r
- for (i = 0; i < 4; i++) {\r
+ if (sectorNo < 32 ) {\r
+ baseblock = sectorNo * 4;\r
+ } else {\r
+ baseblock = 128 + 16 * (sectorNo - 32);\r
+\r
+ }\r
+ if (sectorNo > 31) sect_size = 16;\r
+\r
+ for (i = 0; i < sect_size; i++) {\r
if (i == 1) flags = 0;\r
- if (i == 3) flags = CSETBLOCK_HALT + CSETBLOCK_RESET_FIELD;\r
+ if (i == sect_size - 1) flags = CSETBLOCK_HALT + CSETBLOCK_RESET_FIELD;\r
+\r
+ if (gen == 2)\r
+ /* generation 1b magic card */\r
+ flags |= CSETBLOCK_MAGIC_1B;\r
\r
- res = mfCGetBlock(sectorNo * 4 + i, memBlock, flags);\r
+ res = mfCGetBlock(baseblock + i, memBlock, flags);\r
if (res) {\r
- PrintAndLog("Can't read block. %d error=%d", sectorNo * 4 + i, res);\r
+ PrintAndLog("Can't read block. %d error=%d", baseblock + i, res);\r
return 1;\r
}\r
- \r
- PrintAndLog("block %3d data:%s", sectorNo * 4 + i, sprint_hex(memBlock, 16));\r
+\r
+ PrintAndLog("block %3d data:%s", baseblock + i, sprint_hex(memBlock, 16));\r
+\r
+ if (mfIsSectorTrailer(baseblock + i)) {\r
+ PrintAndLogEx(NORMAL, "Trailer decoded:");\r
+ PrintAndLogEx(NORMAL, "Key A: %s", sprint_hex_inrow(memBlock, 6));\r
+ PrintAndLogEx(NORMAL, "Key B: %s", sprint_hex_inrow(&memBlock[10], 6));\r
+ int bln = baseblock;\r
+ int blinc = (mfNumBlocksPerSector(sectorNo) > 4) ? 5 : 1;\r
+ for (int i = 0; i < 4; i++) {\r
+ PrintAndLogEx(NORMAL, "Access block %d%s: %s", bln, ((blinc > 1) && (i < 3) ? "+" : "") , mfGetAccessConditionsDesc(i, &memBlock[6]));\r
+ bln += blinc;\r
+ }\r
+ PrintAndLogEx(NORMAL, "UserData: %s", sprint_hex_inrow(&memBlock[9], 1));\r
+ }\r
}\r
return 0;\r
}\r
char filename[FILE_PATH_SIZE] = {0x00};\r
char * fnameptr = filename;\r
uint8_t fillFromEmulator = 0;\r
- uint8_t buf[64] = {0x00};\r
- int i, j, len, flags;\r
- \r
+ uint8_t buf[256] = {0x00};\r
+ int i, j, len, flags, gen = 0, numblock = 64;\r
+\r
// memset(filename, 0, sizeof(filename));\r
// memset(buf, 0, sizeof(buf));\r
\r
if (param_getchar(Cmd, 0) == 'h') {\r
PrintAndLog("It saves `magic Chinese` card dump into the file `filename.eml` or `cardID.eml`");\r
- PrintAndLog("or into emulator memory (option `e`)");\r
- PrintAndLog("Usage: hf mf esave [file name w/o `.eml`][e]");\r
- PrintAndLog(" sample: hf mf esave ");\r
- PrintAndLog(" hf mf esave filename");\r
- PrintAndLog(" hf mf esave e \n");\r
+ PrintAndLog("or into emulator memory (option `e`). 4K card: (option `4`)");\r
+ PrintAndLog("Usage: hf mf csave [file name w/o `.eml`][e][4]");\r
+ PrintAndLog("Sample: hf mf csave ");\r
+ PrintAndLog(" hf mf csave filename");\r
+ PrintAndLog(" hf mf csave e");\r
+ PrintAndLog(" hf mf csave 4");\r
+ PrintAndLog(" hf mf csave filename 4");\r
+ PrintAndLog(" hf mf csave e 4");\r
return 0;\r
- } \r
+ }\r
\r
char ctmp = param_getchar(Cmd, 0);\r
if (ctmp == 'e' || ctmp == 'E') fillFromEmulator = 1;\r
+ if (ctmp == '4') numblock = 256;\r
+ ctmp = param_getchar(Cmd, 1);\r
+ if (ctmp == '4') numblock = 256;\r
+\r
+ gen = mfCIdentify();\r
+ PrintAndLog("Saving magic mifare %dK", numblock == 256 ? 4:1);\r
\r
if (fillFromEmulator) {\r
// put into emulator\r
flags = CSETBLOCK_INIT_FIELD + CSETBLOCK_WUPC;\r
