// mode once it is configured.
//-----------------------------------------------------------------------------
+#include "fpgaloader.h"
+
#include <stdint.h>
#include <stddef.h>
#include <stdbool.h>
-#include "fpgaloader.h"
+#include "apps.h"
+#include "fpga.h"
#include "proxmark3.h"
#include "util.h"
#include "string.h"
#include "BigBuf.h"
#include "zlib.h"
-extern void Dbprintf(const char *fmt, ...);
-
// remember which version of the bitstream we have already downloaded to the FPGA
-static int downloaded_bitstream = FPGA_BITSTREAM_ERR;
+static int downloaded_bitstream = 0;
// this is where the bitstreams are located in memory:
-extern uint8_t _binary_fpga_lf_bit_start, _binary_fpga_lf_bit_end;
-extern uint8_t _binary_fpga_hf_bit_start, _binary_fpga_hf_bit_end;
+extern uint8_t _binary_obj_fpga_all_bit_z_start, _binary_obj_fpga_all_bit_z_end;
+
static uint8_t *fpga_image_ptr = NULL;
+static uint32_t uncompressed_bytes_cnt;
-static const uint8_t _bitparse_fixed_header[] = {0x00, 0x09, 0x0f, 0xf0, 0x0f, 0xf0, 0x0f, 0xf0, 0x0f, 0xf0, 0x00, 0x00, 0x01};
-#define FPGA_BITSTREAM_FIXED_HEADER_SIZE sizeof(_bitparse_fixed_header)
-#define OUTPUT_BUFFER_LEN 80
+#define OUTPUT_BUFFER_LEN 80
//-----------------------------------------------------------------------------
// Set up the Serial Peripheral Interface as master
// Disable PIO control of the following pins, allows use by the SPI peripheral
AT91C_BASE_PIOA->PIO_PDR =
- GPIO_NCS0 |
- GPIO_NCS2 |
- GPIO_MISO |
- GPIO_MOSI |
+ GPIO_NCS0 |
+ GPIO_NCS2 |
+ GPIO_MISO |
+ GPIO_MOSI |
GPIO_SPCK;
AT91C_BASE_PIOA->PIO_ASR =
- GPIO_NCS0 |
- GPIO_MISO |
- GPIO_MOSI |
+ GPIO_NCS0 |
+ GPIO_MISO |
+ GPIO_MOSI |
GPIO_SPCK;
AT91C_BASE_PIOA->PIO_BSR = GPIO_NCS2;
switch (mode) {
case SPI_FPGA_MODE:
AT91C_BASE_SPI->SPI_MR =
- ( 0 << 24) | // Delay between chip selects (take default: 6 MCK periods)
- (14 << 16) | // Peripheral Chip Select (selects FPGA SPI_NCS0 or PA11)
- ( 0 << 7) | // Local Loopback Disabled
- ( 1 << 4) | // Mode Fault Detection disabled
- ( 0 << 2) | // Chip selects connected directly to peripheral
- ( 0 << 1) | // Fixed Peripheral Select
- ( 1 << 0); // Master Mode
+ ( 0 << 24) | // Delay between chip selects (take default: 6 MCK periods)
+ (14 << 16) | // Peripheral Chip Select (selects FPGA SPI_NCS0 or PA11)
+ ( 0 << 7) | // Local Loopback Disabled
+ ( 1 << 4) | // Mode Fault Detection disabled
+ ( 0 << 2) | // Chip selects connected directly to peripheral
+ ( 0 << 1) | // Fixed Peripheral Select
+ ( 1 << 0); // Master Mode
AT91C_BASE_SPI->SPI_CSR[0] =
- ( 1 << 24) | // Delay between Consecutive Transfers (32 MCK periods)
- ( 1 << 16) | // Delay Before SPCK (1 MCK period)
- ( 6 << 8) | // Serial Clock Baud Rate (baudrate = MCK/6 = 24Mhz/6 = 4M baud
- ( 8 << 4) | // Bits per Transfer (16 bits)
- ( 0 << 3) | // Chip Select inactive after transfer
- ( 1 << 1) | // Clock Phase data captured on leading edge, changes on following edge
