return ASKbiphaseDemod(Cmd, true);
}
-//could be split to a gProxII file
-//by marshmellow
-//attempts to demodulate and identify a G_Prox_II verex/chubb card
-//WARNING: if it fails during some points it will destroy the DemodBuffer data
-// but will leave the GraphBuffer intact.
-//if successful it will push askraw data back to demod buffer ready for emulation
-int CmdG_Prox_II_Demod(const char *Cmd)
-{
- if (!ASKbiphaseDemod(Cmd, false)){
- if (g_debugMode) PrintAndLog("Error gProxII: ASKbiphaseDemod failed 1st try");
- return 0;
- }
- size_t size = DemodBufferLen;
- //call lfdemod.c demod for gProxII
- int ans = gProxII_Demod(DemodBuffer, &size);
- if (ans < 0){
- if (g_debugMode) PrintAndLog("Error gProxII_Demod");
- return 0;
- }
- //got a good demod of 96 bits
- uint8_t ByteStream[8] = {0x00};
- uint8_t xorKey=0;
- size_t startIdx = ans + 6; //start after 6 bit preamble
-
- uint8_t bits_no_spacer[90];
- //so as to not mess with raw DemodBuffer copy to a new sample array
- memcpy(bits_no_spacer, DemodBuffer + startIdx, 90);
- // remove the 18 (90/5=18) parity bits (down to 72 bits (96-6-18=72))
- size_t bitLen = removeParity(bits_no_spacer, 0, 5, 3, 90); //source, startloc, paritylen, ptype, length_to_run
- if (bitLen != 72) {
- if (g_debugMode) PrintAndLog("Error gProxII: spacer removal did not produce 72 bits: %u, start: %u", bitLen, startIdx);
- return 0;
- }
- // get key and then get all 8 bytes of payload decoded
- xorKey = (uint8_t)bytebits_to_byteLSBF(bits_no_spacer, 8);
- for (size_t idx = 0; idx < 8; idx++) {
- ByteStream[idx] = ((uint8_t)bytebits_to_byteLSBF(bits_no_spacer+8 + (idx*8),8)) ^ xorKey;
- if (g_debugMode) PrintAndLog("byte %u after xor: %02x", (unsigned int)idx, ByteStream[idx]);
- }
- //now ByteStream contains 8 Bytes (64 bits) of decrypted raw tag data
- //
- uint8_t fmtLen = ByteStream[0]>>2;
- uint32_t FC = 0;
- uint32_t Card = 0;
- //get raw 96 bits to print
- uint32_t raw1 = bytebits_to_byte(DemodBuffer+ans,32);
- uint32_t raw2 = bytebits_to_byte(DemodBuffer+ans+32, 32);
- uint32_t raw3 = bytebits_to_byte(DemodBuffer+ans+64, 32);
-
- if (fmtLen==36){
- FC = ((ByteStream[3] & 0x7F)<<7) | (ByteStream[4]>>1);
- Card = ((ByteStream[4]&1)<<19) | (ByteStream[5]<<11) | (ByteStream[6]<<3) | (ByteStream[7]>>5);
- PrintAndLog("G-Prox-II Found: FmtLen %d, FC %u, Card %u", (int)fmtLen, FC, Card);
- } else if(fmtLen==26){
- FC = ((ByteStream[3] & 0x7F)<<1) | (ByteStream[4]>>7);
- Card = ((ByteStream[4]&0x7F)<<9) | (ByteStream[5]<<1) | (ByteStream[6]>>7);
- PrintAndLog("G-Prox-II Found: FmtLen %d, FC %u, Card %u", (int)fmtLen, FC, Card);
- } else {
- PrintAndLog("Unknown G-Prox-II Fmt Found: FmtLen %d",(int)fmtLen);
- PrintAndLog("Decoded Raw: %s", sprint_hex(ByteStream, 8));
- }
- PrintAndLog("Raw: %08x%08x%08x", raw1,raw2,raw3);
- setDemodBuf(DemodBuffer+ans, 96, 0);
- return 1;
-}
-
//by marshmellow - see ASKDemod
int Cmdaskrawdemod(const char *Cmd)
{
return FSKrawDemod(Cmd, true);
}
-//by marshmellow
-//Paradox Prox demod - FSK RF/50 with preamble of 00001111 (then manchester encoded)
-//print full Paradox Prox ID and some bit format details if found
-int CmdFSKdemodParadox(const char *Cmd)
-{
- //raw fsk demod no manchester decoding no start bit finding just get binary from wave
- uint32_t hi2=0, hi=0, lo=0;
