return 0;
}
-
-//by marshmellow
-//takes 1s and 0s and searches for EM410x format - output EM ID
-uint64_t Em410xDecodeOld(uint8_t *BitStream, size_t *size, size_t *startIdx)
-{
- //no arguments needed - built this way in case we want this to be a direct call from "data " cmds in the future
- // otherwise could be a void with no arguments
- //set defaults
- uint64_t lo=0;
- uint32_t i = 0;
- if (BitStream[1]>1){ //allow only 1s and 0s
- // PrintAndLog("no data found");
- return 0;
- }
- // 111111111 bit pattern represent start of frame
- uint8_t preamble[] = {1,1,1,1,1,1,1,1,1};
- uint32_t idx = 0;
- uint32_t parityBits = 0;
- uint8_t errChk = 0;
- *startIdx = 0;
- for (uint8_t extraBitChk=0; extraBitChk<5; extraBitChk++){
- errChk = preambleSearch(BitStream+extraBitChk+*startIdx, preamble, sizeof(preamble), size, startIdx);
- if (errChk == 0) return 0;
- idx = *startIdx + 9;
- for (i=0; i<10;i++){ //loop through 10 sets of 5 bits (50-10p = 40 bits)
- parityBits = bytebits_to_byte(BitStream+(i*5)+idx,5);
- //check even parity
- if (parityTest(parityBits, 5, 0) == 0){
- //parity failed try next bit (in the case of 1111111111) but last 9 = preamble
- startIdx++;
- errChk = 0;
- break;
- }
- //set uint64 with ID from BitStream
- for (uint8_t ii=0; ii<4; ii++){
- lo = (lo << 1LL) | (BitStream[(i*5)+ii+idx]);
- }
- }
- if (errChk != 0) return lo;
- //skip last 5 bit parity test for simplicity.
- // *size = 64;
- }
- return 0;
-}
-
//by marshmellow
//takes 1s and 0s and searches for EM410x format - output EM ID
uint8_t Em410xDecode(uint8_t *BitStream, size_t *size, size_t *startIdx, uint32_t *hi, uint64_t *lo)
errChk = preambleSearch(BitStream+extraBitChk+*startIdx, preamble, sizeof(preamble), size, startIdx);
if (errChk == 0) return 0;
if (*size>64) FmtLen = 22;
+ if (*size<64) return 0;
idx = *startIdx + 9;
for (i=0; i<FmtLen; i++){ //loop through 10 or 22 sets of 5 bits (50-10p = 40 bits or 88 bits)
parityBits = bytebits_to_byte(BitStream+(i*5)+idx,5);
//run through 2 times and take least errCnt
int manrawdecode(uint8_t * BitStream, size_t *size)
{
- uint16_t bitnum=0;
- uint16_t MaxBits = 500;
- uint16_t errCnt = 0;
- size_t i=1;
- uint16_t bestErr = 1000;
- uint16_t bestRun = 0;
- size_t ii=1;
+ uint16_t bitnum=0, MaxBits = 512, errCnt = 0;
+ size_t i, ii;
+ uint16_t bestErr = 1000, bestRun = 0;
if (size == 0) return -1;
- for (ii=1;ii<3;++ii){
- i=1;
+ for (ii=0;ii<2;++ii){
+ i=0;
for (i=i+ii;i<*size-2;i+=2){
if(BitStream[i]==1 && (BitStream[i+1]==0)){
} else if((BitStream[i]==0)&& BitStream[i+1]==1){
errCnt=bestErr;
if (errCnt<20){
ii=bestRun;
- i=1;
+ i=0;
for (i=i+ii; i < *size-2; i+=2){
if(BitStream[i] == 1 && (BitStream[i+1] == 0)){
BitStream[bitnum++]=0;
//by marshmellow
//take 01 or 10 = 1 and 11 or 00 = 0
//check for phase errors - should never have 111 or 000 should be 01001011 or 10110100 for 1010
+//decodes biphase or if inverted it is AKA conditional dephase encoding AKA differential manchester encoding
