//-----------------------------------------------------------------------------
// High frequency MIFARE ULTRALIGHT (C) commands
//-----------------------------------------------------------------------------
-//#include <openssl/des.h>
#include "loclass/des.h"
#include "cmdhfmfu.h"
#include "cmdhfmf.h"
#include "cmdhf14a.h"
+#include "mifare.h"
+#include "util.h"
+#include "protocols.h"
+
+#define MAX_UL_BLOCKS 0x0f
+#define MAX_ULC_BLOCKS 0x2f
+#define MAX_ULEV1a_BLOCKS 0x0b
+#define MAX_ULEV1b_BLOCKS 0x20
+#define MAX_NTAG_213 0x2c
+#define MAX_NTAG_215 0x86
+#define MAX_NTAG_216 0xe6
+
+#define KEYS_3DES_COUNT 7
+uint8_t default_3des_keys[KEYS_3DES_COUNT][16] = {
+ { 0x42,0x52,0x45,0x41,0x4b,0x4d,0x45,0x49,0x46,0x59,0x4f,0x55,0x43,0x41,0x4e,0x21 },// 3des std key
+ { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 },// all zeroes
+ { 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f },// 0x00-0x0F
+ { 0x49,0x45,0x4D,0x4B,0x41,0x45,0x52,0x42,0x21,0x4E,0x41,0x43,0x55,0x4F,0x59,0x46 },// NFC-key
+ { 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01 },// all ones
+ { 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF },// all FF
+ { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD,0xEE,0xFF } // 11 22 33
+};
+#define KEYS_PWD_COUNT 8
+uint8_t default_pwd_pack[KEYS_PWD_COUNT][4] = {
+ {0xFF,0xFF,0xFF,0xFF}, // PACK 0x00,0x00 -- factory default
+ {0x4A,0xF8,0x4B,0x19}, // PACK 0xE5,0xBE -- italian bus (sniffed)
+ {0x33,0x6B,0xA1,0x19}, // PACK 0x9c,0x2d -- italian bus (sniffed)
+ {0xFF,0x90,0x6C,0xB2}, // PACK 0x12,0x9e -- italian bus (sniffed)
+ {0x05,0x22,0xE6,0xB4}, // PACK 0x80,0x80 -- Amiiboo (sniffed) pikachu-b UID:
+ {0x7E,0x22,0xE6,0xB4}, // PACK 0x80,0x80 -- AMiiboo (sniffed)
+ {0x02,0xE1,0xEE,0x36}, // PACK 0x80,0x80 -- AMiiboo (sniffed) sonic UID: 04d257 7ae33e8027
+ {0x32,0x0C,0x16,0x17}, // PACK 0x80,0x80 -- AMiiboo (sniffed)
+};
-#define MAX_ULTRA_BLOCKS 0x0f
-#define MAX_ULTRAC_BLOCKS 0x2f
-//#define MAX_ULTRAC_BLOCKS 0x2c
+static int CmdHelp(const char *Cmd);
+char* getProductTypeStr( uint8_t id){
+
+ static char buf[20];
+ char *retStr = buf;
+
+ switch(id) {
+ case 3:
+ sprintf(retStr, "0x%02X %s", id, "(Ultralight)");
+ break;
+ case 4:
+ sprintf(retStr, "0x%02X %s", id, "(NTAG)");
+ break;
+ default:
+ sprintf(retStr, "0x%02X %s", id, "(unknown)");
+ break;
+ }
+ return buf;
+}
-static int CmdHelp(const char *Cmd);
+/*
+ The 7 MSBits (=n) code the storage size itself based on 2^n,
+ the LSBit is set to '0' if the size is exactly 2^n
+ and set to '1' if the storage size is between 2^n and 2^(n+1).
+*/
+char* getUlev1CardSizeStr( uint8_t fsize ){
+
+ static char buf[40];
+ char *retStr = buf;
+ memset(buf, 0, sizeof(buf));
+
+ uint16_t usize = 1 << ((fsize >>1) + 1);
+ uint16_t lsize = 1 << (fsize >>1);
+
+ // is LSB set?
+ if ( fsize & 1 )
+ sprintf(retStr, "%02X (%u <-> %u bytes)",fsize, usize, lsize);
+ else
+ sprintf(retStr, "%02X (%u bytes)", fsize, lsize);
+ return buf;
+}
-int CmdHF14AMfUInfo(const char *Cmd){
+static void ul_switch_on_field(void) {
+ UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_CONNECT | ISO14A_NO_DISCONNECT, 0, 0}};
+ SendCommand(&c);
+}
- uint8_t datatemp[7] = {0x00};
- uint8_t isOK = 0;
- uint8_t *data = NULL;
+static void ul_switch_off_field(void) {
+ UsbCommand c = {CMD_READER_ISO_14443a, {0, 0, 0}};
+ SendCommand(&c);
+}
- UsbCommand c = {CMD_MIFAREU_READCARD, {0, 4}};
+static int ul_send_cmd_raw( uint8_t *cmd, uint8_t cmdlen, uint8_t *response, uint16_t responseLength ) {
+ UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_RAW | ISO14A_NO_DISCONNECT | ISO14A_APPEND_CRC, cmdlen, 0}};
+ memcpy(c.d.asBytes, cmd, cmdlen);
SendCommand(&c);
UsbCommand resp;
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return -1;
+ if (!resp.arg[0] && responseLength) return -1;
- if (WaitForResponseTimeout(CMD_ACK, &resp, 1500)) {
- isOK = resp.arg[0] & 0xff;
- data = resp.d.asBytes;
+ uint16_t resplen = (resp.arg[0] < responseLength) ? resp.arg[0] : responseLength;
+ memcpy(response, resp.d.asBytes, resplen);
+ return resplen;
+}
+/*
+static int ul_send_cmd_raw_crc( uint8_t *cmd, uint8_t cmdlen, uint8_t *response, uint16_t responseLength, bool append_crc ) {
+ UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_RAW | ISO14A_NO_DISCONNECT , cmdlen, 0}};
+ if (append_crc)
+ c.arg[0] |= ISO14A_APPEND_CRC;
- if (!isOK) {
- PrintAndLog("Error reading from tag");
- return -1;
- }
- } else {
- PrintAndLog("Command execute timed out");
- return -1;
- }
-
- PrintAndLog("");
- PrintAndLog("-- Mifare Ultralight / Ultralight-C Tag Information ---------");
- PrintAndLog("-------------------------------------------------------------");
+ memcpy(c.d.asBytes, cmd, cmdlen);
+ SendCommand(&c);
+ UsbCommand resp;
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return -1;
+ if (!resp.arg[0] && responseLength) return -1;
- // UID
- memcpy( datatemp, data, 3);
- memcpy( datatemp+3, data+4, 4);
+ uint16_t resplen = (resp.arg[0] < responseLength) ? resp.arg[0] : responseLength;
+ memcpy(response, resp.d.asBytes, resplen);
+ return resplen;
+}
+*/
+static int ul_select( iso14a_card_select_t *card ){
+
+ ul_switch_on_field();
+
+ UsbCommand resp;
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return -1;
+ if (resp.arg[0] < 1) return -1;
+
+ memcpy(card, resp.d.asBytes, sizeof(iso14a_card_select_t));
+ return resp.arg[0];
+}
+
+// This read command will at least return 16bytes.
