// the client. Signal Processing & decoding is done on the pc. This is the slowest
// variant, but offers the possibility to analyze the waveforms directly.
+#include "cmdhf15.h"
+
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <stdint.h>
-#include "proxmark3.h"
-#include "data.h"
+#include "comms.h"
#include "graph.h"
#include "ui.h"
#include "util.h"
#include "cmdparser.h"
-#include "cmdhf15.h"
#include "iso15693tools.h"
#include "cmdmain.h"
{ 0xE014000000000000LL, 16, "SHARP Corporation Japan" },
{ 0xE015000000000000LL, 16, "ATMEL France" },
- { 0xE016000000000000LL, 16, "EM Microelectronic-Marin SA Switzerland (Skidata)" },
- { 0xE016040000000000LL, 24, "EM-Marin SA (Skidata Keycard-eco); EM4034? no 'read', just 'readmulti'" },
- { 0xE0160c0000000000LL, 24, "EM-Marin SA; EM4035?" },
- { 0xE016100000000000LL, 24, "EM-Marin SA (Skidata); EM4135; 36x64bit start page 13" },
- { 0xE016240000000000LL, 24, "EM-Marin SA (Skidata); EM4233;" },
- { 0xE016940000000000LL, 24, "EM-Marin SA (Skidata); 51x64bit" },
-
+ { 0xE016000000000000LL, 16, "EM Microelectronic-Marin SA Switzerland (Skidata)"},
+ { 0xE016040000000000LL, 24, "EM-Marin SA (Skidata Keycard-eco); EM4034 [IC id = 01] (Read/Write - no AFI)"},
+ { 0xE0160C0000000000LL, 24, "EM-Marin SA (Skidata); EM4035 [IC id = 03] (Read/Write - replaced by 4233)"},
+ { 0xE016100000000000LL, 24, "EM-Marin SA (Skidata); EM4135 [IC id = 04] (Read/Write - replaced by 4233) 36x64bit start page 13"},
+ { 0xE016140000000000LL, 24, "EM-Marin SA (Skidata); EM4036 [IC id = 05] 28pF"},
+ { 0xE016180000000000LL, 24, "EM-Marin SA (Skidata); EM4006 [IC id = 06] (Read Only)"},
+ { 0xE0161C0000000000LL, 24, "EM-Marin SA (Skidata); EM4133 [IC id = 07] 23,5pF (Read/Write)"},
+ { 0xE016200000000000LL, 24, "EM-Marin SA (Skidata); EM4033 [IC id = 08] 23,5pF (Read Only - no AFI / no DSFID / no security blocks)"},
+ { 0xE016240000000000LL, 24, "EM-Marin SA (Skidata); EM4233 [IC id = 09] 23,5pF CustomerID-102"},
+ { 0xE016280000000000LL, 24, "EM-Marin SA (Skidata); EM4233 SLIC [IC id = 10] 23,5pF (1Kb flash memory - not provide High Security mode and QuietStorage feature)" },
+ { 0xE0163C0000000000LL, 24, "EM-Marin SA (Skidata); EM4237 [IC id = 15] 23,5pF"},
+ { 0xE0167C0000000000LL, 24, "EM-Marin SA (Skidata); EM4233 [IC id = 31] 95pF"},
+ { 0xE016940000000000LL, 24, "EM-Marin SA (Skidata); EM4036 [IC id = 37] 95pF 51x64bit "},
+ { 0xE0169c0000000000LL, 24, "EM-Marin SA (Skidata); EM4133 [IC id = 39] 95pF (Read/Write)" },
+ { 0xE016A80000000000LL, 24, "EM-Marin SA (Skidata); EM4233 SLIC [IC id = 42] 97pF" },
+ { 0xE016BC0000000000LL, 24, "EM-Marin SA (Skidata); EM4237 [IC id = 47] 97pF" },
+
{ 0xE017000000000000LL, 16, "KSW Microtec GmbH Germany" },
{ 0xE018000000000000LL, 16, "ZMD AG Germany" },
{ 0xE019000000000000LL, 16, "XICOR, Inc. USA" },
case 0x02: return "The command is not recognised";
case 0x03: return "The option is not supported.";
case 0x0f: return "Unknown error.";
