#include "crapto1.h"
#include "mifareutil.h"
+#define SHORT_COIL() LOW(GPIO_SSC_DOUT)
+#define OPEN_COIL() HIGH(GPIO_SSC_DOUT)
+
void LFSetupFPGAForADC(int divisor, bool lf_field)
{
FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
{
uint8_t *dest = mifare_get_bigbufptr();
int n = 24000;
- int i;
-
+ int i = 0;
memset(dest, 0x00, n);
- i = 0;
+
for(;;) {
if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
AT91C_BASE_SSC->SSC_THR = 0x43;
{
if (b&(1<<i)) {
// stop modulating antenna
- LOW(GPIO_SSC_DOUT);
+ SHORT_COIL();
SpinDelayUs(1000);
// modulate antenna
- HIGH(GPIO_SSC_DOUT);
+ OPEN_COIL();
SpinDelayUs(1000);
} else {
// stop modulating antenna
- LOW(GPIO_SSC_DOUT);
+ SHORT_COIL();
SpinDelayUs(300);
// modulate antenna
- HIGH(GPIO_SSC_DOUT);
+ OPEN_COIL();
SpinDelayUs(1700);
}
}
void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
{
- int i;
+ int i = 0;
uint8_t *buff = (uint8_t *)BigBuf;
-
+
FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
-
- // Give it a bit of time for the resonant antenna to settle.
- SpinDelay(150);
-
+
+ // Configure output and enable pin that is connected to the FPGA (for modulating)
AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;
AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
+
AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK;
-
-#define SHORT_COIL() LOW(GPIO_SSC_DOUT)
-#define OPEN_COIL() HIGH(GPIO_SSC_DOUT)
-
- i = 0;
- for(;;) {
+
+ // Give it a bit of time for the resonant antenna to settle.
+ SpinDelay(30);
+
+ for(;;) {
+
while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {
- if(BUTTON_PRESS()) {
- DbpString("Stopped");
- return;
- }
- WDT_HIT();
+ if(BUTTON_PRESS()) {
+ DbpString("Stopped at 0");
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+ return;
+ }
+ WDT_HIT();
}
- if (ledcontrol)
- LED_D_ON();
-
- if(buff[i])
+ if ( buff[i] )
OPEN_COIL();
else
SHORT_COIL();
-
- if (ledcontrol)
- LED_D_OFF();
-
- while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {
- if(BUTTON_PRESS()) {
- DbpString("Stopped");
+
+ while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {
+ if(BUTTON_PRESS()) {
+ DbpString("Stopped at 1");
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
return;
}
WDT_HIT();
- }
+ }
- i++;
+ ++i;
if(i == period) {
i = 0;
if (gap) {
+ // turn of modulation
SHORT_COIL();
- SpinDelayUs(gap);
- }
+ // wait
+ SpinDelay(gap);
+ }
}
}
}
if (ledcontrol)
LED_A_ON();
+
SimulateTagLowFrequency(n, 0, ledcontrol);
if (ledcontrol)
LFSetupFPGAForADC(0, true);
while(!BUTTON_PRESS()) {
-
-
WDT_HIT();
if (ledcontrol) LED_A_ON();