//-----------------------------------------------------------------------------
// High frequency MIFARE ULTRALIGHT (C) commands
//-----------------------------------------------------------------------------
-#include "loclass/des.h"
+
#include "cmdhfmfu.h"
+
+#include <stdint.h>
+#include <stdio.h>
+#include "comms.h"
+#include "usb_cmd.h"
+#include "cmdmain.h"
+#include "ui.h"
+#include "mbedtls/des.h"
#include "cmdhfmf.h"
-#include "cmdhf14a.h"
+#include "cmdhf14a.h" // DropField()
#include "mifare.h"
#include "util.h"
+#include "util_posix.h"
#include "protocols.h"
-
-#define MAX_UL_BLOCKS 0x0f
-#define MAX_ULC_BLOCKS 0x2f
-#define MAX_ULEV1a_BLOCKS 0x0b
-#define MAX_ULEV1b_BLOCKS 0x20
-#define MAX_NTAG_213 0x2c
-#define MAX_NTAG_215 0x86
-#define MAX_NTAG_216 0xe6
+#include "taginfo.h"
typedef enum TAGTYPE_UL {
- UNKNOWN = 0x0000,
- UL = 0x0001,
- UL_C = 0x0002,
- UL_EV1_48 = 0x0004,
- UL_EV1_128 = 0x0008,
- NTAG = 0x0010,
- NTAG_213 = 0x0020,
- NTAG_215 = 0x0040,
- NTAG_216 = 0x0080,
- MY_D = 0x0100,
- MY_D_NFC = 0x0200,
- MY_D_MOVE = 0x0400,
- MY_D_MOVE_NFC = 0x0800,
- MAGIC = 0x1000,
+ UNKNOWN = 0x000000,
+ UL = 0x000001,
+ UL_C = 0x000002,
+ UL_EV1_48 = 0x000004,
+ UL_EV1_128 = 0x000008,
+ NTAG = 0x000010,
+ NTAG_203 = 0x000020,
+ NTAG_210 = 0x000040,
+ NTAG_212 = 0x000080,
+ NTAG_213 = 0x000100,
+ NTAG_215 = 0x000200,
+ NTAG_216 = 0x000400,
+ MY_D = 0x000800,
+ MY_D_NFC = 0x001000,
+ MY_D_MOVE = 0x002000,
+ MY_D_MOVE_LEAN= 0x004000,
+ NTAG_I2C_1K = 0x008000,
+ NTAG_I2C_2K = 0x010000,
+ FUDAN_UL = 0x020000,
+ MAGIC = 0x040000,
UL_MAGIC = UL | MAGIC,
UL_C_MAGIC = UL_C | MAGIC,
- UL_ERROR = 0xFFFF,
+ UL_ERROR = 0xFFFFFF,
} TagTypeUL_t;
+#define MAX_UL_BLOCKS 0x0f
+#define MAX_ULC_BLOCKS 0x2b
+#define MAX_ULEV1a_BLOCKS 0x13
+#define MAX_ULEV1b_BLOCKS 0x28
+#define MAX_NTAG_203 0x29
+#define MAX_NTAG_210 0x13
+#define MAX_NTAG_212 0x28
+#define MAX_NTAG_213 0x2c
+#define MAX_NTAG_215 0x86
+#define MAX_NTAG_216 0xe6
+#define MAX_MY_D_NFC 0xff
+#define MAX_MY_D_MOVE 0x25
+#define MAX_MY_D_MOVE_LEAN 0x0f
+
+#define PUBLIC_ECDA_KEYLEN 33
+static uint8_t public_ecda_key[PUBLIC_ECDA_KEYLEN] = {
+ 0x04, 0x49, 0x4e, 0x1a, 0x38, 0x6d, 0x3d, 0x3c,
+ 0xfe, 0x3d, 0xc1, 0x0e, 0x5d, 0xe6, 0x8a, 0x49,
+ 0x9b, 0x1c, 0x20, 0x2d, 0xb5, 0xb1, 0x32, 0x39,
+ 0x3e, 0x89, 0xed, 0x19, 0xfe, 0x5b, 0xe8, 0xbc,
+ 0x61
+};
+
#define KEYS_3DES_COUNT 7
-uint8_t default_3des_keys[KEYS_3DES_COUNT][16] = {
- { 0x42,0x52,0x45,0x41,0x4b,0x4d,0x45,0x49,0x46,0x59,0x4f,0x55,0x43,0x41,0x4e,0x21 },// 3des std key
- { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 },// all zeroes
- { 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f },// 0x00-0x0F
- { 0x49,0x45,0x4D,0x4B,0x41,0x45,0x52,0x42,0x21,0x4E,0x41,0x43,0x55,0x4F,0x59,0x46 },// NFC-key
- { 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01 },// all ones
- { 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF },// all FF
- { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD,0xEE,0xFF } // 11 22 33
+static uint8_t default_3des_keys[KEYS_3DES_COUNT][16] = {
+ { 0x42,0x52,0x45,0x41,0x4b,0x4d,0x45,0x49,0x46,0x59,0x4f,0x55,0x43,0x41,0x4e,0x21 },// 3des std key
+ { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 },// all zeroes
+ { 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f },// 0x00-0x0F
+ { 0x49,0x45,0x4D,0x4B,0x41,0x45,0x52,0x42,0x21,0x4E,0x41,0x43,0x55,0x4F,0x59,0x46 },// NFC-key
+ { 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01 },// all ones
+ { 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF },// all FF
+ { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD,0xEE,0xFF } // 11 22 33
};
-#define KEYS_PWD_COUNT 8
-uint8_t default_pwd_pack[KEYS_PWD_COUNT][4] = {
+#define KEYS_PWD_COUNT 6
+static uint8_t default_pwd_pack[KEYS_PWD_COUNT][4] = {
{0xFF,0xFF,0xFF,0xFF}, // PACK 0x00,0x00 -- factory default
{0x4A,0xF8,0x4B,0x19}, // PACK 0xE5,0xBE -- italian bus (sniffed)
{0x33,0x6B,0xA1,0x19}, // PACK 0x9c,0x2d -- italian bus (sniffed)
- {0xFF,0x90,0x6C,0xB2}, // PACK 0x12,0x9e -- italian bus (sniffed)
- {0x05,0x22,0xE6,0xB4}, // PACK 0x80,0x80 -- Amiiboo (sniffed) pikachu-b UID:
- {0x7E,0x22,0xE6,0xB4}, // PACK 0x80,0x80 -- AMiiboo (sniffed)
- {0x02,0xE1,0xEE,0x36}, // PACK 0x80,0x80 -- AMiiboo (sniffed) sonic UID: 04d257 7ae33e8027
- {0x32,0x0C,0x16,0x17}, // PACK 0x80,0x80 -- AMiiboo (sniffed)
+ {0xFF,0x90,0x6C,0xB2}, // PACK 0x12,0x9e -- italian bus (sniffed)
+ {0x46,0x1c,0xA3,0x19}, // PACK 0xE9,0x5A -- italian bus (sniffed)
+ {0x35,0x1C,0xD0,0x19}, // PACK 0x9A,0x5a -- italian bus (sniffed)
};
-static int CmdHelp(const char *Cmd);
+#define MAX_UL_TYPES 17
+static uint32_t UL_TYPES_ARRAY[MAX_UL_TYPES] = {UNKNOWN, UL, UL_C, UL_EV1_48, UL_EV1_128, NTAG, NTAG_203,
+ NTAG_210, NTAG_212, NTAG_213, NTAG_215, NTAG_216, MY_D, MY_D_NFC, MY_D_MOVE, MY_D_MOVE_LEAN, FUDAN_UL};
-char* getProductTypeStr( uint8_t id){
+static uint8_t UL_MEMORY_ARRAY[MAX_UL_TYPES] = {MAX_UL_BLOCKS, MAX_UL_BLOCKS, MAX_ULC_BLOCKS, MAX_ULEV1a_BLOCKS,
+ MAX_ULEV1b_BLOCKS, MAX_NTAG_203, MAX_NTAG_203, MAX_NTAG_210, MAX_NTAG_212, MAX_NTAG_213,
+ MAX_NTAG_215, MAX_NTAG_216, MAX_UL_BLOCKS, MAX_MY_D_NFC, MAX_MY_D_MOVE, MAX_MY_D_MOVE_LEAN, MAX_UL_BLOCKS};
+
+// get version nxp product type
+static char *getProductTypeStr( uint8_t id){
static char buf[20];
char *retStr = buf;
switch(id) {
- case 3:
- sprintf(retStr, "0x%02X %s", id, "(Ultralight)");
- break;
- case 4:
- sprintf(retStr, "0x%02X %s", id, "(NTAG)");
- break;
- default:
- sprintf(retStr, "0x%02X %s", id, "(unknown)");
- break;
+ case 3: sprintf(retStr, "%02X, Ultralight", id); break;
+ case 4: sprintf(retStr, "%02X, NTAG", id); break;
+ default: sprintf(retStr, "%02X, unknown", id); break;
}
return buf;
}
/*
- The 7 MSBits (=n) code the storage size itself based on 2^n,
+ The 7 MSBits (=n) code the storage size itself based on 2^n,
the LSBit is set to '0' if the size is exactly 2^n
- and set to '1' if the storage size is between 2^n and 2^(n+1).
+ and set to '1' if the storage size is between 2^n and 2^(n+1).
*/
-char* getUlev1CardSizeStr( uint8_t fsize ){
+static char *getUlev1CardSizeStr( uint8_t fsize ){
static char buf[40];
char *retStr = buf;
// is LSB set?
if ( fsize & 1 )
- sprintf(retStr, "%02X (%u <-> %u bytes)",fsize, usize, lsize);
- else
- sprintf(retStr, "%02X (%u bytes)", fsize, lsize);
+ sprintf(retStr, "%02X, (%u <-> %u bytes)",fsize, usize, lsize);
+ else
+ sprintf(retStr, "%02X, (%u bytes)", fsize, lsize);
return buf;
}
-static void ul_switch_on_field(void) {
- UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_CONNECT | ISO14A_NO_DISCONNECT, 0, 0}};
- SendCommand(&c);
-}
-
-static void ul_switch_off_field(void) {
- UsbCommand c = {CMD_READER_ISO_14443a, {0, 0, 0}};
- SendCommand(&c);
-}
-static int ul_send_cmd_raw( uint8_t *cmd, uint8_t cmdlen, uint8_t *response, uint16_t responseLength ) {
+static int ul_send_cmd_raw(uint8_t *cmd, uint8_t cmdlen, uint8_t *response, uint16_t responseLength) {
UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_RAW | ISO14A_NO_DISCONNECT | ISO14A_APPEND_CRC, cmdlen, 0}};
memcpy(c.d.asBytes, cmd, cmdlen);
+ clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return -1;
memcpy(response, resp.d.asBytes, resplen);
return resplen;
}
-/*
-static int ul_send_cmd_raw_crc( uint8_t *cmd, uint8_t cmdlen, uint8_t *response, uint16_t responseLength, bool append_crc ) {
- UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_RAW | ISO14A_NO_DISCONNECT , cmdlen, 0}};
- if (append_crc)
- c.arg[0] |= ISO14A_APPEND_CRC;
- memcpy(c.d.asBytes, cmd, cmdlen);
- SendCommand(&c);
- UsbCommand resp;
- if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return -1;
- if (!resp.arg[0] && responseLength) return -1;
- uint16_t resplen = (resp.arg[0] < responseLength) ? resp.arg[0] : responseLength;
- memcpy(response, resp.d.asBytes, resplen);
- return resplen;
-}
-*/
-static int ul_select( iso14a_card_select_t *card ){
+static int ul_select(iso14a_card_select_t *card, bool clear_trace) {
- ul_switch_on_field();
+ UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_CONNECT | ISO14A_NO_DISCONNECT | ISO14A_NO_RATS | (clear_trace?ISO14A_CLEAR_TRACE:0), 0, 0}};
+ clearCommandBuffer();
+ SendCommand(&c);
UsbCommand resp;
- if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return -1;
- if (resp.arg[0] < 1) return -1;
+ bool ans = false;
+ ans = WaitForResponseTimeout(CMD_ACK, &resp, 1500);
+ if (ans == 0 || resp.arg[0] == 0) {
+ PrintAndLogEx(WARNING, "iso14443a card select failed");
+ return 0;
+ }
memcpy(card, resp.d.asBytes, sizeof(iso14a_card_select_t));
- return resp.arg[0];
+ return 1;
}
-// This read command will at least return 16bytes.
-static int ul_read( uint8_t page, uint8_t *response, uint16_t responseLength ){
- uint8_t cmd[] = {ISO14443A_CMD_READBLOCK, page};
+// This read command will return 16 bytes.