- for (i = 0; i < 16 * 4; i++) {\r
+ for (i = 0; i < numblock; i++) {\r
if (i == 1) flags = 0;\r
- if (i == 16 * 4 - 1) flags = CSETBLOCK_HALT + CSETBLOCK_RESET_FIELD;\r
- \r
+ if (i == numblock - 1) flags = CSETBLOCK_HALT + CSETBLOCK_RESET_FIELD;\r
+\r
+ if (gen == 2)\r
+ /* generation 1b magic card */\r
+ flags |= CSETBLOCK_MAGIC_1B;\r
+\r
if (mfCGetBlock(i, buf, flags)) {\r
PrintAndLog("Cant get block: %d", i);\r
break;\r
}\r
- \r
+\r
if (mfEmlSetMem(buf, i, 1)) {\r
PrintAndLog("Cant set emul block: %d", i);\r
return 3;\r
}\r
return 0;\r
} else {\r
- len = strlen(Cmd);\r
- if (len > FILE_PATH_SIZE - 4) len = FILE_PATH_SIZE - 4;\r
- \r
- if (len < 1) {\r
+ param_getstr(Cmd, 0, filename, sizeof(filename));\r
+\r
+ len = strlen(filename);\r
+ if (len > FILE_PATH_SIZE - 5) len = FILE_PATH_SIZE - 5;\r
+\r
+ ctmp = param_getchar(Cmd, 0);\r
+ if (len < 1 || (ctmp == '4')) {\r
// get filename\r
- if (mfCGetBlock(0, buf, CSETBLOCK_SINGLE_OPER)) {\r
+\r
+ flags = CSETBLOCK_SINGLE_OPER;\r
+ if (gen == 2)\r
+ /* generation 1b magic card */\r
+ flags |= CSETBLOCK_MAGIC_1B;\r
+ if (mfCGetBlock(0, buf, flags)) {\r
PrintAndLog("Cant get block: %d", 0);\r
len = sprintf(fnameptr, "dump");\r
fnameptr += len;\r
}\r
else {\r
for (j = 0; j < 7; j++, fnameptr += 2)\r
- sprintf(fnameptr, "%02x", buf[j]); \r
+ sprintf(fnameptr, "%02x", buf[j]);\r
}\r
} else {\r
- memcpy(filename, Cmd, len);\r
+ //memcpy(filename, Cmd, len);\r
fnameptr += len;\r
}\r
\r
- sprintf(fnameptr, ".eml"); \r
- \r
+ sprintf(fnameptr, ".eml");\r
+\r
// open file\r
f = fopen(filename, "w+");\r
\r
\r
// put hex\r
flags = CSETBLOCK_INIT_FIELD + CSETBLOCK_WUPC;\r
- for (i = 0; i < 16 * 4; i++) {\r
+ for (i = 0; i < numblock; i++) {\r
if (i == 1) flags = 0;\r
- if (i == 16 * 4 - 1) flags = CSETBLOCK_HALT + CSETBLOCK_RESET_FIELD;\r
- \r
+ if (i == numblock - 1) flags = CSETBLOCK_HALT + CSETBLOCK_RESET_FIELD;\r
+\r
+ if (gen == 2)\r
+ /* generation 1b magic card */\r
+ flags |= CSETBLOCK_MAGIC_1B;\r
if (mfCGetBlock(i, buf, flags)) {\r
PrintAndLog("Cant get block: %d", i);\r
break;\r
}\r
for (j = 0; j < 16; j++)\r
- fprintf(f, "%02x", buf[j]); \r
+ fprintf(f, "%02x", buf[j]);\r
fprintf(f,"\n");\r
}\r
fclose(f);\r
- \r
+\r
PrintAndLog("Saved to file: %s", filename);\r
- \r
+\r
return 0;\r
}\r
}\r
//bool wantSaveToEml = 0; TODO\r
bool wantSaveToEmlFile = 0;\r
\r
- //var \r
+ //var\r
int res = 0;\r
int len = 0;\r
+ int parlen = 0;\r
int blockLen = 0;\r
int pckNum = 0;\r
int num = 0;\r
uint8_t *buf = NULL;\r
uint16_t bufsize = 0;\r
uint8_t *bufPtr = NULL;\r
- \r
+ uint8_t parity[16];\r
+\r
char ctmp = param_getchar(Cmd, 0);\r
if ( ctmp == 'h' || ctmp == 'H' ) {\r
PrintAndLog("It continuously gets data from the field and saves it to: log, emulator, emulator file.");\r
PrintAndLog("Usage: hf mf sniff [l][d][e][f]");\r
PrintAndLog(" sample: hf mf sniff l d e");\r
return 0;\r
- } \r
- \r
+ }\r
+\r
for (int i = 0; i < 4; i++) {\r
ctmp = param_getchar(Cmd, i);\r
if (ctmp == 'l' || ctmp == 'L') wantLogToFile = true;\r
//if (ctmp == 'e' || ctmp == 'E') wantSaveToEml = true; TODO\r
if (ctmp == 'f' || ctmp == 'F') wantSaveToEmlFile = true;\r