int BiphaseRawDecode(uint8_t *BitStream, size_t *size, int offset, int invert)
{
uint16_t bitnum=0;
if (!offsetA && offsetB) offset++;
for (i=offset; i<*size-3; i+=2){
//check for phase error
- if (i<*size-3 && BitStream[i+1]==BitStream[i+2]) {
+ if (BitStream[i+1]==BitStream[i+2]) {
BitStream[bitnum++]=77;
errCnt++;
}
return;
}
+int cleanAskRawDemod(uint8_t *BinStream, size_t *size, int clk, int invert, int high, int low)
+{
+ size_t bitCnt=0, smplCnt=0, errCnt=0;
+ uint8_t waveHigh = 0;
+ //PrintAndLog("clk: %d", clk);
+ for (size_t i=0; i < *size; i++){
+ if (BinStream[i] >= high && waveHigh){
+ smplCnt++;
+ } else if (BinStream[i] <= low && !waveHigh){
+ smplCnt++;
+ } else { //not high or low or a transition
+ if (smplCnt > clk-(clk/4)) { //full clock
+ if (smplCnt > clk + (clk/4)) { //too many samples
+ errCnt++;
+ BinStream[bitCnt++]=77;
+ } else if (waveHigh) {
+ BinStream[bitCnt++] = invert;
+ BinStream[bitCnt++] = invert;
+ } else if (!waveHigh) {
+ BinStream[bitCnt++] = invert ^ 1;
+ BinStream[bitCnt++] = invert ^ 1;
+ }
+ waveHigh ^= 1;
+ smplCnt = 0;
+ } else if (smplCnt > (clk/2) - (clk/5)) {
+ if (waveHigh) {
+ BinStream[bitCnt++] = invert;
+ } else if (!waveHigh) {
+ BinStream[bitCnt++] = invert ^ 1;
+ }
+ waveHigh ^= 1;
+ smplCnt = 0;
+ } else if (!bitCnt) {
+ //first bit
+ waveHigh = (BinStream[i] >= high);
+ smplCnt = 1;
+ } else {
+ //transition bit? ignore
+ }
+ }
+ }
+ *size = bitCnt;
+ return errCnt;
+}
+
//by marshmellow
//takes 3 arguments - clock, invert and maxErr as integers
//attempts to demodulate ask only
if (*clk==0) return -1;
if (start<0) return -1;
if (*invert != 0 && *invert != 1) *invert =0;
+ if (amp==1) askAmp(BinStream, *size);
+
uint32_t initLoopMax = 200;
if (initLoopMax > *size) initLoopMax=*size;
// Detect high and lows
- //25% fuzz in case highs and lows aren't clipped [marshmellow]
+ //25% clip in case highs and lows aren't clipped [marshmellow]
+ uint8_t clip = 75;
int high, low, ans;
- if (amp==1) askAmp(BinStream, *size);
- ans = getHiLo(BinStream, initLoopMax, &high, &low, 75, 75);
+ ans = getHiLo(BinStream, initLoopMax, &high, &low, clip, clip);
if (ans<1) return -1; //just noise
+ if (DetectCleanAskWave(BinStream, *size, high, low)) {
+ //PrintAndLog("Clean");
+ return cleanAskRawDemod(BinStream, size, *clk, *invert, high, low);
+ }
+
//PrintAndLog("DEBUG - valid high: %d - valid low: %d",high,low);
int lastBit = 0; //set first clock check
uint32_t bitnum = 0; //output counter
uint32_t gLen = *size;
if (gLen > 500) gLen=500;
//if 0 errors allowed then only try first 2 clock cycles as we want a low tolerance
- if (!maxErr) gLen=*clk*2;
+ if (!maxErr) gLen = *clk * 2;
uint8_t errCnt =0;
uint32_t bestStart = *size;
uint32_t bestErrCnt = maxErr; //(*size/1000);
uint8_t midBit=0;
uint16_t MaxBits=1000;
+
//PrintAndLog("DEBUG - lastbit - %d",lastBit);
//loop to find first wave that works
for (iii=start; iii < gLen; ++iii){
//do nothing with extra garbage