+static int ul_read(uint8_t page, uint8_t *response, uint16_t responseLength) {
+ uint8_t cmd[] = {MIFARE_CMD_READBLOCK, page};
int len = ul_send_cmd_raw(cmd, sizeof(cmd), response, responseLength);
- if ( len == -1 )
- ul_switch_off_field();
return len;
}
-static int ul_comp_write( uint8_t page, uint8_t *data, uint8_t datalen ){
- uint8_t cmd[18];
- memset(cmd, 0x00, sizeof(cmd));
+static int ul_halt(void) {
+ uint8_t cmd[] = {ISO14443A_CMD_HALT, 0x00};
+ uint8_t response;
+ int len = ul_send_cmd_raw(cmd, sizeof(cmd), &response, sizeof(response));
+ return len;
+}
+
+
+static int ul_comp_write_ex(uint8_t page, uint8_t *data, uint8_t datalen, bool first_part_only) {
+
+ uint8_t cmd[18] = {0x00};
datalen = ( datalen > 16) ? 16 : datalen;
- cmd[0] = ISO14443A_CMD_WRITEBLOCK;
+ cmd[0] = MIFARE_CMD_WRITEBLOCK;
cmd[1] = page;
- memcpy(cmd+2, data, datalen);
-
- uint8_t response[1] = {0xff};
- int len = ul_send_cmd_raw(cmd, 2+datalen, response, sizeof(response));
- if ( len == -1 )
- ul_switch_off_field();
- // ACK
- if ( response[0] == 0x0a ) return 0;
- // NACK
- return -1;
+
+ uint8_t response = {0xff};
+ ul_send_cmd_raw(cmd, 2, &response, sizeof(response));
+ if (response != CARD_ACK)
+ return -1;
+ if (first_part_only)
+ return 0;
+
+ memcpy(cmd, data, datalen);
+ ul_send_cmd_raw(cmd, 16, &response, sizeof(response));
+ if (response != CARD_ACK)
+ return -1;
+
+ return 0;
}
-static int ulc_requestAuthentication( uint8_t blockNo, uint8_t *nonce, uint16_t nonceLength ){
- uint8_t cmd[] = {MIFARE_ULC_AUTH_1, blockNo};
+// not used yet
+// static int ul_comp_write(uint8_t page, uint8_t *data, uint8_t datalen) {
+ // return ul_comp_write_ex(page, data, datalen, false);
+// }
+
+
+static int ulc_requestAuthentication(uint8_t *nonce, uint16_t nonceLength) {
+
+ uint8_t cmd[] = {MIFARE_ULC_AUTH_1, 0x00};
int len = ul_send_cmd_raw(cmd, sizeof(cmd), nonce, nonceLength);
- if ( len == -1 )
- ul_switch_off_field();
return len;
}
-static int ulev1_requestAuthentication( uint8_t *pwd, uint8_t *pack, uint16_t packLength ){
+
+static int ulc_authentication(uint8_t *key, bool switch_off_field) {
+
+ UsbCommand c = {CMD_MIFAREUC_AUTH, {switch_off_field}};
+ memcpy(c.d.asBytes, key, 16);
+ clearCommandBuffer();
+ SendCommand(&c);
+ UsbCommand resp;
+ if ( !WaitForResponseTimeout(CMD_ACK, &resp, 1500) ) return 0;
+ if ( resp.arg[0] == 1 ) return 1;
+
+ return 0;
+}
+
+
+static int ulev1_requestAuthentication(uint8_t *pwd, uint8_t *pack, uint16_t packLength) {
uint8_t cmd[] = {MIFARE_ULEV1_AUTH, pwd[0], pwd[1], pwd[2], pwd[3]};
int len = ul_send_cmd_raw(cmd, sizeof(cmd), pack, packLength);
- if ( len == -1)
- ul_switch_off_field();
return len;
}
-static int ulev1_getVersion( uint8_t *response, uint16_t responseLength ){
- uint8_t cmd[] = {MIFARE_ULEV1_VERSION};
+static int ul_auth_select(iso14a_card_select_t *card, TagTypeUL_t tagtype, bool hasAuthKey, uint8_t *authenticationkey, uint8_t *pack, uint8_t packSize) {
+
+ if (hasAuthKey && (tagtype & UL_C)) {
+ //will select card automatically and close connection on error
+ if (!ulc_authentication(authenticationkey, false)) {
+ PrintAndLogEx(ERR, "Authentication Failed UL-C");
+ return 0;
+ }
+ } else {
+ if (!ul_select(card, false)) return 0;
+
+ if (hasAuthKey) {
+ if (ulev1_requestAuthentication(authenticationkey, pack, packSize) < 1) {
+ PrintAndLogEx(ERR, "Authentication Failed UL-EV1/NTAG");
+ return 0;
+ }
+ }
+ }
+ return 1;
+}
+
+static int ulev1_getVersion(uint8_t *response, uint16_t responseLength) {
+
+ uint8_t cmd[] = {MIFARE_ULEV1_VERSION};
int len = ul_send_cmd_raw(cmd, sizeof(cmd), response, responseLength);
- if ( len == -1 )
- ul_switch_off_field();
return len;
}
// static int ulev1_fastRead( uint8_t startblock, uint8_t endblock, uint8_t *response ){
-
+
// uint8_t cmd[] = {MIFARE_ULEV1_FASTREAD, startblock, endblock};
-
+
// if ( !ul_send_cmd_raw(cmd, sizeof(cmd), response)){
- // ul_switch_off_field();
// return -1;
// }
// return 0;
// }
-static int ulev1_readCounter( uint8_t counter, uint8_t *response, uint16_t responseLength ){
+
+static int ulev1_readCounter(uint8_t counter, uint8_t *response, uint16_t responseLength) {
uint8_t cmd[] = {MIFARE_ULEV1_READ_CNT, counter};
int len = ul_send_cmd_raw(cmd, sizeof(cmd), response, responseLength);
- if (len == -1)
- ul_switch_off_field();
return len;
}
-static int ulev1_readSignature( uint8_t *response, uint16_t responseLength ){
+
+static int ulev1_readTearing(uint8_t counter, uint8_t *response, uint16_t responseLength) {
+
+ uint8_t cmd[] = {MIFARE_ULEV1_CHECKTEAR, counter};
+ int len = ul_send_cmd_raw(cmd, sizeof(cmd), response, responseLength);
+ return len;
+}
+
+
+static int ulev1_readSignature(uint8_t *response, uint16_t responseLength) {
uint8_t cmd[] = {MIFARE_ULEV1_READSIG, 0x00};
int len = ul_send_cmd_raw(cmd, sizeof(cmd), response, responseLength);
- if (len == -1)
- ul_switch_off_field();
return len;
}
-static int ul_print_default( uint8_t *data){
+
+// Fudan check checks for which error is given for a command with incorrect crc
+// NXP UL chip responds with 01, fudan 00.
+// other possible checks:
+// send a0 + crc
+// UL responds with 00, fudan doesn't respond
+// or
+// send a200 + crc
+// UL doesn't respond, fudan responds with 00
+// or
+// send 300000 + crc (read with extra byte(s))
+// UL responds with read of page 0, fudan doesn't respond.
+//
+// make sure field is off before calling this function
+static int ul_fudan_check(void) {
+ iso14a_card_select_t card;
+ if (!ul_select(&card, false))
+ return UL_ERROR;
+
+ UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_RAW | ISO14A_NO_DISCONNECT, 4, 0}};
+
+ uint8_t cmd[4] = {0x30,0x00,0x02,0xa7}; //wrong crc on purpose should be 0xa8
+ memcpy(c.d.asBytes, cmd, 4);
+ clearCommandBuffer();
+ SendCommand(&c);
+ UsbCommand resp;
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return UL_ERROR;
+ if (resp.arg[0] != 1) return UL_ERROR;
+
+ return (!resp.d.asBytes[0]) ? FUDAN_UL : UL; //if response == 0x00 then Fudan, else Genuine NXP
+}
+
+
+static int ul_print_default(uint8_t *data) {
uint8_t uid[7];
+ memcpy(uid, data, 3);
+ memcpy(uid+3, data+4, 4);
- uid[0] = data[0];
- uid[1] = data[1];
- uid[2] = data[2];
- uid[3] = data[4];
- uid[4] = data[5];
- uid[5] = data[6];
- uid[6] = data[7];
-
- PrintAndLog(" UID : %s ", sprint_hex(uid, 7));
- PrintAndLog(" UID[0] : %02X, Manufacturer: %s", uid[0], getTagInfo(uid[0]) );
- if ( uid[0] == 0x05 ) {
+ PrintAndLogEx(NORMAL," UID : %s", sprint_hex(uid, 7));
+ PrintAndLogEx(NORMAL," UID[0] : %02X, %s", uid[0], getManufacturerName(uid[0]));
+
+ if (uid[0] == 0x05 && ((uid[1] & 0xf0) >> 4) == 2 ) { // is infineon and 66RxxP
uint8_t chip = (data[8] & 0xC7); // 11000111 mask, bit 3,4,5 RFU
switch (chip){
- case 0xc2: PrintAndLog(" IC type : SLE 66R04P"); break;
- case 0xc4: PrintAndLog(" IC type : SLE 66R16P"); break;
- case 0xc6: PrintAndLog(" IC type : SLE 66R32P"); break;
+ case 0xc2: PrintAndLogEx(NORMAL, " IC type : SLE 66R04P 770 Bytes"); break; //77 pages
+ case 0xc4: PrintAndLogEx(NORMAL, " IC type : SLE 66R16P 2560 Bytes"); break; //256 pages
+ case 0xc6: PrintAndLogEx(NORMAL, " IC type : SLE 66R32P 5120 Bytes"); break; //512 pages /2 sectors
}
}
- // CT (cascade tag byte) 0x88 xor SN0 xor SN1 xor SN2
- int crc0 = 0x88 ^ data[0] ^ data[1] ^data[2];
+ // CT (cascade tag byte) 0x88 xor SN0 xor SN1 xor SN2
+ int crc0 = 0x88 ^ uid[0] ^ uid[1] ^ uid[2];
if ( data[3] == crc0 )
- PrintAndLog(" BCC0 : %02X - Ok", data[3]);
+ PrintAndLogEx(NORMAL, " BCC0 : %02X, Ok", data[3]);
else
- PrintAndLog(" BCC0 : %02X - crc should be %02X", data[3], crc0);
+ PrintAndLogEx(NORMAL, " BCC0 : %02X, crc should be %02X", data[3], crc0);
- int crc1 = data[4] ^ data[5] ^ data[6] ^data[7];
+ int crc1 = uid[3] ^ uid[4] ^ uid[5] ^ uid[6];
if ( data[8] == crc1 )
- PrintAndLog(" BCC1 : %02X - Ok", data[8]);
+ PrintAndLogEx(NORMAL, " BCC1 : %02X, Ok", data[8]);
else
- PrintAndLog(" BCC1 : %02X - crc should be %02X", data[8], crc1 );
+ PrintAndLogEx(NORMAL, " BCC1 : %02X, crc should be %02X", data[8], crc1 );
+
+ PrintAndLogEx(NORMAL, " Internal : %02X, %sdefault", data[9], (data[9]==0x48)?"":"not " );
+
+ PrintAndLogEx(NORMAL, " Lock : %s (binary %s %s)",
+ sprint_hex(data+10, 2),
+ printBits(1, data+10),
+ printBits(1, data+11)
+ );
+
+ PrintAndLogEx(NORMAL, "OneTimePad : %s (binary %s %s %s %s)\n",
+ sprint_hex(data+12, 4),
+ printBits(1, data+12),
+ printBits(1, data+13),
+ printBits(1, data+14),
+ printBits(1, data+15)
+ );
- PrintAndLog(" Internal : %02X - %s default", data[9], (data[9]==0x48)?"":"not" );
- PrintAndLog(" Lock : %s - %s", sprint_hex(data+10, 2),printBits( 2, data+10) );
- PrintAndLog("OneTimePad : %s ", sprint_hex(data + 12, 4));
- PrintAndLog("");
return 0;
}
-static int ntag_print_CC(uint8_t *data) {
- PrintAndLog("\n--- NTAG NDEF Message");
-
- if(data[0] != 0xe1) {
- PrintAndLog("no NDEF message");
- return -1; // no NDEF message
- }
+static int ndef_print_CC(uint8_t *data) {
+ // no NDEF message
+ if(data[0] != 0xe1)
+ return -1;
- PrintAndLog("Capability Container: %s", sprint_hex(data,4) );
- PrintAndLog(" %02X: NDEF Magic Number", data[0]);
- PrintAndLog(" %02X: version %d.%d supported by tag", data[1], (data[1] & 0xF0) >> 4, data[1] & 0x0f);
- PrintAndLog(" %02X: Physical Memory Size: %d bytes", data[2], (data[2] + 1) * 8);
+ PrintAndLogEx(NORMAL, "--- NDEF Message");
+ PrintAndLogEx(NORMAL, "Capability Container: %s", sprint_hex(data,4) );
+ PrintAndLogEx(NORMAL, " %02X : NDEF Magic Number", data[0]);
+ PrintAndLogEx(NORMAL, " %02X : version %d.%d supported by tag", data[1], (data[1] & 0xF0) >> 4, data[1] & 0x0f);
+ PrintAndLogEx(NORMAL, " %02X : Physical Memory Size: %d bytes", data[2], (data[2] + 1) * 8);
if ( data[2] == 0x12 )
- PrintAndLog(" %02X: NDEF Memory Size: %d bytes", data[2], 144);
+ PrintAndLogEx(NORMAL, " %02X : NDEF Memory Size: %d bytes", data[2], 144);
else if ( data[2] == 0x3e )
- PrintAndLog(" %02X: NDEF Memory Size: %d bytes", data[2], 496);
+ PrintAndLogEx(NORMAL, " %02X : NDEF Memory Size: %d bytes", data[2], 496);
else if ( data[2] == 0x6d )
- PrintAndLog(" %02X: NDEF Memory Size: %d bytes", data[2], 872);
-
- PrintAndLog(" %02X: %s / %s", data[3],
- (data[3] & 0xF0) ? "(RFU)" : "Read access granted without any security",
+ PrintAndLogEx(NORMAL, " %02X : NDEF Memory Size: %d bytes", data[2], 872);
+
+ PrintAndLogEx(NORMAL, " %02X : %s / %s", data[3],
+ (data[3] & 0xF0) ? "(RFU)" : "Read access granted without any security",
(data[3] & 0x0F)==0 ? "Write access granted without any security" : (data[3] & 0x0F)==0x0F ? "No write access granted at all" : "(RFU)");
return 0;
}
-static int ul_print_type(uint16_t tagtype){
- if ( tagtype & UL )
- PrintAndLog(" TYPE : MIFARE Ultralight (MF0ICU1) %s [%x]", (tagtype & MAGIC)?"<magic>":"", tagtype);
- else if ( tagtype & UL_C)
- PrintAndLog(" TYPE : MIFARE Ultralight C (MF0ULC) %s [%x]", (tagtype & MAGIC)?"<magic>":"", tagtype );
- else if ( tagtype & UL_EV1_48)
- PrintAndLog(" TYPE : MIFARE Ultralight EV1 48bytes (MF0UL1101)");
- else if ( tagtype & UL_EV1_128)
- PrintAndLog(" TYPE : MIFARE Ultralight EV1 128bytes (MF0UL2101)");
- else if ( tagtype & NTAG_213 )
- PrintAndLog(" TYPE : MIFARE NTAG 213 144bytes (NT2H1311G0DU)");
- else if ( tagtype & NTAG_215 )
- PrintAndLog(" TYPE : MIFARE NTAG 215 504bytes (NT2H1511G0DU)");
- else if ( tagtype & NTAG_216 )
- PrintAndLog(" TYPE : MIFARE NTAG 216 888bytes (NT2H1611G0DU)");
- else if ( tagtype & MY_D )
- PrintAndLog(" TYPE : INFINEON my-d\x99");
- else if ( tagtype & MY_D_NFC )
- PrintAndLog(" TYPE : INFINEON my-d\x99 NFC");
- else if ( tagtype & MY_D_MOVE )
- PrintAndLog(" TYPE : INFINEON my-d\x99 move");
- else if ( tagtype & MY_D_MOVE_NFC )
- PrintAndLog(" TYPE : INFINEON my-d\x99 move NFC");
+
+int ul_print_type(uint32_t tagtype, uint8_t spaces){
+ char spc[11] = " ";
+ spc[10]=0x00;
+ char *spacer = spc + (10-spaces);
+
+ if (tagtype & UL )
+ PrintAndLogEx(NORMAL, "%sTYPE : MIFARE Ultralight (MF0ICU1) %s", spacer, (tagtype & MAGIC) ? "<magic>" : "" );
+ else if (tagtype & UL_C)
+ PrintAndLogEx(NORMAL, "%sTYPE : MIFARE Ultralight C (MF0ULC) %s", spacer, (tagtype & MAGIC) ? "<magic>" : "" );
+ else if (tagtype & UL_EV1_48)
+ PrintAndLogEx(NORMAL, "%sTYPE : MIFARE Ultralight EV1 48bytes (MF0UL1101)", spacer);
+ else if (tagtype & UL_EV1_128)
+ PrintAndLogEx(NORMAL, "%sTYPE : MIFARE Ultralight EV1 128bytes (MF0UL2101)", spacer);
+ else if (tagtype & NTAG)
+ PrintAndLogEx(NORMAL, "%sTYPE : NTAG UNKNOWN", spacer);
+ else if (tagtype & NTAG_203)
+ PrintAndLogEx(NORMAL, "%sTYPE : NTAG 203 144bytes (NT2H0301F0DT)", spacer);
+ else if (tagtype & NTAG_210)
+ PrintAndLogEx(NORMAL, "%sTYPE : NTAG 210 48bytes (NT2L1011G0DU)", spacer);
+ else if (tagtype & NTAG_212)