+static int ul_read( uint8_t page, uint8_t *response, uint16_t responseLength ){
+
+ uint8_t cmd[] = {ISO14443A_CMD_READBLOCK, page};
+ int len = ul_send_cmd_raw(cmd, sizeof(cmd), response, responseLength);
+ if ( len == -1 )
+ ul_switch_off_field();
+ return len;
+}
+
+static int ul_comp_write( uint8_t page, uint8_t *data, uint8_t datalen ){
+
+ uint8_t cmd[18];
+ memset(cmd, 0x00, sizeof(cmd));
+ datalen = ( datalen > 16) ? 16 : datalen;
+
+ cmd[0] = ISO14443A_CMD_WRITEBLOCK;
+ cmd[1] = page;
+ memcpy(cmd+2, data, datalen);
+
+ uint8_t response[1] = {0xff};
+ int len = ul_send_cmd_raw(cmd, 2+datalen, response, sizeof(response));
+ if ( len == -1 )
+ ul_switch_off_field();
+ // ACK
+ if ( response[0] == 0x0a ) return 0;
+ // NACK
+ return -1;
+}
+
+static int ulc_requestAuthentication( uint8_t blockNo, uint8_t *nonce, uint16_t nonceLength ){
+
+ uint8_t cmd[] = {MIFARE_ULC_AUTH_1, blockNo};
+ int len = ul_send_cmd_raw(cmd, sizeof(cmd), nonce, nonceLength);
+ if ( len == -1 )
+ ul_switch_off_field();
+ return len;
+}
+
+static int ulev1_requestAuthentication( uint8_t *pwd, uint8_t *pack, uint16_t packLength ){
+
+ uint8_t cmd[] = {MIFARE_ULEV1_AUTH, pwd[0], pwd[1], pwd[2], pwd[3]};
+ int len = ul_send_cmd_raw(cmd, sizeof(cmd), pack, packLength);
+ if ( len == -1)
+ ul_switch_off_field();
+ return len;
+}
+
+static int ulev1_getVersion( uint8_t *response, uint16_t responseLength ){
+
+ uint8_t cmd[] = {MIFARE_ULEV1_VERSION};
+ int len = ul_send_cmd_raw(cmd, sizeof(cmd), response, responseLength);
+ if ( len == -1 )
+ ul_switch_off_field();
+ return len;
+}
+
+// static int ulev1_fastRead( uint8_t startblock, uint8_t endblock, uint8_t *response ){
+
+ // uint8_t cmd[] = {MIFARE_ULEV1_FASTREAD, startblock, endblock};
- PrintAndLog("MANUFACTURER : %s", getTagInfo(datatemp[0]));
- PrintAndLog(" UID : %s ", sprint_hex(datatemp, 7));
- // BBC
+ // if ( !ul_send_cmd_raw(cmd, sizeof(cmd), response)){
+ // ul_switch_off_field();
+ // return -1;
+ // }
+ // return 0;
+// }
+
+static int ulev1_readCounter( uint8_t counter, uint8_t *response, uint16_t responseLength ){
+
+ uint8_t cmd[] = {MIFARE_ULEV1_READ_CNT, counter};
+ int len = ul_send_cmd_raw(cmd, sizeof(cmd), response, responseLength);
+ if (len == -1)
+ ul_switch_off_field();
+ return len;
+}
+
+static int ulev1_readSignature( uint8_t *response, uint16_t responseLength ){
+
+ uint8_t cmd[] = {MIFARE_ULEV1_READSIG, 0x00};
+ int len = ul_send_cmd_raw(cmd, sizeof(cmd), response, responseLength);
+ if (len == -1)
+ ul_switch_off_field();
+ return len;
+}
+
+static int ul_print_default( uint8_t *data){
+
+ uint8_t uid[7];
+
+ uid[0] = data[0];
+ uid[1] = data[1];
+ uid[2] = data[2];
+ uid[3] = data[4];
+ uid[4] = data[5];
+ uid[5] = data[6];
+ uid[6] = data[7];
+
+ PrintAndLog(" UID : %s ", sprint_hex(uid, 7));
+ PrintAndLog(" UID[0] : %02X, Manufacturer: %s", uid[0], getTagInfo(uid[0]) );
+ if ( uid[0] == 0x05 ) {
+ uint8_t chip = (data[8] & 0xC7); // 11000111 mask, bit 3,4,5 RFU
+ switch (chip){
+ case 0xc2: PrintAndLog(" IC type : SLE 66R04P"); break;
+ case 0xc4: PrintAndLog(" IC type : SLE 66R16P"); break;
+ case 0xc6: PrintAndLog(" IC type : SLE 66R32P"); break;
+ }
+ }
// CT (cascade tag byte) 0x88 xor SN0 xor SN1 xor SN2
int crc0 = 0x88 ^ data[0] ^ data[1] ^data[2];
if ( data[3] == crc0 )
- PrintAndLog(" BCC0 : %02x - Ok", data[3]);
+ PrintAndLog(" BCC0 : %02X - Ok", data[3]);
else
- PrintAndLog(" BCC0 : %02x - crc should be %02x", data[3], crc0);
-
+ PrintAndLog(" BCC0 : %02X - crc should be %02X", data[3], crc0);
+
int crc1 = data[4] ^ data[5] ^ data[6] ^data[7];
if ( data[8] == crc1 )
- PrintAndLog(" BCC1 : %02x - Ok", data[8]);
+ PrintAndLog(" BCC1 : %02X - Ok", data[8]);
else
- PrintAndLog(" BCC1 : %02x - crc should be %02x", data[8], crc1 );
-
- PrintAndLog(" Internal : %s ", sprint_hex(data + 9, 1));
-
- memcpy(datatemp, data+10, 2);
- PrintAndLog(" Lock : %s - %s", sprint_hex(datatemp, 2),printBits( 2, &datatemp) );
- PrintAndLog(" OneTimePad : %s ", sprint_hex(data + 3*4, 4));
+ PrintAndLog(" BCC1 : %02X - crc should be %02X", data[8], crc1 );
+
+ PrintAndLog(" Internal : %02X - %s default", data[9], (data[9]==0x48)?"":"not" );
+ PrintAndLog(" Lock : %s - %s", sprint_hex(data+10, 2),printBits( 2, data+10) );
+ PrintAndLog("OneTimePad : %s ", sprint_hex(data + 12, 4));
PrintAndLog("");
+ return 0;
+}
+
+static int ntag_print_CC(uint8_t *data) {
+
+ PrintAndLog("\n--- NTAG NDEF Message");
+
+ if(data[0] != 0xe1) {
+ PrintAndLog("no NDEF message");
+ return -1; // no NDEF message
+ }
+
+ PrintAndLog("Capability Container: %s", sprint_hex(data,4) );
+ PrintAndLog(" %02X: NDEF Magic Number", data[0]);
+ PrintAndLog(" %02X: version %d.%d supported by tag", data[1], (data[1] & 0xF0) >> 4, data[1] & 0x0f);
+ PrintAndLog(" %02X: Physical Memory Size: %d bytes", data[2], (data[2] + 1) * 8);
+ if ( data[2] == 0x12 )
+ PrintAndLog(" %02X: NDEF Memory Size: %d bytes", data[2], 144);
+ else if ( data[2] == 0x3e )
+ PrintAndLog(" %02X: NDEF Memory Size: %d bytes", data[2], 496);
+ else if ( data[2] == 0x6d )
+ PrintAndLog(" %02X: NDEF Memory Size: %d bytes", data[2], 872);
+
+ PrintAndLog(" %02X: %s / %s", data[3],
+ (data[3] & 0xF0) ? "(RFU)" : "Read access granted without any security",
+ (data[3] & 0x0F)==0 ? "Write access granted without any security" : (data[3] & 0x0F)==0x0F ? "No write access granted at all" : "(RFU)");
+ return 0;
+}
+
+int ul_print_type(uint16_t tagtype, uint8_t spaces){
+ char spc[11] = " ";
+ spc[10]=0x00;
+ char *spacer = spc + (10-spaces);
+
+ if ( tagtype & UL )
+ PrintAndLog("%sTYPE : MIFARE Ultralight (MF0ICU1) %s [%x]", spacer, (tagtype & MAGIC)?"<magic>":"", tagtype);
+ else if ( tagtype & UL_C)
+ PrintAndLog("%sTYPE : MIFARE Ultralight C (MF0ULC) %s [%x]", spacer, (tagtype & MAGIC)?"<magic>":"", tagtype );
+ else if ( tagtype & UL_EV1_48)
+ PrintAndLog("%sTYPE : MIFARE Ultralight EV1 48bytes (MF0UL1101)", spacer);
+ else if ( tagtype & UL_EV1_128)
+ PrintAndLog("%sTYPE : MIFARE Ultralight EV1 128bytes (MF0UL2101)", spacer);
+ else if ( tagtype & NTAG_213 )
+ PrintAndLog("%sTYPE : MIFARE NTAG 213 144bytes (NT2H1311G0DU)", spacer);
+ else if ( tagtype & NTAG_215 )
+ PrintAndLog("%sTYPE : MIFARE NTAG 215 504bytes (NT2H1511G0DU)", spacer);
+ else if ( tagtype & NTAG_216 )
+ PrintAndLog("%sTYPE : MIFARE NTAG 216 888bytes (NT2H1611G0DU)", spacer);
+ else if ( tagtype & MY_D )
+ PrintAndLog("%sTYPE : INFINEON my-d\x99", spacer);
+ else if ( tagtype & MY_D_NFC )
+ PrintAndLog("%sTYPE : INFINEON my-d\x99 NFC", spacer);
+ else if ( tagtype & MY_D_MOVE )
+ PrintAndLog("%sTYPE : INFINEON my-d\x99 move", spacer);
+ else if ( tagtype & MY_D_MOVE_NFC )
+ PrintAndLog("%sTYPE : INFINEON my-d\x99 move NFC", spacer);
+ else
+ PrintAndLog("%sTYPE : Unknown %04x", spacer, tagtype);
