void printConfig()
{
- Dbprintf("Sampling config: ");
+ Dbprintf("LF Sampling config: ");
Dbprintf(" [q] divisor: %d ", config.divisor);
Dbprintf(" [b] bps: %d ", config.bits_per_sample);
Dbprintf(" [d] decimation: %d ", config.decimation);
FpgaSetupSsc();
}
-
/**
* Does the sample acquisition. If threshold is specified, the actual sampling
* is not commenced until the threshold has been reached.
* @param silent - is true, now outputs are made. If false, dbprints the status
* @return the number of bits occupied by the samples.
*/
-
-uint32_t DoAcquisition(uint8_t decimation, uint32_t bits_per_sample, bool averaging, int trigger_threshold,bool silent)
+uint32_t DoAcquisition(uint8_t decimation, uint32_t bits_per_sample, bool averaging, int trigger_threshold, bool silent)
{
//.
uint8_t *dest = BigBuf_get_addr();
if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
sample = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
LED_D_OFF();
- if (trigger_threshold > 0 && sample < trigger_threshold)
+ // threshold either high or low values 128 = center 0. if trigger = 178
+ if ((trigger_threshold > 0) && (sample < (trigger_threshold+128)) && (sample > (128-trigger_threshold))) //
continue;
-
+
trigger_threshold = 0;
sample_total_numbers++;
{
return ReadLF(false, true);
}
+
+/**
+* acquisition of T55x7 LF signal. Similart to other LF, but adjusted with @marshmellows thresholds
+* the data is collected in BigBuf.
+**/
+void doT55x7Acquisition(size_t sample_size) {
+
+ #define T55xx_READ_UPPER_THRESHOLD 128+40 // 40 grph
+ #define T55xx_READ_TOL 5
+
+ uint8_t *dest = BigBuf_get_addr();
+ uint16_t bufsize = BigBuf_max_traceLen();
+
+ if ( bufsize > sample_size )
+ bufsize = sample_size;
+
+ uint16_t i = 0;
+ bool startFound = false;
+ bool highFound = false;
+ uint8_t curSample = 0;
+ uint8_t lastSample = 0;
+ uint16_t skipCnt = 0;
+ while(!BUTTON_PRESS() && skipCnt<1000) {
+ WDT_HIT();
+ if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
+ AT91C_BASE_SSC->SSC_THR = 0x43;
+ LED_D_ON();
+ }
+ if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
+ curSample = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
+ LED_D_OFF();
+
+ // skip until the first high sample above threshold
+ if (!startFound && curSample > T55xx_READ_UPPER_THRESHOLD) {
+ if (curSample > lastSample)
+ lastSample = curSample;
+ highFound = true;
+ } else if (!highFound) {
+ skipCnt++;
+ continue;
+ }
+ // skip until first high samples begin to change
+ if (startFound || curSample < T55xx_READ_UPPER_THRESHOLD-T55xx_READ_TOL){
+ // if just found start - recover last sample
+ if (!startFound) {
+ dest[i++] = lastSample;
+ startFound = true;
+ }
+ // collect samples
+ dest[i++] = curSample;
+ if (i >= bufsize-1) break;
+ }
+ }
+ }
+}