+ PrintAndLogEx(NORMAL, "%sTYPE : NTAG 212 128bytes (NT2L1211G0DU)", spacer);
+ else if (tagtype & NTAG_213)
+ PrintAndLogEx(NORMAL, "%sTYPE : NTAG 213 144bytes (NT2H1311G0DU)", spacer);
+ else if (tagtype & NTAG_215)
+ PrintAndLogEx(NORMAL, "%sTYPE : NTAG 215 504bytes (NT2H1511G0DU)", spacer);
+ else if (tagtype & NTAG_216)
+ PrintAndLogEx(NORMAL, "%sTYPE : NTAG 216 888bytes (NT2H1611G0DU)", spacer);
+ else if (tagtype & NTAG_I2C_1K)
+ PrintAndLogEx(NORMAL, "%sTYPE : NTAG I%sC 888bytes (NT3H1101FHK)", spacer, "\xFD");
+ else if (tagtype & NTAG_I2C_2K)
+ PrintAndLogEx(NORMAL, "%sTYPE : NTAG I%sC 1904bytes (NT3H1201FHK)", spacer, "\xFD");
+ else if (tagtype & MY_D)
+ PrintAndLogEx(NORMAL, "%sTYPE : INFINEON my-d\x99 (SLE 66RxxS)", spacer);
+ else if (tagtype & MY_D_NFC)
+ PrintAndLogEx(NORMAL, "%sTYPE : INFINEON my-d\x99 NFC (SLE 66RxxP)", spacer);
+ else if (tagtype & MY_D_MOVE)
+ PrintAndLogEx(NORMAL, "%sTYPE : INFINEON my-d\x99 move | my-d\x99move NFC (SLE 66R01P)", spacer);
+ else if (tagtype & MY_D_MOVE_LEAN)
+ PrintAndLogEx(NORMAL, "%sTYPE : INFINEON my-d\x99 move lean (SLE 66R01L)", spacer);
+ else if (tagtype & FUDAN_UL)
+ PrintAndLogEx(NORMAL, "%sTYPE : FUDAN Ultralight Compatible (or other compatible) %s", spacer, (tagtype & MAGIC) ? "<magic>" : "" );
else
- PrintAndLog(" TYPE : Unknown %04x",tagtype);
+ PrintAndLogEx(NORMAL, "%sTYPE : Unknown %06x", spacer, tagtype);
return 0;
}
-static int ulc_print_3deskey( uint8_t *data){
- PrintAndLog(" deskey1 [44/0x2C]: %s [%.4s]", sprint_hex(data ,4),data);
- PrintAndLog(" deskey1 [45/0x2D]: %s [%.4s]", sprint_hex(data+4 ,4),data+4);
- PrintAndLog(" deskey2 [46/0x2E]: %s [%.4s]", sprint_hex(data+8 ,4),data+8);
- PrintAndLog(" deskey2 [47/0x2F]: %s [%.4s]", sprint_hex(data+12,4),data+12);
- PrintAndLog(" 3des key : %s", sprint_hex(SwapEndian64(data, 16), 16));
+
+static int ulc_print_3deskey(uint8_t *data) {
+ PrintAndLogEx(NORMAL, " deskey1 [44/0x2C] : %s [%.4s]", sprint_hex(data ,4),data);
+ PrintAndLogEx(NORMAL, " deskey1 [45/0x2D] : %s [%.4s]", sprint_hex(data+4 ,4),data+4);
+ PrintAndLogEx(NORMAL, " deskey2 [46/0x2E] : %s [%.4s]", sprint_hex(data+8 ,4),data+8);
+ PrintAndLogEx(NORMAL, " deskey2 [47/0x2F] : %s [%.4s]", sprint_hex(data+12,4),data+12);
+ PrintAndLogEx(NORMAL, "\n 3des key : %s", sprint_hex(SwapEndian64(data, 16, 8), 16));
return 0;
}
-static int ulc_print_configuration( uint8_t *data){
- PrintAndLog("--- UL-C Configuration");
- PrintAndLog(" Higher Lockbits [40/0x28]: %s - %s", sprint_hex(data, 4), printBits(2, data));
- PrintAndLog(" Counter [41/0x29]: %s - %s", sprint_hex(data+4, 4), printBits(2, data+4));
+static int ulc_print_configuration(uint8_t *data) {
+
+ PrintAndLogEx(NORMAL, "--- UL-C Configuration");
+ PrintAndLogEx(NORMAL, " Higher Lockbits [40/0x28] : %s (binary %s %s)",
+ sprint_hex(data, 2),
+ printBits(1, data),
+ printBits(1, data+1)
+ );
+ PrintAndLogEx(NORMAL, " Counter [41/0x29] : %s", sprint_hex(data+4, 2));
bool validAuth = (data[8] >= 0x03 && data[8] <= 0x30);
- if ( validAuth )
- PrintAndLog(" Auth0 [42/0x2A]: %s Pages above %d needs authentication", sprint_hex(data+8, 4), data[8] );
+ if (validAuth)
+ PrintAndLogEx(NORMAL, " Auth0 [42/0x2A] : %s page %d/0x%02X and above need authentication", sprint_hex(data+8, 4), data[8], data[8] );
else{
- if ( data[8] == 0){
- PrintAndLog(" Auth0 [42/0x2A]: %s default", sprint_hex(data+8, 4) );
+ if (data[8] == 0) {
+ PrintAndLogEx(NORMAL, " Auth0 [42/0x2A] : %s default", sprint_hex(data+8, 4) );
} else {
- PrintAndLog(" Auth0 [42/0x2A]: %s auth byte is out-of-range", sprint_hex(data+8, 4) );
+ PrintAndLogEx(NORMAL, " Auth0 [42/0x2A] : %s auth byte is out-of-range", sprint_hex(data+8, 4) );
}
}
- PrintAndLog(" Auth1 [43/0x2B]: %s %s",
+ PrintAndLogEx(NORMAL, " Auth1 [43/0x2B] : %s %s",
sprint_hex(data+12, 4),
(data[12] & 1) ? "write access restricted": "read and write access restricted"
);
return 0;
}
-static int ulev1_print_configuration( uint8_t *data){
- PrintAndLog("\n--- UL-EV1 Configuration");
+static int ulev1_print_configuration(uint8_t *data, uint8_t startPage) {
+
+ PrintAndLogEx(NORMAL, "\n--- Tag Configuration");
bool strg_mod_en = (data[0] & 2);
uint8_t authlim = (data[4] & 0x07);
bool prot = (data[4] & 0x80);
uint8_t vctid = data[5];
- PrintAndLog(" cfg0 [16/0x10]: %s", sprint_hex(data, 4));
- if ( data[3] < 0xff )
- PrintAndLog(" - pages above %d needs authentication",data[3]);
- else
- PrintAndLog(" - pages don't need authentication");
- PrintAndLog(" - strong modulation mode %s", (strg_mod_en) ? "enabled":"disabled");
- PrintAndLog(" cfg1 [17/0x11]: %s", sprint_hex(data+4, 4) );
- if ( authlim == 0)
- PrintAndLog(" - Unlimited password attempts");
+ PrintAndLogEx(NORMAL, " cfg0 [%u/0x%02X] : %s", startPage, startPage, sprint_hex(data, 4));
+ if (data[3] < 0xff)
+ PrintAndLogEx(NORMAL, " - page %d and above need authentication", data[3]);
+ else
+ PrintAndLogEx(NORMAL, " - pages don't need authentication");
+ PrintAndLogEx(NORMAL, " - strong modulation mode %s", (strg_mod_en) ? "enabled" : "disabled");
+ PrintAndLogEx(NORMAL, " cfg1 [%u/0x%02X] : %s", startPage + 1, startPage + 1, sprint_hex(data+4, 4) );
+ if (authlim == 0)
+ PrintAndLogEx(NORMAL, " - Unlimited password attempts");
else
- PrintAndLog(" - Max number of password attempts is %d", authlim);
- PrintAndLog(" - user configuration %s", cfglck ? "permanently locked":"writeable");
- PrintAndLog(" - %s access is protected with password", prot ? "read and write":"write");
- PrintAndLog(" %02X - Virtual Card Type Identifier is %s default", vctid, (vctid==0x05)? "":"not");
- PrintAndLog(" PWD [18/0x12]: %s", sprint_hex(data+8, 4));
- PrintAndLog(" PACK [19/0x13]: %s", sprint_hex(data+12, 4));
+ PrintAndLogEx(NORMAL, " - Max number of password attempts is %d", authlim);
+ PrintAndLogEx(NORMAL, " - user configuration %s", cfglck ? "permanently locked":"writeable");
+ PrintAndLogEx(NORMAL, " - %s access is protected with password", prot ? "read and write":"write");
+ PrintAndLogEx(NORMAL, " - %02X, Virtual Card Type Identifier is %s default", vctid, (vctid==0x05)? "":"not");
+ PrintAndLogEx(NORMAL, " PWD [%u/0x%02X] : %s- (cannot be read)", startPage + 2, startPage + 2, sprint_hex(data+8, 4));
+ PrintAndLogEx(NORMAL, " PACK [%u/0x%02X] : %s - (cannot be read)", startPage + 3, startPage + 3, sprint_hex(data+12, 2));
+ PrintAndLogEx(NORMAL, " RFU [%u/0x%02X] : %s- (cannot be read)", startPage + 3, startPage + 3, sprint_hex(data+14, 2));
return 0;
}
-static int ulev1_print_counters(){
- PrintAndLog("--- UL-EV1 Counters");
+
+static int ulev1_print_counters(void) {
+ PrintAndLogEx(NORMAL, "--- Tag Counters");
+ uint8_t tear[1] = {0};
uint8_t counter[3] = {0,0,0};
+ uint16_t len = 0;
for ( uint8_t i = 0; i<3; ++i) {
- ulev1_readCounter(i,counter, sizeof(counter) );
- PrintAndLog(" [%0d] : %s", i, sprint_hex(counter,3));
+ ulev1_readTearing(i, tear, sizeof(tear));
+ len = ulev1_readCounter(i, counter, sizeof(counter) );
+ if (len == 3) {
+ PrintAndLogEx(NORMAL, " [%0d] : %s", i, sprint_hex(counter,3));
+ PrintAndLogEx(NORMAL, " - %02X tearing %s", tear[0], ( tear[0]==0xBD)?"Ok":"failure");
+ }
}
- return 0;
+ return len;
}
+
static int ulev1_print_signature( uint8_t *data, uint8_t len){
- PrintAndLog("\n--- UL-EV1 Signature");
- PrintAndLog("IC signature public key name : NXP NTAG21x 2013");
- PrintAndLog("IC signature public key value : 04494e1a386d3d3cfe3dc10e5de68a499b1c202db5b132393e89ed19fe5be8bc61");
- PrintAndLog(" Elliptic curve parameters : secp128r1");
- PrintAndLog(" Tag ECC Signature : %s", sprint_hex(data, len));
+ PrintAndLogEx(NORMAL, "\n--- Tag Signature");
+ PrintAndLogEx(NORMAL, "IC signature public key name : NXP NTAG21x (2013)");
+ PrintAndLogEx(NORMAL, "IC signature public key value : %s", sprint_hex(public_ecda_key, PUBLIC_ECDA_KEYLEN));
+ PrintAndLogEx(NORMAL, " Elliptic curve parameters : secp128r1");
+ PrintAndLogEx(NORMAL, " Tag ECC Signature : %s", sprint_hex(data, len));
//to do: verify if signature is valid
- //PrintAndLog("IC signature status: %s valid", (iseccvalid() )?"":"not");
+ //PrintAndLogEx(NORMAL, "IC signature status: %s valid", (iseccvalid() )?"":"not");
return 0;
}
+
static int ulev1_print_version(uint8_t *data){
- PrintAndLog("\n--- UL-EV1 / NTAG Version");
- PrintAndLog(" Raw bytes : %s", sprint_hex(data, 8) );
- PrintAndLog(" Vendor ID : %02X, Manufacturer: %s", data[1], getTagInfo(data[1]));
- PrintAndLog(" Product type : %s", getProductTypeStr(data[2]));
- PrintAndLog(" Product subtype : %02X %s", data[3], (data[3]==1) ?"17 pF":"50pF");
- PrintAndLog(" Major version : %02X", data[4]);
- PrintAndLog(" Minor version : %02X", data[5]);
- PrintAndLog(" Size : %s", getUlev1CardSizeStr(data[6]));
- PrintAndLog(" Protocol type : %02X", data[7]);
+ PrintAndLogEx(NORMAL, "\n--- Tag Version");
+ PrintAndLogEx(NORMAL, " Raw bytes : %s", sprint_hex(data, 8) );
+ PrintAndLogEx(NORMAL, " Vendor ID : %02X, %s", data[1], getManufacturerName(data[1]));
+ PrintAndLogEx(NORMAL, " Product type : %s", getProductTypeStr(data[2]));
+ PrintAndLogEx(NORMAL, " Product subtype : %02X, %s", data[3], (data[3]==1) ?"17 pF":"50pF");
+ PrintAndLogEx(NORMAL, " Major version : %02X", data[4]);
+ PrintAndLogEx(NORMAL, " Minor version : %02X", data[5]);
+ PrintAndLogEx(NORMAL, " Size : %s", getUlev1CardSizeStr(data[6]));
+ PrintAndLogEx(NORMAL, " Protocol type : %02X", data[7]);
return 0;
}
-/*
-static int ulc_magic_test(){
- // Magic Ultralight test
- // Magic UL-C, by observation,
- // 1) it seems to have a static nonce response to 0x1A command.
- // 2) the deskey bytes is not-zero:d out on as datasheet states.
- // 3) UID - changeable, not only, but pages 0-1-2-3.
- // 4) use the ul_magic_test ! magic tags answers specially!
- int returnValue = UL_ERROR;
- iso14a_card_select_t card;
- uint8_t nonce1[11] = {0x00};
- uint8_t nonce2[11] = {0x00};
- int status = ul_select(&card);
- if ( status < 1 ){
- PrintAndLog("Error: couldn't select ulc_magic_test");
- ul_switch_off_field();
- return UL_ERROR;
- }
- status = ulc_requestAuthentication(0, nonce1, sizeof(nonce1));
- if ( status > 0 ) {
- status = ulc_requestAuthentication(0, nonce2, sizeof(nonce2));
- returnValue = ( !memcmp(nonce1, nonce2, 11) ) ? UL_C_MAGIC : UL_C;
- } else {
- returnValue = UL;
- }
- ul_switch_off_field();
- return returnValue;
-}
-*/
-static int ul_magic_test(){
- // Magic Ultralight tests
- // 1) take present UID, and try to write it back. OBSOLETE
- // 2) make a wrong length write to page0, and see if tag answers with ACK/NACK:
+static int ul_magic_test(void) {
+ // try a compatibility write to page0, and see if tag answers with ACK/NACK to the first part of the command
iso14a_card_select_t card;
- int status = ul_select(&card);
- if ( status < 1 ){
- PrintAndLog("Error: couldn't select ul_magic_test");
- ul_switch_off_field();
+ if (!ul_select(&card, false))
return UL_ERROR;
+ int status = ul_comp_write_ex(0, NULL, 0, true);
+ if (status == 0) {
+ return MAGIC;
}
- status = ul_comp_write(0, NULL, 0);
- ul_switch_off_field();
- if ( status == 0)
- return UL_MAGIC;
- return UL;
+ return 0;
}
-uint16_t GetHF14AMfU_Type(void){
+
+uint32_t GetHF14AMfU_Type(void){
TagTypeUL_t tagtype = UNKNOWN;
iso14a_card_select_t card;
uint8_t version[10] = {0x00};
- int status = 0;
int len;
- status = ul_select(&card);
- if ( status < 1 ){
- PrintAndLog("Error: couldn't select");
- ul_switch_off_field();
+ if (!ul_select(&card, true)) {
+ DropField();
+ msleep(200);
return UL_ERROR;
}
- // Ultralight - ATQA / SAK
- if ( card.atqa[1] != 0x00 || card.atqa[0] != 0x44 || card.sak != 0x00 ) {
- PrintAndLog("Tag is not Ultralight | NTAG | MY-D [ATQA: %02X %02X SAK: %02X]\n", card.atqa[1], card.atqa[0], card.sak);
- ul_switch_off_field();
+
+ // Check for Ultralight Family
+ if (card.uidlen != 7 || (card.sak & 0x38) != 0x00) {
+ DropField();
+ PrintAndLogEx(NORMAL, "Tag is not Ultralight | NTAG | MY-D [ATQA: %02X %02X SAK: %02X]\n", card.atqa[1], card.atqa[0], card.sak);
return UL_ERROR;
}
- if ( card.uid[0] != 0x05) {
-
+ if (card.uid[0] != 0x05) {
len = ulev1_getVersion(version, sizeof(version));
- if (len > -1) ul_switch_off_field(); //if -1 it is already off
-
- switch (len) {
- case 0x0A: {
-
- if ( version[2] == 0x03 && version[6] == 0x0B )
- tagtype = UL_EV1_48;
- else if ( version[2] == 0x03 && version[6] != 0x0B )
- tagtype = UL_EV1_128;
- else if ( version[2] == 0x04 && version[6] == 0x0F )
- tagtype = NTAG_213;
- else if ( version[2] == 0x04 && version[6] == 0x11 )
- tagtype = NTAG_215;
- else if ( version[2] == 0x04 && version[6] == 0x13 )
- tagtype = NTAG_216;
- else if ( version[2] == 0x04 )
- tagtype = NTAG;
-
- break;
- }
- case 0x01: tagtype = UL_C; break;
- case 0x00: tagtype = UL; break;
- case -1 : tagtype = (UL | UL_C); break; //when does this happen?