}\r
- \r
+\r
printf("-------------------------------------------------------------------------\n");\r
printf("Executing command. \n");\r
printf("Press the key on the proxmark3 device to abort both proxmark3 and client.\n");\r
printf("\naborted via keyboard!\n");\r
break;\r
}\r
- \r
+\r
UsbCommand resp;\r
- if (WaitForResponseTimeout(CMD_ACK,&resp,2000)) {\r
+ if (WaitForResponseTimeoutW(CMD_ACK, &resp, 2000, false)) {\r
res = resp.arg[0] & 0xff;\r
uint16_t traceLen = resp.arg[1];\r
len = resp.arg[2];\r
\r
- if (res == 0) return 0; // we are done\r
+ if (res == 0) { // we are done\r
+ break;\r
+ }\r
\r
- if (res == 1) { // there is (more) data to be transferred\r
- if (pckNum == 0) { // first packet, (re)allocate necessary buffer\r
- if (traceLen > bufsize) {\r
+ if (res == 1) { // there is (more) data to be transferred\r
+ if (pckNum == 0) { // first packet, (re)allocate necessary buffer\r
+ if (traceLen > bufsize || buf == NULL) {\r
uint8_t *p;\r
- if (buf == NULL) { // not yet allocated\r
+ if (buf == NULL) { // not yet allocated\r
p = malloc(traceLen);\r
- } else { // need more memory\r
+ } else { // need more memory\r
p = realloc(buf, traceLen);\r
}\r
if (p == NULL) {\r
pckNum++;\r
}\r
\r
- if (res == 2) { // received all data, start displaying\r
+ if (res == 2) { // received all data, start displaying\r
blockLen = bufPtr - buf;\r
bufPtr = buf;\r
printf(">\n");\r
PrintAndLog("received trace len: %d packages: %d", blockLen, pckNum);\r
while (bufPtr - buf < blockLen) {\r
- bufPtr += 6; // skip (void) timing information\r
+ bufPtr += 6; // skip (void) timing information\r
len = *((uint16_t *)bufPtr);\r
if(len & 0x8000) {\r
isTag = true;\r
} else {\r
isTag = false;\r
}\r
+ parlen = (len - 1) / 8 + 1;\r
bufPtr += 2;\r
if ((len == 14) && (bufPtr[0] == 0xff) && (bufPtr[1] == 0xff) && (bufPtr[12] == 0xff) && (bufPtr[13] == 0xff)) {\r
memcpy(uid, bufPtr + 2, 7);\r
memcpy(atqa, bufPtr + 2 + 7, 2);\r
uid_len = (atqa[0] & 0xC0) == 0x40 ? 7 : 4;\r
sak = bufPtr[11];\r
- PrintAndLog("tag select uid:%s atqa:0x%02x%02x sak:0x%02x", \r
+ PrintAndLog("tag select uid:%s atqa:0x%02x%02x sak:0x%02x",\r
sprint_hex(uid + (7 - uid_len), uid_len),\r
- atqa[1], \r
- atqa[0], \r
+ atqa[1],\r
+ atqa[0],\r
sak);\r
if (wantLogToFile || wantDecrypt) {\r
FillFileNameByUID(logHexFileName, uid + (7 - uid_len), ".log", uid_len);\r
AddLogCurrentDT(logHexFileName);\r
- } \r
- if (wantDecrypt) \r
+ }\r
+ if (wantDecrypt)\r
mfTraceInit(uid, atqa, sak, wantSaveToEmlFile);\r
} else {\r
- PrintAndLog("%s(%d):%s", isTag ? "TAG":"RDR", num, sprint_hex(bufPtr, len));\r
- if (wantLogToFile) \r
+ oddparitybuf(bufPtr, len, parity);\r
+ PrintAndLog("%s(%d):%s [%s] c[%s]%c",\r
+ isTag ? "TAG":"RDR",\r
+ num,\r
+ sprint_hex(bufPtr, len),\r
+ printBitsPar(bufPtr + len, len),\r
+ printBitsPar(parity, len),\r
+ memcmp(bufPtr + len, parity, len / 8 + 1) ? '!' : ' ');\r
+ if (wantLogToFile)\r
AddLogHex(logHexFileName, isTag ? "TAG: ":"RDR: ", bufPtr, len);\r
- if (wantDecrypt) \r
- mfTraceDecode(bufPtr, len, wantSaveToEmlFile);\r
- num++; \r
+ if (wantDecrypt)\r