-
- uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- size_t BitLen = getFromGraphBuf(BitStream);
- if (BitLen==0) return 0;
- //get binary from fsk wave
- int idx = ParadoxdemodFSK(BitStream,&BitLen,&hi2,&hi,&lo);
- if (idx<0){
- if (g_debugMode){
- if (idx==-1){
- PrintAndLog("DEBUG: Just Noise Detected");
- } else if (idx == -2) {
- PrintAndLog("DEBUG: Error demoding fsk");
- } else if (idx == -3) {
- PrintAndLog("DEBUG: Preamble not found");
- } else if (idx == -4) {
- PrintAndLog("DEBUG: Error in Manchester data");
- } else {
- PrintAndLog("DEBUG: Error demoding fsk %d", idx);
- }
- }
- return 0;
- }
- if (hi2==0 && hi==0 && lo==0){
- if (g_debugMode) PrintAndLog("DEBUG: Error - no value found");
- return 0;
- }
- uint32_t fc = ((hi & 0x3)<<6) | (lo>>26);
- uint32_t cardnum = (lo>>10)&0xFFFF;
- uint32_t rawLo = bytebits_to_byte(BitStream+idx+64,32);
- uint32_t rawHi = bytebits_to_byte(BitStream+idx+32,32);
- uint32_t rawHi2 = bytebits_to_byte(BitStream+idx,32);
-
- PrintAndLog("Paradox TAG ID: %x%08x - FC: %d - Card: %d - Checksum: %02x - RAW: %08x%08x%08x",
- hi>>10, (hi & 0x3)<<26 | (lo>>10), fc, cardnum, (lo>>2) & 0xFF, rawHi2, rawHi, rawLo);
- setDemodBuf(BitStream,BitLen,idx);
- if (g_debugMode){
- PrintAndLog("DEBUG: idx: %d, len: %d, Printing Demod Buffer:", idx, BitLen);
- printDemodBuff();
- }
- return 1;
-}
-
-// FDX-B ISO11784/85 demod (aka animal tag) BIPHASE, inverted, rf/32, with preamble of 00000000001 (128bits)
-// 8 databits + 1 parity (1)
-// CIITT 16 chksum
-// NATIONAL CODE, ICAR database
-// COUNTRY CODE (ISO3166) or http://cms.abvma.ca/uploads/ManufacturersISOsandCountryCodes.pdf
-// FLAG (animal/non-animal)
-/*
-38 IDbits
-10 country code
-1 extra app bit
-14 reserved bits
-1 animal bit
-16 ccitt CRC chksum over 64bit ID CODE.
-24 appli bits.
-
--- sample: 985121004515220 [ 37FF65B88EF94 ]
-*/
-int CmdFDXBdemodBI(const char *Cmd){
-
- int invert = 1;
- int clk = 32;
- int errCnt = 0;
- int maxErr = 0;
- uint8_t BitStream[MAX_DEMOD_BUF_LEN];
- size_t size = getFromGraphBuf(BitStream);
-
- errCnt = askdemod(BitStream, &size, &clk, &invert, maxErr, 0, 0);
- if ( errCnt < 0 || errCnt > maxErr ) {
- if (g_debugMode) PrintAndLog("DEBUG: no data or error found %d, clock: %d", errCnt, clk);
- return 0;
- }
-
- errCnt = BiphaseRawDecode(BitStream, &size, maxErr, 1);
- if (errCnt < 0 || errCnt > maxErr ) {
- if (g_debugMode) PrintAndLog("Error BiphaseRawDecode: %d", errCnt);
- return 0;
- }
-
- int preambleIndex = FDXBdemodBI(BitStream, &size);
- if (preambleIndex < 0){
- if (g_debugMode) PrintAndLog("Error FDXBDemod , no startmarker found :: %d",preambleIndex);
- return 0;
- }
- if (size != 128) {
- if (g_debugMode) PrintAndLog("Error incorrect data length found");
- return 0;
- }
-
- setDemodBuf(BitStream, 128, preambleIndex);
-
- // remove marker bits (1's every 9th digit after preamble) (pType = 2)
- size = removeParity(BitStream, preambleIndex + 11, 9, 2, 117);
- if ( size != 104 ) {
- if (g_debugMode) PrintAndLog("Error removeParity:: %d", size);
- return 0;
- }
- if (g_debugMode) {
- char *bin = sprint_bin_break(BitStream,size,16);
- PrintAndLog("DEBUG BinStream:\n%s",bin);
- }
- PrintAndLog("\nFDX-B / ISO 11784/5 Animal Tag ID Found:");
- if (g_debugMode) PrintAndLog("Start marker %d; Size %d", preambleIndex, size);