+ return 0;
+}
+
+static int ulc_print_3deskey( uint8_t *data){
+ PrintAndLog(" deskey1 [44/0x2C]: %s [%.4s]", sprint_hex(data ,4),data);
+ PrintAndLog(" deskey1 [45/0x2D]: %s [%.4s]", sprint_hex(data+4 ,4),data+4);
+ PrintAndLog(" deskey2 [46/0x2E]: %s [%.4s]", sprint_hex(data+8 ,4),data+8);
+ PrintAndLog(" deskey2 [47/0x2F]: %s [%.4s]", sprint_hex(data+12,4),data+12);
+ PrintAndLog(" 3des key : %s", sprint_hex(SwapEndian64(data, 16), 16));
+ return 0;
+}
+
+static int ulc_print_configuration( uint8_t *data){
+
+ PrintAndLog("--- UL-C Configuration");
+ PrintAndLog(" Higher Lockbits [40/0x28]: %s - %s", sprint_hex(data, 4), printBits(2, data));
+ PrintAndLog(" Counter [41/0x29]: %s - %s", sprint_hex(data+4, 4), printBits(2, data+4));
+
+ bool validAuth = (data[8] >= 0x03 && data[8] <= 0x30);
+ if ( validAuth )
+ PrintAndLog(" Auth0 [42/0x2A]: %s Pages above %d needs authentication", sprint_hex(data+8, 4), data[8] );
+ else{
+ if ( data[8] == 0){
+ PrintAndLog(" Auth0 [42/0x2A]: %s default", sprint_hex(data+8, 4) );
+ } else {
+ PrintAndLog(" Auth0 [42/0x2A]: %s auth byte is out-of-range", sprint_hex(data+8, 4) );
+ }
+ }
+ PrintAndLog(" Auth1 [43/0x2B]: %s %s",
+ sprint_hex(data+12, 4),
+ (data[12] & 1) ? "write access restricted": "read and write access restricted"
+ );
+ return 0;
+}
+
+static int ulev1_print_configuration( uint8_t *data){
+
+ PrintAndLog("\n--- UL-EV1 Configuration");
+
+ bool strg_mod_en = (data[0] & 2);
+ uint8_t authlim = (data[4] & 0x07);
+ bool cfglck = (data[4] & 0x40);
+ bool prot = (data[4] & 0x80);
+ uint8_t vctid = data[5];
+
+ PrintAndLog(" cfg0 [16/0x10]: %s", sprint_hex(data, 4));
+ if ( data[3] < 0xff )
+ PrintAndLog(" - pages above %d needs authentication",data[3]);
+ else
+ PrintAndLog(" - pages don't need authentication");
+ PrintAndLog(" - strong modulation mode %s", (strg_mod_en) ? "enabled":"disabled");
+ PrintAndLog(" cfg1 [17/0x11]: %s", sprint_hex(data+4, 4) );
+ if ( authlim == 0)
+ PrintAndLog(" - Unlimited password attempts");
+ else
+ PrintAndLog(" - Max number of password attempts is %d", authlim);
+ PrintAndLog(" - user configuration %s", cfglck ? "permanently locked":"writeable");
+ PrintAndLog(" - %s access is protected with password", prot ? "read and write":"write");
+ PrintAndLog(" %02X - Virtual Card Type Identifier is %s default", vctid, (vctid==0x05)? "":"not");
+ PrintAndLog(" PWD [18/0x12]: %s", sprint_hex(data+8, 4));
+ PrintAndLog(" PACK [19/0x13]: %s", sprint_hex(data+12, 4));
+ return 0;
+}
+
+static int ulev1_print_counters(){
+ PrintAndLog("--- UL-EV1 Counters");
+ uint8_t counter[3] = {0,0,0};
+ for ( uint8_t i = 0; i<3; ++i) {
+ ulev1_readCounter(i,counter, sizeof(counter) );
+ PrintAndLog(" [%0d] : %s", i, sprint_hex(counter,3));
+ }
+ return 0;
+}
+
+static int ulev1_print_signature( uint8_t *data, uint8_t len){
+ PrintAndLog("\n--- UL-EV1 Signature");
+ PrintAndLog("IC signature public key name : NXP NTAG21x 2013");
+ PrintAndLog("IC signature public key value : 04494e1a386d3d3cfe3dc10e5de68a499b1c202db5b132393e89ed19fe5be8bc61");
+ PrintAndLog(" Elliptic curve parameters : secp128r1");
+ PrintAndLog(" Tag ECC Signature : %s", sprint_hex(data, len));
+ //to do: verify if signature is valid
+ //PrintAndLog("IC signature status: %s valid", (iseccvalid() )?"":"not");
+ return 0;
+}
+
+static int ulev1_print_version(uint8_t *data){
+ PrintAndLog("\n--- UL-EV1 / NTAG Version");
+ PrintAndLog(" Raw bytes : %s", sprint_hex(data, 8) );
+ PrintAndLog(" Vendor ID : %02X, Manufacturer: %s", data[1], getTagInfo(data[1]));
+ PrintAndLog(" Product type : %s", getProductTypeStr(data[2]));
+ PrintAndLog(" Product subtype : %02X %s", data[3], (data[3]==1) ?"17 pF":"50pF");
+ PrintAndLog(" Major version : %02X", data[4]);
+ PrintAndLog(" Minor version : %02X", data[5]);
+ PrintAndLog(" Size : %s", getUlev1CardSizeStr(data[6]));
+ PrintAndLog(" Protocol type : %02X", data[7]);
+ return 0;
+}
+
+/*
+static int ulc_magic_test(){
+ // Magic Ultralight test
+ // Magic UL-C, by observation,
+ // 1) it seems to have a static nonce response to 0x1A command.
+ // 2) the deskey bytes is not-zero:d out on as datasheet states.
+ // 3) UID - changeable, not only, but pages 0-1-2-3.
+ // 4) use the ul_magic_test ! magic tags answers specially!
+ int returnValue = UL_ERROR;
+ iso14a_card_select_t card;
+ uint8_t nonce1[11] = {0x00};
+ uint8_t nonce2[11] = {0x00};
+ int status = ul_select(&card);
+ if ( status < 1 ){
+ PrintAndLog("Error: couldn't select ulc_magic_test");
+ ul_switch_off_field();
+ return UL_ERROR;
+ }
+ status = ulc_requestAuthentication(0, nonce1, sizeof(nonce1));
+ if ( status > 0 ) {
+ status = ulc_requestAuthentication(0, nonce2, sizeof(nonce2));
+ returnValue = ( !memcmp(nonce1, nonce2, 11) ) ? UL_C_MAGIC : UL_C;
+ } else {
+ returnValue = UL;
+ }
+ ul_switch_off_field();
+ return returnValue;
+}
+*/
+static int ul_magic_test(){
+
+ // Magic Ultralight tests
+ // 1) take present UID, and try to write it back. OBSOLETE
+ // 2) make a wrong length write to page0, and see if tag answers with ACK/NACK:
+ iso14a_card_select_t card;
+ int status = ul_select(&card);
+ if ( status < 1 ){
+ PrintAndLog("Error: couldn't select ul_magic_test");
+ ul_switch_off_field();
+ return UL_ERROR;
+ }
+ status = ul_comp_write(0, NULL, 0);
+ ul_switch_off_field();
+ if ( status == 0)
+ return UL_MAGIC;
+ return UL;
+}
+
+uint16_t GetHF14AMfU_Type(void){
+
+ TagTypeUL_t tagtype = UNKNOWN;
+ iso14a_card_select_t card;
+ uint8_t version[10] = {0x00};
+ int status = 0;
+ int len;
+
+ status = ul_select(&card);
+ if ( status < 1 ){
+ PrintAndLog("Error: couldn't select");
+ ul_switch_off_field();
+ return UL_ERROR;
+ }
+ // Ultralight - ATQA / SAK
+ if ( card.atqa[1] != 0x00 || card.atqa[0] != 0x44 || card.sak != 0x00 ) {
+ PrintAndLog("Tag is not Ultralight | NTAG | MY-D [ATQA: %02X %02X SAK: %02X]\n", card.atqa[1], card.atqa[0], card.sak);
+ ul_switch_off_field();
+ return UL_ERROR;
+ }
+
+ if ( card.uid[0] != 0x05) {
- int len = CmdHF14AMfucAuth("K 0");
-// PrintAndLog("CODE: %d",len);
+ len = ulev1_getVersion(version, sizeof(version));
+ if (len > -1) ul_switch_off_field(); //if -1 it is already off
+
+ switch (len) {
+ case 0x0A: {
+
+ if ( version[2] == 0x03 && version[6] == 0x0B )
+ tagtype = UL_EV1_48;
+ else if ( version[2] == 0x03 && version[6] != 0x0B )
+ tagtype = UL_EV1_128;
+ else if ( version[2] == 0x04 && version[6] == 0x0F )
+ tagtype = NTAG_213;
+ else if ( version[2] == 0x04 && version[6] == 0x11 )
+ tagtype = NTAG_215;
+ else if ( version[2] == 0x04 && version[6] == 0x13 )
+ tagtype = NTAG_216;
+ else if ( version[2] == 0x04 )
+ tagtype = NTAG;
+
+ break;
+ }
+ case 0x01: tagtype = UL_C; break;
+ case 0x00: tagtype = UL; break;
+ case -1 : tagtype = (UL | UL_C); break; //when does this happen?