- ( 0 << 0); // Clock Polarity inactive state is logic 0
+ ( 1 << 24) | // Delay between Consecutive Transfers (32 MCK periods)
+ ( 1 << 16) | // Delay Before SPCK (1 MCK period)
+ ( 6 << 8) | // Serial Clock Baud Rate (baudrate = MCK/6 = 24Mhz/6 = 4M baud
+ ( 8 << 4) | // Bits per Transfer (16 bits)
+ ( 0 << 3) | // Chip Select inactive after transfer
+ ( 1 << 1) | // Clock Phase data captured on leading edge, changes on following edge
+ ( 0 << 0); // Clock Polarity inactive state is logic 0
break;
case SPI_LCD_MODE:
AT91C_BASE_SPI->SPI_MR =
- ( 0 << 24) | // Delay between chip selects (take default: 6 MCK periods)
- (11 << 16) | // Peripheral Chip Select (selects LCD SPI_NCS2 or PA10)
- ( 0 << 7) | // Local Loopback Disabled
- ( 1 << 4) | // Mode Fault Detection disabled
- ( 0 << 2) | // Chip selects connected directly to peripheral
- ( 0 << 1) | // Fixed Peripheral Select
- ( 1 << 0); // Master Mode
+ ( 0 << 24) | // Delay between chip selects (take default: 6 MCK periods)
+ (11 << 16) | // Peripheral Chip Select (selects LCD SPI_NCS2 or PA10)
+ ( 0 << 7) | // Local Loopback Disabled
+ ( 1 << 4) | // Mode Fault Detection disabled
+ ( 0 << 2) | // Chip selects connected directly to peripheral
+ ( 0 << 1) | // Fixed Peripheral Select
+ ( 1 << 0); // Master Mode
AT91C_BASE_SPI->SPI_CSR[2] =
- ( 1 << 24) | // Delay between Consecutive Transfers (32 MCK periods)
- ( 1 << 16) | // Delay Before SPCK (1 MCK period)
- ( 6 << 8) | // Serial Clock Baud Rate (baudrate = MCK/6 = 24Mhz/6 = 4M baud
- ( 1 << 4) | // Bits per Transfer (9 bits)
- ( 0 << 3) | // Chip Select inactive after transfer
- ( 1 << 1) | // Clock Phase data captured on leading edge, changes on following edge
- ( 0 << 0); // Clock Polarity inactive state is logic 0
+ ( 1 << 24) | // Delay between Consecutive Transfers (32 MCK periods)
+ ( 1 << 16) | // Delay Before SPCK (1 MCK period)
+ ( 6 << 8) | // Serial Clock Baud Rate (baudrate = MCK/6 = 24Mhz/6 = 4M baud
+ ( 1 << 4) | // Bits per Transfer (9 bits)
+ ( 0 << 3) | // Chip Select inactive after transfer
+ ( 1 << 1) | // Clock Phase data captured on leading edge, changes on following edge
+ ( 0 << 0); // Clock Polarity inactive state is logic 0
break;
- default: // Disable SPI
+ default: // Disable SPI
AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIDIS;
break;
}
}
//-----------------------------------------------------------------------------
-// Set up the synchronous serial port, with the one set of options that we
-// always use when we are talking to the FPGA. Both RX and TX are enabled.
+// Set up the synchronous serial port with the set of options that fits
+// the FPGA mode. Both RX and TX are always enabled.
//-----------------------------------------------------------------------------
-void FpgaSetupSsc(void)
-{
+void FpgaSetupSsc(uint16_t FPGA_mode) {
// First configure the GPIOs, and get ourselves a clock.