} else if ((idx-last_transition) < (fchigh-1)) { //6-8 = 8 waves
dest[numBits]=1;
- } else { //9+ = 10 waves
+ } else if ((idx-last_transition) > (fchigh+1) && !numBits) { //12 + and first bit = garbage
+ //do nothing with beginning garbage
+ } else { //9+ = 10 waves
dest[numBits]=0;
}
last_transition = idx;
uint32_t idx=0;
size_t numBits=0;
uint32_t n=1;
-
+ float lowWaves = (((float)(rfLen))/((float)fclow));
+ float highWaves = (((float)(rfLen))/((float)fchigh));
for( idx=1; idx < size; idx++) {
if (dest[idx]==lastval) {
n++;
continue;
}
+ n++;
//if lastval was 1, we have a 1->0 crossing
- if ( dest[idx-1]==1 ) {
- n=myround2((float)(n+1)/((float)(rfLen)/(float)fclow));
- } else {// 0->1 crossing
- n=myround2((float)(n+1)/((float)(rfLen-1)/(float)fchigh)); //-1 for fudge factor
+ if (dest[idx-1]==1) {
+ if (!numBits && n < (uint8_t)lowWaves) {
+ n=0;
+ lastval = dest[idx];
+ continue;
+ }
+ n=myround2(((float)n)/lowWaves);
+ } else {// 0->1 crossing
+ //test first bitsample too small
+ if (!numBits && n < (uint8_t)highWaves) {
+ n=0;
+ lastval = dest[idx];
+ continue;
+ }
+ n = myround2(((float)n)/highWaves); //-1 for fudge factor
}
if (n == 0) n = 1;
n=0;
lastval=dest[idx];
}//end for
+
+ // if valid extra bits at the end were all the same frequency - add them in
+ if (n > lowWaves && n > highWaves) {
+ if (dest[idx-2]==1) {
+ n=myround2((float)(n+1)/((float)(rfLen)/(float)fclow));
+ } else {
+ n=myround2((float)(n+1)/((float)(rfLen-1)/(float)fchigh)); //-1 for fudge factor
+ }
+ memset(dest, dest[idx-1]^invert , n);
+ numBits += n;
+ }
return numBits;
}
//by marshmellow (from holiman's base)
{
uint8_t allPeaks=1;
uint16_t cntPeaks=0;
- for (size_t i=20; i<255; i++){
+ for (size_t i=30; i<255; i++){
if (dest[i]>low && dest[i]<high)
allPeaks=0;
else
cntPeaks++;
}
if (allPeaks==0){
- if (cntPeaks>190) return 1;
+ if (cntPeaks>210) return 1;
}
return allPeaks;
}
+int DetectStrongAskClock(uint8_t dest[], size_t size)
+{
+ int clk[]={0,8,16,32,40,50,64,100,128,256};
+ size_t idx = 40;
+ uint8_t high=0;
+ size_t cnt = 0;
+ size_t highCnt = 0;
+ size_t highCnt2 = 0;
+ for (;idx < size; idx++){
+ if (dest[idx]>128) {
+ if (!high){
+ high=1;
+ if (cnt > highCnt){
+ if (highCnt != 0) highCnt2 = highCnt;
+ highCnt = cnt;
+ } else if (cnt > highCnt2) {
+ highCnt2 = cnt;
+ }
+ cnt=1;
+ } else {
+ cnt++;
+ }
+ } else if (dest[idx] <= 128){
+ if (high) {
+ high=0;
+ if (cnt > highCnt) {
+ if (highCnt != 0) highCnt2 = highCnt;
+ highCnt = cnt;
+ } else if (cnt > highCnt2) {
+ highCnt2 = cnt;
+ }
+ cnt=1;
+ } else {
+ cnt++;
+ }
+ }
+ }
+ for (idx=8; idx>0; idx--){
+ if (clk[idx] >= highCnt && clk[idx] <= highCnt+2)
+ return clk[idx];
+ if (clk[idx] >= highCnt2 && clk[idx] <= highCnt2+2)
+ return clk[idx];
+ }
+ return -1;
+}
+
// by marshmellow
// not perfect especially with lower clocks or VERY good antennas (heavy wave clipping)
// maybe somehow adjust peak trimming value based on samples to fix?