+ default : tagtype = UNKNOWN; break;
+ }
+ if (tagtype == (UL | UL_C)) {
+ status = ul_select(&card);
+ if ( status < 1 ){
+ PrintAndLog("Error: couldn't select 2");
+ ul_switch_off_field();
+ return UL_ERROR;
+ }
+ uint8_t nonce1[11] = {0x00};
+ status = ulc_requestAuthentication(0, nonce1, sizeof(nonce1));
+ if ( status > 0 )
+ tagtype = UL_C;
+ else
+ tagtype = UL;
+
+ if (status != -1) ul_switch_off_field();
+ }
+ } else {
+ // Infinition MY-D tests Exam high nibble
+ uint8_t nib = (card.uid[1] & 0xf0) >> 4;
+ switch ( nib ){
+ case 1: tagtype = MY_D; break;
+ case 2: tagtype = (MY_D | MY_D_NFC); break;
+ case 3: tagtype = (MY_D_MOVE | MY_D_MOVE_NFC); break;
+ }
+ }
+
+ tagtype = (ul_magic_test() == UL_MAGIC) ? (tagtype | MAGIC) : tagtype;
+ //if ((tagtype & UL)) tagtype = ul_magic_test();
+
+ return tagtype;
+}
+
+int CmdHF14AMfUInfo(const char *Cmd){
+
+ uint8_t authlim = 0xff;
+ uint8_t data[16] = {0x00};
+ iso14a_card_select_t card;
+ uint8_t *key;
+ int status;
+
+ TagTypeUL_t tagtype = GetHF14AMfU_Type();
+ if (tagtype == UL_ERROR) return -1;
+
+ PrintAndLog("\n--- Tag Information ---------");
+ PrintAndLog("-------------------------------------------------------------");
+ ul_print_type(tagtype, 6);
+
+ status = ul_select(&card);
+ if ( status < 1 ){
+ PrintAndLog("Error: couldn't select");
+ ul_switch_off_field();
+ return status;
+ }
+
+ // read pages 0,1,2,4 (should read 4pages)
+ status = ul_read(0, data, sizeof(data));
+ if ( status == -1 ){
+ PrintAndLog("Error: tag didn't answer to READ");
+ return status;
+ }
+
+ ul_print_default(data);
+
+ if ((tagtype & UL_C)){
+
+ // read pages 0x28, 0x29, 0x2A, 0x2B
+ uint8_t ulc_conf[16] = {0x00};
+ status = ul_read(0x28, ulc_conf, sizeof(ulc_conf));
+ if ( status == -1 ){
+ PrintAndLog("Error: tag didn't answer to READ - possibly locked");
+ return status;
+ }
+ ulc_print_configuration(ulc_conf);
+
+ if ((tagtype & MAGIC)){
+
+ uint8_t ulc_deskey[16] = {0x00};
+ status = ul_read(0x2C, ulc_deskey, sizeof(ulc_deskey));
+ if ( status == -1 ){
+ PrintAndLog("Error: tag didn't answer to READ magic");
+ return status;
+ }
+ ulc_print_3deskey(ulc_deskey);
+
+ } else {
+ PrintAndLog("Trying some default 3des keys");
+ ul_switch_off_field();
+ for (uint8_t i = 0; i < 7; ++i ){
+ key = default_3des_keys[i];
+ if (try3DesAuthentication(key) == 1){
+ PrintAndLog("Found default 3des key: "); //%s", sprint_hex(key,16));
+ ulc_print_3deskey(SwapEndian64(key,16));
+ return 0;
+ }
+ }
+ }
+ }
+
+ if ((tagtype & (UL_EV1_48 | UL_EV1_128))) {
+ //do counters and signature first (don't neet auth)
+ ulev1_print_counters();
+
+ uint8_t ulev1_signature[32] = {0x00};
+ status = ulev1_readSignature( ulev1_signature, sizeof(ulev1_signature));
+ if ( status == -1 ){
+ PrintAndLog("Error: tag didn't answer to READ SIGNATURE");
+ return status;
+ }
+ ulev1_print_signature( ulev1_signature, sizeof(ulev1_signature));
+
+ uint8_t startconfigblock = (tagtype & UL_EV1_48) ? 0x10 : 0x25;
+ uint8_t ulev1_conf[16] = {0x00};
+ status = ul_read(startconfigblock, ulev1_conf, sizeof(ulev1_conf));
+ if ( status == -1 ){
+ PrintAndLog("Error: tag didn't answer to READ EV1");
+ return status;
+ }
+ // save AUTHENTICATION LIMITS for later:
+ authlim = (ulev1_conf[4] & 0x07);
+ ulev1_print_configuration(ulev1_conf);
+ }
+
+ if ((tagtype & (UL_EV1_48 | UL_EV1_128 | NTAG_213 | NTAG_215 | NTAG_216))) {
+
+ uint8_t version[10] = {0x00};
+ status = ulev1_getVersion(version, sizeof(version));
+ if ( status == -1 ){
+ PrintAndLog("Error: tag didn't answer to GETVERSION");
+ return status;
+ }
+ ulev1_print_version(version);
+
+ // AUTHLIMIT, (number of failed authentications)
+ // 0 = limitless.
+ // 1-7 = ... should we even try then?
+ if ( authlim == 0 ){
+ PrintAndLog("\n--- Known EV1/NTAG passwords.");
+
+ uint8_t pack[4] = {0,0,0,0};
+ int len=0; //if len goes to -1 the connection will be turned off.