AT91C_BASE_PIOA->PIO_ASR =
- GPIO_SSC_FRAME |
- GPIO_SSC_DIN |
- GPIO_SSC_DOUT |
+ GPIO_SSC_FRAME |
+ GPIO_SSC_DIN |
+ GPIO_SSC_DOUT |
GPIO_SSC_CLK;
AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DOUT;
// Now set up the SSC proper, starting from a known state.
AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;
- // RX clock comes from TX clock, RX starts when TX starts, data changes
- // on RX clock rising edge, sampled on falling edge
+ // RX clock comes from TX clock, RX starts on Transmit Start,
+ // data and frame signal is sampled on falling edge of RK
AT91C_BASE_SSC->SSC_RCMR = SSC_CLOCK_MODE_SELECT(1) | SSC_CLOCK_MODE_START(1);
- // 8 bits per transfer, no loopback, MSB first, 1 transfer per sync
+ // 8, 16 or 32 bits per transfer, no loopback, MSB first, 1 transfer per sync
// pulse, no output sync
- AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0);
+ if ((FPGA_mode & FPGA_MAJOR_MODE_MASK) == FPGA_MAJOR_MODE_HF_READER && FpgaGetCurrent() == FPGA_BITSTREAM_HF) {
+ AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(16) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0);
+ } else {
+ AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0);
+ }
- // clock comes from TK pin, no clock output, outputs change on falling
- // edge of TK, sample on rising edge of TK, start on positive-going edge of sync
- AT91C_BASE_SSC->SSC_TCMR = SSC_CLOCK_MODE_SELECT(2) | SSC_CLOCK_MODE_START(5);
+ // TX clock comes from TK pin, no clock output, outputs change on rising edge of TK,
+ // TF (frame sync) is sampled on falling edge of TK, start TX on rising edge of TF
+ AT91C_BASE_SSC->SSC_TCMR = SSC_CLOCK_MODE_SELECT(2) | SSC_CLOCK_MODE_START(5);
// tx framing is the same as the rx framing
AT91C_BASE_SSC->SSC_TFMR = AT91C_BASE_SSC->SSC_RFMR;
// ourselves, not to another buffer). The stuff to manipulate those buffers
// is in apps.h, because it should be inlined, for speed.
//-----------------------------------------------------------------------------
-bool FpgaSetupSscDma(uint8_t *buf, int len)
-{
- if (buf == NULL) {
- return false;
- }
-
- AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS; // Disable DMA Transfer
- AT91C_BASE_PDC_SSC->PDC_RPR = (uint32_t) buf; // transfer to this memory address
- AT91C_BASE_PDC_SSC->PDC_RCR = len; // transfer this many bytes
- AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) buf; // next transfer to same memory address
- AT91C_BASE_PDC_SSC->PDC_RNCR = len; // ... with same number of bytes
- AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN; // go!
-
- return true;
+bool FpgaSetupSscDma(uint8_t *buf, uint16_t sample_count) {
+ if (buf == NULL) return false;
+
+ AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS; // Disable DMA Transfer
+ AT91C_BASE_PDC_SSC->PDC_RPR = (uint32_t) buf; // transfer to this memory address
+ AT91C_BASE_PDC_SSC->PDC_RCR = sample_count; // transfer this many samples
+ AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) buf; // next transfer to same memory address
+ AT91C_BASE_PDC_SSC->PDC_RNCR = sample_count; // ... with same number of samples
+ AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN; // go!
+ return true;
}
-static int get_from_fpga_stream(z_streamp compressed_fpga_stream, uint8_t *output_buffer)
+//----------------------------------------------------------------------------
+// Uncompress (inflate) the FPGA data. Returns one decompressed byte with
+// each call.
