tweaked sim command, added mfkey32

[proxmark3-svn] / armsrc / hitag2.c

diff --git a/armsrc/hitag2.c b/armsrc/hitag2.c
index 37eb211c821fec35f7bf82d19b0f127185dcb5bc..a2c1d82323ab7a65abb1f830a201926d5143cea5 100644 (file)
--- a/armsrc/hitag2.c
+++ b/armsrc/hitag2.c
@@ -27,6 +27,7 @@ static bool bQuiet;
 bool bCrypto;
 bool bAuthenticating;
 bool bPwd;
+bool bSuccessful;
 
 struct hitag2_tag {
        uint32_t uid;
@@ -477,8 +478,8 @@ bool hitag2_password(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen)
                                *txlen = 32;
                                memcpy(tx,password,4);
                                bPwd = true;
-                                memcpy(tag.sectors[blocknr],rx,4);
-                                blocknr++;
+        memcpy(tag.sectors[blocknr],rx,4);
+        blocknr++;
                        } else {
                                
                        if(blocknr == 1){
@@ -491,7 +492,7 @@ bool hitag2_password(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen)
                        blocknr++;
                        if (blocknr > 7) {
                          DbpString("Read succesful!");
-                         // We are done... for now
+        bSuccessful = true;
                          return false;
                        }
                        *txlen = 10;
@@ -523,11 +524,32 @@ bool hitag2_crypto(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
                case 0: {
                        // Stop if there is no answer while we are in crypto mode (after sending NrAr)
                        if (bCrypto) {
-                               DbpString("Authentication failed!");
-                               return false;
-                       }
-                       *txlen = 5;
-                       memcpy(tx,"\xc0",nbytes(*txlen));
+        // Failed during authentication
+        if (bAuthenticating) {
+          DbpString("Authentication failed!");
+          return false;
+        } else {
+          // Failed reading a block, could be (read/write) locked, skip block and re-authenticate
+          if (blocknr == 1) {
+            // Write the low part of the key in memory
+            memcpy(tag.sectors[1],key+2,4);
+          } else if (blocknr == 2) {
+            // Write the high part of the key in memory
+            tag.sectors[2][0] = 0x00;
+            tag.sectors[2][1] = 0x00;
+            tag.sectors[2][2] = key[0];
+            tag.sectors[2][3] = key[1];
+          } else {
+            // Just put zero's in the memory (of the unreadable block)
+            memset(tag.sectors[blocknr],0x00,4);
+          }
+          blocknr++;
+          bCrypto = false;
+        }
+                       } else {
+        *txlen = 5;
+        memcpy(tx,"\xc0",nbytes(*txlen));
+      }
                } break;
                        
       // Received UID, crypto tag answer
@@ -553,7 +575,7 @@ bool hitag2_crypto(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
         }
         if (blocknr > 7) {
           DbpString("Read succesful!");
-          // We are done... for now
+          bSuccessful = true;
           return false;
         }
         *txlen = 10;
@@ -1074,7 +1096,10 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) {
        int t_wait = HITAG_T_WAIT_MAX;
        bool bStop;
        bool bQuitTraceFull = false;
-       
+  
+  // Reset the return status
+  bSuccessful = false;
+  
        // Clean up trace and prepare it for storing frames
   iso14a_set_tracing(TRUE);
   iso14a_clear_trace();
@@ -1172,26 +1197,26 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) {
        lastbit = 1;
        bStop = false;
 
-       // Tag specific configuration settings (sof, timings, etc.)
-       if (htf < 10){
-               // hitagS settings
-               reset_sof = 1;
-               t_wait = 200;
-               DbpString("Configured for hitagS reader");
-       } else if (htf < 20) {
-               // hitag1 settings
-               reset_sof = 1;
-               t_wait = 200;
-               DbpString("Configured for hitag1 reader");
-       } else if (htf < 30) {
-               // hitag2 settings
-               reset_sof = 4;
-               t_wait = HITAG_T_WAIT_2;
-               DbpString("Configured for hitag2 reader");
+  // Tag specific configuration settings (sof, timings, etc.)
+  if (htf < 10){
+    // hitagS settings
+    reset_sof = 1;
+    t_wait = 200;
+    DbpString("Configured for hitagS reader");
+  } else if (htf < 20) {
+    // hitag1 settings
+    reset_sof = 1;
+    t_wait = 200;
+    DbpString("Configured for hitag1 reader");
+  } else if (htf < 30) {
+    // hitag2 settings
+    reset_sof = 4;
+    t_wait = HITAG_T_WAIT_2;
+    DbpString("Configured for hitag2 reader");
        } else {
-        Dbprintf("Error, unknown hitag reader type: %d",htf);
-        return;
-    }
+    Dbprintf("Error, unknown hitag reader type: %d",htf);
+    return;
+  }
                
        while(!bStop && !BUTTON_PRESS()) {
                // Watchdog hit
@@ -1336,7 +1361,7 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) {
        AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
        AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS;
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-       
-//     Dbprintf("frame received: %d",frame_count);
-//     DbpString("All done");
+       Dbprintf("frame received: %d",frame_count);
+  DbpString("All done");
+  cmd_send(CMD_ACK,bSuccessful,0,0,(byte_t*)tag.sectors,48);
 }