+ for (uint8_t i = 0; i < 3; ++i ){
+ key = default_pwd_pack[i];
+ if ( len > -1 ){
+ len = ulev1_requestAuthentication(key, pack, sizeof(pack));
+ PrintAndLog("Found a default password: %s || Pack: %02X %02X",sprint_hex(key, 4), pack[0], pack[1]);
+ break;
+ }
+ }
+ if (len > -1) ul_switch_off_field();
+ }
+ }
+
+ if ((tagtype & (NTAG_213 | NTAG_215 | NTAG_216))){
+
+ uint8_t cc[16] = {0x00};
+ status = ul_read(3, cc, sizeof(cc));
+ if ( status == -1 ){
+ PrintAndLog("Error: tag didn't answer to READ ntag");
+ return status;
+ }
+ ntag_print_CC(cc);
+ }
- PrintAndLog("Seems to be a Ultralight %s", (len==0) ? "-C" :"");
+ ul_switch_off_field();
+ PrintAndLog("");
return 0;
}
blockNo = param_get8(Cmd, 0);
- if (blockNo > MAX_ULTRA_BLOCKS){
+ if (blockNo > MAX_UL_BLOCKS){
PrintAndLog("Error: Maximum number of blocks is 15 for Ultralight Cards!");
return 1;
}
// Mifare Ultralight Read Single Block
//
int CmdHF14AMfURdBl(const char *Cmd){
-
- uint8_t blockNo = -1;
+ UsbCommand resp;
+ uint8_t blockNo = -1;
char cmdp = param_getchar(Cmd, 0);
if (strlen(Cmd) < 1 || cmdp == 'h' || cmdp == 'H') {
PrintAndLog("Usage: hf mfu rdbl <block number>");
PrintAndLog(" sample: hfu mfu rdbl 0");
return 0;
- }
-
+ }
+
blockNo = param_get8(Cmd, 0);
- if (blockNo > MAX_ULTRA_BLOCKS){
- PrintAndLog("Error: Maximum number of blocks is 15 for Ultralight Cards!");
- return 1;
+ if (blockNo > MAX_UL_BLOCKS){
+ PrintAndLog("Error: Maximum number of blocks is 15 for Ultralight");
+ return 1;
}
-
- PrintAndLog("--block no:0x%02X (%d)", (int)blockNo, blockNo);
+
UsbCommand c = {CMD_MIFAREU_READBL, {blockNo}};
SendCommand(&c);
- UsbCommand resp;
+
if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- uint8_t * data = resp.d.asBytes;
-
- PrintAndLog("isOk: %02x", isOK);
-
- if (isOK)
- PrintAndLog("Data: %s", sprint_hex(data, 4));
+ uint8_t isOK = resp.arg[0] & 0xff;
+ if (isOK) {
+ uint8_t *data = resp.d.asBytes;
+ PrintAndLog("Block: %0d (0x%02X) [ %s]", (int)blockNo, blockNo, sprint_hex(data, 4));
+ }
+ else {
+ PrintAndLog("Failed reading block: (%02x)", isOK);
+ }
} else {
- PrintAndLog("Command execute timeout");
+ PrintAndLog("Command execute time-out");
}
+
return 0;
}
+int usage_hf_mfu_dump(void)
+{
+ PrintAndLog("Reads all pages from Ultralight, Ultralight-C, Ultralight EV1");
+ PrintAndLog("and saves binary dump into the file `filename.bin` or `cardUID.bin`");
+ PrintAndLog("It autodetects card type.\n");
+ PrintAndLog("Usage: hf mfu dump k <key> n <filename w/o .bin>");
+ PrintAndLog(" Options : ");
+ PrintAndLog(" k <key> : Enter key for authentication");
+ PrintAndLog(" n <FN > : Enter filename w/o .bin to save the dump as");
+ PrintAndLog(" s : Swap entered key's endianness for auth");
+ PrintAndLog("");
+ PrintAndLog(" sample : hf mfu dump");
+ PrintAndLog(" : hf mfu dump n myfile");
+ return 0;
+}
//
-// Mifare Ultralight / Ultralight-C; Read and Dump Card Contents
+// Mifare Ultralight / Ultralight-C / Ultralight-EV1
+// Read and Dump Card Contents, using auto detection of tag size.
//
+// TODO: take a password to read UL-C / UL-EV1 tags.
int CmdHF14AMfUDump(const char *Cmd){
FILE *fout;
char filename[FILE_PATH_SIZE] = {0x00};
- char * fnameptr = filename;
-
+ char *fnameptr = filename;
+ char *str = "Dumping Ultralight%s%s Card Data...";
uint8_t *lockbytes_t = NULL;
uint8_t lockbytes[2] = {0x00};
-
uint8_t *lockbytes_t2 = NULL;
uint8_t lockbytes2[2] = {0x00};
-
bool bit[16] = {0x00};
bool bit2[16] = {0x00};
-
- int i;
- uint8_t BlockNo = 0;
- int Pages = 16;
+ uint8_t data[1024] = {0x00};
+ bool hasPwd = false;
+ int i = 0;
+ int Pages = 16;
+ bool tmplockbit = false;
+ uint8_t dataLen=0;
+ uint8_t cmdp =0;
+ uint8_t key[16] = {0x00};
+ uint8_t *keyPtr = key;
+ size_t fileNlen = 0;
+ bool errors = false;
+ bool swapEndian = false;
- bool tmplockbit = false;
- uint8_t isOK = 0;
- uint8_t *data = NULL;
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ case 'H':
+ return usage_hf_mfu_dump();
+ case 'k':
+ case 'K':
+ dataLen = param_gethex(Cmd, cmdp+1, data, 32);
+ if (dataLen) {
+ errors = true;
+ } else {
+ memcpy(key, data, 16);
+ }
+ cmdp += 2;
+ hasPwd = true;
+ break;
+ case 'n':
+ case 'N':
+ fileNlen = param_getstr(Cmd, cmdp+1, filename);
+ if (!fileNlen) errors = true;
+ if (fileNlen > FILE_PATH_SIZE-5) fileNlen = FILE_PATH_SIZE-5;
+ cmdp += 2;
+ break;
+ case 's':
+ swapEndian = true;
+ cmdp++;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ if(errors) break;
+ }
- char cmdp = param_getchar(Cmd, 0);
-
- if (cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Reads all pages from Mifare Ultralight or Ultralight-C tag.");
- PrintAndLog("It saves binary dump into the file `filename.bin` or `cardUID.bin`");
- PrintAndLog("Usage: hf mfu dump <c> <filename w/o .bin>");
- PrintAndLog(" <c> optional cardtype c == Ultralight-C, if not defaults to Ultralight");
- PrintAndLog(" sample: hf mfu dump");
- PrintAndLog(" : hf mfu dump myfile");
- PrintAndLog(" : hf mfu dump c myfile");
- return 0;
+ //Validations
+ if(errors) return usage_hf_mfu_dump();
+
+ if (swapEndian)
+ keyPtr = SwapEndian64(data, 16);
+
+ TagTypeUL_t tagtype = GetHF14AMfU_Type();
+ if (tagtype == UL_ERROR) return -1;
+
+ if ( tagtype & UL ) {
+ Pages = 16;
+ PrintAndLog(str,"", (tagtype & MAGIC)?" (magic)":"" );
+ }
+ else if ( tagtype & UL_C ) {
+ Pages = 44;
+ PrintAndLog(str,"-C", (tagtype & MAGIC)?" (magic)":"" );
+ }
+ else if ( tagtype & UL_EV1_48 ) {
+ Pages = 18;
+ PrintAndLog(str," EV1_48","");
+ }
+ else if ( tagtype & UL_EV1_128 ) {
+ Pages = 32;
+ PrintAndLog(str," EV1_128","");
+ } else {
+ Pages = 16;
+ PrintAndLog("Dumping unknown Ultralight, using default values.");
}
- // UL or UL-C?
- Pages = (cmdp == 'c' || cmdp == 'C') ? 44 : 16;
-
- PrintAndLog("Dumping Ultralight%s Card Data...", (Pages ==16)?"":"-C");
-
- UsbCommand c = {CMD_MIFAREU_READCARD, {BlockNo,Pages}};
+ UsbCommand c = {CMD_MIFAREUC_READCARD, {0,Pages}};
+ if ( hasPwd ) {
+ c.arg[2] = 1;
+ memcpy(c.d.asBytes, key, 16);
+ }
SendCommand(&c);
UsbCommand resp;
-
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- isOK = resp.arg[0] & 0xff;
- if (!isOK) {
- PrintAndLog("Command error");
- return 0;
- }
- data = resp.d.asBytes;
+ if (!WaitForResponseTimeout(CMD_ACK, &resp,1500)) {
+ PrintAndLog("Command execute time-out");
+ return 1;
+ }
+ PrintAndLog ("%u,%u",resp.arg[0],resp.arg[1]);
+ uint8_t isOK = resp.arg[0] & 0xff;
+ if (isOK) {
+ memcpy(data, resp.d.asBytes, resp.arg[1]);
} else {
- PrintAndLog("Command execute timeout");
- return 0;
+ PrintAndLog("Failed reading block: (%02x)", i);
+ return 1;
}
-
+
// Load lock bytes.
int j = 0;
-
+
lockbytes_t = data + 8;
lockbytes[0] = lockbytes_t[2];
lockbytes[1] = lockbytes_t[3];
for(j = 0; j < 16; j++){
bit[j] = lockbytes[j/8] & ( 1 <<(7-j%8));
- }
-
+ }
+
// Load bottom lockbytes if available
if ( Pages == 44 ) {
-
lockbytes_t2 = data + (40*4);
lockbytes2[0] = lockbytes_t2[2];
lockbytes2[1] = lockbytes_t2[3];
}
}
+ // add keys
+ if (hasPwd){
+ memcpy(data + Pages*4, key, 16);
+ Pages += 4;
+ }
for (i = 0; i < Pages; ++i) {
-
if ( i < 3 ) {
PrintAndLog("Block %02x:%s ", i,sprint_hex(data + i * 4, 4));
continue;
}
-
switch(i){
case 3: tmplockbit = bit[4]; break;
case 4: tmplockbit = bit[3]; break;
}
PrintAndLog("Block %02x:%s [%d]", i,sprint_hex(data + i * 4, 4),tmplockbit);
}
-
- int len = 0;
- if ( Pages == 16 )
- len = param_getstr(Cmd,0,filename);
- else
- len = param_getstr(Cmd,1,filename);
-
- if (len > FILE_PATH_SIZE-5) len = FILE_PATH_SIZE-5;
// user supplied filename?
