CHG: removed a delay in readblock

[proxmark3-svn] / client / flash.c

diff --git a/client/flash.c b/client/flash.c
index 4e222ece2c213a3c898f8ecfb60890256dc3e63a..b0ae46b3ba95796254699c8cc859b2aba7a2fbf0 100644 (file)
--- a/client/flash.c
+++ b/client/flash.c
@@ -17,6 +17,7 @@
 #include "elf.h"
 #include "proxendian.h"
 #include "usb_cmd.h"
 #include "elf.h"
 #include "proxendian.h"
 #include "usb_cmd.h"

+#include "at91sam7s512.h"

 
 void SendCommand(UsbCommand* txcmd);
 void ReceiveCommand(UsbCommand* rxcmd);
 
 void SendCommand(UsbCommand* txcmd);
 void ReceiveCommand(UsbCommand* rxcmd);


@@ -27,7 +28,13 @@ int OpenProxmark(size_t i);
 unsigned int current_command = CMD_UNKNOWN;
 
 #define FLASH_START            0x100000
 unsigned int current_command = CMD_UNKNOWN;
 
 #define FLASH_START            0x100000

-#define FLASH_SIZE             (256*1024)
+
+#ifdef HAS_512_FLASH
+# define FLASH_SIZE             (512*1024)
+#else
+# define FLASH_SIZE             (256*1024)
+#endif
+

 #define FLASH_END              (FLASH_START + FLASH_SIZE)
 #define BOOTLOADER_SIZE        0x2000
 #define BOOTLOADER_END         (FLASH_START + BOOTLOADER_SIZE)
 #define FLASH_END              (FLASH_START + FLASH_SIZE)
 #define BOOTLOADER_SIZE        0x2000
 #define BOOTLOADER_END         (FLASH_START + BOOTLOADER_SIZE)


@@ -275,7 +282,7 @@ static int get_proxmark_state(uint32_t *state)
 {
        UsbCommand c;
        c.cmd = CMD_DEVICE_INFO;
 {
        UsbCommand c;
        c.cmd = CMD_DEVICE_INFO;

-  SendCommand(&c);
+       SendCommand(&c);

        UsbCommand resp;
        ReceiveCommand(&resp);
 
        UsbCommand resp;
        ReceiveCommand(&resp);
 


@@ -352,12 +359,11 @@ static int enter_bootloader(char *serial_port_name)
        return -1;
 }
 
        return -1;
 }
 

-static int wait_for_ack(void)
+static int wait_for_ack(UsbCommand *ack)

 {
 {

-  UsbCommand ack;
-       ReceiveCommand(&ack);
-       if (ack.cmd != CMD_ACK) {
-               printf("Error: Unexpected reply 0x%04"llx" (expected ACK)\n", ack.cmd);
+       ReceiveCommand(ack);
+       if (ack->cmd != CMD_ACK) {
+               printf("Error: Unexpected reply 0x%04"llx" (expected ACK)\n", ack->cmd);

                return -1;
        }
        return 0;
                return -1;
        }
        return 0;


@@ -389,7 +395,7 @@ int flash_start_flashing(int enable_bl_writes,char *serial_port_name)
                        c.arg[2] = 0;
                }
                SendCommand(&c);
                        c.arg[2] = 0;
                }
                SendCommand(&c);

-               return wait_for_ack();
+               return wait_for_ack(&c);

        } else {
                fprintf(stderr, "Note: Your bootloader does not understand the new START_FLASH command\n");
                fprintf(stderr, "      It is recommended that you update your bootloader\n\n");
        } else {
                fprintf(stderr, "Note: Your bootloader does not understand the new START_FLASH command\n");
                fprintf(stderr, "      It is recommended that you update your bootloader\n\n");


@@ -409,7 +415,18 @@ static int write_block(uint32_t address, uint8_t *data, uint32_t length)
        c.arg[0] = address;
        memcpy(c.d.asBytes, block_buf, length);
   SendCommand(&c);
        c.arg[0] = address;
        memcpy(c.d.asBytes, block_buf, length);
   SendCommand(&c);

-  return wait_for_ack();
+       int ret = wait_for_ack(&c);
+       if (ret && c.arg[0]) {
+               uint32_t lock_bits = c.arg[0] >> 16;
+               bool lock_error = c.arg[0] & AT91C_MC_LOCKE;
+               bool prog_error = c.arg[0] & AT91C_MC_PROGE;
+               bool security_bit = c.arg[0] & AT91C_MC_SECURITY;
+               printf("%s", lock_error?"       Lock Error\n":"");
+               printf("%s", prog_error?"       Invalid Command or bad Keyword\n":"");
+               printf("%s", security_bit?"       Security Bit is set!\n":"");
+               printf("       Lock Bits:      0x%04x\n", lock_bits);
+       }
+       return ret;

 }
 
 // Write a file's segments to Flash
 }
 
 // Write a file's segments to Flash