-
- //got a good demod
- uint64_t NationalCode = ((uint64_t)(bytebits_to_byteLSBF(BitStream+32,6)) << 32) | bytebits_to_byteLSBF(BitStream,32);
- uint32_t countryCode = bytebits_to_byteLSBF(BitStream+38,10);
- uint8_t dataBlockBit = BitStream[48];
- uint32_t reservedCode = bytebits_to_byteLSBF(BitStream+49,14);
- uint8_t animalBit = BitStream[63];
- uint32_t crc16 = bytebits_to_byteLSBF(BitStream+64,16);
- uint32_t extended = bytebits_to_byteLSBF(BitStream+80,24);
-
- uint64_t rawid = ((uint64_t)bytebits_to_byte(BitStream,32)<<32) | bytebits_to_byte(BitStream+32,32);
- uint8_t raw[8];
- num_to_bytes(rawid, 8, raw);
-
- if (g_debugMode) PrintAndLog("Raw ID Hex: %s", sprint_hex(raw,8));
-
- uint16_t calcCrc = crc16_ccitt_kermit(raw, 8);
- PrintAndLog("Animal ID: %04u-%012" PRIu64, countryCode, NationalCode);
- PrintAndLog("National Code: %012" PRIu64, NationalCode);
- PrintAndLog("CountryCode: %04u", countryCode);
- PrintAndLog("Extended Data: %s", dataBlockBit ? "True" : "False");
- PrintAndLog("reserved Code: %u", reservedCode);
- PrintAndLog("Animal Tag: %s", animalBit ? "True" : "False");
- PrintAndLog("CRC: 0x%04X - [%04X] - %s", crc16, calcCrc, (calcCrc == crc16) ? "Passed" : "Failed");
- PrintAndLog("Extended: 0x%X\n", extended);
-
- return 1;
-}
-
-
//by marshmellow
//attempt to psk1 demod graph buffer
int PSKDemod(const char *Cmd, bool verbose)
return 1;
}
-// Indala 26 bit decode
-// by marshmellow
-// optional arguments - same as CmdpskNRZrawDemod (clock & invert)
-int CmdIndalaDecode(const char *Cmd)
-{
- int ans;
- if (strlen(Cmd)>0){
- ans = PSKDemod(Cmd, 0);
- } else{ //default to RF/32
- ans = PSKDemod("32", 0);
- }
-
- if (!ans){
- if (g_debugMode)
- PrintAndLog("Error1: %d",ans);
- return 0;
- }
- uint8_t invert=0;
- size_t size = DemodBufferLen;
- int startIdx = indala26decode(DemodBuffer, &size, &invert);
- if (startIdx < 0 || size > 224) {
- if (g_debugMode)
- PrintAndLog("Error2: %d",ans);
- return -1;
- }
- setDemodBuf(DemodBuffer, size, (size_t)startIdx);
- if (invert)
- if (g_debugMode)
- PrintAndLog("Had to invert bits");
-
- PrintAndLog("BitLen: %d",DemodBufferLen);
- //convert UID to HEX
- uint32_t uid1, uid2, uid3, uid4, uid5, uid6, uid7;
- uid1=bytebits_to_byte(DemodBuffer,32);
- uid2=bytebits_to_byte(DemodBuffer+32,32);
- if (DemodBufferLen==64) {
- PrintAndLog("Indala UID=%s (%x%08x)", sprint_bin_break(DemodBuffer,DemodBufferLen,16), uid1, uid2);
- } else {
- uid3=bytebits_to_byte(DemodBuffer+64,32);
- uid4=bytebits_to_byte(DemodBuffer+96,32);
- uid5=bytebits_to_byte(DemodBuffer+128,32);
- uid6=bytebits_to_byte(DemodBuffer+160,32);
- uid7=bytebits_to_byte(DemodBuffer+192,32);
- PrintAndLog("Indala UID=%s (%x%08x%08x%08x%08x%08x%08x)",
- sprint_bin_break(DemodBuffer,DemodBufferLen,16), uid1, uid2, uid3, uid4, uid5, uid6, uid7);
- }
- if (g_debugMode){
- PrintAndLog("DEBUG: printing demodbuffer:");
- printDemodBuff();
- }
- return 1;
-}
-
-int CmdPSKNexWatch(const char *Cmd)
-{
- if (!PSKDemod("", false)) return 0;
- uint8_t preamble[28] = {0,0,0,0,0,1,0,1,0,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
- size_t startIdx = 0, size = DemodBufferLen;
- bool invert = false;
- if (!preambleSearch(DemodBuffer, preamble, sizeof(preamble), &size, &startIdx)){