- default : tagtype = UNKNOWN; break;
+ if (len == 10) {
+ if (version[2] == 0x03 && version[6] == 0x0B)
+ tagtype = UL_EV1_48;
+ else if (version[2] == 0x03 && version[6] != 0x0B)
+ tagtype = UL_EV1_128;
+ else if (version[2] == 0x04 && version[3] == 0x01 && version[6] == 0x0B)
+ tagtype = NTAG_210;
+ else if (version[2] == 0x04 && version[3] == 0x01 && version[6] == 0x0E)
+ tagtype = NTAG_212;
+ else if (version[2] == 0x04 && version[3] == 0x02 && version[6] == 0x0F)
+ tagtype = NTAG_213;
+ else if (version[2] == 0x04 && version[3] == 0x02 && version[6] == 0x11)
+ tagtype = NTAG_215;
+ else if (version[2] == 0x04 && version[3] == 0x02 && version[6] == 0x13)
+ tagtype = NTAG_216;
+ else if (version[2] == 0x04 && version[3] == 0x05 && version[6] == 0x13)
+ tagtype = NTAG_I2C_1K;
+ else if (version[2] == 0x04 && version[3] == 0x05 && version[6] == 0x15)
+ tagtype = NTAG_I2C_2K;
+ else if (version[2] == 0x04)
+ tagtype = NTAG;
}
- if (tagtype == (UL | UL_C)) {
- status = ul_select(&card);
- if ( status < 1 ){
- PrintAndLog("Error: couldn't select 2");
- ul_switch_off_field();
+
+ // UL vs UL-C vs ntag203 test
+ if (tagtype == UNKNOWN) {
+ ul_halt();
+ if (!ul_select(&card, false)) {
+ DropField();
+ msleep(200);
return UL_ERROR;
}
- uint8_t nonce1[11] = {0x00};
- status = ulc_requestAuthentication(0, nonce1, sizeof(nonce1));
- if ( status > 0 )
+
+ // do UL_C check first...
+ uint8_t nonce[11] = {0x00};
+ len = ulc_requestAuthentication(nonce, sizeof(nonce));
+ ul_halt();
+ if (len == 11) {
tagtype = UL_C;
- else
- tagtype = UL;
+ } else {
+ // need to re-select after authentication error
+ if (!ul_select(&card, false)) {
+ DropField();
+ msleep(200);
+ return UL_ERROR;
+ }
- if (status != -1) ul_switch_off_field();
+ uint8_t data[16] = {0x00};
+ // read page 0x29 (last valid ntag203 page)
+ len = ul_read(0x29, data, sizeof(data));
+ if (len <= 1) {
+ tagtype = UL;
+ } else {
+ // read page 0x30 (should error if it is a ntag203)
+ len = ul_read(0x30, data, sizeof(data));
+ if (len <= 1) {
+ ul_halt();
+ tagtype = NTAG_203;
+ }
+ }
+ }
}
- } else {
- // Infinition MY-D tests Exam high nibble
+ if (tagtype & UL) {
+ tagtype = ul_fudan_check();
+ ul_halt();
+ }
+
+ } else { // manufacturer Infineon. Check for my-d variants
+
uint8_t nib = (card.uid[1] & 0xf0) >> 4;
- switch ( nib ){
- case 1: tagtype = MY_D; break;
- case 2: tagtype = (MY_D | MY_D_NFC); break;
- case 3: tagtype = (MY_D_MOVE | MY_D_MOVE_NFC); break;
+ switch (nib) {
+ case 1: tagtype = MY_D; break; //or SLE 66RxxS ... up to 512 pages of 8 user bytes...
+ case 2: tagtype = MY_D_NFC; break; //or SLE 66RxxP ... up to 512 pages of 8 user bytes... (or in nfc mode FF pages of 4 bytes)
+ case 3: tagtype = MY_D_MOVE; break; //or SLE 66R01P // 38 pages of 4 bytes
+ case 7: tagtype = MY_D_MOVE_LEAN; break; //or SLE 66R01L // 16 pages of 4 bytes
}
}
- tagtype = (ul_magic_test() == UL_MAGIC) ? (tagtype | MAGIC) : tagtype;
- //if ((tagtype & UL)) tagtype = ul_magic_test();
+ tagtype |= ul_magic_test();
+
+ if (tagtype == (UNKNOWN | MAGIC)) tagtype = (UL_MAGIC);
+ DropField();
+ msleep(200);
+
+ printf("Tagtype: %08x\n", tagtype);
return tagtype;
}
-int CmdHF14AMfUInfo(const char *Cmd){
+
+static int usage_hf_mfu_info(void) {
+ PrintAndLogEx(NORMAL, "It gathers information about the tag and tries to detect what kind it is.");
+ PrintAndLogEx(NORMAL, "Sometimes the tags are locked down, and you may need a key to be able to read the information");
+ PrintAndLogEx(NORMAL, "The following tags can be identified:\n");
+ PrintAndLogEx(NORMAL, "Ultralight, Ultralight-C, Ultralight EV1, NTAG 203, NTAG 210,");
+ PrintAndLogEx(NORMAL, "NTAG 212, NTAG 213, NTAG 215, NTAG 216, NTAG I2C 1K & 2K");
+ PrintAndLogEx(NORMAL, "my-d, my-d NFC, my-d move, my-d move NFC\n");
+ PrintAndLogEx(NORMAL, "Usage: hf mfu info k <key> l");
+ PrintAndLogEx(NORMAL, " Options : ");
+ PrintAndLogEx(NORMAL, " k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
+ PrintAndLogEx(NORMAL, " l : (optional) swap entered key's endianness");
+ PrintAndLogEx(NORMAL, "");
+ PrintAndLogEx(NORMAL, " sample : hf mfu info");
+ PrintAndLogEx(NORMAL, " : hf mfu info k 00112233445566778899AABBCCDDEEFF");
+ PrintAndLogEx(NORMAL, " : hf mfu info k AABBCCDDD");
+ return 0;
+}
+
+
+static int CmdHF14AMfUInfo(const char *Cmd) {
uint8_t authlim = 0xff;
- uint8_t data[16] = {0x00};
iso14a_card_select_t card;
- uint8_t *key;
- int status;
+ bool errors = false;
+ uint8_t keybytes[16] = {0x00};
+ uint8_t *authenticationkey = keybytes;
+ int keyLen = 0;
+ bool hasAuthKey = false;
+ bool locked = false;
+ bool swapEndian = false;
+ uint8_t cmdp = 0;
+ uint8_t pack[4] = {0,0,0,0};
+ int len = 0;
- TagTypeUL_t tagtype = GetHF14AMfU_Type();
- if (tagtype == UL_ERROR) return -1;
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ case 'H':
+ return usage_hf_mfu_info();
+ case 'k':
+ case 'K':
+ keyLen = 32;
+ errors = param_gethex_ex(Cmd, cmdp+1, authenticationkey, &keyLen);
+ if (errors || (keyLen != 32 && keyLen != 8)) { //ul-c or ev1/ntag key length
+ PrintAndLogEx(ERR, "Key has incorrect length.\n");
+ errors = true;
+ }
+ cmdp += 2;
+ keyLen /= 2;
+ hasAuthKey = true;
+ break;
+ case 'l':
+ case 'L':
+ swapEndian = true;
+ cmdp++;
+ break;
+ default:
+ PrintAndLogEx(WARNING, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ if(errors) break;
+ }
- PrintAndLog("\n--- Tag Information ---------");
- PrintAndLog("-------------------------------------------------------------");
- ul_print_type(tagtype);
+ //Validations
+ if (errors)
+ return usage_hf_mfu_info();
- status = ul_select(&card);
- if ( status < 1 ){
- PrintAndLog("Error: couldn't select");
- ul_switch_off_field();
- return status;
+ TagTypeUL_t tagtype = GetHF14AMfU_Type();
+ if (tagtype == UL_ERROR) {
+ return -1;
}
- // read pages 0,1,2,4 (should read 4pages)
- status = ul_read(0, data, sizeof(data));
- if ( status == -1 ){
- PrintAndLog("Error: tag didn't answer to READ");
- return status;
+ PrintAndLogEx(NORMAL, "\n--- Tag Information ---------");
+ PrintAndLogEx(NORMAL, "-------------------------------------------------------------");
+ ul_print_type(tagtype, 6);
+
+ // Swap endianness
+ if (swapEndian && hasAuthKey)
+ authenticationkey = SwapEndian64(authenticationkey, keyLen, (keyLen == 16) ? 8 : 4 );
+
+ if (!ul_auth_select(&card, tagtype, hasAuthKey, authenticationkey, pack, sizeof(pack))) {
+ DropField();
+ return -1;
}
- ul_print_default(data);
+ // read pages 0,1,2,3 (should read 4pages)
+ uint8_t data[16];
+ len = ul_read(0, data, sizeof(data));
+ if (len == -1) {
+ DropField();
+ PrintAndLogEx(WARNING, "Error: tag didn't answer to READ");
+ return -1;
+ } else if (len == 16) {
+ ul_print_default(data);
+ ndef_print_CC(data+12);
+ } else {
+ locked = true;
+ }
- if ((tagtype & UL_C)){
+ // UL_C Specific
+ if ((tagtype & UL_C)) {
// read pages 0x28, 0x29, 0x2A, 0x2B
uint8_t ulc_conf[16] = {0x00};
- status = ul_read(0x28, ulc_conf, sizeof(ulc_conf));
- if ( status == -1 ){
- PrintAndLog("Error: tag didn't answer to READ - possibly locked");
- return status;
- }
- ulc_print_configuration(ulc_conf);
-
- if ((tagtype & MAGIC)){
+ len = ul_read(0x28, ulc_conf, sizeof(ulc_conf));
+ if (len == -1) {
+ DropField();
+ PrintAndLogEx(WARNING, "Error: tag didn't answer to READ UL-C");
+ return -1;
+ }
+ if (len == 16) {
+ ulc_print_configuration(ulc_conf);
+ } else {
+ locked = true;
+ }
+ if ((tagtype & MAGIC)) {
+ //just read key
uint8_t ulc_deskey[16] = {0x00};
- status = ul_read(0x2C, ulc_deskey, sizeof(ulc_deskey));
- if ( status == -1 ){
- PrintAndLog("Error: tag didn't answer to READ magic");
- return status;
+ len = ul_read(0x2C, ulc_deskey, sizeof(ulc_deskey));
+ if (len == -1) {
+ DropField();
+ PrintAndLogEx(WARNING, "Error: tag didn't answer to READ magic");
+ return -1;
}
- ulc_print_3deskey(ulc_deskey);
-
+ if (len == 16) ulc_print_3deskey(ulc_deskey);
} else {
- PrintAndLog("Trying some default 3des keys");
- ul_switch_off_field();
- for (uint8_t i = 0; i < 7; ++i ){
- key = default_3des_keys[i];
- if (try3DesAuthentication(key) == 1){
- PrintAndLog("Found default 3des key: "); //%s", sprint_hex(key,16));
- ulc_print_3deskey(SwapEndian64(key,16));
- return 0;
+ // if we called info with key, just return
+ if (hasAuthKey) {
+ DropField();
+ return 1;
+ }
+
+ // also try to diversify default keys.. look into CmdHF14AMfuGenDiverseKeys
+ PrintAndLogEx(INFO, "Trying some default 3des keys");
+ for (uint8_t i = 0; i < KEYS_3DES_COUNT; ++i ) {
+ uint8_t *key = default_3des_keys[i];
+ if (ulc_authentication(key, true)) {
+ DropField();
+ PrintAndLogEx(SUCCESS, "Found default 3des key: ");
+ uint8_t keySwap[16];
+ memcpy(keySwap, SwapEndian64(key,16,8), 16);
+ ulc_print_3deskey(keySwap);
+ return 1;
}
}
+ DropField();
+ return 1;
}
}
+ // do counters and signature first (don't neet auth)
+
+ // ul counters are different than ntag counters
if ((tagtype & (UL_EV1_48 | UL_EV1_128))) {
- //do counters and signature first (don't neet auth)
- ulev1_print_counters();
+ if (ulev1_print_counters() != 3) {
+ // failed - re-select
+ if (!ul_auth_select( &card, tagtype, hasAuthKey, authenticationkey, pack, sizeof(pack))) {
+ DropField();
+ return -1;
+ }
+ }
+ }
+ if ((tagtype & (UL_EV1_48 | UL_EV1_128 | NTAG_213 | NTAG_215 | NTAG_216 | NTAG_I2C_1K | NTAG_I2C_2K ))) {
uint8_t ulev1_signature[32] = {0x00};
- status = ulev1_readSignature( ulev1_signature, sizeof(ulev1_signature));
- if ( status == -1 ){
- PrintAndLog("Error: tag didn't answer to READ SIGNATURE");
- return status;
- }
- ulev1_print_signature( ulev1_signature, sizeof(ulev1_signature));
-
- uint8_t startconfigblock = (tagtype & UL_EV1_48) ? 0x10 : 0x25;
- uint8_t ulev1_conf[16] = {0x00};
- status = ul_read(startconfigblock, ulev1_conf, sizeof(ulev1_conf));
- if ( status == -1 ){
- PrintAndLog("Error: tag didn't answer to READ EV1");
- return status;
+ len = ulev1_readSignature(ulev1_signature, sizeof(ulev1_signature));
+ if (len == -1) {
+ DropField();
+ PrintAndLogEx(WARNING, "Error: tag didn't answer to READ SIGNATURE");
+ return -1;
+ }
+ if (len == 32) {
+ ulev1_print_signature( ulev1_signature, sizeof(ulev1_signature));
+ } else {
+ // re-select
+ if (!ul_auth_select( &card, tagtype, hasAuthKey, authenticationkey, pack, sizeof(pack))) {
+ DropField();
+ return -1;
+ }
}
- // save AUTHENTICATION LIMITS for later:
- authlim = (ulev1_conf[4] & 0x07);
- ulev1_print_configuration(ulev1_conf);
}
- if ((tagtype & (UL_EV1_48 | UL_EV1_128 | NTAG_213 | NTAG_215 | NTAG_216))) {
-
+ if ((tagtype & (UL_EV1_48 | UL_EV1_128 | NTAG_210 | NTAG_212 | NTAG_213 | NTAG_215 | NTAG_216 | NTAG_I2C_1K | NTAG_I2C_2K))) {
uint8_t version[10] = {0x00};
- status = ulev1_getVersion(version, sizeof(version));
- if ( status == -1 ){
- PrintAndLog("Error: tag didn't answer to GETVERSION");
- return status;
+ len = ulev1_getVersion(version, sizeof(version));
+ if (len == -1) {
+ DropField();
+ PrintAndLogEx(WARNING, "Error: tag didn't answer to GETVERSION");
+ return -1;
+ } else if (len == 10) {
+ ulev1_print_version(version);
+ } else {
+ locked = true;
+ if (!ul_auth_select( &card, tagtype, hasAuthKey, authenticationkey, pack, sizeof(pack))) {
+ DropField();
+ return -1;
+ }
+ }
+
+ uint8_t startconfigblock = 0;
+ uint8_t ulev1_conf[16] = {0x00};
+ // config blocks always are last 4 pages
+ for (uint8_t idx = 0; idx < MAX_UL_TYPES; idx++) {
+ if (tagtype & UL_TYPES_ARRAY[idx]) {
+ startconfigblock = UL_MEMORY_ARRAY[idx]-3;
+ break;
+ }
+ }
+
+ if (startconfigblock) { // if we know where the config block is...