- case 0x10: return "The specified block is not available (doesn’t exist).";
+ case 0x10: return "The specified block is not available (doesn't exist).";
case 0x11: return "The specified block is already -locked and thus cannot be locked again";
case 0x12: return "The specified block is locked and its content cannot be changed.";
case 0x13: return "The specified block was not successfully programmed.";
int i, j;
int max = 0, maxPos = 0;
- int skip = 4;
+ int skip = 2;
- if (GraphTraceLen < 1000) return 0;
+ if (GraphTraceLen < 2000) return 0;
// First, correlate for SOF
- for (i = 0; i < 100; i++) {
+ for (i = 0; i < 200; i++) {
int corr = 0;
for (j = 0; j < arraylen(FrameSOF); j += skip) {
corr += FrameSOF[j] * GraphBuffer[i + (j / skip)];
memset(outBuf, 0, sizeof(outBuf));
uint8_t mask = 0x01;
for (;;) {
- int corr0 = 0, corr1 = 0, corrEOF = 0;
- for (j = 0; j < arraylen(Logic0); j += skip) {
- corr0 += Logic0[j] * GraphBuffer[i + (j / skip)];
- }
- for (j = 0; j < arraylen(Logic1); j += skip) {
- corr1 += Logic1[j] * GraphBuffer[i + (j / skip)];
- }
- for (j = 0; j < arraylen(FrameEOF); j += skip) {
- corrEOF += FrameEOF[j] * GraphBuffer[i + (j / skip)];
- }
- // Even things out by the length of the target waveform.
- corr0 *= 4;
- corr1 *= 4;
-
- if (corrEOF > corr1 && corrEOF > corr0) {
- PrintAndLog("EOF at %d", i);
- break;
+ int corr0 = 0, corr00 = 0, corr01 = 0, corr1 = 0, corrEOF = 0;
+ for(j = 0; j < arraylen(Logic0); j += skip) {
+ corr0 += Logic0[j]*GraphBuffer[i+(j/skip)];
+ }
+ corr01 = corr00 = corr0;
+ for(j = 0; j < arraylen(Logic0); j += skip) {
+ corr00 += Logic0[j]*GraphBuffer[i+arraylen(Logic0)/skip+(j/skip)];
+ corr01 += Logic1[j]*GraphBuffer[i+arraylen(Logic0)/skip+(j/skip)];
+ }
+ for(j = 0; j < arraylen(Logic1); j += skip) {
+ corr1 += Logic1[j]*GraphBuffer[i+(j/skip)];
+ }
+ for(j = 0; j < arraylen(FrameEOF); j += skip) {
+ corrEOF += FrameEOF[j]*GraphBuffer[i+(j/skip)];
+ }
+ // Even things out by the length of the target waveform.
+ corr00 *= 2;
+ corr01 *= 2;
+ corr0 *= 4;
+ corr1 *= 4;
+
+ if(corrEOF > corr1 && corrEOF > corr00 && corrEOF > corr01) {
+ PrintAndLog("EOF at %d", i);
+ break;
} else if (corr1 > corr0) {
i += arraylen(Logic1) / skip;
outBuf[k] |= mask;
return 0;
}
+int HF15Reader(const char *Cmd, bool verbose)
+{
+ uint8_t uid[8];
+
+ if (!getUID(uid)) {
+ if (verbose) PrintAndLog("No Tag found.");
+ return 0;
+ }
+
+ PrintAndLog("Tag UID : %s",sprintUID(NULL,uid));
+ PrintAndLog("Tag Info: %s",getTagInfo(uid));
+ return 1;
+}
+
int CmdHF15Reader(const char *Cmd)
{
UsbCommand c = {CMD_READER_ISO_15693, {strtol(Cmd, NULL, 0), 0, 0}};
// PrintAndLog("bn=%i",blocknum);
} else {
PrintAndLog("Tag returned Error %i: %s",recv[1],TagErrorStr(recv[1]));
- return 0;
+ return 1;
}
} // else PrintAndLog("crc");
} // else PrintAndLog("r null");
// PrintAndLog("CRC Failed");
// else
// PrintAndLog("Tag returned Error %i: %s",recv[1],TagErrorStr(recv[1]));
- return 0;
+ return 1;
}
projects / proxmark3-svn / blobdiff