+//----------------------------------------------------------------------------
+static int get_from_fpga_combined_stream(z_streamp compressed_fpga_stream, uint8_t *output_buffer)
{
- if (fpga_image_ptr == compressed_fpga_stream->next_out) { // need more data
+ if (fpga_image_ptr == compressed_fpga_stream->next_out) { // need more data
compressed_fpga_stream->next_out = output_buffer;
compressed_fpga_stream->avail_out = OUTPUT_BUFFER_LEN;
fpga_image_ptr = output_buffer;
int res = inflate(compressed_fpga_stream, Z_SYNC_FLUSH);
- if (res != Z_OK) {
+ if (res != Z_OK)
Dbprintf("inflate returned: %d, %s", res, compressed_fpga_stream->msg);
- }
- if (res < 0) {
+
+ if (res < 0)
return res;
- }
}
+ uncompressed_bytes_cnt++;
+
return *fpga_image_ptr++;
}
+//----------------------------------------------------------------------------
+// Undo the interleaving of several FPGA config files. FPGA config files
+// are combined into one big file:
+// 288 bytes from FPGA file 1, followed by 288 bytes from FGPA file 2, etc.
+//----------------------------------------------------------------------------
+static int get_from_fpga_stream(int bitstream_version, z_streamp compressed_fpga_stream, uint8_t *output_buffer)
+{
+ while((uncompressed_bytes_cnt / FPGA_INTERLEAVE_SIZE) % fpga_bitstream_num != (bitstream_version - 1)) {
+ // skip undesired data belonging to other bitstream_versions
+ get_from_fpga_combined_stream(compressed_fpga_stream, output_buffer);
+ }
+
+ return get_from_fpga_combined_stream(compressed_fpga_stream, output_buffer);
+
+}
+
static voidpf fpga_inflate_malloc(voidpf opaque, uInt items, uInt size)
{
- Dbprintf("zlib requested %d bytes", items*size);
return BigBuf_malloc(items*size);
}
static void fpga_inflate_free(voidpf opaque, voidpf address)
{
- Dbprintf("zlib frees memory");
- BigBuf_free_keep_EM();
+ BigBuf_free(); BigBuf_Clear_ext(false);
}
+//----------------------------------------------------------------------------
+// Initialize decompression of the respective (HF or LF) FPGA stream
+//----------------------------------------------------------------------------
static bool reset_fpga_stream(int bitstream_version, z_streamp compressed_fpga_stream, uint8_t *output_buffer)
{
uint8_t header[FPGA_BITSTREAM_FIXED_HEADER_SIZE];
- uint8_t *fpga_image_start;
- uint32_t fpga_image_size;
-
- if (bitstream_version == FPGA_BITSTREAM_LF) {
- fpga_image_start = &_binary_fpga_lf_bit_start;
- fpga_image_size = (uint32_t)&_binary_fpga_lf_bit_end - (uint32_t)&_binary_fpga_lf_bit_start;
- } else if (bitstream_version == FPGA_BITSTREAM_HF) {
- fpga_image_start = &_binary_fpga_hf_bit_start;
- fpga_image_size = (uint32_t)&_binary_fpga_hf_bit_end - (uint32_t)&_binary_fpga_hf_bit_start;
- } else {
- return false;
- }
+
+ uncompressed_bytes_cnt = 0;
// initialize z_stream structure for inflate:
- compressed_fpga_stream->next_in = fpga_image_start;
- compressed_fpga_stream->avail_in = fpga_image_size;
