FIX: a shot at fixing the "_" underscore problem in fileutils.c. This one uses _ifde...

[proxmark3-svn] / armsrc / iso14443a.c

diff --git a/armsrc/iso14443a.c b/armsrc/iso14443a.c
index d8edc209803f017c15da7e7cf7ec6ddae9a8a75a..8399c6f84bb7e24eeeeee8258622dd7b60930d95 100644 (file)
--- a/armsrc/iso14443a.c
+++ b/armsrc/iso14443a.c
@@ -394,8 +394,12 @@ static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time)
                                } else if (Uart.len & 0x0007) {                 // there are some parity bits to store
                                        Uart.parityBits <<= (8 - (Uart.len & 0x0007)); // left align remaining parity bits
                                        Uart.parity[Uart.parityLen++] = Uart.parityBits; // and store them
                                } else if (Uart.len & 0x0007) {                 // there are some parity bits to store
                                        Uart.parityBits <<= (8 - (Uart.len & 0x0007)); // left align remaining parity bits
                                        Uart.parity[Uart.parityLen++] = Uart.parityBits; // and store them

-                                       return TRUE;                                            // we are finished with decoding the raw data sequence

                                        }
                                        }

+                                       if ( Uart.len) {
+                                       return TRUE;                                            // we are finished with decoding the raw data sequence
+                                       } else {
+                                               UartReset();                                    // Nothing receiver - start over
+                                       }                                       

                                }
                                if (Uart.state == STATE_START_OF_COMMUNICATION) {                               // error - must not follow directly after SOC
                                        UartReset();
                                }
                                if (Uart.state == STATE_START_OF_COMMUNICATION) {                               // error - must not follow directly after SOC
                                        UartReset();


@@ -556,6 +560,8 @@ static RAMFUNC int ManchesterDecoding(uint8_t bit, uint16_t offset, uint32_t non
                                        } else if (Demod.len & 0x0007) { // there are some parity bits to store
                                                Demod.parityBits <<= (8 - (Demod.len & 0x0007)); // left align remaining parity bits
                                                Demod.parity[Demod.parityLen++] = Demod.parityBits; // and store them
                                        } else if (Demod.len & 0x0007) { // there are some parity bits to store
                                                Demod.parityBits <<= (8 - (Demod.len & 0x0007)); // left align remaining parity bits
                                                Demod.parity[Demod.parityLen++] = Demod.parityBits; // and store them

+                                       }
+                                       if (Demod.len) {

                                        return TRUE; // we are finished with decoding the raw data sequence
                                } else {                                                                                                // nothing received. Start over
                                        DemodReset();
                                        return TRUE; // we are finished with decoding the raw data sequence
                                } else {                                                                                                // nothing received. Start over
                                        DemodReset();


@@ -1627,7 +1633,7 @@ bool EmLogTrace(uint8_t *reader_data, uint16_t reader_len, uint32_t reader_Start
 //-----------------------------------------------------------------------------
 static int GetIso14443aAnswerFromTag(uint8_t *receivedResponse, uint8_t *receivedResponsePar, uint16_t offset)
 {
 //-----------------------------------------------------------------------------
 static int GetIso14443aAnswerFromTag(uint8_t *receivedResponse, uint8_t *receivedResponsePar, uint16_t offset)
 {

-       uint16_t c;
+       uint32_t c;

        
        // Set FPGA mode to "reader listen mode", no modulation (listen
        // only, since we are receiving, not transmitting).
        
        // Set FPGA mode to "reader listen mode", no modulation (listen
        // only, since we are receiving, not transmitting).