+ mfTraceDecode(bufPtr, len, bufPtr[len], wantSaveToEmlFile);\r
+ num++;\r
}\r
bufPtr += len;\r
- bufPtr += ((len-1)/8+1); // ignore parity\r
+ bufPtr += parlen; // ignore parity\r
}\r
pckNum = 0;\r
}\r
} // while (true)\r
\r
free(buf);\r
+\r
+ msleep(300); // wait for exiting arm side.\r
+ PrintAndLog("Done.");\r
return 0;\r
}\r
\r
//needs nt, ar, at, Data to decrypt\r
int CmdDecryptTraceCmds(const char *Cmd){\r
uint8_t data[50];\r
- int len = 0;\r
- param_gethex_ex(Cmd,3,data,&len);\r
- return tryDecryptWord(param_get32ex(Cmd,0,0,16),param_get32ex(Cmd,1,0,16),param_get32ex(Cmd,2,0,16),data,len/2);\r
+ int len = 100;\r
+ param_gethex_ex(Cmd, 3, data, &len);\r
+ return tryDecryptWord(param_get32ex(Cmd, 0, 0, 16), param_get32ex(Cmd, 1, 0, 16), param_get32ex(Cmd, 2, 0, 16), data, len/2);\r
}\r
\r
-static command_t CommandTable[] =\r
-{\r
- {"help", CmdHelp, 1, "This help"},\r
- {"dbg", CmdHF14AMfDbg, 0, "Set default debug mode"},\r
- {"rdbl", CmdHF14AMfRdBl, 0, "Read MIFARE classic block"},\r
- {"rdsc", CmdHF14AMfRdSc, 0, "Read MIFARE classic sector"},\r
- {"dump", CmdHF14AMfDump, 0, "Dump MIFARE classic tag to binary file"},\r
- {"restore", CmdHF14AMfRestore, 0, "Restore MIFARE classic binary file to BLANK tag"},\r
- {"wrbl", CmdHF14AMfWrBl, 0, "Write MIFARE classic block"},\r
- {"chk", CmdHF14AMfChk, 0, "Test block keys"},\r
- {"mifare", CmdHF14AMifare, 0, "Read parity error messages."},\r
- {"nested", CmdHF14AMfNested, 0, "Test nested authentication"},\r
- {"sniff", CmdHF14AMfSniff, 0, "Sniff card-reader communication"},\r
- {"sim", CmdHF14AMf1kSim, 0, "Simulate MIFARE card"},\r
- {"eclr", CmdHF14AMfEClear, 0, "Clear simulator memory block"},\r
- {"eget", CmdHF14AMfEGet, 0, "Get simulator memory block"},\r
- {"eset", CmdHF14AMfESet, 0, "Set simulator memory block"},\r
- {"eload", CmdHF14AMfELoad, 0, "Load from file emul dump"},\r
- {"esave", CmdHF14AMfESave, 0, "Save to file emul dump"},\r
- {"ecfill", CmdHF14AMfECFill, 0, "Fill simulator memory with help of keys from simulator"},\r
- {"ekeyprn", CmdHF14AMfEKeyPrn, 0, "Print keys from simulator memory"},\r
- {"csetuid", CmdHF14AMfCSetUID, 0, "Set UID for magic Chinese card"},\r
- {"csetblk", CmdHF14AMfCSetBlk, 0, "Write block - Magic Chinese card"},\r
- {"cgetblk", CmdHF14AMfCGetBlk, 0, "Read block - Magic Chinese card"},\r
- {"cgetsc", CmdHF14AMfCGetSc, 0, "Read sector - Magic Chinese card"},\r
- {"cload", CmdHF14AMfCLoad, 0, "Load dump into magic Chinese card"},\r
- {"csave", CmdHF14AMfCSave, 0, "Save dump from magic Chinese card into file or emulator"},\r
- {"decrypt", CmdDecryptTraceCmds,1, "[nt] [ar_enc] [at_enc] [data] - to decrypt snoop or trace"},\r
- {NULL, NULL, 0, NULL}\r
+int CmdHF14AMfAuth4(const char *cmd) {\r
+ uint8_t keyn[20] = {0};\r
+ int keynlen = 0;\r
+ uint8_t key[16] = {0};\r
+ int keylen = 0;\r
+\r
+ CLIParserInit("hf mf auth4",\r
+ "Executes AES authentication command in ISO14443-4",\r
+ "Usage:\n\thf mf auth4 4000 000102030405060708090a0b0c0d0e0f -> executes authentication\n"\r
+ "\thf mf auth4 9003 FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF -> executes authentication\n");\r
+\r
+ void* argtable[] = {\r