+ len = ul_read(startconfigblock, ulev1_conf, sizeof(ulev1_conf));
+ if (len == -1) {
+ DropField();
+ PrintAndLogEx(WARNING, "Error: tag didn't answer to READ EV1");
+ return -1;
+ } else if (len == 16) {
+ // save AUTHENTICATION LIMITS for later:
+ authlim = (ulev1_conf[4] & 0x07);
+ ulev1_print_configuration(ulev1_conf, startconfigblock);
+ }
}
- ulev1_print_version(version);
// AUTHLIMIT, (number of failed authentications)
// 0 = limitless.
- // 1-7 = ... should we even try then?
- if ( authlim == 0 ){
- PrintAndLog("\n--- Known EV1/NTAG passwords.");
-
- uint8_t pack[4] = {0,0,0,0};
- int len=0; //if len goes to -1 the connection will be turned off.
- for (uint8_t i = 0; i < 3; ++i ){
- key = default_pwd_pack[i];
- if ( len > -1 ){
- len = ulev1_requestAuthentication(key, pack, sizeof(pack));
- PrintAndLog("Found a default password: %s || Pack: %02X %02X",sprint_hex(key, 4), pack[0], pack[1]);
+ // 1-7 = limit. No automatic tries then.
+ // hasAuthKey, if we was called with key, skip test.
+ if (!authlim && !hasAuthKey) {
+ PrintAndLogEx(NORMAL, "\n--- Known EV1/NTAG passwords.");
+ len = 0;
+ for (uint8_t i = 0; i < KEYS_PWD_COUNT; ++i ) {
+ uint8_t *key = default_pwd_pack[i];
+ len = ulev1_requestAuthentication(key, pack, sizeof(pack));
+ if (len >= 1) {
+ PrintAndLogEx(SUCCESS, "Found a default password: %s || Pack: %02X %02X", sprint_hex(key, 4), pack[0], pack[1]);
break;
+ } else {
+ if (!ul_auth_select( &card, tagtype, hasAuthKey, authenticationkey, pack, sizeof(pack))) {
+ DropField();
+ return -1;
+ }
}
}
- if (len > -1) ul_switch_off_field();
+ if (len < 1) PrintAndLogEx(WARNING, "password not known");
}
}
- if ((tagtype & (NTAG_213 | NTAG_215 | NTAG_216))){
+ DropField();
- uint8_t cc[16] = {0x00};
- status = ul_read(3, cc, sizeof(cc));
- if ( status == -1 ){
- PrintAndLog("Error: tag didn't answer to READ ntag");
- return status;
- }
- ntag_print_CC(cc);
- }
-
- ul_switch_off_field();
- PrintAndLog("");
- return 0;
+ if (locked)
+ PrintAndLogEx(FAILED, "\nTag appears to be locked, try using the key to get more info");
+ PrintAndLogEx(NORMAL, "");
+
+ return 1;
}
//
-// Mifare Ultralight Write Single Block
+// Write Single Block
//
-int CmdHF14AMfUWrBl(const char *Cmd){
- uint8_t blockNo = -1;
- bool chinese_card = FALSE;
- uint8_t bldata[16] = {0x00};
- UsbCommand resp;
+static int usage_hf_mfu_wrbl(void) {
+ PrintAndLogEx(NORMAL, "Write a block. It autodetects card type.\n");
+ PrintAndLogEx(NORMAL, "Usage: hf mfu wrbl b <block number> d <data> k <key> l\n");
+ PrintAndLogEx(NORMAL, " Options:");
+ PrintAndLogEx(NORMAL, " b <no> : block to write");
+ PrintAndLogEx(NORMAL, " d <data> : block data - (8 hex symbols)");
+ PrintAndLogEx(NORMAL, " k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
+ PrintAndLogEx(NORMAL, " l : (optional) swap entered key's endianness");
+ PrintAndLogEx(NORMAL, "");
+ PrintAndLogEx(NORMAL, " sample : hf mfu wrbl b 0 d 01234567");
+ PrintAndLogEx(NORMAL, " : hf mfu wrbl b 0 d 01234567 k AABBCCDDD\n");
+ return 0;
+}
- char cmdp = param_getchar(Cmd, 0);
- if (strlen(Cmd) < 3 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: hf mfu wrbl <block number> <block data (8 hex symbols)> [w]");
- PrintAndLog(" [block number]");
- PrintAndLog(" [block data] - (8 hex symbols)");
- PrintAndLog(" [w] - Chinese magic ultralight tag");
- PrintAndLog("");
- PrintAndLog(" sample: hf mfu wrbl 0 01020304");
- PrintAndLog("");
- return 0;
- }
-
- blockNo = param_get8(Cmd, 0);
- if (blockNo > MAX_UL_BLOCKS){
- PrintAndLog("Error: Maximum number of blocks is 15 for Ultralight Cards!");
- return 1;
- }
-
- if (param_gethex(Cmd, 1, bldata, 8)) {
- PrintAndLog("Block data must include 8 HEX symbols");
- return 1;
+static int CmdHF14AMfUWrBl(const char *Cmd){
+
+ int blockNo = -1;
+ bool errors = false;
+ uint8_t keybytes[16] = {0x00};
+ uint8_t *authenticationkey = keybytes;
+ int keyLen = 0;
+ bool hasAuthKey = false;
+ bool swapEndian = false;
+ uint8_t cmdp = 0;
+ uint8_t blockdata[20] = {0x00};
+
+ while(param_getchar(Cmd, cmdp) != 0x00) {
+ switch(param_getchar(Cmd, cmdp)) {
+ case 'h':
+ case 'H':
+ return usage_hf_mfu_wrbl();
+ case 'k':
+ case 'K':
+ keyLen = 32;
+ errors = param_gethex_ex(Cmd, cmdp+1, authenticationkey, &keyLen);
+ if (errors || (keyLen != 32 && keyLen != 8)) { //ul-c or ev1/ntag key length
+ PrintAndLogEx(ERR, "Key has incorrect length.\n");
+ errors = true;
+ }
+ cmdp += 2;
+ keyLen /= 2;
+ hasAuthKey = true;
+ break;
+ case 'b':
+ case 'B':
+ blockNo = param_get8(Cmd, cmdp+1);
+ if (blockNo < 0) {
+ PrintAndLogEx(ERR, "Wrong block number");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'l':
+ case 'L':
+ swapEndian = true;
+ cmdp++;
+ break;
+ case 'd':
+ case 'D':
+ if ( param_gethex(Cmd, cmdp+1, blockdata, 8) ) {
+ PrintAndLogEx(ERR, "Block data must include 8 HEX symbols");
+ errors = true;
+ break;
+ }
+ cmdp += 2;
+ break;
+ default:
+ PrintAndLogEx(ERR, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ //Validations
+ if(errors) return usage_hf_mfu_wrbl();
}
-
- if (strchr(Cmd,'w') != 0 || strchr(Cmd,'W') != 0 ) {
- chinese_card = TRUE;
+
+ if (blockNo == -1) return usage_hf_mfu_wrbl();
+ // starting with getting tagtype
+ TagTypeUL_t tagtype = GetHF14AMfU_Type();
+ if (tagtype == UL_ERROR) {
+ return -1;
}
-
- if ( blockNo <= 3) {
- if (!chinese_card){
- PrintAndLog("Access Denied");
- } else {
- PrintAndLog("--specialblock no:%02x", blockNo);
- PrintAndLog("--data: %s", sprint_hex(bldata, 4));
- UsbCommand d = {CMD_MIFAREU_WRITEBL, {blockNo}};
- memcpy(d.d.asBytes,bldata, 4);
- SendCommand(&d);
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- PrintAndLog("isOk:%02x", isOK);
- } else {
- PrintAndLog("Command execute timeout");
- }
- }
- } else {
- PrintAndLog("--block no:%02x", blockNo);
- PrintAndLog("--data: %s", sprint_hex(bldata, 4));
- UsbCommand e = {CMD_MIFAREU_WRITEBL, {blockNo}};
- memcpy(e.d.asBytes,bldata, 4);
- SendCommand(&e);
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- PrintAndLog("isOk:%02x", isOK);
- } else {
- PrintAndLog("Command execute timeout");
+
+ uint8_t maxblockno = 0;
+ for (uint8_t idx = 0; idx < MAX_UL_TYPES; idx++) {
+ if (tagtype & UL_TYPES_ARRAY[idx]) {
+ maxblockno = UL_MEMORY_ARRAY[idx];
+ break;
}
}
- return 0;
-}
+ if (blockNo > maxblockno){
+ DropField();
+ PrintAndLogEx(WARNING, "block number too large. Max block is %u/0x%02X \n", maxblockno,maxblockno);
+ return usage_hf_mfu_wrbl();
+ }
-//
-// Mifare Ultralight Read Single Block
-//
-int CmdHF14AMfURdBl(const char *Cmd){
+ // Swap endianness
+ if (swapEndian && hasAuthKey) authenticationkey = SwapEndian64(authenticationkey, keyLen, (keyLen == 16) ? 8 : 4);
- UsbCommand resp;
- uint8_t blockNo = -1;
- char cmdp = param_getchar(Cmd, 0);
-
- if (strlen(Cmd) < 1 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: hf mfu rdbl <block number>");
- PrintAndLog(" sample: hfu mfu rdbl 0");
- return 0;
- }
+ if ( blockNo <= 3)
+ PrintAndLogEx(NORMAL, "Special Block: %0d (0x%02X) [ %s]", blockNo, blockNo, sprint_hex(blockdata, 4));
+ else
+ PrintAndLogEx(NORMAL, "Block: %0d (0x%02X) [ %s]", blockNo, blockNo, sprint_hex(blockdata, 4));
- blockNo = param_get8(Cmd, 0);
+ //Send write Block
+ UsbCommand c = {CMD_MIFAREU_WRITEBL, {blockNo}};
+ memcpy(c.d.asBytes, blockdata, 4);
- if (blockNo > MAX_UL_BLOCKS){
- PrintAndLog("Error: Maximum number of blocks is 15 for Ultralight");
- return 1;
+ if (hasAuthKey) {
+ c.arg[1] = (keyLen == 16) ? 1 : 2;
+ memcpy(c.d.asBytes+4, authenticationkey, keyLen);
}
- UsbCommand c = {CMD_MIFAREU_READBL, {blockNo}};
+ clearCommandBuffer();
SendCommand(&c);
+ UsbCommand resp;
+ if (WaitForResponseTimeout(CMD_ACK, &resp, 1500)) {
+ uint8_t isOK = resp.arg[0] & 0xff;
+ PrintAndLogEx(SUCCESS, "isOk:%02x", isOK);
+ } else {
+ PrintAndLogEx(ERR, "Command execute timeout");
+ }
+ DropField();
+ return 0;
+}
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- if (isOK) {
- uint8_t *data = resp.d.asBytes;
- PrintAndLog("Block: %0d (0x%02X) [ %s]", (int)blockNo, blockNo, sprint_hex(data, 4));
- }
- else {
- PrintAndLog("Failed reading block: (%02x)", isOK);
- }
- } else {
- PrintAndLog("Command execute time-out");
- }
+//
+// Read Single Block
+//
+static int usage_hf_mfu_rdbl(void) {
+ PrintAndLogEx(NORMAL, "Read a block and print. It autodetects card type.\n");
+ PrintAndLogEx(NORMAL, "Usage: hf mfu rdbl b <block number> k <key> l\n");
+ PrintAndLogEx(NORMAL, " Options:");
+ PrintAndLogEx(NORMAL, " b <no> : block to read");
+ PrintAndLogEx(NORMAL, " k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
+ PrintAndLogEx(NORMAL, " l : (optional) swap entered key's endianness");
+ PrintAndLogEx(NORMAL, "");
+ PrintAndLogEx(NORMAL, " sample : hf mfu rdbl b 0");
+ PrintAndLogEx(NORMAL, " : hf mfu rdbl b 0 k 00112233445566778899AABBCCDDEEFF");
+ PrintAndLogEx(NORMAL, " : hf mfu rdbl b 0 k AABBCCDDD\n");
return 0;
}
-int usage_hf_mfu_dump(void)
-{
- PrintAndLog("Reads all pages from Ultralight, Ultralight-C, Ultralight EV1");
- PrintAndLog("and saves binary dump into the file `filename.bin` or `cardUID.bin`");
- PrintAndLog("It autodetects card type.\n");
- PrintAndLog("Usage: hf mfu dump k <key> n <filename w/o .bin>");
- PrintAndLog(" Options : ");
- PrintAndLog(" k <key> : Enter key for authentication");
- PrintAndLog(" n <FN > : Enter filename w/o .bin to save the dump as");
- PrintAndLog(" s : Swap entered key's endianness for auth");
- PrintAndLog("");
- PrintAndLog(" sample : hf mfu dump");
- PrintAndLog(" : hf mfu dump n myfile");
- return 0;
-}
-//
-// Mifare Ultralight / Ultralight-C / Ultralight-EV1
-// Read and Dump Card Contents, using auto detection of tag size.
-//
-// TODO: take a password to read UL-C / UL-EV1 tags.