- if (len < 1) {
-
+ if (fileNlen < 1) {
// UID = data 0-1-2 4-5-6-7 (skips a beat)
sprintf(fnameptr,"%02X%02X%02X%02X%02X%02X%02X.bin",
data[0],data[1], data[2], data[4],data[5],data[6], data[7]);
-
} else {
- sprintf(fnameptr + len," .bin");
+ sprintf(fnameptr + fileNlen," .bin");
}
-
if ((fout = fopen(filename,"wb")) == NULL) {
PrintAndLog("Could not create file name %s", filename);
return 1;
//
int CmdHF14AMfucAuth(const char *Cmd){
- uint8_t default_keys[5][16] = {
- { 0x42,0x52,0x45,0x41,0x4b,0x4d,0x45,0x49,0x46,0x59,0x4f,0x55,0x43,0x41,0x4e,0x21 },// 3des std key
- { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 },// all zeroes
- { 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f },// 0x00-0x0F
- { 0x49,0x45,0x4D,0x4B,0x41,0x45,0x52,0x42,0x21,0x4E,0x41,0x43,0x55,0x4F,0x59,0x46 },// NFC-key
- { 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01 } // all ones
- };
-
- char cmdp = param_getchar(Cmd, 0);
-
uint8_t keyNo = 0;
bool errors = false;
+
+ char cmdp = param_getchar(Cmd, 0);
+
//Change key to user defined one
if (cmdp == 'k' || cmdp == 'K'){
keyNo = param_get8(Cmd, 1);
- if(keyNo >= 4) errors = true;
+ if(keyNo > 6)
+ errors = true;
}
- if (cmdp == 'h' || cmdp == 'H') {
+ if (cmdp == 'h' || cmdp == 'H')
errors = true;
- }
-
+
if (errors) {
PrintAndLog("Usage: hf mfu cauth k <key number>");
PrintAndLog(" 0 (default): 3DES standard key");
- PrintAndLog(" 1 : all zeros key");
+ PrintAndLog(" 1 : all 0x00 key");
PrintAndLog(" 2 : 0x00-0x0F key");
PrintAndLog(" 3 : nfc key");
- PrintAndLog(" 4 : all ones key");
- PrintAndLog(" sample : hf mfu cauth k");
+ PrintAndLog(" 4 : all 0x01 key");
+ PrintAndLog(" 5 : all 0xff key");
+ PrintAndLog(" 6 : 0x00-0xFF key");
+ PrintAndLog("\n sample : hf mfu cauth k");
PrintAndLog(" : hf mfu cauth k 3");
return 0;
}
- uint8_t random_a[8] = { 1,1,1,1,1,1,1,1 };
- //uint8_t enc_random_a[8] = { 0 };
- uint8_t random_b[8] = { 0 };
- uint8_t enc_random_b[8] = { 0 };
- uint8_t random_a_and_b[16] = { 0 };
- des3_context ctx = { 0 };
- uint8_t *key = default_keys[keyNo];
+ uint8_t *key = default_3des_keys[keyNo];
+ if (try3DesAuthentication(key)>0)
+ PrintAndLog("Authentication successful. 3des key: %s",sprint_hex(key, 16));
+ else
+ PrintAndLog("Authentication failed");
+
+ return 0;
+}
+
+int try3DesAuthentication( uint8_t *key){
+
uint8_t blockNo = 0;
uint32_t cuid = 0;
- //Auth1
+ des3_context ctx = { 0 };
+
+ uint8_t random_a[8] = { 1,1,1,1,1,1,1,1 };
+ uint8_t random_b[8] = { 0 };
+ uint8_t enc_random_b[8] = { 0 };
+ uint8_t rnd_ab[16] = { 0 };
+ uint8_t iv[8] = { 0 };
+
UsbCommand c = {CMD_MIFAREUC_AUTH1, {blockNo}};
SendCommand(&c);
UsbCommand resp;
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- cuid = resp.arg[1];
- uint8_t * data= resp.d.asBytes;
-
- if (isOK){
- PrintAndLog("enc(RndB):%s", sprint_hex(data+1, 8));
- memcpy(enc_random_b,data+1,8);
- } else {
- PrintAndLog("Auth failed");
- return 2; // auth failed.
- }
- } else {
- PrintAndLog("Command execute timeout");
- return 1;
- }
-
- uint8_t iv[8] = { 0 };
- // Do we need random ? Right now we use all ones, is that random enough ?
-// DES_random_key(&RndA);
-
- PrintAndLog(" RndA :%s",sprint_hex(random_a, 8));
- PrintAndLog(" e_RndB:%s",sprint_hex(enc_random_b, 8));
+ if ( !WaitForResponseTimeout(CMD_ACK, &resp, 1500) ) return -1;
+ if ( !(resp.arg[0] & 0xff) ) return -2;
+
+ cuid = resp.arg[1];
+ memcpy(enc_random_b,resp.d.asBytes+1,8);
des3_set2key_dec(&ctx, key);
-
- des3_crypt_cbc(&ctx // des3_context *ctx
- , DES_DECRYPT // int mode
- , sizeof(random_b) // size_t length
- , iv // unsigned char iv[8]
- , enc_random_b // const unsigned char *input
- , random_b // unsigned char *output
- );
-
- PrintAndLog(" RndB:%s",sprint_hex(random_b, 8));
+ // context, mode, length, IV, input, output
+ des3_crypt_cbc( &ctx, DES_DECRYPT, sizeof(random_b), iv , enc_random_b , random_b);
rol(random_b,8);
- memcpy(random_a_and_b ,random_a,8);
- memcpy(random_a_and_b+8,random_b,8);
-
- PrintAndLog(" RA+B:%s",sprint_hex(random_a_and_b, 16));
+ memcpy(rnd_ab ,random_a,8);
+ memcpy(rnd_ab+8,random_b,8);
des3_set2key_enc(&ctx, key);
-
- des3_crypt_cbc(&ctx // des3_context *ctx
- , DES_ENCRYPT // int mode
- , sizeof(random_a_and_b) // size_t length
- , enc_random_b // unsigned char iv[8]
- , random_a_and_b // const unsigned char *input
- , random_a_and_b // unsigned char *output
- );
-
- PrintAndLog("enc(RA+B):%s",sprint_hex(random_a_and_b, 16));
+ // context, mode, length, IV, input, output
+ des3_crypt_cbc(&ctx, DES_ENCRYPT, sizeof(rnd_ab), enc_random_b, rnd_ab, rnd_ab);
//Auth2
- UsbCommand d = {CMD_MIFAREUC_AUTH2, {cuid}};
- memcpy(d.d.asBytes,random_a_and_b, 16);
- SendCommand(&d);
+ c.cmd = CMD_MIFAREUC_AUTH2;
+ c.arg[0] = cuid;
+ memcpy(c.d.asBytes, rnd_ab, 16);
+ SendCommand(&c);
- UsbCommand respb;
- if (WaitForResponseTimeout(CMD_ACK,&respb,1500)) {
- uint8_t isOK = respb.arg[0] & 0xff;
- uint8_t * data2= respb.d.asBytes;
+ if ( !WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return -1;
+ if ( !(resp.arg[0] & 0xff)) return -2;
+
+ uint8_t enc_resp[8] = { 0 };
+ uint8_t resp_random_a[8] = { 0 };
+ memcpy(enc_resp, resp.d.asBytes+1, 8);
- if (isOK){
- PrintAndLog("enc(RndA'):%s", sprint_hex(data2+1, 8));
- } else {
- return 2;
- }
-
- } else {
- PrintAndLog("Command execute timeout");
- return 1;
- }
+ des3_set2key_dec(&ctx, key);
+ // context, mode, length, IV, input, output
+ des3_crypt_cbc( &ctx, DES_DECRYPT, 8, enc_random_b, enc_resp, resp_random_a);
+
+ if ( !memcmp(resp_random_a, random_a, 8))
+ return 1;
return 0;
+
+ //PrintAndLog(" RndA :%s", sprint_hex(random_a, 8));
+ //PrintAndLog(" enc(RndB) :%s", sprint_hex(enc_random_b, 8));
+ //PrintAndLog(" RndB :%s", sprint_hex(random_b, 8));
+ //PrintAndLog(" A+B :%s", sprint_hex(random_a_and_b, 16));
+ //PrintAndLog(" enc(A+B) :%s", sprint_hex(random_a_and_b, 16));
+ //PrintAndLog(" enc(RndA') :%s", sprint_hex(data2+1, 8));
}
+
/**
A test function to validate that the polarssl-function works the same
was as the openssl-implementation.