+ arg_param_begin,\r
+ arg_str1(NULL, NULL, "<Key Num (HEX 2 bytes)>", NULL),\r
+ arg_str1(NULL, NULL, "<Key Value (HEX 16 bytes)>", NULL),\r
+ arg_param_end\r
+ };\r
+ CLIExecWithReturn(cmd, argtable, true);\r
+\r
+ CLIGetHexWithReturn(1, keyn, &keynlen);\r
+ CLIGetHexWithReturn(2, key, &keylen);\r
+ CLIParserFree();\r
+\r
+ if (keynlen != 2) {\r
+ PrintAndLog("ERROR: <Key Num> must be 2 bytes long instead of: %d", keynlen);\r
+ return 1;\r
+ }\r
+\r
+ if (keylen != 16) {\r
+ PrintAndLog("ERROR: <Key Value> must be 16 bytes long instead of: %d", keylen);\r
+ return 1;\r
+ }\r
+\r
+ return MifareAuth4(NULL, keyn, key, true, false, true);\r
+}\r
+\r
+// https://www.nxp.com/docs/en/application-note/AN10787.pdf\r
+int CmdHF14AMfMAD(const char *cmd) {\r
+\r
+ CLIParserInit("hf mf mad",\r
+ "Checks and prints Mifare Application Directory (MAD)",\r
+ "Usage:\n\thf mf mad -> shows MAD if exists\n"\r
+ "\thf mf mad -a 03e1 -k ffffffffffff -b -> shows NDEF data if exists. read card with custom key and key B\n");\r
+\r
+ void *argtable[] = {\r
+ arg_param_begin,\r
+ arg_lit0("vV", "verbose", "show technical data"),\r
+ arg_str0("aA", "aid", "print all sectors with aid", NULL),\r
+ arg_str0("kK", "key", "key for printing sectors", NULL),\r
+ arg_lit0("bB", "keyb", "use key B for access printing sectors (by default: key A)"),\r
+ arg_param_end\r
+ };\r
+ CLIExecWithReturn(cmd, argtable, true);\r
+ bool verbose = arg_get_lit(1);\r
+ uint8_t aid[2] = {0};\r
+ int aidlen;\r
+ CLIGetHexWithReturn(2, aid, &aidlen);\r
+ uint8_t key[6] = {0};\r
+ int keylen;\r
+ CLIGetHexWithReturn(3, key, &keylen);\r
+ bool keyB = arg_get_lit(4);\r
+\r
+ CLIParserFree();\r
+\r
+ if (aidlen != 2 && keylen > 0) {\r
+ PrintAndLogEx(WARNING, "do not need a key without aid.");\r
+ }\r
+\r
+ uint8_t sector0[16 * 4] = {0};\r
+ uint8_t sector10[16 * 4] = {0};\r
+ if (mfReadSector(MF_MAD1_SECTOR, MF_KEY_A, (uint8_t *)g_mifare_mad_key, sector0)) {\r
+ PrintAndLogEx(ERR, "read sector 0 error. card don't have MAD or don't have MAD on default keys.");\r
+ return 2;\r
+ }\r
+\r
+ if (verbose) {\r
+ for (int i = 0; i < 4; i ++)\r
+ PrintAndLogEx(NORMAL, "[%d] %s", i, sprint_hex(§or0[i * 16], 16));\r
+ }\r
+\r
+ bool haveMAD2 = false;\r
+ MAD1DecodeAndPrint(sector0, verbose, &haveMAD2);\r
+\r
+ if (haveMAD2) {\r
+ if (mfReadSector(MF_MAD2_SECTOR, MF_KEY_A, (uint8_t *)g_mifare_mad_key, sector10)) {\r
+ PrintAndLogEx(ERR, "read sector 0x10 error. card don't have MAD or don't have MAD on default keys.");\r
+ return 2;\r
+ }\r
+\r
+ MAD2DecodeAndPrint(sector10, verbose);\r
+ }\r
+\r
+ if (aidlen == 2) {\r
+ uint16_t aaid = (aid[0] << 8) + aid[1];\r
+ PrintAndLogEx(NORMAL, "\n-------------- AID 0x%04x ---------------", aaid);\r
+\r
+ uint16_t mad[7 + 8 + 8 + 8 + 8] = {0};\r
+ size_t madlen = 0;\r
+ if (MADDecode(sector0, sector10, mad, &madlen)) {\r
+ PrintAndLogEx(ERR, "can't decode mad.");\r
+ return 10;\r
+ }\r
+\r
+ uint8_t akey[6] = {0};\r
+ memcpy(akey, g_mifare_ndef_key, 6);\r
+ if (keylen == 6) {\r
+ memcpy(akey, key, 6);\r
+ }\r
+\r
+ for (int i = 0; i < madlen; i++) {\r
+ if (aaid == mad[i]) {\r
