re-add piwi's trace memory fixes

[proxmark3-svn] / armsrc / hitag2.c

diff --git a/armsrc/hitag2.c b/armsrc/hitag2.c
index 4b173d6f223845620eeb47e96e35c89ffb78f628..719164d19e18b08c94b7f8f5839b8e2e86376502 100644 (file)
--- a/armsrc/hitag2.c
+++ b/armsrc/hitag2.c
@@ -710,22 +710,24 @@ void SnoopHitag(uint32_t type) {
        byte_t rx[HITAG_FRAME_LEN];
        size_t rxlen=0;
        
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+
+       // Clean up trace and prepare it for storing frames
+       set_tracing(TRUE);
+       clear_trace();
+       
        auth_table_len = 0;
        auth_table_pos = 0;
+
        BigBuf_free();
     auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH);
        memset(auth_table, 0x00, AUTH_TABLE_LENGTH);
 
-       // Clean up trace and prepare it for storing frames
-       set_tracing(TRUE);
-       clear_trace();
-       
        DbpString("Starting Hitag2 snoop");
        LED_D_ON();
        
        // Set up eavesdropping mode, frequency divisor which will drive the FPGA
        // and analog mux selection.
-       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT  | FPGA_LF_EDGE_DETECT_TOGGLE_MODE);
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
        SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
@@ -922,6 +924,12 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) {
        bool bQuitTraceFull = false;
        bQuiet = false;
        
+       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+
+       // Clean up trace and prepare it for storing frames
+       set_tracing(TRUE);
+       clear_trace();
+
        auth_table_len = 0;
        auth_table_pos = 0;
     byte_t* auth_table;
@@ -929,10 +937,6 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) {
     auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH);
        memset(auth_table, 0x00, AUTH_TABLE_LENGTH);
 
-       // Clean up trace and prepare it for storing frames
-       set_tracing(TRUE);
-       clear_trace();
-
        DbpString("Starting Hitag2 simulation");
        LED_D_ON();
        hitag2_init();
@@ -953,7 +957,6 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) {
        
        // Set up simulator mode, frequency divisor which will drive the FPGA
        // and analog mux selection.
-       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_READER_FIELD);
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
        SetAdcMuxFor(GPIO_MUXSEL_LOPKD);