return 0;
}
**/
+
//
// Ultralight C Read Single Block
//
int CmdHF14AMfUCRdBl(const char *Cmd)
{
+ UsbCommand resp;
+ bool hasPwd = FALSE;
uint8_t blockNo = -1;
+ uint8_t key[16];
char cmdp = param_getchar(Cmd, 0);
-
+
if (strlen(Cmd) < 1 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: hf mfu crdbl <block number>");
- PrintAndLog(" sample: hf mfu crdbl 0");
+ PrintAndLog("Usage: hf mfu crdbl <block number> <key>");
+ PrintAndLog("");
+ PrintAndLog("sample: hf mfu crdbl 0");
+ PrintAndLog(" hf mfu crdbl 0 00112233445566778899AABBCCDDEEFF");
return 0;
- }
-
+ }
+
blockNo = param_get8(Cmd, 0);
if (blockNo < 0) {
PrintAndLog("Wrong block number");
return 1;
}
-
- if (blockNo > MAX_ULTRAC_BLOCKS ){
- PrintAndLog("Error: Maximum number of readable blocks is 47 for Ultralight-C Cards!");
+
+ if (blockNo > MAX_ULC_BLOCKS ){
+ PrintAndLog("Error: Maximum number of blocks is 47 for Ultralight-C");
return 1;
}
- PrintAndLog("--block no: 0x%02X (%d)", (int)blockNo, blockNo);
+ // key
+ if ( strlen(Cmd) > 3){
+ if (param_gethex(Cmd, 1, key, 32)) {
+ PrintAndLog("Key must include %d HEX symbols", 32);
+ return 1;
+ } else {
+ hasPwd = TRUE;
+ }
+ }
+ //uint8_t *key2 = SwapEndian64(key, 16);
//Read Block
- UsbCommand e = {CMD_MIFAREU_READBL, {blockNo}};
- SendCommand(&e);
- UsbCommand resp_c;
- if (WaitForResponseTimeout(CMD_ACK,&resp_c,1500)) {
- uint8_t isOK = resp_c.arg[0] & 0xff;
- uint8_t *data = resp_c.d.asBytes;
-
- PrintAndLog("isOk: %02x", isOK);
- if (isOK)
- PrintAndLog("Data: %s", sprint_hex(data, 4));
-
+ UsbCommand c = {CMD_MIFAREU_READBL, {blockNo}};
+ if ( hasPwd ) {
+ c.arg[1] = 1;
+ memcpy(c.d.asBytes,key,16);
+ }
+ SendCommand(&c);
+
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
+ uint8_t isOK = resp.arg[0] & 0xff;
+ if (isOK) {
+ uint8_t *data = resp.d.asBytes;
+ PrintAndLog("Block: %0d (0x%02X) [ %s]", (int)blockNo, blockNo, sprint_hex(data, 4));
+ }
+ else {
+ PrintAndLog("Failed reading block: (%02x)", isOK);
+ }
} else {
- PrintAndLog("Command execute timeout");
+ PrintAndLog("Command execute time-out");
}
return 0;
}
}
blockNo = param_get8(Cmd, 0);
- if (blockNo > MAX_ULTRAC_BLOCKS ){
+ if (blockNo > MAX_ULC_BLOCKS ){
PrintAndLog("Error: Maximum number of blocks is 47 for Ultralight-C Cards!");
return 1;
}
PrintAndLog("Block data must include 8 HEX symbols");
return 1;
}
-
+
if (strchr(Cmd,'w') != 0 || strchr(Cmd,'W') != 0 ) {
chinese_card = TRUE;
}
-
+
if ( blockNo <= 3 ) {
if (!chinese_card){
- PrintAndLog("Access Denied");
+ PrintAndLog("Access Denied");
+ return 1;
} else {
PrintAndLog("--Special block no: 0x%02x", blockNo);
PrintAndLog("--Data: %s", sprint_hex(bldata, 4));
PrintAndLog("isOk:%02x", isOK);
} else {
PrintAndLog("Command execute timeout");
- }
- }
+ return 1;
+ }
+ }
} else {
PrintAndLog("--Block no : 0x%02x", blockNo);
PrintAndLog("--Data: %s", sprint_hex(bldata, 4));
PrintAndLog("isOk : %02x", isOK);
} else {
PrintAndLog("Command execute timeout");
+ return 1;
}
}
return 0;
}
+//
+// Mifare Ultralight C - Set password
+//
+int CmdHF14AMfucSetPwd(const char *Cmd){
+
+ uint8_t pwd[16] = {0x00};
+
+ char cmdp = param_getchar(Cmd, 0);
+
+ if (strlen(Cmd) == 0 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: hf mfu setpwd <password (32 hex symbols)>");
+ PrintAndLog(" [password] - (32 hex symbols)");
+ PrintAndLog("");
+ PrintAndLog("sample: hf mfu setpwd 000102030405060708090a0b0c0d0e0f");
+ PrintAndLog("");
+ return 0;
+ }
+
+ if (param_gethex(Cmd, 0, pwd, 32)) {
+ PrintAndLog("Password must include 32 HEX symbols");
+ return 1;
+ }
+
+ UsbCommand c = {CMD_MIFAREUC_SETPWD};
+ memcpy( c.d.asBytes, pwd, 16);
+ SendCommand(&c);
+
+ UsbCommand resp;
+
+ if (WaitForResponseTimeout(CMD_ACK,&resp,1500) ) {
+ if ( (resp.arg[0] & 0xff) == 1)
+ PrintAndLog("Ultralight-C new password: %s", sprint_hex(pwd,16));
+ else{
+ PrintAndLog("Failed writing at block %d", resp.arg[1] & 0xff);
+ return 1;
+ }
+ }
+ else {
+ PrintAndLog("command execution time out");
+ return 1;
+ }
+
+ return 0;
+}
+
+//
+// Magic UL / UL-C tags - Set UID
+//
+int CmdHF14AMfucSetUid(const char *Cmd){
+
+ UsbCommand c;
+ UsbCommand resp;
+ uint8_t uid[7] = {0x00};
+ char cmdp = param_getchar(Cmd, 0);
+
+ if (strlen(Cmd) == 0 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: hf mfu setuid <uid (14 hex symbols)>");
+ PrintAndLog(" [uid] - (14 hex symbols)");
+ PrintAndLog("\nThis only works for Magic Ultralight tags.");
+ PrintAndLog("");
+ PrintAndLog("sample: hf mfu setuid 11223344556677");
+ PrintAndLog("");
+ return 0;
+ }
+
+ if (param_gethex(Cmd, 0, uid, 14)) {
+ PrintAndLog("UID must include 14 HEX symbols");
+ return 1;
+ }
+
+ // read block2.
+ c.cmd = CMD_MIFAREU_READBL;
+ c.arg[0] = 2;
+ SendCommand(&c);
+ if (!WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
+ PrintAndLog("Command execute timeout");
+ return 2;
+ }
+
+ // save old block2.
+ uint8_t oldblock2[4] = {0x00};
+ memcpy(resp.d.asBytes, oldblock2, 4);
+
+ // block 0.