+ uint8_t vsector[16 * 4] = {0};\r
+ if (mfReadSector(i + 1, keyB ? MF_KEY_B : MF_KEY_A, akey, vsector)) {\r
+ PrintAndLogEx(NORMAL, "");\r
+ PrintAndLogEx(ERR, "read sector %d error.", i + 1);\r
+ return 2;\r
+ }\r
+\r
+ for (int j = 0; j < (verbose ? 4 : 3); j ++)\r
+ PrintAndLogEx(NORMAL, " [%03d] %s", (i + 1) * 4 + j, sprint_hex(&vsector[j * 16], 16));\r
+ }\r
+ }\r
+ }\r
+\r
+ return 0;\r
+}\r
+\r
+int CmdHFMFNDEF(const char *cmd) {\r
+\r
+ CLIParserInit("hf mf ndef",\r
+ "Prints NFC Data Exchange Format (NDEF)",\r
+ "Usage:\n\thf mf ndef -> shows NDEF data\n"\r
+ "\thf mf ndef -a 03e1 -k ffffffffffff -b -> shows NDEF data with custom AID, key and with key B\n");\r
+\r
+ void *argtable[] = {\r
+ arg_param_begin,\r
+ arg_litn("vV", "verbose", 0, 2, "show technical data"),\r
+ arg_str0("aA", "aid", "replace default aid for NDEF", NULL),\r
+ arg_str0("kK", "key", "replace default key for NDEF", NULL),\r
+ arg_lit0("bB", "keyb", "use key B for access sectors (by default: key A)"),\r
+ arg_param_end\r
+ };\r
+ CLIExecWithReturn(cmd, argtable, true);\r
+\r
+ bool verbose = arg_get_lit(1);\r
+ bool verbose2 = arg_get_lit(1) > 1;\r
+ uint8_t aid[2] = {0};\r
+ int aidlen;\r
+ CLIGetHexWithReturn(2, aid, &aidlen);\r
+ uint8_t key[6] = {0};\r
+ int keylen;\r
+ CLIGetHexWithReturn(3, key, &keylen);\r
+ bool keyB = arg_get_lit(4);\r
+\r
+ CLIParserFree();\r
+\r
+ uint16_t ndefAID = 0x03e1;\r
+ if (aidlen == 2)\r
+ ndefAID = (aid[0] << 8) + aid[1];\r
+\r
+ uint8_t ndefkey[6] = {0};\r
+ memcpy(ndefkey, g_mifare_ndef_key, 6);\r
+ if (keylen == 6) {\r
+ memcpy(ndefkey, key, 6);\r
+ }\r
+\r
+ uint8_t sector0[16 * 4] = {0};\r
+ uint8_t sector10[16 * 4] = {0};\r
+ uint8_t data[4096] = {0};\r
+ int datalen = 0;\r
+\r
+ PrintAndLogEx(NORMAL, "");\r
+\r
+ if (mfReadSector(MF_MAD1_SECTOR, MF_KEY_A, (uint8_t *)g_mifare_mad_key, sector0)) {\r
+ PrintAndLogEx(ERR, "read sector 0 error. card don't have MAD or don't have MAD on default keys.");\r
+ return 2;\r
+ }\r
+\r
+ bool haveMAD2 = false;\r
+ int res = MADCheck(sector0, NULL, verbose, &haveMAD2);\r
+ if (res) {\r
+ PrintAndLogEx(ERR, "MAD error %d.", res);\r
+ return res;\r
+ }\r
+\r
+ if (haveMAD2) {\r
+ if (mfReadSector(MF_MAD2_SECTOR, MF_KEY_A, (uint8_t *)g_mifare_mad_key, sector10)) {\r
+ PrintAndLogEx(ERR, "read sector 0x10 error. card don't have MAD or don't have MAD on default keys.");\r
+ return 2;\r
+ }\r
+ }\r
+\r
+ uint16_t mad[7 + 8 + 8 + 8 + 8] = {0};\r
+ size_t madlen = 0;\r
+ if (MADDecode(sector0, (haveMAD2 ? sector10 : NULL), mad, &madlen)) {\r
+ PrintAndLogEx(ERR, "can't decode mad.");\r
+ return 10;\r
+ }\r
+\r
+ printf("data reading:");\r
+ for (int i = 0; i < madlen; i++) {\r
+ if (ndefAID == mad[i]) {\r
+ uint8_t vsector[16 * 4] = {0};\r
+ if (mfReadSector(i + 1, keyB ? MF_KEY_B : MF_KEY_A, ndefkey, vsector)) {\r
+ PrintAndLogEx(ERR, "read sector %d error.", i + 1);\r
+ return 2;\r
+ }\r
+\r
+ memcpy(&data[datalen], vsector, 16 * 3);\r
+ datalen += 16 * 3;\r
+\r
+ printf(".");\r
+ }\r
+ }\r
+ printf(" OK\n");\r
+\r
+ if (!datalen) {\r
+ PrintAndLogEx(ERR, "no NDEF data.");\r
+ return 11;\r