-int CmdHF14AMfUDump(const char *Cmd){
-
- FILE *fout;
- char filename[FILE_PATH_SIZE] = {0x00};
- char *fnameptr = filename;
- char *str = "Dumping Ultralight%s%s Card Data...";
- uint8_t *lockbytes_t = NULL;
- uint8_t lockbytes[2] = {0x00};
- uint8_t *lockbytes_t2 = NULL;
- uint8_t lockbytes2[2] = {0x00};
- bool bit[16] = {0x00};
- bool bit2[16] = {0x00};
- uint8_t data[1024] = {0x00};
- bool hasPwd = false;
- int i = 0;
- int Pages = 16;
- bool tmplockbit = false;
- uint8_t dataLen=0;
- uint8_t cmdp =0;
- uint8_t key[16] = {0x00};
- uint8_t *keyPtr = key;
- size_t fileNlen = 0;
+
+static int CmdHF14AMfURdBl(const char *Cmd){
+
+ int blockNo = -1;
bool errors = false;
+ uint8_t keybytes[16] = {0x00};
+ uint8_t *authenticationkey = keybytes;
+ int keyLen = 0;
+ bool hasAuthKey = false;
bool swapEndian = false;
+ uint8_t cmdp = 0;
while(param_getchar(Cmd, cmdp) != 0x00)
{
switch(param_getchar(Cmd, cmdp))
{
- case 'h':
- case 'H':
- return usage_hf_mfu_dump();
- case 'k':
- case 'K':
- dataLen = param_gethex(Cmd, cmdp+1, data, 32);
- if (dataLen) {
- errors = true;
- } else {
- memcpy(key, data, 16);
- }
- cmdp += 2;
- hasPwd = true;
- break;
- case 'n':
- case 'N':
- fileNlen = param_getstr(Cmd, cmdp+1, filename);
- if (!fileNlen) errors = true;
- if (fileNlen > FILE_PATH_SIZE-5) fileNlen = FILE_PATH_SIZE-5;
- cmdp += 2;
- break;
- case 's':
- swapEndian = true;
- cmdp++;
- break;
- default:
- PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
- errors = true;
- break;
+ case 'h':
+ case 'H':
+ return usage_hf_mfu_rdbl();
+ case 'k':
+ case 'K':
+ keyLen = 32;
+ errors = param_gethex_ex(Cmd, cmdp+1, authenticationkey, &keyLen);
+ if (errors || (keyLen != 32 && keyLen != 8)) { //ul-c or ev1/ntag key length
+ PrintAndLogEx(ERR, "Key has incorrect length.\n");
+ errors = true;
+ }
+ cmdp += 2;
+ keyLen /= 2;
+ hasAuthKey = true;
+ break;
+ case 'b':
+ case 'B':
+ blockNo = param_get8(Cmd, cmdp+1);
+ if (blockNo < 0) {
+ PrintAndLogEx(ERR, "Wrong block number");
+ errors = true;
+ }
+ cmdp += 2;
+ break;
+ case 'l':
+ case 'L':
+ swapEndian = true;
+ cmdp++;
+ break;
+ default:
+ PrintAndLogEx(WARNING, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
}
- if(errors) break;
+ //Validations
+ if (errors) return usage_hf_mfu_rdbl();
}
- //Validations
- if(errors) return usage_hf_mfu_dump();
-
- if (swapEndian)
- keyPtr = SwapEndian64(data, 16);
-
+ if (blockNo == -1) return usage_hf_mfu_rdbl();
+ // start with getting tagtype
TagTypeUL_t tagtype = GetHF14AMfU_Type();
- if (tagtype == UL_ERROR) return -1;
-
- if ( tagtype & UL ) {
- Pages = 16;
- PrintAndLog(str,"", (tagtype & MAGIC)?" (magic)":"" );
- }
- else if ( tagtype & UL_C ) {
- Pages = 44;
- PrintAndLog(str,"-C", (tagtype & MAGIC)?" (magic)":"" );
+ if (tagtype == UL_ERROR) {
+ return -1;
}
- else if ( tagtype & UL_EV1_48 ) {
- Pages = 18;
- PrintAndLog(str," EV1_48","");
+
+ uint8_t maxblockno = 0;
+ for (uint8_t idx = 0; idx < MAX_UL_TYPES; idx++) {
+ if (tagtype & UL_TYPES_ARRAY[idx]) {
+ maxblockno = UL_MEMORY_ARRAY[idx];
+ break;
+ }
}
- else if ( tagtype & UL_EV1_128 ) {
- Pages = 32;
- PrintAndLog(str," EV1_128","");
- } else {
- Pages = 16;
- PrintAndLog("Dumping unknown Ultralight, using default values.");
+ if (blockNo > maxblockno){
+ DropField();
+ PrintAndLogEx(WARNING, "block number to large. Max block is %u/0x%02X \n", maxblockno,maxblockno);
+ return usage_hf_mfu_rdbl();
}
- UsbCommand c = {CMD_MIFAREUC_READCARD, {0,Pages}};
- if ( hasPwd ) {
- c.arg[2] = 1;
- memcpy(c.d.asBytes, key, 16);
+ // Swap endianness
+ if (swapEndian) authenticationkey = SwapEndian64(authenticationkey, keyLen, (keyLen == 16) ? 8 : 4);
+
+ //Read Block
+ UsbCommand c = {CMD_MIFAREU_READBL, {blockNo}};
+ if (hasAuthKey) {
+ c.arg[1] = (keyLen == 16) ? 1 : 2;
+ memcpy(c.d.asBytes, authenticationkey, keyLen);
}
+
+ clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
- if (!WaitForResponseTimeout(CMD_ACK, &resp,1500)) {
- PrintAndLog("Command execute time-out");
- return 1;
- }
- PrintAndLog ("%u,%u",resp.arg[0],resp.arg[1]);
- uint8_t isOK = resp.arg[0] & 0xff;
- if (isOK) {
- memcpy(data, resp.d.asBytes, resp.arg[1]);
+ if (WaitForResponseTimeout(CMD_ACK, &resp, 1500)) {
+ uint8_t isOK = resp.arg[0] & 0xff;
+ if (isOK) {
+ uint8_t *data = resp.d.asBytes;
+ PrintAndLogEx(NORMAL, "\n Block# | Data | Ascii");
+ PrintAndLogEx(NORMAL, "---------+-------------+------");
+ PrintAndLogEx(NORMAL, " %02d/0x%02X | %s| %s\n", blockNo, blockNo, sprint_hex(data, 4), sprint_ascii(data, 4));
+ } else {
+ PrintAndLogEx(ERR, "Failed reading block: (%02x)", isOK);
+ }
} else {
- PrintAndLog("Failed reading block: (%02x)", i);
- return 1;
+ PrintAndLogEx(ERR, "Command execute time-out");
}
+ DropField();
+ return 0;
+}
+
+
+//
+// Mifare Ultralight / Ultralight-C / Ultralight-EV1
+// Read and Dump Card Contents, using auto detection of tag size.
- // Load lock bytes.
- int j = 0;
+typedef struct {
+ uint8_t version[8];
+ uint8_t tbo[2];
+ uint8_t tbo1[1];
+ uint8_t pages; // max page number in dump
+ uint8_t signature[32];
+ uint8_t counter_tearing[3][4]; // 3 bytes counter, 1 byte tearing flag
+ uint8_t data[1024];
+} mfu_dump_t;
- lockbytes_t = data + 8;
- lockbytes[0] = lockbytes_t[2];
- lockbytes[1] = lockbytes_t[3];
- for(j = 0; j < 16; j++){
- bit[j] = lockbytes[j/8] & ( 1 <<(7-j%8));
+
+static void printMFUdumpEx(mfu_dump_t *card, uint16_t pages, uint8_t startpage, TagTypeUL_t tagtype) {
+
+ bool tmplockbit = false;
+ bool bit[16] = {false};
+ bool bit2[16] = {false};
+
+ // standard lock bits
+ for(int i = 0; i < 16; i++){
+ bit[i] = card->data[10+i/8] & (1 << (7-i%8));
}
- // Load bottom lockbytes if available
- if ( Pages == 44 ) {
- lockbytes_t2 = data + (40*4);
- lockbytes2[0] = lockbytes_t2[2];
- lockbytes2[1] = lockbytes_t2[3];
- for (j = 0; j < 16; j++) {
- bit2[j] = lockbytes2[j/8] & ( 1 <<(7-j%8));
+ // dynamic lock bits
+ // TODO -- FIGURE OUT LOCK BYTES FOR EV1 and/or NTAG
+ if (tagtype & UL_C) {
+ for (int i = 0; i < 16; i++) {
+ bit2[i] = card->data[40*4+i/8] & (1 << (7-i%8));
}
}
- // add keys
- if (hasPwd){
- memcpy(data + Pages*4, key, 16);
- Pages += 4;
- }
- for (i = 0; i < Pages; ++i) {
- if ( i < 3 ) {
- PrintAndLog("Block %02x:%s ", i,sprint_hex(data + i * 4, 4));
+ PrintAndLogEx(NORMAL, "\n Block# | Data |lck| Ascii");
+ PrintAndLogEx(NORMAL, "---------+-------------+---+------");
+
+ for (int i = startpage; i < startpage + pages; i++) {
+ if (i < 3) {
+ PrintAndLogEx(NORMAL, "%3d/0x%02X | %s| | ", i, i, sprint_hex(card->data + i * 4, 4));
continue;
}
switch(i){
case 3: tmplockbit = bit[4]; break;
- case 4: tmplockbit = bit[3]; break;
- case 5: tmplockbit = bit[2]; break;
- case 6: tmplockbit = bit[1]; break;
- case 7: tmplockbit = bit[0]; break;
- case 8: tmplockbit = bit[15]; break;
+ case 4: tmplockbit = bit[3]; break;
+ case 5: tmplockbit = bit[2]; break;
+ case 6: tmplockbit = bit[1]; break;
+ case 7: tmplockbit = bit[0]; break;
+ case 8: tmplockbit = bit[15]; break;
case 9: tmplockbit = bit[14]; break;
case 10: tmplockbit = bit[13]; break;
case 11: tmplockbit = bit[12]; break;
case 20:
case 21:
case 22:
- case 23: tmplockbit = bit2[5]; break;
+ case 23: tmplockbit = bit2[5]; break;
case 24:
case 25:
case 26:
- case 27: tmplockbit = bit2[4]; break;
+ case 27: tmplockbit = bit2[4]; break;
case 28:
case 29:
case 30:
case 32:
case 33:
case 34:
- case 35: tmplockbit = bit2[1]; break;
+ case 35: tmplockbit = bit2[1]; break;
case 36:
case 37:
case 38:
- case 39: tmplockbit = bit2[0]; break;
+ case 39: tmplockbit = bit2[0]; break;
case 40: tmplockbit = bit2[12]; break;
case 41: tmplockbit = bit2[11]; break;
case 42: tmplockbit = bit2[10]; break; //auth0
case 43: tmplockbit = bit2[9]; break; //auth1
default: break;
}
- PrintAndLog("Block %02x:%s [%d]", i,sprint_hex(data + i * 4, 4),tmplockbit);
- }
-
- // user supplied filename?
- if (fileNlen < 1) {
- // UID = data 0-1-2 4-5-6-7 (skips a beat)
- sprintf(fnameptr,"%02X%02X%02X%02X%02X%02X%02X.bin",
- data[0],data[1], data[2], data[4],data[5],data[6], data[7]);
- } else {
- sprintf(fnameptr + fileNlen," .bin");
- }
- if ((fout = fopen(filename,"wb")) == NULL) {
- PrintAndLog("Could not create file name %s", filename);
- return 1;
+ PrintAndLogEx(NORMAL, "%3d/0x%02X | %s| %d | %.4s", i, i, sprint_hex(card->data + i * 4, 4), tmplockbit, sprint_ascii(card->data + i * 4, 4));
}
- fwrite( data, 1, Pages*4, fout );
- fclose(fout);
-
- PrintAndLog("Dumped %d pages, wrote %d bytes to %s", Pages, Pages*4, filename);
- return 0;
+ PrintAndLogEx(NORMAL, "---------------------------------");
}
-// Needed to Authenticate to Ultralight C tags
-void rol (uint8_t *data, const size_t len){
- uint8_t first = data[0];
- for (size_t i = 0; i < len-1; i++) {
- data[i] = data[i+1];
- }
- data[len-1] = first;
+
+static int usage_hf_mfu_dump(void) {
+ PrintAndLogEx(NORMAL, "Reads all pages from Ultralight, Ultralight-C, Ultralight EV1");
+ PrintAndLogEx(NORMAL, "NTAG 203, NTAG 210, NTAG 212, NTAG 213, NTAG 215, NTAG 216");
+ PrintAndLogEx(NORMAL, "and saves binary dump into the file `filename.bin` or `cardUID.bin`");
+ PrintAndLogEx(NORMAL, "It autodetects card type.\n");
+ PrintAndLogEx(NORMAL, "Usage: hf mfu dump k <key> l n <filename w/o .bin>");
+ PrintAndLogEx(NORMAL, " Options : ");
+ PrintAndLogEx(NORMAL, " k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
+ PrintAndLogEx(NORMAL, " l : (optional) swap entered key's endianness");
+ PrintAndLogEx(NORMAL, " f <FN > : filename w/o .bin to save the dump as");
+ PrintAndLogEx(NORMAL, " p <Pg > : starting Page number to manually set a page to start the dump at");
+ PrintAndLogEx(NORMAL, " q <qty> : number of Pages to manually set how many pages to dump");
+
+ PrintAndLogEx(NORMAL, "");
+ PrintAndLogEx(NORMAL, " sample : hf mfu dump");
+ PrintAndLogEx(NORMAL, " : hf mfu dump n myfile");
+ PrintAndLogEx(NORMAL, " : hf mfu dump k 00112233445566778899AABBCCDDEEFF");
+ PrintAndLogEx(NORMAL, " : hf mfu dump k AABBCCDDD\n");
+ return 0;
}
-//-------------------------------------------------------------------------------
-// Ultralight C Methods
-//-------------------------------------------------------------------------------
-//
-// Ultralight C Authentication Demo {currently uses hard-coded key}
-//
-int CmdHF14AMfucAuth(const char *Cmd){
+static int CmdHF14AMfUDump(const char *Cmd){
- uint8_t keyNo = 0;
+ char filename[FILE_PATH_SIZE] = {'\0'};
+ size_t fileNameLen = 0;
+ uint8_t keybytes[16] = {0x00};
+ uint8_t *authenticationkey = keybytes;
+ int keyLen = 0;
+ bool hasAuthKey = false;
+ uint8_t cmdp = 0;
bool errors = false;
+ bool swapEndian = false;
+ bool manualPages = false;
+ uint8_t startPage = 0;
+ int Pages = 16;
+ iso14a_card_select_t card_select;
+ mfu_dump_t card;
- char cmdp = param_getchar(Cmd, 0);
-
- //Change key to user defined one
- if (cmdp == 'k' || cmdp == 'K'){
- keyNo = param_get8(Cmd, 1);
- if(keyNo > 6)
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ case 'H':
+ return usage_hf_mfu_dump();
+ case 'k':
+ case 'K':
+ keyLen = 32;
+ errors = param_gethex_ex(Cmd, cmdp+1, authenticationkey, &keyLen);
+ if (errors || (keyLen != 32 && keyLen != 8)) { //ul-c or ev1/ntag key length
+ PrintAndLogEx(ERR, "Key has incorrect length.\n");
+ errors = true;
+ }
+ cmdp += 2;
+ keyLen /= 2;
+ hasAuthKey = true;
+ break;
+ case 'l':
+ case 'L':
+ swapEndian = true;
+ cmdp++;
+ break;
+ case 'f':
+ case 'F':
+ fileNameLen = param_getstr(Cmd, cmdp+1, filename, sizeof(filename));
+ if (fileNameLen == 0) errors = true;
+ if (fileNameLen > FILE_PATH_SIZE-5) fileNameLen = FILE_PATH_SIZE-5;
+ cmdp += 2;
+ break;
+ case 'p':
+ case 'P':
+ startPage = param_get8(Cmd, cmdp+1);
+ manualPages = true;
+ cmdp += 2;
+ break;
+ case 'q':
+ case 'Q':
+ Pages = param_get8(Cmd, cmdp+1);
+ cmdp += 2;
+ manualPages = true;
+ break;
+ default:
+ PrintAndLogEx(ERR, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
errors = true;
+ break;
+ }
+ if (errors) break;
}
- if (cmdp == 'h' || cmdp == 'H')
- errors = true;
-
- if (errors) {
- PrintAndLog("Usage: hf mfu cauth k <key number>");
- PrintAndLog(" 0 (default): 3DES standard key");
- PrintAndLog(" 1 : all 0x00 key");
- PrintAndLog(" 2 : 0x00-0x0F key");
- PrintAndLog(" 3 : nfc key");
- PrintAndLog(" 4 : all 0x01 key");
- PrintAndLog(" 5 : all 0xff key");
- PrintAndLog(" 6 : 0x00-0xFF key");
- PrintAndLog("\n sample : hf mfu cauth k");
- PrintAndLog(" : hf mfu cauth k 3");
- return 0;
- }
-
- uint8_t *key = default_3des_keys[keyNo];
- if (try3DesAuthentication(key)>0)
- PrintAndLog("Authentication successful. 3des key: %s",sprint_hex(key, 16));
- else
- PrintAndLog("Authentication failed");
-
- return 0;
-}
+ //Validations
+ if (errors) return usage_hf_mfu_dump();
-int try3DesAuthentication( uint8_t *key){
-
- uint8_t blockNo = 0;
- uint32_t cuid = 0;
+ if (swapEndian && hasAuthKey)
+ authenticationkey = SwapEndian64(authenticationkey, keyLen, (keyLen == 16) ? 8 : 4);
- des3_context ctx = { 0 };
-
- uint8_t random_a[8] = { 1,1,1,1,1,1,1,1 };
- uint8_t random_b[8] = { 0 };
- uint8_t enc_random_b[8] = { 0 };
- uint8_t rnd_ab[16] = { 0 };
- uint8_t iv[8] = { 0 };
+ TagTypeUL_t tagtype = GetHF14AMfU_Type();
- UsbCommand c = {CMD_MIFAREUC_AUTH1, {blockNo}};
- SendCommand(&c);
- UsbCommand resp;
- if ( !WaitForResponseTimeout(CMD_ACK, &resp, 1500) ) return -1;
- if ( !(resp.arg[0] & 0xff) ) return -2;
-
- cuid = resp.arg[1];
- memcpy(enc_random_b,resp.d.asBytes+1,8);
+ if (tagtype == UL_ERROR) {
+ return -1;
+ }
- des3_set2key_dec(&ctx, key);
- // context, mode, length, IV, input, output
- des3_crypt_cbc( &ctx, DES_DECRYPT, sizeof(random_b), iv , enc_random_b , random_b);
+ uint8_t maxPages = 0;
+ for (uint8_t idx = 0; idx < MAX_UL_TYPES; idx++) {
+ if (tagtype & UL_TYPES_ARRAY[idx]) {
+ maxPages = UL_MEMORY_ARRAY[idx]+1; //add one as maxblks starts at 0
+ break;
+ }
+ }
- rol(random_b,8);
- memcpy(rnd_ab ,random_a,8);
- memcpy(rnd_ab+8,random_b,8);
+ if (!manualPages) {
+ Pages = maxPages;
+ } else {
+ if (startPage + Pages - 1 > maxPages - 1) {
+ PrintAndLogEx(ERR, "Invalid page range. Card has only %d readable pages.", maxPages);
+ DropField();
+ return 1;
+ }
+ }
- des3_set2key_enc(&ctx, key);
- // context, mode, length, IV, input, output
- des3_crypt_cbc(&ctx, DES_ENCRYPT, sizeof(rnd_ab), enc_random_b, rnd_ab, rnd_ab);
+ ul_print_type(tagtype, 0);
+
+ PrintAndLogEx(NORMAL, "Reading tag memory...");
+ memset(&card, 0x00, sizeof(card));
+ UsbCommand c = {CMD_MIFAREU_READCARD, {startPage, Pages}};
+ if (hasAuthKey) {
+ if (tagtype & UL_C)
+ c.arg[2] = 1; //UL_C auth
+ else
+ c.arg[2] = 2; //UL_EV1/NTAG auth
+ memcpy(c.d.asBytes, authenticationkey, keyLen);
+ }
- //Auth2
- c.cmd = CMD_MIFAREUC_AUTH2;
- c.arg[0] = cuid;
- memcpy(c.d.asBytes, rnd_ab, 16);
+ clearCommandBuffer();
SendCommand(&c);
-
- if ( !WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return -1;
- if ( !(resp.arg[0] & 0xff)) return -2;
-
- uint8_t enc_resp[8] = { 0 };
- uint8_t resp_random_a[8] = { 0 };
- memcpy(enc_resp, resp.d.asBytes+1, 8);
-
- des3_set2key_dec(&ctx, key);
- // context, mode, length, IV, input, output
- des3_crypt_cbc( &ctx, DES_DECRYPT, 8, enc_random_b, enc_resp, resp_random_a);
-
- if ( !memcmp(resp_random_a, random_a, 8))
- return 1;
- return 0;
-
- //PrintAndLog(" RndA :%s", sprint_hex(random_a, 8));
- //PrintAndLog(" enc(RndB) :%s", sprint_hex(enc_random_b, 8));
- //PrintAndLog(" RndB :%s", sprint_hex(random_b, 8));
- //PrintAndLog(" A+B :%s", sprint_hex(random_a_and_b, 16));
- //PrintAndLog(" enc(A+B) :%s", sprint_hex(random_a_and_b, 16));
- //PrintAndLog(" enc(RndA') :%s", sprint_hex(data2+1, 8));
-}
-
-/**
-A test function to validate that the polarssl-function works the same
-was as the openssl-implementation.