//test for large clean peaks
if (DetectCleanAskWave(dest, size, peak, low)==1){
- uint16_t fcTest=0;
- uint8_t mostFC=0;
- fcTest=countFC(dest, size, &mostFC);
- uint8_t fc1 = fcTest >> 8;
- uint8_t fc2 = fcTest & 0xFF;
-
- for (i=0; i<8; i++){
- if (clk[i] == fc1) {
- *clock=fc1;
- return 0;
- }
- if (clk[i] == fc2) {
- *clock=fc2;
+ int ans = DetectStrongAskClock(dest, size);
+ for (i=7; i>0; i--){
+ if (clk[i] == ans) {
+ *clock=ans;
return 0;
}
}
}
-
int ii;
int clkCnt;
int tol = 0;
}else{
tol=0;
}
+ if (!maxErr) loopCnt=clk[clkCnt]*2;
bestErr[clkCnt]=1000;
//try lining up the peaks by moving starting point (try first 256)
for (ii=0; ii < loopCnt; ii++){
*clk = DetectNRZClock(dest, *size, *clk);
if (*clk==0) return -2;
uint32_t i;
- int high, low, ans;
- ans = getHiLo(dest, 1260, &high, &low, 75, 75); //25% fuzz on high 25% fuzz on low
- if (ans<1) return -2; //just noise
- uint32_t gLen = 256;
+ uint32_t gLen = 4096;
if (gLen>*size) gLen = *size;
+ int high, low;
+ if (getHiLo(dest, gLen, &high, &low, 75, 75) < 1) return -3; //25% fuzz on high 25% fuzz on low
int lastBit = 0; //set first clock check
uint32_t bitnum = 0; //output counter
uint8_t tol = 1; //clock tolerance adjust - waves will be accepted as within the clock if they fall + or - this value + clock from last valid wave
uint32_t bestErrCnt = maxErr+1;
uint32_t bestPeakCnt = 0;
uint32_t bestPeakStart=0;
+ uint8_t bestFirstPeakHigh=0;
+ uint8_t firstPeakHigh=0;
uint8_t curBit=0;
uint8_t bitHigh=0;
uint8_t errBitHigh=0;
//loop to find first wave that works - align to clock
for (iii=0; iii < gLen; ++iii){
if ((dest[iii]>=high) || (dest[iii]<=low)){
+ if (dest[iii]>=high) firstPeakHigh=1;
+ else firstPeakHigh=0;
lastBit=iii-*clk;
peakCnt=0;
errCnt=0;
//possible good read
if (errCnt == 0){
//bestStart = iii;
+ bestFirstPeakHigh=firstPeakHigh;
bestErrCnt = errCnt;
bestPeakCnt = peakCnt;
bestPeakStart = iii;
//bestStart = iii;
}
if (peakCnt > bestPeakCnt){
+ bestFirstPeakHigh=firstPeakHigh;
bestPeakCnt=peakCnt;
bestPeakStart=iii;
}
iii=bestPeakStart;
lastBit=bestPeakStart-*clk;
bitnum=0;
+ memset(dest, bestFirstPeakHigh^1, bestPeakStart / *clk);
+ bitnum += (bestPeakStart / *clk);
for (i = iii; i < *size; ++i) {
//if we found a high bar and we are at a clock bit
if ((dest[i] >= high ) && (i>=lastBit+*clk-tol && i<=lastBit+*clk+tol)){
*size=bitnum;
} else{
*size=bitnum;
- return -1;
+ return bestErrCnt;
}
if (bitnum>16){
*size=bitnum;
- } else return -1;
+ } else return -5;
return errCnt;
}
errCnt=0;
size_t numBits=0;
//set skipped bits
- memset(dest+numBits,curPhase^1,firstFullWave / *clock);
+ memset(dest,curPhase^1,firstFullWave / *clock);
numBits += (firstFullWave / *clock);
dest[numBits++] = curPhase; //set first read bit
for (i = firstFullWave+fullWaveLen-1; i < *size-3; i++){
projects / proxmark3-svn / blobdiff