+ compressed_fpga_stream->next_in = &_binary_obj_fpga_all_bit_z_start;
+ compressed_fpga_stream->avail_in = &_binary_obj_fpga_all_bit_z_end - &_binary_obj_fpga_all_bit_z_start;
compressed_fpga_stream->next_out = output_buffer;
compressed_fpga_stream->avail_out = OUTPUT_BUFFER_LEN;
compressed_fpga_stream->zalloc = &fpga_inflate_malloc;
compressed_fpga_stream->zfree = &fpga_inflate_free;
- // initialize inflate with WindowBits=15 and to automatically detect header:
- inflateInit2(compressed_fpga_stream, 15+32);
+ inflateInit2(compressed_fpga_stream, 0);
fpga_image_ptr = output_buffer;
for (uint16_t i = 0; i < FPGA_BITSTREAM_FIXED_HEADER_SIZE; i++) {
- header[i] = get_from_fpga_stream(compressed_fpga_stream, output_buffer);
+ header[i] = get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer);
}
-
- // Check for a valid .bit file (starts with _bitparse_fixed_header)
- if(memcmp(_bitparse_fixed_header, header, FPGA_BITSTREAM_FIXED_HEADER_SIZE) == 0) {
+
+ // Check for a valid .bit file (starts with bitparse_fixed_header)
+ if(memcmp(bitparse_fixed_header, header, FPGA_BITSTREAM_FIXED_HEADER_SIZE) == 0) {
return true;
} else {
return false;
}
// Download the fpga image starting at current stream position with length FpgaImageLen bytes
-static void DownloadFPGA(int FpgaImageLen, z_streamp compressed_fpga_stream, uint8_t *output_buffer)
+static void DownloadFPGA(int bitstream_version, int FpgaImageLen, z_streamp compressed_fpga_stream, uint8_t *output_buffer)
{
- Dbprintf("DownloadFPGA(len: %d)", FpgaImageLen);
-
+ //Dbprintf("DownloadFPGA(len: %d)", FpgaImageLen);
+
int i=0;
AT91C_BASE_PIOA->PIO_OER = GPIO_FPGA_ON;
AT91C_BASE_PIOA->PIO_PER = GPIO_FPGA_ON;
- HIGH(GPIO_FPGA_ON); // ensure everything is powered on
+ HIGH(GPIO_FPGA_ON); // ensure everything is powered on
SpinDelay(50);
LED_D_ON();
// These pins are inputs
- AT91C_BASE_PIOA->PIO_ODR =
- GPIO_FPGA_NINIT |
- GPIO_FPGA_DONE;
+ AT91C_BASE_PIOA->PIO_ODR =
+ GPIO_FPGA_NINIT |
+ GPIO_FPGA_DONE;
// PIO controls the following pins
- AT91C_BASE_PIOA->PIO_PER =
- GPIO_FPGA_NINIT |
- GPIO_FPGA_DONE;
+ AT91C_BASE_PIOA->PIO_PER =
+ GPIO_FPGA_NINIT |
+ GPIO_FPGA_DONE;
// Enable pull-ups
AT91C_BASE_PIOA->PIO_PPUER =
GPIO_FPGA_NINIT |
LOW(GPIO_FPGA_DIN);
// These pins are outputs
AT91C_BASE_PIOA->PIO_OER =
- GPIO_FPGA_NPROGRAM |
- GPIO_FPGA_CCLK |
+ GPIO_FPGA_NPROGRAM |
+ GPIO_FPGA_CCLK |
GPIO_FPGA_DIN;
// enter FPGA configuration mode
}
for(i = 0; i < FpgaImageLen; i++) {
- int b = get_from_fpga_stream(compressed_fpga_stream, output_buffer);
+ int b = get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer);
if (b < 0) {
Dbprintf("Error %d during FpgaDownload", b);
break;
}
DownloadFPGA_byte(b);
}
-
- Dbprintf("%d bytes loaded into FPGA", i);
-
+
// continue to clock FPGA until ready signal goes high
i=100000;
while ( (i--) && ( !(AT91C_BASE_PIOA->PIO_PDSR & GPIO_FPGA_DONE ) ) ) {
* (big endian), <length> bytes content. Except for section 'e' which has 4 bytes
* length.