- // if didn't find preamble try again inverting
- if (!PSKDemod("1", false)) return 0;
- size = DemodBufferLen;
- if (!preambleSearch(DemodBuffer, preamble, sizeof(preamble), &size, &startIdx)) return 0;
- invert = true;
- }
- if (size != 128) return 0;
- setDemodBuf(DemodBuffer, size, startIdx+4);
- startIdx = 8+32; //4 = extra i added, 8 = preamble, 32 = reserved bits (always 0)
- //get ID
- uint32_t ID = 0;
- for (uint8_t wordIdx=0; wordIdx<4; wordIdx++){
- for (uint8_t idx=0; idx<8; idx++){
- ID = (ID << 1) | DemodBuffer[startIdx+wordIdx+(idx*4)];
- }
- }
- //parity check (TBD)
-
- //checksum check (TBD)
-
- //output
- PrintAndLog("NexWatch ID: %d", ID);
- if (invert){
- PrintAndLog("Had to Invert - probably NexKey");
- for (uint8_t idx=0; idx<size; idx++)
- DemodBuffer[idx] ^= 1;
- }
-
- CmdPrintDemodBuff("x");
- return 1;
-}
-
// by marshmellow
// takes 3 arguments - clock, invert, maxErr as integers
// attempts to demodulate nrz only
{
{"help", CmdHelp, 1, "This help"},
{"askedgedetect", CmdAskEdgeDetect, 1, "[threshold] Adjust Graph for manual ask demod using the length of sample differences to detect the edge of a wave (use 20-45, def:25)"},
- {"askgproxiidemod", CmdG_Prox_II_Demod, 1, "Demodulate a G Prox II tag from GraphBuffer"},
{"autocorr", CmdAutoCorr, 1, "[window length] [g] -- Autocorrelation over window - g to save back to GraphBuffer (overwrite)"},
{"biphaserawdecode",CmdBiphaseDecodeRaw,1, "[offset] [invert<0|1>] [maxErr] -- Biphase decode bin stream in DemodBuffer (offset = 0|1 bits to shift the decode start)"},
{"bin2hex", Cmdbin2hex, 1, "bin2hex <digits> -- Converts binary to hexadecimal"},
{"buffclear", CmdBuffClear, 1, "Clear sample buffer and graph window"},
{"dec", CmdDec, 1, "Decimate samples"},
{"detectclock", CmdDetectClockRate, 1, "[modulation] Detect clock rate of wave in GraphBuffer (options: 'a','f','n','p' for ask, fsk, nrz, psk respectively)"},
- {"fdxbdemod", CmdFDXBdemodBI , 1, "Demodulate a FDX-B ISO11784/85 Biphase tag from GraphBuffer"},
//{"fskfcdetect", CmdFSKfcDetect, 1, "Try to detect the Field Clock of an FSK wave"},
- {"fskparadoxdemod", CmdFSKdemodParadox, 1, "Demodulate a Paradox FSK tag from GraphBuffer"},
{"getbitstream", CmdGetBitStream, 1, "Convert GraphBuffer's >=1 values to 1 and <1 to 0"},
{"grid", CmdGrid, 1, "<x> <y> -- overlay grid on graph window, use zero value to turn off either"},
{"hexsamples", CmdHexsamples, 0, "<bytes> [<offset>] -- Dump big buffer as hex bytes"},
{"norm", CmdNorm, 1, "Normalize max/min to +/-128"},
{"plot", CmdPlot, 1, "Show graph window (hit 'h' in window for keystroke help)"},
{"printdemodbuffer",CmdPrintDemodBuff, 1, "[x] [o] <offset> [l] <length> -- print the data in the DemodBuffer - 'x' for hex output"},
- {"pskindalademod", CmdIndalaDecode, 1, "[clock] [invert<0|1>] -- Demodulate an indala tag (PSK1) from GraphBuffer (args optional)"},
- {"psknexwatchdemod",CmdPSKNexWatch, 1, "Demodulate a NexWatch tag (nexkey, quadrakey) (PSK1) from GraphBuffer"},
{"rawdemod", CmdRawDemod, 1, "[modulation] ... <options> -see help (h option) -- Demodulate the data in the GraphBuffer and output binary"},
{"samples", CmdSamples, 0, "[512 - 40000] -- Get raw samples for graph window (GraphBuffer)"},
{"save", CmdSave, 1, "<filename> -- Save trace (from graph window)"},