+ c.cmd = CMD_MIFAREU_WRITEBL;
+ c.arg[0] = 0;
+ c.d.asBytes[0] = uid[0];
+ c.d.asBytes[1] = uid[1];
+ c.d.asBytes[2] = uid[2];
+ c.d.asBytes[3] = 0x88 ^ uid[0] ^ uid[1] ^ uid[2];
+ SendCommand(&c);
+ if (!WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
+ PrintAndLog("Command execute timeout");
+ return 3;
+ }
+
+ // block 1.
+ c.arg[0] = 1;
+ c.d.asBytes[0] = uid[3];
+ c.d.asBytes[1] = uid[4];
+ c.d.asBytes[2] = uid[5];
+ c.d.asBytes[3] = uid[6];
+ SendCommand(&c);
+ if (!WaitForResponseTimeout(CMD_ACK,&resp,1500) ) {
+ PrintAndLog("Command execute timeout");
+ return 4;
+ }
+
+ // block 2.
+ c.arg[0] = 2;
+ c.d.asBytes[0] = uid[3] ^ uid[4] ^ uid[5] ^ uid[6];
+ c.d.asBytes[1] = oldblock2[1];
+ c.d.asBytes[2] = oldblock2[2];
+ c.d.asBytes[3] = oldblock2[3];
+ SendCommand(&c);
+ if (!WaitForResponseTimeout(CMD_ACK,&resp,1500) ) {
+ PrintAndLog("Command execute timeout");
+ return 5;
+ }
+
+ return 0;
+}
+
+int CmdHF14AMfuGenDiverseKeys(const char *Cmd){
+
+ uint8_t iv[8] = { 0x00 };
+ uint8_t block = 0x07;
+
+ // UL-EV1
+ //04 57 b6 e2 05 3f 80 UID
+ //4a f8 4b 19 PWD
+ uint8_t uid[] = { 0xF4,0xEA, 0x54, 0x8E };
+ uint8_t mifarekeyA[] = { 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5 };
+ uint8_t mifarekeyB[] = { 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5 };
+ uint8_t dkeyA[8] = { 0x00 };
+ uint8_t dkeyB[8] = { 0x00 };
+
+ uint8_t masterkey[] = { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xaa,0xbb,0xcc,0xdd,0xee,0xff };
+
+ uint8_t mix[8] = { 0x00 };
+ uint8_t divkey[8] = { 0x00 };
+
+ memcpy(mix, mifarekeyA, 4);
+
+ mix[4] = mifarekeyA[4] ^ uid[0];
+ mix[5] = mifarekeyA[5] ^ uid[1];
+ mix[6] = block ^ uid[2];
+ mix[7] = uid[3];
+
+ des3_context ctx = { 0x00 };
+ des3_set2key_enc(&ctx, masterkey);
+
+ des3_crypt_cbc(&ctx // des3_context
+ , DES_ENCRYPT // int mode
+ , sizeof(mix) // length
+ , iv // iv[8]
+ , mix // input
+ , divkey // output
+ );
+
+ PrintAndLog("3DES version");
+ PrintAndLog("Masterkey :\t %s", sprint_hex(masterkey,sizeof(masterkey)));
+ PrintAndLog("UID :\t %s", sprint_hex(uid, sizeof(uid)));
+ PrintAndLog("Sector :\t %0d", block);
+ PrintAndLog("Mifare key :\t %s", sprint_hex(mifarekeyA, sizeof(mifarekeyA)));
+ PrintAndLog("Message :\t %s", sprint_hex(mix, sizeof(mix)));
+ PrintAndLog("Diversified key: %s", sprint_hex(divkey+1, 6));
+
+ PrintAndLog("\n DES version");
+
+ for (int i=0; i < sizeof(mifarekeyA); ++i){
+ dkeyA[i] = (mifarekeyA[i] << 1) & 0xff;
+ dkeyA[6] |= ((mifarekeyA[i] >> 7) & 1) << (i+1);
+ }
+
+ for (int i=0; i < sizeof(mifarekeyB); ++i){
+ dkeyB[1] |= ((mifarekeyB[i] >> 7) & 1) << (i+1);
+ dkeyB[2+i] = (mifarekeyB[i] << 1) & 0xff;
+ }
+
+ uint8_t zeros[8] = {0x00};
+ uint8_t newpwd[8] = {0x00};
+ uint8_t dmkey[24] = {0x00};
+ memcpy(dmkey, dkeyA, 8);
+ memcpy(dmkey+8, dkeyB, 8);
+ memcpy(dmkey+16, dkeyA, 8);
+ memset(iv, 0x00, 8);
+
+ des3_set3key_enc(&ctx, dmkey);
+
+ des3_crypt_cbc(&ctx // des3_context
+ , DES_ENCRYPT // int mode
+ , sizeof(newpwd) // length
+ , iv // iv[8]
+ , zeros // input
+ , newpwd // output
+ );
+
+ PrintAndLog("Mifare dkeyA :\t %s", sprint_hex(dkeyA, sizeof(dkeyA)));
+ PrintAndLog("Mifare dkeyB :\t %s", sprint_hex(dkeyB, sizeof(dkeyB)));
+ PrintAndLog("Mifare ABA :\t %s", sprint_hex(dmkey, sizeof(dmkey)));
+ PrintAndLog("Mifare Pwd :\t %s", sprint_hex(newpwd, sizeof(newpwd)));
+
+ return 0;
+}
+
+// static uint8_t * diversify_key(uint8_t * key){
+
+ // for(int i=0; i<16; i++){
+ // if(i<=6) key[i]^=cuid[i];
+ // if(i>6) key[i]^=cuid[i%7];
+ // }
+ // return key;
+// }
+
+// static void GenerateUIDe( uint8_t *uid, uint8_t len){
+ // for (int i=0; i<len; ++i){
+
+ // }
+ // return;
+// }
+
//------------------------------------
// Menu Stuff
//------------------------------------
static command_t CommandTable[] =
{
- {"help", CmdHelp, 1,"This help"},
- {"dbg", CmdHF14AMfDbg, 0,"Set default debug mode"},
- {"info", CmdHF14AMfUInfo, 0,"Taginfo"},
- {"dump", CmdHF14AMfUDump, 0,"Dump MIFARE Ultralight / Ultralight-C tag to binary file"},
- {"rdbl", CmdHF14AMfURdBl, 0,"Read block - MIFARE Ultralight"},
- {"wrbl", CmdHF14AMfUWrBl, 0,"Write block - MIFARE Ultralight"},
- {"crdbl", CmdHF14AMfUCRdBl, 0,"Read block - MIFARE Ultralight C"},
- {"cwrbl", CmdHF14AMfUCWrBl, 0,"Write MIFARE Ultralight C block"},
- {"cauth", CmdHF14AMfucAuth, 0,"try a Ultralight C Authentication"},
- //{"testdes", CmdTestDES , 1, "Test DES"},
+ {"help", CmdHelp, 1, "This help"},
+ {"dbg", CmdHF14AMfDbg, 0, "Set default debug mode"},
+ {"info", CmdHF14AMfUInfo, 0, "Tag information"},
+ {"dump", CmdHF14AMfUDump, 0, "Dump Ultralight / Ultralight-C tag to binary file"},
+ {"rdbl", CmdHF14AMfURdBl, 0, "Read block - Ultralight"},
+ {"wrbl", CmdHF14AMfUWrBl, 0, "Write block - Ultralight"},
+ {"crdbl", CmdHF14AMfUCRdBl, 0, "Read block - Ultralight C"},
+ {"cwrbl", CmdHF14AMfUCWrBl, 0, "Write block - Ultralight C"},
+ {"cauth", CmdHF14AMfucAuth, 0, "Authentication - Ultralight C"},
+ {"setpwd", CmdHF14AMfucSetPwd, 1, "Set 3des password - Ultralight-C"},
+ {"setuid", CmdHF14AMfucSetUid, 1, "Set UID - MAGIC tags only"},
+ {"gen", CmdHF14AMfuGenDiverseKeys , 1, "Generate 3des mifare diversified keys"},
{NULL, NULL, 0, NULL}
};
int CmdHelp(const char *Cmd){
CmdsHelp(CommandTable);
return 0;
-}
\ No newline at end of file
+}
projects / proxmark3-svn / blobdiff