-Commented out, since it requires openssl
-
-int CmdTestDES(const char * cmd)
-{
- uint8_t key[16] = {0x00};
-
- memcpy(key,key3_3des_data,16);
- DES_cblock RndA, RndB;
-
- PrintAndLog("----------OpenSSL DES implementation----------");
- {
- uint8_t e_RndB[8] = {0x00};
- unsigned char RndARndB[16] = {0x00};
-
- DES_cblock iv = { 0 };
- DES_key_schedule ks1,ks2;
- DES_cblock key1,key2;
-
- memcpy(key,key3_3des_data,16);
- memcpy(key1,key,8);
- memcpy(key2,key+8,8);
-
-
- DES_set_key((DES_cblock *)key1,&ks1);
- DES_set_key((DES_cblock *)key2,&ks2);
-
- DES_random_key(&RndA);
- PrintAndLog(" RndA:%s",sprint_hex(RndA, 8));
- PrintAndLog(" e_RndB:%s",sprint_hex(e_RndB, 8));
- //void DES_ede2_cbc_encrypt(const unsigned char *input,
- // unsigned char *output, long length, DES_key_schedule *ks1,
- // DES_key_schedule *ks2, DES_cblock *ivec, int enc);
- DES_ede2_cbc_encrypt(e_RndB,RndB,sizeof(e_RndB),&ks1,&ks2,&iv,0);
-
- PrintAndLog(" RndB:%s",sprint_hex(RndB, 8));
- rol(RndB,8);
- memcpy(RndARndB,RndA,8);
- memcpy(RndARndB+8,RndB,8);
- PrintAndLog(" RA+B:%s",sprint_hex(RndARndB, 16));
- DES_ede2_cbc_encrypt(RndARndB,RndARndB,sizeof(RndARndB),&ks1,&ks2,&e_RndB,1);
- PrintAndLog("enc(RA+B):%s",sprint_hex(RndARndB, 16));
-
+ UsbCommand resp;
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) {
+ PrintAndLogEx(ERR, "Command execution timeout");
+ DropField();
+ return 1;
+ }
+ if (resp.arg[0] != 1) {
+ PrintAndLogEx(ERR, "Failed reading card");
+ DropField();
+ return 1;
}
- PrintAndLog("----------PolarSSL implementation----------");
- {
- uint8_t random_a[8] = { 0 };
- uint8_t enc_random_a[8] = { 0 };
- uint8_t random_b[8] = { 0 };
- uint8_t enc_random_b[8] = { 0 };
- uint8_t random_a_and_b[16] = { 0 };
- des3_context ctx = { 0 };
-
- memcpy(random_a, RndA,8);
-
- uint8_t output[8] = { 0 };
- uint8_t iv[8] = { 0 };
-
- PrintAndLog(" RndA :%s",sprint_hex(random_a, 8));
- PrintAndLog(" e_RndB:%s",sprint_hex(enc_random_b, 8));
-
- des3_set2key_dec(&ctx, key);
-
- des3_crypt_cbc(&ctx // des3_context *ctx
- , DES_DECRYPT // int mode
- , sizeof(random_b) // size_t length
- , iv // unsigned char iv[8]
- , enc_random_b // const unsigned char *input
- , random_b // unsigned char *output
- );
- PrintAndLog(" RndB:%s",sprint_hex(random_b, 8));
+ uint32_t startindex = resp.arg[2];
+ uint32_t bufferSize = resp.arg[1];
+ if (bufferSize > sizeof(card.data)) {
+ PrintAndLogEx(FAILED, "Data exceeded Buffer size!");
+ bufferSize = sizeof(card.data);
+ }
- rol(random_b,8);
- memcpy(random_a_and_b ,random_a,8);
- memcpy(random_a_and_b+8,random_b,8);
-
- PrintAndLog(" RA+B:%s",sprint_hex(random_a_and_b, 16));
+ if (!GetFromBigBuf(card.data + startPage*4, bufferSize, startindex, NULL, -1, false)) {
+ PrintAndLogEx(ERR, "Command execution timeout");
+ DropField();
+ return 1;
+ }
- des3_set2key_enc(&ctx, key);
+ // not ul_c and not std ul then attempt to collect
+ // VERSION, SIGNATURE, COUNTERS, TEARING, PACK
+ if (!(tagtype & UL_C || tagtype & UL)) {
+ //attempt to read pack
+ if (!ul_auth_select(&card_select, tagtype, true, authenticationkey, card.data + maxPages*4 - 4, 2)) {
+ //reset pack
+ card.data[maxPages*4 - 4] = 0;
+ card.data[maxPages*4 - 3] = 0;
+ }
- des3_crypt_cbc(&ctx // des3_context *ctx
- , DES_ENCRYPT // int mode
- , sizeof(random_a_and_b) // size_t length
- , enc_random_b // unsigned char iv[8]
- , random_a_and_b // const unsigned char *input
- , random_a_and_b // unsigned char *output
- );
+ if (hasAuthKey) {
+ uint8_t dummy_pack[2];
+ ul_auth_select(&card_select, tagtype, hasAuthKey, authenticationkey, dummy_pack, sizeof(dummy_pack));
+ } else {
+ ul_select(&card_select, false);
+ }
+ ulev1_getVersion(card.version, sizeof(card.version));
+ for (uint8_t n = 0; n < 3; ++n) {
+ ulev1_readTearing(n, &card.counter_tearing[n][3], 1);
+ ulev1_readCounter(n, &card.counter_tearing[n][0], 3);
+ }
- PrintAndLog("enc(RA+B):%s",sprint_hex(random_a_and_b, 16));
+ ulev1_readSignature(card.signature, sizeof(card.signature));
}
- return 0;
-}
-**/
-//
-// Ultralight C Read Single Block
-//
-int CmdHF14AMfUCRdBl(const char *Cmd)
-{
- UsbCommand resp;
- bool hasPwd = FALSE;
- uint8_t blockNo = -1;
- uint8_t key[16];
- char cmdp = param_getchar(Cmd, 0);
-
- if (strlen(Cmd) < 1 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: hf mfu crdbl <block number> <key>");
- PrintAndLog("");
- PrintAndLog("sample: hf mfu crdbl 0");
- PrintAndLog(" hf mfu crdbl 0 00112233445566778899AABBCCDDEEFF");
- return 0;
+ DropField();
+
+ // add key to dump data
+ if (hasAuthKey) {
+ authenticationkey = SwapEndian64(authenticationkey, keyLen, (keyLen == 16) ? 8 : 4);
+ if (tagtype & UL_C){ // additional 4 pages
+ memcpy(card.data + maxPages*4, authenticationkey, keyLen);
+ maxPages += 4;
+ } else { // 2nd page from end
+ memcpy(card.data + (maxPages*4) - 8, authenticationkey, 4);
+ }
}
- blockNo = param_get8(Cmd, 0);
- if (blockNo < 0) {
- PrintAndLog("Wrong block number");
- return 1;
- }
+ printMFUdumpEx(&card, Pages, startPage, tagtype);
- if (blockNo > MAX_ULC_BLOCKS ){
- PrintAndLog("Error: Maximum number of blocks is 47 for Ultralight-C");
- return 1;
- }
-
- // key
- if ( strlen(Cmd) > 3){
- if (param_gethex(Cmd, 1, key, 32)) {
- PrintAndLog("Key must include %d HEX symbols", 32);
- return 1;
+ if (!manualPages) {
+ // user supplied filename?
+ if (fileNameLen < 1) {
+ char *fptr = filename;
+ fptr += sprintf(fptr, "hf-mfu-");
+ uint8_t UID[] = {card.data[0], card.data[1], card.data[2], card.data[4], card.data[5], card.data[6], card.data[7]};
+ FillFileNameByUID(fptr, UID, "-dump.bin", 7);
} else {
- hasPwd = TRUE;
- }
- }
- //uint8_t *key2 = SwapEndian64(key, 16);
+ sprintf(filename + fileNameLen, ".bin");
+ }
- //Read Block
- UsbCommand c = {CMD_MIFAREU_READBL, {blockNo}};
- if ( hasPwd ) {
- c.arg[1] = 1;
- memcpy(c.d.asBytes,key,16);
- }
- SendCommand(&c);
+#define MFU_DUMP_PREFIX_LENGTH (sizeof(card) - sizeof(card.data))
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- if (isOK) {
- uint8_t *data = resp.d.asBytes;
- PrintAndLog("Block: %0d (0x%02X) [ %s]", (int)blockNo, blockNo, sprint_hex(data, 4));
- }
- else {
- PrintAndLog("Failed reading block: (%02x)", isOK);
+ FILE *fout;
+ if ((fout = fopen(filename, "wb")) == NULL) {
+ PrintAndLogEx(ERR, "Could not create file name %s", filename);
+ return 1;
}
- } else {
- PrintAndLog("Command execute time-out");
+ fwrite(&card, 1, MFU_DUMP_PREFIX_LENGTH + maxPages*4, fout);
+ fclose(fout);
+
+ PrintAndLogEx(SUCCESS, "Dumped %d pages, wrote %d bytes to %s", maxPages, MFU_DUMP_PREFIX_LENGTH + maxPages*4, filename);
}
+
return 0;
}
+
+//-------------------------------------------------------------------------------
+// Ultralight C Methods
+//-------------------------------------------------------------------------------
+
//
-// Mifare Ultralight C Write Single Block
+// Ultralight C Authentication Demo {currently uses hard-coded key}
//
-int CmdHF14AMfUCWrBl(const char *Cmd){
-
- uint8_t blockNo = -1;
- bool chinese_card = FALSE;
- uint8_t bldata[16] = {0x00};
- UsbCommand resp;
+static int CmdHF14AMfucAuth(const char *Cmd){
+
+ uint8_t keyNo = 3;
+ bool errors = false;
char cmdp = param_getchar(Cmd, 0);
-
- if (strlen(Cmd) < 3 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: hf mfu cwrbl <block number> <block data (8 hex symbols)> [w]");
- PrintAndLog(" [block number]");
- PrintAndLog(" [block data] - (8 hex symbols)");
- PrintAndLog(" [w] - Chinese magic ultralight tag");
- PrintAndLog("");
- PrintAndLog(" sample: hf mfu cwrbl 0 01020304");
- PrintAndLog("");
- return 0;
- }
-
- blockNo = param_get8(Cmd, 0);
- if (blockNo > MAX_ULC_BLOCKS ){
- PrintAndLog("Error: Maximum number of blocks is 47 for Ultralight-C Cards!");
- return 1;
- }
-
- if (param_gethex(Cmd, 1, bldata, 8)) {
- PrintAndLog("Block data must include 8 HEX symbols");
- return 1;
+
+ //Change key to user defined one
+ if (cmdp == 'k' || cmdp == 'K'){
+ keyNo = param_get8(Cmd, 1);
+ if(keyNo > KEYS_3DES_COUNT-1)
+ errors = true;
}
- if (strchr(Cmd,'w') != 0 || strchr(Cmd,'W') != 0 ) {
- chinese_card = TRUE;
+ if (cmdp == 'h' || cmdp == 'H')
+ errors = true;
+
+ if (errors) {
+ PrintAndLogEx(NORMAL, "Usage: hf mfu cauth k <key number>");
+ PrintAndLogEx(NORMAL, " 0 (default): 3DES standard key");
+ PrintAndLogEx(NORMAL, " 1 : all 0x00 key");
+ PrintAndLogEx(NORMAL, " 2 : 0x00-0x0F key");
+ PrintAndLogEx(NORMAL, " 3 : nfc key");
+ PrintAndLogEx(NORMAL, " 4 : all 0x01 key");
+ PrintAndLogEx(NORMAL, " 5 : all 0xff key");
+ PrintAndLogEx(NORMAL, " 6 : 0x00-0xFF key");
+ PrintAndLogEx(NORMAL, "\n sample : hf mfu cauth k");
+ PrintAndLogEx(NORMAL, " : hf mfu cauth k 3");
+ return 0;
}
- if ( blockNo <= 3 ) {
- if (!chinese_card){
- PrintAndLog("Access Denied");
- return 1;
- } else {
- PrintAndLog("--Special block no: 0x%02x", blockNo);
- PrintAndLog("--Data: %s", sprint_hex(bldata, 4));
- UsbCommand d = {CMD_MIFAREU_WRITEBL, {blockNo}};
- memcpy(d.d.asBytes,bldata, 4);
- SendCommand(&d);
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- PrintAndLog("isOk:%02x", isOK);
- } else {
- PrintAndLog("Command execute timeout");
- return 1;
- }
- }
+ uint8_t *key = default_3des_keys[keyNo];
+ if (ulc_authentication(key, true)) {
+ DropField();
+ PrintAndLogEx(SUCCESS, "Authentication successful. 3des key: %s",sprint_hex(key, 16));
} else {
- PrintAndLog("--Block no : 0x%02x", blockNo);
- PrintAndLog("--Data: %s", sprint_hex(bldata, 4));
- UsbCommand e = {CMD_MIFAREU_WRITEBL, {blockNo}};
- memcpy(e.d.asBytes,bldata, 4);
- SendCommand(&e);
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- uint8_t isOK = resp.arg[0] & 0xff;
- PrintAndLog("isOk : %02x", isOK);
- } else {
- PrintAndLog("Command execute timeout");
- return 1;
- }
+ DropField();
+ PrintAndLogEx(WARNING, "Authentication failed");
}
return 0;
}
-//
+
+//
// Mifare Ultralight C - Set password
//
-int CmdHF14AMfucSetPwd(const char *Cmd){
+static int CmdHF14AMfucSetPwd(const char *Cmd){
uint8_t pwd[16] = {0x00};
-
+
char cmdp = param_getchar(Cmd, 0);
-