*/
-static int bitparse_find_section(char section_name, unsigned int *section_length, z_streamp compressed_fpga_stream, uint8_t *output_buffer)
+static int bitparse_find_section(int bitstream_version, char section_name, unsigned int *section_length, z_streamp compressed_fpga_stream, uint8_t *output_buffer)
{
int result = 0;
#define MAX_FPGA_BIT_STREAM_HEADER_SEARCH 100 // maximum number of bytes to search for the requested section
uint16_t numbytes = 0;
while(numbytes < MAX_FPGA_BIT_STREAM_HEADER_SEARCH) {
- char current_name = get_from_fpga_stream(compressed_fpga_stream, output_buffer);
+ char current_name = get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer);
numbytes++;
unsigned int current_length = 0;
if(current_name < 'a' || current_name > 'e') {
switch(current_name) {
case 'e':
/* Four byte length field */
- current_length += get_from_fpga_stream(compressed_fpga_stream, output_buffer) << 24;
- current_length += get_from_fpga_stream(compressed_fpga_stream, output_buffer) << 16;
+ current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 24;
+ current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 16;
numbytes += 2;
default: /* Fall through, two byte length field */
- current_length += get_from_fpga_stream(compressed_fpga_stream, output_buffer) << 8;
- current_length += get_from_fpga_stream(compressed_fpga_stream, output_buffer) << 0;
+ current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 8;
+ current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 0;
numbytes += 2;
}
}
for (uint16_t i = 0; i < current_length && numbytes < MAX_FPGA_BIT_STREAM_HEADER_SEARCH; i++) {
- get_from_fpga_stream(compressed_fpga_stream, output_buffer);
+ get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer);
numbytes++;
}
}
}
-//-----------------------------------------------------------------------------
-// Find out which FPGA image format is stored in flash, then call DownloadFPGA
-// with the right parameters to download the image
-//-----------------------------------------------------------------------------
+//----------------------------------------------------------------------------
+// Check which FPGA image is currently loaded (if any). If necessary
+// decompress and load the correct (HF or LF) image to the FPGA
+//----------------------------------------------------------------------------
void FpgaDownloadAndGo(int bitstream_version)
{
z_stream compressed_fpga_stream;
- uint8_t output_buffer[OUTPUT_BUFFER_LEN];
-
+ uint8_t output_buffer[OUTPUT_BUFFER_LEN] = {0x00};
+
// check whether or not the bitstream is already loaded
- if (downloaded_bitstream == bitstream_version)
+ if (downloaded_bitstream == bitstream_version) {
+ FpgaEnableTracing();
return;
+ }
+
+ // make sure that we have enough memory to decompress
+ BigBuf_free(); BigBuf_Clear_ext(false);
if (!reset_fpga_stream(bitstream_version, &compressed_fpga_stream, output_buffer)) {
return;
}
unsigned int bitstream_length;
- if(bitparse_find_section('e', &bitstream_length, &compressed_fpga_stream, output_buffer)) {
- DownloadFPGA(bitstream_length, &compressed_fpga_stream, output_buffer);
+ if (bitparse_find_section(bitstream_version, 'e', &bitstream_length, &compressed_fpga_stream, output_buffer)) {
+ DownloadFPGA(bitstream_version, bitstream_length, &compressed_fpga_stream, output_buffer);
downloaded_bitstream = bitstream_version;
}
inflateEnd(&compressed_fpga_stream);
-
-}
-
-
-void FpgaGatherVersion(int bitstream_version, char *dst, int len)
-{
- unsigned int fpga_info_len;
- char tempstr[40];
- z_stream compressed_fpga_stream;
- uint8_t output_buffer[OUTPUT_BUFFER_LEN];
-
- dst[0] = '\0';
-
- if (!reset_fpga_stream(bitstream_version, &compressed_fpga_stream, output_buffer)) {
- return;
- }