@@ -1715,6 +1721,8 @@ int ReaderReceive(uint8_t *receivedAnswer, uint8_t *parity)
  * fills the uid pointer unless NULL
  * fills resp_data unless NULL */
 int iso14443a_select_card(byte_t* uid_ptr, iso14a_card_select_t* p_hi14a_card, uint32_t* cuid_ptr) {
  * fills the uid pointer unless NULL
  * fills resp_data unless NULL */
 int iso14443a_select_card(byte_t* uid_ptr, iso14a_card_select_t* p_hi14a_card, uint32_t* cuid_ptr) {

+       
+       //uint8_t deselect[]   = {0xc2};  //DESELECT

        //uint8_t halt[]       = { 0x50, 0x00, 0x57, 0xCD };  // HALT
        uint8_t wupa[]       = { 0x52 };  // WAKE-UP
        //uint8_t reqa[]       = { 0x26 };  // REQUEST A
        //uint8_t halt[]       = { 0x50, 0x00, 0x57, 0xCD };  // HALT
        uint8_t wupa[]       = { 0x52 };  // WAKE-UP
        //uint8_t reqa[]       = { 0x26 };  // REQUEST A


@@ -1728,11 +1736,11 @@ int iso14443a_select_card(byte_t* uid_ptr, iso14a_card_select_t* p_hi14a_card, u
        size_t uid_resp_len;
        uint8_t sak = 0x04; // cascade uid
        int cascade_level = 0;
        size_t uid_resp_len;
        uint8_t sak = 0x04; // cascade uid
        int cascade_level = 0;

-       int len;
+       int len =0;

        
        // test for the SKYLANDERS TOY.
        
        // test for the SKYLANDERS TOY.

-       //ReaderTransmit(halt,sizeof(halt), NULL);
-       //len = ReaderReceive(resp, resp_par);
+       // ReaderTransmit(deselect,sizeof(deselect), NULL);
+       // len = ReaderReceive(resp, resp_par);

        
        // Broadcast for a card, WUPA (0x52) will force response from all cards in the field
        ReaderTransmitBitsPar(wupa,7,0, NULL);
        
        // Broadcast for a card, WUPA (0x52) will force response from all cards in the field
        ReaderTransmitBitsPar(wupa,7,0, NULL);


@@ -1808,7 +1816,11 @@ int iso14443a_select_card(byte_t* uid_ptr, iso14a_card_select_t* p_hi14a_card, u
     ReaderTransmit(sel_uid,sizeof(sel_uid), NULL);
 
     // Receive the SAK
     ReaderTransmit(sel_uid,sizeof(sel_uid), NULL);
 
     // Receive the SAK

-    if (!ReaderReceive(resp, resp_par)) return 0;
+    if (!ReaderReceive(resp, resp_par)){
+               return 0;
+       }
+       
+       

     sak = resp[0];
        
     // Test if more parts of the uid are coming
     sak = resp[0];
        
     // Test if more parts of the uid are coming


@@ -1837,17 +1849,16 @@ int iso14443a_select_card(byte_t* uid_ptr, iso14a_card_select_t* p_hi14a_card, u
     p_hi14a_card->ats_len = 0;
   }
 
     p_hi14a_card->ats_len = 0;
   }
 

-       if( (sak & 0x20) == 0) {
-               return 2; // non iso14443a compliant tag
-       }
-
+       // non iso14443a compliant tag
+       if( (sak & 0x20) == 0) return 2; 
+       

        // Request for answer to select
        AppendCrc14443a(rats, 2);
        ReaderTransmit(rats, sizeof(rats), NULL);
        // Request for answer to select
        AppendCrc14443a(rats, 2);
        ReaderTransmit(rats, sizeof(rats), NULL);

+       
+       if (!(len = ReaderReceive(resp, resp_par))) return 0;

 
 

-       len = ReaderReceive(resp, resp_par);
-       if(!len) return 0;
-
+       

        if(p_hi14a_card) {
                memcpy(p_hi14a_card->ats, resp, sizeof(p_hi14a_card->ats));
                p_hi14a_card->ats_len = len;
        if(p_hi14a_card) {
                memcpy(p_hi14a_card->ats, resp, sizeof(p_hi14a_card->ats));
                p_hi14a_card->ats_len = len;