- if (strlen(Cmd) == 0 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog
("Usage: hf mfu setpwd <password (32 hex symbols)>");
- PrintAndLog(" [password] - (32 hex symbols)");
- PrintAndLog("");
- PrintAndLog("sample: hf mfu setpwd 000102030405060708090a0b0c0d0e0f");
- PrintAndLog("");
+
+ if (strlen(Cmd) == 0 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog
Ex(NORMAL, "Usage: hf mfu setpwd <password (32 hex symbols)>");
+ PrintAndLogEx(NORMAL, " [password] - (32 hex symbols)");
+ PrintAndLogEx(NORMAL, "");
+ PrintAndLogEx(NORMAL, "sample: hf mfu setpwd 000102030405060708090a0b0c0d0e0f");
+ PrintAndLogEx(NORMAL, "");
return 0;
}
-
+
if (param_gethex(Cmd, 0, pwd, 32)) {
- PrintAndLog("Password must include 32 HEX symbols");
+ PrintAndLogEx(WARNING, "Password must include 32 HEX symbols");
return 1;
}
-
- UsbCommand c = {CMD_MIFAREUC_SETPWD};
+
+ UsbCommand c = {CMD_MIFAREUC_SETPWD};
memcpy( c.d.asBytes, pwd, 16);
+ clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
-
- if (WaitForResponseTimeout(CMD_ACK,&resp,1500) ) {
- if ( (resp.arg[0] & 0xff) == 1)
- PrintAndLog("Ultralight-C new password: %s", sprint_hex(pwd,16));
- else{
- PrintAndLog("Failed writing at block %d", resp.arg[1] & 0xff);
+
+ if (WaitForResponseTimeout(CMD_ACK, &resp, 1500) ) {
+ DropField();
+ if ((resp.arg[0] & 0xff) == 1) {
+ PrintAndLogEx(INFO, "Ultralight-C new password: %s", sprint_hex(pwd,16));
+ return 0;
+ } else {
+ PrintAndLogEx(ERR, "Failed writing at block %d", resp.arg[1] & 0xff);
return 1;
}
- }
- else {
- PrintAndLog("command execution time out");
+ } else {
+ DropField();
+ PrintAndLogEx(ERR, "command execution timeout");
return 1;
}
-
+
return 0;
}
//
// Magic UL / UL-C tags - Set UID
//
-int CmdHF14AMfucSetUid(const char *Cmd){
+static int CmdHF14AMfucSetUid(const char *Cmd){
UsbCommand c;
UsbCommand resp;
uint8_t uid[7] = {0x00};
char cmdp = param_getchar(Cmd, 0);
-
- if (strlen(Cmd) == 0 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: hf mfu setuid <uid (14 hex symbols)>");
- PrintAndLog(" [uid] - (14 hex symbols)");
- PrintAndLog("\nThis only works for Magic Ultralight tags.");
- PrintAndLog("");
- PrintAndLog("sample: hf mfu setuid 11223344556677");
- PrintAndLog("");
+
+ if (strlen(Cmd) == 0 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLogEx(NORMAL, "Usage: hf mfu setuid <uid (14 hex symbols)>");
+ PrintAndLogEx(NORMAL, " [uid] - (14 hex symbols)");
+ PrintAndLogEx(NORMAL, "\nThis only works for Magic Ultralight tags.");
+ PrintAndLogEx(NORMAL, "");
+ PrintAndLogEx(NORMAL, "sample: hf mfu setuid 11223344556677");
+ PrintAndLogEx(NORMAL, "");
return 0;
}
-
+
if (param_gethex(Cmd, 0, uid, 14)) {
- PrintAndLog("UID must include 14 HEX symbols");
+ PrintAndLogEx(WARNING, "UID must include 14 HEX symbols");
return 1;
}
- // read block2.
+ // read block2.
c.cmd = CMD_MIFAREU_READBL;
c.arg[0] = 2;
+ clearCommandBuffer();
SendCommand(&c);
if (!WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- PrintAndLog("Command execute timeout");
+ DropField();
+ PrintAndLogEx(WARNING, "Command execute timeout");
return 2;
}
-
+
// save old block2.
uint8_t oldblock2[4] = {0x00};
memcpy(resp.d.asBytes, oldblock2, 4);
-
+
// block 0.
c.cmd = CMD_MIFAREU_WRITEBL;
c.arg[0] = 0;
c.d.asBytes[1] = uid[1];
c.d.asBytes[2] = uid[2];
c.d.asBytes[3] = 0x88 ^ uid[0] ^ uid[1] ^ uid[2];
+ clearCommandBuffer();
SendCommand(&c);
- if (!WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- PrintAndLog("Command execute timeout");
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) {
+ DropField();
+ PrintAndLogEx(WARNING, "Command execute timeout");
return 3;
}
-
+
// block 1.
c.arg[0] = 1;
c.d.asBytes[0] = uid[3];
c.d.asBytes[1] = uid[4];
c.d.asBytes[2] = uid[5];
c.d.asBytes[3] = uid[6];
+ clearCommandBuffer();
SendCommand(&c);
- if (!WaitForResponseTimeout(CMD_ACK,&resp,1500) ) {
- PrintAndLog("Command execute timeout");
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500) ) {
+ DropField();
+ PrintAndLogEx(WARNING, "Command execute timeout");
return 4;
}
c.d.asBytes[1] = oldblock2[1];
c.d.asBytes[2] = oldblock2[2];
c.d.asBytes[3] = oldblock2[3];
+ clearCommandBuffer();
SendCommand(&c);
- if (!WaitForResponseTimeout(CMD_ACK,&resp,1500) ) {
- PrintAndLog("Command execute timeout");
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500) ) {
+ DropField();
+ PrintAndLogEx(WARNING, "Command execute timeout");
return 5;
}
-
+
+ DropField();
return 0;
}
-int CmdHF14AMfuGenDiverseKeys(const char *Cmd){
-
+
+static int CmdHF14AMfuGenDiverseKeys(const char *Cmd){
+
uint8_t iv[8] = { 0x00 };
uint8_t block = 0x07;
-
+
// UL-EV1
//04 57 b6 e2 05 3f 80 UID
//4a f8 4b 19 PWD
uint8_t mifarekeyB[] = { 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5 };
uint8_t dkeyA[8] = { 0x00 };
uint8_t dkeyB[8] = { 0x00 };
-
+
uint8_t masterkey[] = { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xaa,0xbb,0xcc,0xdd,0xee,0xff };
-
+
uint8_t mix[8] = { 0x00 };
uint8_t divkey[8] = { 0x00 };
-
+
memcpy(mix, mifarekeyA, 4);
-
+
mix[4] = mifarekeyA[4] ^ uid[0];
mix[5] = mifarekeyA[5] ^ uid[1];
mix[6] = block ^ uid[2];
mix[7] = uid[3];
-
- des3_context ctx = { 0x00 };
- des3_set2key_enc(&ctx, masterkey);
- des3_crypt_cbc(&ctx // des3_context
- , DES_ENCRYPT // int mode
+ mbedtls_des3_context ctx = { {0} };
+ mbedtls_des3_set2key_enc(&ctx, masterkey);
+
+ mbedtls_des3_crypt_cbc(&ctx // des3_context
+ , MBEDTLS_DES_ENCRYPT // int mode
, sizeof(mix) // length
, iv // iv[8]
, mix // input
, divkey // output
);
- PrintAndLog("3DES version");
- PrintAndLog("Masterkey :\t %s", sprint_hex(masterkey,sizeof(masterkey)));
- PrintAndLog("UID :\t %s", sprint_hex(uid, sizeof(uid)));
- PrintAndLog("Sector :\t %0d", block);
- PrintAndLog("Mifare key :\t %s", sprint_hex(mifarekeyA, sizeof(mifarekeyA)));
- PrintAndLog("Message :\t %s", sprint_hex(mix, sizeof(mix)));
- PrintAndLog("Diversified key: %s", sprint_hex(divkey+1, 6));
-
- PrintAndLog("\n DES version");
-
+ PrintAndLogEx(NORMAL, "-- 3DES version");
+ PrintAndLogEx(NORMAL, "Masterkey :\t %s", sprint_hex(masterkey,sizeof(masterkey)));
+ PrintAndLogEx(NORMAL, "UID :\t %s", sprint_hex(uid, sizeof(uid)));
+ PrintAndLogEx(NORMAL, "Block :\t %0d", block);
+ PrintAndLogEx(NORMAL, "Mifare key :\t %s", sprint_hex(mifarekeyA, sizeof(mifarekeyA)));
+ PrintAndLogEx(NORMAL, "Message :\t %s", sprint_hex(mix, sizeof(mix)));
+ PrintAndLogEx(NORMAL, "Diversified key: %s", sprint_hex(divkey+1, 6));
+
for (int i=0; i < sizeof(mifarekeyA); ++i){
dkeyA[i] = (mifarekeyA[i] << 1) & 0xff;
dkeyA[6] |= ((mifarekeyA[i] >> 7) & 1) << (i+1);
}
-
+
for (int i=0; i < sizeof(mifarekeyB); ++i){
dkeyB[1] |= ((mifarekeyB[i] >> 7) & 1) << (i+1);
dkeyB[2+i] = (mifarekeyB[i] << 1) & 0xff;
}
-
+
uint8_t zeros[8] = {0x00};
uint8_t newpwd[8] = {0x00};
uint8_t dmkey[24] = {0x00};
memcpy(dmkey+8, dkeyB, 8);
memcpy(dmkey+16, dkeyA, 8);
memset(iv, 0x00, 8);
-
- des3_set3key_enc(&ctx, dmkey);
- des3_crypt_cbc(&ctx // des3_context
- , DES_ENCRYPT // int mode
+ mbedtls_des3_set3key_enc(&ctx, dmkey);
+
+ mbedtls_des3_crypt_cbc(&ctx // des3_context
+ , MBEDTLS_DES_ENCRYPT // int mode
, sizeof(newpwd) // length
, iv // iv[8]
, zeros // input
, newpwd // output
);
-
- PrintAndLog("Mifare dkeyA :\t %s", sprint_hex(dkeyA, sizeof(dkeyA)));
- PrintAndLog("Mifare dkeyB :\t %s", sprint_hex(dkeyB, sizeof(dkeyB)));
- PrintAndLog("Mifare ABA :\t %s", sprint_hex(dmkey, sizeof(dmkey)));
- PrintAndLog("Mifare Pwd :\t %s", sprint_hex(newpwd, sizeof(newpwd)));
-
+
+ PrintAndLogEx(NORMAL, "\n-- DES version");
+ PrintAndLogEx(NORMAL, "Mifare dkeyA :\t %s", sprint_hex(dkeyA, sizeof(dkeyA)));
+ PrintAndLogEx(NORMAL, "Mifare dkeyB :\t %s", sprint_hex(dkeyB, sizeof(dkeyB)));
+ PrintAndLogEx(NORMAL, "Mifare ABA :\t %s", sprint_hex(dmkey, sizeof(dmkey)));
+ PrintAndLogEx(NORMAL, "Mifare Pwd :\t %s", sprint_hex(newpwd, sizeof(newpwd)));
+
return 0;
}
// static uint8_t * diversify_key(uint8_t * key){
-
+
// for(int i=0; i<16; i++){
// if(i<=6) key[i]^=cuid[i];
// if(i>6) key[i]^=cuid[i%7];
// static void GenerateUIDe( uint8_t *uid, uint8_t len){
// for (int i=0; i<len; ++i){
-
+
// }
// return;
// }
//------------------------------------
// Menu Stuff
//------------------------------------
+static int CmdHelp(const char *Cmd);
+
static command_t CommandTable[] =
{
- {"help", CmdHelp, 1, "This help"},
- {"dbg", CmdHF14AMfDbg, 0, "Set default debug mode"},
- {"info", CmdHF14AMfUInfo, 0, "Tag information"},
- {"dump", CmdHF14AMfUDump, 0, "Dump Ultralight / Ultralight-C tag to binary file"},
- {"rdbl", CmdHF14AMfURdBl, 0, "Read block - Ultralight"},
- {"wrbl", CmdHF14AMfUWrBl, 0, "Write block - Ultralight"},
- {"crdbl", CmdHF14AMfUCRdBl, 0, "Read block - Ultralight C"},
- {"cwrbl", CmdHF14AMfUCWrBl, 0, "Write block - Ultralight C"},
- {"cauth", CmdHF14AMfucAuth, 0, "Authentication - Ultralight C"},
- {"setpwd", CmdHF14AMfucSetPwd, 1, "Set 3des password - Ultralight-C"},
- {"setuid", CmdHF14AMfucSetUid, 1, "Set UID - MAGIC tags only"},
- {"gen", CmdHF14AMfuGenDiverseKeys , 1, "Generate 3des mifare diversified keys"},
+ {"help", CmdHelp, 1, "This help"},
+ {"dbg", CmdHF14AMfDbg, 0, "Set default debug mode"},
+ {"info", CmdHF14AMfUInfo, 0, "Tag information"},
+ {"dump", CmdHF14AMfUDump, 0, "Dump Ultralight / Ultralight-C / NTAG tag to binary file"},
+ // {"restore", CmdHF14AMfURestore, 0, "Restore a dump onto a MFU MAGIC tag"},
+ {"rdbl", CmdHF14AMfURdBl, 0, "Read block"},
+ {"wrbl", CmdHF14AMfUWrBl, 0, "Write block"},
+ {"cauth", CmdHF14AMfucAuth, 0, "Authentication - Ultralight C"},
+ {"setpwd", CmdHF14AMfucSetPwd, 0, "Set 3des password - Ultralight-C"},
+ {"setuid", CmdHF14AMfucSetUid, 0, "Set UID - MAGIC tags only"},
+ {"gen", CmdHF14AMfuGenDiverseKeys, 1, "Generate 3des mifare diversified keys"},
{NULL, NULL, 0, NULL}
};
int CmdHFMFUltra(const char *Cmd){
- WaitForResponseTimeout(CMD_ACK,NULL,100);
+ (void)WaitForResponseTimeout(CMD_ACK,NULL,100);
CmdsParse(CommandTable, Cmd);
return 0;
}
-int CmdHelp(const char *Cmd){
+static int CmdHelp(const char *Cmd){
CmdsHelp(CommandTable);
return 0;
}
projects / proxmark3-svn / blobdiff