- if(bitparse_find_section('a', &fpga_info_len, &compressed_fpga_stream, output_buffer)) {
- for (uint16_t i = 0; i < fpga_info_len; i++) {
- char c = (char)get_from_fpga_stream(&compressed_fpga_stream, output_buffer);
- if (i < sizeof(tempstr)) {
- tempstr[i] = c;
- }
- }
- if (!memcmp("fpga_lf", tempstr, 7))
- strncat(dst, "LF ", len-1);
- else if (!memcmp("fpga_hf", tempstr, 7))
- strncat(dst, "HF ", len-1);
- }
- strncat(dst, "FPGA image built", len-1);
- if(bitparse_find_section('b', &fpga_info_len, &compressed_fpga_stream, output_buffer)) {
- strncat(dst, " for ", len-1);
- for (uint16_t i = 0; i < fpga_info_len; i++) {
- char c = (char)get_from_fpga_stream(&compressed_fpga_stream, output_buffer);
- if (i < sizeof(tempstr)) {
- tempstr[i] = c;
- }
- }
- strncat(dst, tempstr, len-1);
- }
- if(bitparse_find_section('c', &fpga_info_len, &compressed_fpga_stream, output_buffer)) {
- strncat(dst, " on ", len-1);
- for (uint16_t i = 0; i < fpga_info_len; i++) {
- char c = (char)get_from_fpga_stream(&compressed_fpga_stream, output_buffer);
- if (i < sizeof(tempstr)) {
- tempstr[i] = c;
- }
- }
- strncat(dst, tempstr, len-1);
- }
- if(bitparse_find_section('d', &fpga_info_len, &compressed_fpga_stream, output_buffer)) {
- strncat(dst, " at ", len-1);
- for (uint16_t i = 0; i < fpga_info_len; i++) {
- char c = (char)get_from_fpga_stream(&compressed_fpga_stream, output_buffer);
- if (i < sizeof(tempstr)) {
- tempstr[i] = c;
- }
- }
- strncat(dst, tempstr, len-1);
- }
-
- inflateEnd(&compressed_fpga_stream);
+ // turn off antenna
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ // free eventually allocated BigBuf memory
+ BigBuf_free(); BigBuf_Clear_ext(false);
}
// The bit format is: C3 C2 C1 C0 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
// where C is the 4 bit command and D is the 12 bit data
//-----------------------------------------------------------------------------
-void FpgaSendCommand(uint16_t cmd, uint16_t v)
-{
+void FpgaSendCommand(uint16_t cmd, uint16_t v) {
SetupSpi(SPI_FPGA_MODE);
- while ((AT91C_BASE_SPI->SPI_SR & AT91C_SPI_TXEMPTY) == 0); // wait for the transfer to complete
- AT91C_BASE_SPI->SPI_TDR = AT91C_SPI_LASTXFER | cmd | v; // send the data
+ AT91C_BASE_SPI->SPI_TDR = AT91C_SPI_LASTXFER | cmd | v; // write the data to be sent
+ while ((AT91C_BASE_SPI->SPI_SR & AT91C_SPI_TXEMPTY) == 0); // wait for the transfer to complete
}
+
//-----------------------------------------------------------------------------
// Write the FPGA setup word (that determines what mode the logic is in, read
// vs. clone vs. etc.). This is now a special case of FpgaSendCommand() to
// avoid changing this function's occurence everywhere in the source code.
//-----------------------------------------------------------------------------
-void FpgaWriteConfWord(uint8_t v)
-{
+void FpgaWriteConfWord(uint16_t v) {
FpgaSendCommand(FPGA_CMD_SET_CONFREG, v);
}
+//-----------------------------------------------------------------------------
+// enable/disable FPGA internal tracing
+//-----------------------------------------------------------------------------
+void FpgaEnableTracing(void) {
+ FpgaSendCommand(FPGA_CMD_TRACE_ENABLE, 1);
+}
+
+void FpgaDisableTracing(void) {
+ FpgaSendCommand(FPGA_CMD_TRACE_ENABLE, 0);
+}
+
//-----------------------------------------------------------------------------
// Set up the CMOS switches that mux the ADC: four switches, independently
// closable, but should only close one at a time. Not an FPGA thing, but
HIGH(whichGpio);
}
+
+void Fpga_print_status(void) {
+ Dbprintf("Currently loaded FPGA image:");
+ Dbprintf(" %s", fpga_version_information[downloaded_bitstream-1]);
+}
+
+int FpgaGetCurrent() {
+ return downloaded_bitstream;
+}
projects / proxmark3-svn / blobdiff