+ }\r
+\r
+ if (verbose2) {\r
+ PrintAndLogEx(NORMAL, "NDEF data:");\r
+ dump_buffer(data, datalen, stdout, 1);\r
+ }\r
+\r
+ NDEFDecodeAndPrint(data, datalen, verbose);\r
+\r
+ return 0;\r
+}\r
+\r
+int CmdHFMFPersonalize(const char *cmd) {\r
+\r
+ CLIParserInit("hf mf personalize",\r
+ "Personalize the UID of a Mifare Classic EV1 card. This is only possible if it is a 7Byte UID card and if it is not already personalized.",\r
+ "Usage:\n\thf mf personalize UIDF0 -> double size UID according to ISO/IEC14443-3\n"\r
+ "\thf mf personalize UIDF1 -> double size UID according to ISO/IEC14443-3, optional usage of selection process shortcut\n"\r
+ "\thf mf personalize UIDF2 -> single size random ID according to ISO/IEC14443-3\n"\r
+ "\thf mf personalize UIDF3 -> single size NUID according to ISO/IEC14443-3\n"\r
+ "\thf mf personalize -t B -k B0B1B2B3B4B5 UIDF3 -> use key B = 0xB0B1B2B3B4B5 instead of default key A\n");\r
+\r
+ void *argtable[] = {\r
+ arg_param_begin,\r
+ arg_str0("tT", "keytype", "<A|B>", "key type (A or B) to authenticate sector 0 (default: A)"),\r
+ arg_str0("kK", "key", "<key (hex 6 Bytes)>", "key to authenticate sector 0 (default: FFFFFFFFFFFF)"),\r
+ arg_str1(NULL, NULL, "<UIDF0|UIDF1|UIDF2|UIDF3>", "Personalization Option"),\r
+ arg_param_end\r
+ };\r
+ CLIExecWithReturn(cmd, argtable, true);\r
+\r
+ char keytypestr[2] = "A";\r
+ uint8_t keytype = 0x00;\r
+ int keytypestr_len;\r
+ int res = CLIParamStrToBuf(arg_get_str(1), (uint8_t*)keytypestr, 1, &keytypestr_len);\r
+ if (res || (keytypestr[0] != 'a' && keytypestr[0] != 'A' && keytypestr[0] != 'b' && keytypestr[0] != 'B')) {\r
+ PrintAndLog("ERROR: not a valid key type. Key type must be A or B");\r
+ CLIParserFree();\r
+ return 1;\r
+ }\r
+ if (keytypestr[0] == 'B' || keytypestr[0] == 'b') {\r
+ keytype = 0x01;\r
+ }\r
+\r
+ uint8_t key[6] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};\r
+ int key_len;\r
+ res = CLIParamHexToBuf(arg_get_str(2), key, 6, &key_len);\r
+ if (res || (!res && key_len > 0 && key_len != 6)) {\r
+ PrintAndLog("ERROR: not a valid key. Key must be 12 hex digits");\r
+ CLIParserFree();\r
+ return 1;\r
+ }\r
+\r
+ char pers_optionstr[6];\r
+ int opt_len;\r
+ uint8_t pers_option;\r
+ res = CLIParamStrToBuf(arg_get_str(3), (uint8_t*)pers_optionstr, 5, &opt_len);\r
+ if (res || (!res && opt_len > 0 && opt_len != 5)\r
+ || (strncmp(pers_optionstr, "UIDF0", 5) && strncmp(pers_optionstr, "UIDF1", 5) && strncmp(pers_optionstr, "UIDF2", 5) && strncmp(pers_optionstr, "UIDF3", 5))) {\r
+ PrintAndLog("ERROR: invalid personalization option. Must be one of UIDF0, UIDF1, UIDF2, or UIDF3");\r
+ CLIParserFree();\r
+ return 1;\r
+ }\r
+ if (!strncmp(pers_optionstr, "UIDF0", 5)) {\r
+ pers_option = MIFARE_EV1_UIDF0;\r
+ } else if (!strncmp(pers_optionstr, "UIDF1", 5)) {\r
+ pers_option = MIFARE_EV1_UIDF1;\r
+ } else if (!strncmp(pers_optionstr, "UIDF2", 5)) {\r
+ pers_option = MIFARE_EV1_UIDF2;\r
+ } else {\r
+ pers_option = MIFARE_EV1_UIDF3;\r
+ }\r
+\r
+ CLIParserFree();\r
+\r
+ UsbCommand c = {CMD_MIFARE_PERSONALIZE_UID, {keytype, pers_option, 0}};\r
+ memcpy(c.d.asBytes, key, 6);\r
+ SendCommand(&c);\r
+\r
+ UsbCommand resp;\r
+ if (WaitForResponseTimeout(CMD_ACK, &resp, 1500)) {\r
+ uint8_t isOK = resp.arg[0] & 0xff;\r
+ PrintAndLog("Personalization %s", isOK ? "FAILED" : "SUCCEEDED");\r
+ } else {\r
+ PrintAndLog("Command execute timeout");\r
+ }\r
+\r
+ return 0;\r
+}\r
+\r
+\r
+static command_t CommandTable[] = {\r
+ {"help", CmdHelp, 1, "This help"},\r
+ {"dbg", CmdHF14AMfDbg, 0, "Set default debug mode"},\r
+ {"rdbl", CmdHF14AMfRdBl, 0, "Read MIFARE classic block"},\r
+ {"rdsc", CmdHF14AMfRdSc, 0, "Read MIFARE classic sector"},\r
+ {"dump", CmdHF14AMfDump, 0, "Dump MIFARE classic tag to binary file"},\r
+ {"restore", CmdHF14AMfRestore, 0, "Restore MIFARE classic binary file to BLANK tag"},\r
+ {"wrbl", CmdHF14AMfWrBl, 0, "Write MIFARE classic block"},\r
+ {"auth4", CmdHF14AMfAuth4, 0, "ISO14443-4 AES authentication"},\r
+ {"chk", CmdHF14AMfChk, 0, "Test block keys"},\r
+ {"mifare", CmdHF14AMifare, 0, "Read parity error messages."},\r
+ {"hardnested", CmdHF14AMfNestedHard, 0, "Nested attack for hardened Mifare cards"},\r
+ {"nested", CmdHF14AMfNested, 0, "Test nested authentication"},\r
+ {"sniff", CmdHF14AMfSniff, 0, "Sniff card-reader communication"},\r
+ {"sim", CmdHF14AMfSim, 0, "Simulate MIFARE card"},\r
+ {"eclr", CmdHF14AMfEClear, 0, "Clear simulator memory"},\r
+ {"eget", CmdHF14AMfEGet, 0, "Get simulator memory block"},\r
+ {"eset", CmdHF14AMfESet, 0, "Set simulator memory block"},\r
+ {"eload", CmdHF14AMfELoad, 0, "Load from file emul dump"},\r
+ {"esave", CmdHF14AMfESave, 0, "Save to file emul dump"},\r
+ {"ecfill", CmdHF14AMfECFill, 0, "Fill simulator memory with help of keys from simulator"},\r
+ {"ekeyprn", CmdHF14AMfEKeyPrn, 0, "Print keys from simulator memory"},\r
+ {"cwipe", CmdHF14AMfCWipe, 0, "Wipe magic Chinese card"},\r
+ {"csetuid", CmdHF14AMfCSetUID, 0, "Set UID for magic Chinese card"},\r
+ {"csetblk", CmdHF14AMfCSetBlk, 0, "Write block - Magic Chinese card"},\r
+ {"cgetblk", CmdHF14AMfCGetBlk, 0, "Read block - Magic Chinese card"},\r
+ {"cgetsc", CmdHF14AMfCGetSc, 0, "Read sector - Magic Chinese card"},\r
+ {"cload", CmdHF14AMfCLoad, 0, "Load dump into magic Chinese card"},\r
+ {"csave", CmdHF14AMfCSave, 0, "Save dump from magic Chinese card into file or emulator"},\r
+ {"decrypt", CmdDecryptTraceCmds, 1, "[nt] [ar_enc] [at_enc] [data] - to decrypt snoop or trace"},\r
+ {"mad", CmdHF14AMfMAD, 0, "Checks and prints MAD"},\r
+ {"ndef", CmdHFMFNDEF, 0, "Prints NDEF records from card"},\r
+ {"personalize", CmdHFMFPersonalize, 0, "Personalize UID (Mifare Classic EV1 only)"},\r
+ {NULL, NULL, 0, NULL}\r
};\r
\r
-int CmdHFMF(const char *Cmd)\r
-{\r
- // flush\r
- WaitForResponseTimeout(CMD_ACK,NULL,100);\r
\r
- CmdsParse(CommandTable, Cmd);\r
- return 0;\r
+int CmdHFMF(const char *Cmd) {\r
+ (void)WaitForResponseTimeout(CMD_ACK,NULL,100);\r
+ CmdsParse(CommandTable, Cmd);\r
+ return 0;\r
}\r
\r
-int CmdHelp(const char *Cmd)\r
-{\r
- CmdsHelp(CommandTable);\r
- return 0;\r
+\r
+int CmdHelp(const char *Cmd) {\r
+ CmdsHelp(CommandTable);\r
+ return 0;\r
}\r
projects / proxmark3-svn / blobdiff